Creation of cationic iridium(III) complexes with aggregation-induced phosphorescent emission (AIPE) properties by increasing rotation groups on carbazole peripheries

Three cationic iridium complexes containing 4,7-bis(3,6-di-tert-butyl-9H-carbazol-9-yl)-1,10-phenanthroline (L(1)) and 4,7-bis(3',6'-di-tert-butyl-6-(3,6-di-tert-butyl-9H-carbazol-9-yl)-3,9'-bi(9H-carbazol)-9-yl)-1,10-phenanthroline (L(2)) as the ancillary ligands, namely, [Ir(ppy)(2)(L(1))]PF(6) (1), [Ir(ppy)(2)(L(2))]PF(6) (2) and [Ir(oxd)(2)(L(2))]PF(6) (3) (ppy is 2-phenylpyridine, oxd is 2,5-diphenyl-1,3,4-oxadiazole), have been designed and prepared. With more intramolecular rotational units on the ancillary ligand (L(2)), 2 and 3 possess a unique aggregation-induced phosphorescent emission (AIPE) property. This phenomenon was unprecedentedly observed in the cationic iridium(III) complexes. In order to investigate the underlying mechanism of this AIPE behavior, their photophysical, temperature-dependent aggregation properties as well as theoretical calculations, were performed. The results suggest that restricted intramolecular rotation is responsible for the AIPE of cationic complexes. Moreover, photoluminescent quantum yields in the neat film, thermal stabilities and off/on luminescence switching of 2 were investigated, revealing its potential application as a candidate for LECs and organic vapor sensing.     

Polymerizable cationic iridium(III) complexes exhibiting color tunable light emission and their corresponding conducting metallopolymers

Cyclometalated iridium(III) complexes have been synthesized for use in a variety of photophysical applications, including polymer light emitting diodes (PLEDs). A series of new complexes with one electrochemically polymerizable ligand and two phenylpyridine(ppy)-based ligands have been prepared: [Ir(ppy)₂L][PF₆](1), [Ir(F-mppy)₂L][PF₆](2), and [Ir(Br-mppy)₂L][PF₆](3), where L = 3,8-bis(2,2′-bithien-5-yl)-1,10-phenanthroline. The ancillary ppy ligands can be easily varied synthetically to tune emission color of the monomer from blue–green to red. The solid state structure of complex 1 has been obtained by single crystal X-ray crystallography. Conducting polymer materials have been prepared by electropolymerization of monomers and were characterized through XPS analysis and spectroscopic studies.     

The role of substituents on functionalized 1,10-phenanthroline in controlling the emission properties of cationic iridium(III) complexes of interest for electroluminescent devices

The photophysical and electrochemical properties of the novel complexes [Ir(ppy)(2)(5-X-1,10-phen)][PF(6)] (ppy = 2-phenylpyridine, phen = phenanthroline, X = NMe(2), NO(2)), [Ir(pq)(2)(5-X-1,10-phen)][PF(6)] (pq = 2-phenylquinoline, X = H, Me, NMe(2), NO(2)), [Ir(ppy)2(4-Me,7-Me-1,10-phen)][PF(6)], [Ir(ppy)2(5-Me,6-Me-1,10-phen)][PF(6)], [Ir(ppy)(2)(2-Me,9-Me-1,10-phen)][PF(6)], and [Ir(pq)2(4-Ph,7-Ph-1,10-phen)][PF(6)] have been investigated and compared with those of the known reference complexes [Ir(ppy)(2)(4-Me or 5-H or 5-Me-1,10-phen)][PF(6)] and [Ir(ppy)(2)(4-Ph,7-Ph-1,10-phen)][PF(6)], showing how the nature and number of the phenanthroline substituents tune the color of the emission, its quantum yield, and the emission lifetime. It turns out that the quantum yield is strongly dependent on the nonradiative decay. The geometry, ground state, electronic structure, and excited electronic states of the investigated complexes have been calculated on the basis of density functional theory (DFT) and time-dependent DFT approaches, thus substantiating the electrochemical measurements and providing insight into the electronic origin of the absorption spectra and of the lowest excited states involved in the light emission process. These results provide useful guidelines for further tailoring of the photophysical properties of ionic Ir(III) complexes.     

1,12-Diazaperylene and 2,11-dialkylated-1,12-diazaperylene iridium(iii) complexes [Ir(C^N)(2)(N^N)]PF(6): new supramolecular assemblies

A series of new monocationic iridium(iii) complexes [Ir(C^N)(2)(N^N)]PF(6) with "large-surface"α,α'-diimin ligands N^N (dap = 1,12-diazaperylene, dmedap = 2,11-dimethyl-1,12-diazaperylene, dipdap = 2,11-diisopropyl-1,12-diazaperylene) and different cyclometalating ligands C^N (piq = 1-phenylisoquinoline, bzq = benzo[h]quinoline, ppz = 1-phenylpyrazole, thpy = 2-(2-thienyl)pyridine, ppy = 2-phenylpyridine, meppy = 2-(4-methylphenyl)pyridine, dfppy = 2-(2,4-difluorophenyl)pyridine) were synthesized. The solid structures of the complexes [Ir(piq)(2)(dap)]PF(6), [Ir(bzq)(2)(dap)]PF(6), [Ir(ppy)(2)(dipdap)]PF(6), [Ir(piq)(2)(dmedap)]PF(6), [Ir(ppy)(2)(dap)]PF(6) and [Ir(ppz)(2)(dap)]PF(6) are reported. In [Ir(piq)(2)(dap)]PF(6), the dap ligand and one of the piq ligands of each cationic complex are involved in π-π stacking interactions forming supramolecular channels running along the crystallographic c axis. In the crystalline [Ir(bzq)(2)(dap)]PF(6)π-π stacking interactions between the metal complexes lead to the formation of a 2D layer structure. In addition, CH-π interactions were found in all compounds, which are what stabilizes the solid structure. In particular, a significant number of them were found in [Ir(piq)(2)(dap)]PF(6) and [Ir(bzq)(2)(dap)]PF(6). The crystal structures of [Ir(ppy)(2)(dipdap)]PF(6) and [Ir(ppy)(2)(dmedap)]PF(6) are also presented, being the first examples of bis-cyclometalated iridium(iii) complexes with phenanthroline-type α,α'-diimin ligands bearing bulky alkyl groups in the neighbourhood of the N-donor atoms. These ligands implicate a distorted octahedral coordination geometry that in turn destabilized the Ir-N(N^N) bonds. The new iridium(iii) complexes are not luminescent. All compounds show an electrochemically irreversible anodic peak between 1.15 and 1.58 V, which is influenced by the different cyclometalated ligands. All of the new complexes show two reversible successive one-electron "large-surface" ligand-centred reductions around -0.70 V and -1.30 V. Electrospray ionisation mass spectrometry (ESI-MS) and collision induced decomposition (CID) measurements were used to investigate the stability of the new complexes. Thereby, the stability agreed well with the order of the Ir-N(N^N) bond lengths.     

Cationic bis-cyclometallated iridium(III) phenanthroline complexes with pendant fluorenyl substituents: synthesis, redox, photophysical properties and light-emitting cells

We report the synthesis, characterisation, photophysical and electrochemical properties of a series of cationic cyclometallated Ir(III) complexes of general formula [Ir(ppy)(2)(phen)]PF(6) (ppy=2-phenylpyridine, phen=a substituted phenanthroline). A feature of these complexes is that the phen ligands are substituted with one or two 9,9-dihexylfluorenyl substituents to provide extended pi conjugation, for example, the 3-[2-(9,9-dihexylfluorenyl)]phenanthroline and 3,8-bis[2-(9,9-dihexylfluorenyl)]phenanthroline ligands afford complexes 6 and 9, respectively. A single-crystal X-ray diffraction study of a related complex 18 containing the 3,8-bis(4-iodophenyl)phenanthroline ligand, revealed an octahedral coordination of the Ir atom, in which the metallated C atoms of the ppy ligands occupy cis positions. The complexes 6 and 9 displayed reversible oxidation waves in cyclic voltammetric studies (E(ox)(1/2)=+1.18 and +1.20 V, respectively, versus Ag/Ag(+) in CH(2)Cl(2)) assigned to the metal-centred Ir(III)/Ir(IV) couple. The complexes exhibit strong absorption in the UV region in solution spectra, due to spin-allowed ligand-centred (LC) (1)pi-pi* transitions; moderately intense bands occur at approximately 360-390 nm which are red-shifted with increased ligand length. The photoluminescence spectra of all the complexes were characterised by a broad band at lambda(max) approximately 595 nm assigned to a combination of (3)MLCT and (3)pi-->pi* states. The long emission lifetimes (in the microsecond time-scale) are indicative of phosphorescence: the increased ligand conjugation length in complexes 9 and 17 leads to increased lifetimes for the complexes (tau=2.56 and 2.57 micros in MeCN, respectively) compared to monofluorenyl analogues 6 and 15 (tau=1.43 and 1.39 micros, respectively). DFT calculations of the geometries and electronic structures of complexes 6', 9' (for both singlet ground state (S(0)) and triplet first excited (T(1)) states) and 18 have been performed. In the singlet ground state (S(0)) HOMO orbitals in the complexes are spread between the Ir atom and benzene rings of the phenylpyridine ligand, whereas the LUMO is mainly located on the phenanthroline ligand. Analysis of orbital localisations for the first excited (T(1)) state have been performed and compared with spectroscopic data. Spin-coated light-emitting cells (LECs) have been fabricated with the device structures ITO/PEDOT:PSS/Ir complex/Al, or Ba capped with Al (ITO=indium tin oxide, PEDOT=poly(3,4-ethylenedioxythiophene), PSS=poly(styrene) sulfonate). A maximum brightness efficiency of 9 cd A(-1) has been attained at a bias of 9 V for 17 with a Ba/Al cathode. The devices operated in air with no reduction in efficiency after storage for one week in air.     

Control of intramolecular π-π stacking interaction in cationic iridium complexes via fluorination of pendant phenyl rings

Intramolecular π-π stacking interaction in one kind of phosphorescent cationic iridium complexes has been controlled through fluorination of the pendant phenyl rings on the ancillary ligands. Two blue-green-emitting cationic iridium complexes, [Ir(ppy)(2)(F2phpzpy)]PF(6) (2) and [Ir(ppy)(2)(F5phpzpy)]PF(6) (3), with the pendant phenyl rings on the ancillary ligands substituted with two and five fluorine atoms, respectively, have been synthesized and compared to the parent complex, [Ir(ppy)(2)(phpzpy)]PF(6) (1). Here Hppy is 2-phenylpyridine, F2phpzpy is 2-(1-(3,5-difluorophenyl)-1H-pyrazol-3-yl)pyridine, F5phpzpy is 2-(1-pentafluorophenyl-1H-pyrazol-3-yl)-pyridine, and phpzpy is 2-(1-phenyl-1H-pyrazol-3-yl)pyridine. Single crystal structures reveal that the pendant phenyl rings on the ancillary ligands stack to the phenyl rings of the ppy ligands, with dihedral angles of 21°, 18°, and 5.0° between least-squares planes for complexes 1, 2, and 3, respectively, and centroid-centroid distances of 3.75, 3.65, and 3.52 ? for complexes 1, 2, and 3, respectively, indicating progressively reinforced intramolecular π-π stacking interactions from complexes 1 to 2 and 3. Compared to complex 1, complex 3 with a significantly reinforced intramolecular face-to-face π-π stacking interaction exhibits a significantly enhanced (by 1 order of magnitude) photoluminescent efficiency in solution. Theoretical calculations reveal that in complex 3 it is unfavorable in energy for the pentafluorophenyl ring to swing by a large degree and the intramolecular π-π stacking interaction remains on the lowest triplet state.     

Electrochemical and phosphorescent properties of new mixed-ligand Ir(II) complexes coordinated with both terpyridine and various bipyridine derivatives.

Seven useful mixed-ligand complexes in the form of [Ir(terpy)(L)Cl]2+ were prepared and their spectroscopic and electrochemical properties were investigated. The ligands used were terpy = 2,2':6',2'-terpyridine, L = 2,2'-bipyridine, 4,4'-dimethyl-2,2'-bipyridine, 4,4'-diphenyl-2,2'-bipyridine, 1,10-phenanthroline, 5-phenyl-1,10-phenanthroline, 4,7-diphenyl-1,10-phenanthroline, 2,3-bis(2-pyridyl)pyrazine. Synthetic methods were developed by a sequential ligand-replacement which occurred in the reaction vessel using a microwave oven. All complexes showed that LUMOs are based on the pi-system contribution of the terpyridine ligand for [Ir(terpy)(bpy)Cl]2+, [Ir(terpy)(dmbpy)Cl]2+, [Ir(terpy)(dpbpy)Cl]2+, [Ir(terpy)(phen)Cl]2+, [Ir(terpy)(dpphen)Cl]2+ and [Ir(terpy)(phphen)Cl]2+. On the other hand, the LUMO in the [Ir(terpy)(bppz)Cl]2+ complex is localized on the pi-system of the bppz ligand, whereas the HOMOs in the iridium complexes are localized on the terpyridine ligand. It was found that Ir(terpy)(L)Cl emits in a fluid solution at room temperature. The ancillary ligands, such as terpy and bpy, have been explored to extend the lifetime of the triplet 3(pi-pi') excited states of Ir(III) terpyridine complexes. Ir(III) terpyridine units with an electron donor (dmbpy) or electron acceptor substituents (terpy, dpbpy, phphen, dpphen and bppz) are found to decrease the energy of the 3LC states for use as photosensitizer molecular components in supramolecular devices. The spectroscopic and electrochemical details are also reported herein.     

Light-emitting electrochemical cells based on a supramolecularly-caged phenanthroline-based iridium complex

The complex [Ir(ppy)(2)(pphen)][PF(6)] (Hppy = 2-phenylpyridine, pphen = 2-phenyl-1,10-phenanthroline) has been prepared and evaluated as an electroluminescent component for light-emitting electrochemical cells (LECs). Like in analogous LECs using bpy-based iridium(III) complexes a significant enhancement of the device stability is observed.     

Reactions of cadmium(II) nitrate with 4-(trimethylammonio)benzenethiolate in the presence of N-donor ligands

Reactions of Cd(NO(3))(2)·4H(2)O with TabHPF(6) (TabH = 4-(trimethylammonio)benzenethiol) and Et(3)N in the presence of NH(4)SCN and five other N-donor ligands such as 2,2'-bipyridine (2,2'-bipy), phenanthroline (phen), 2,9-dimethyl-1,10-phenanthroline (2,9-dmphen), 2,6-bis(pyrazd-3-yl)pyridine (bppy) and 2,6-bis(3,5-dimethyl-1H-pyrazol-1-yl)pyridine (bdmppy) gave rise to a family of Cd(II)/thiolate complexes of N-donor ligands, {[Cd(2)(μ-Tab)(4)(NCS)(2)](NO(3))(2)·MeOH}(n) (1), [Cd(2)(μ-Tab)(2)(L)(4)](PF(6))(4) (2: L = 2,2'-bipy; 3: L = phen), [Cd(Tab)(2)(L)](PF(6))(2) (4: L = 2,9-dmphen; 5: L = bppy), and [Cd(2)(μ-Tab)(2)(Tab)(2)(bdmppy)](2)(PF(6))(8)·H(2)O (6·H(2)O). These compounds were characterized by elemental analysis, IR spectra, UV-Vis spectra, (1)H NMR, electrospray ionization (ESI) mass spectra and single-crystal X-ray diffraction. For 1, each [Cd(NCS)](+) fragment is connected to its equivalents via a pair of Tab bridges to a one-dimensional chain. For 2 and 3, two [Cd(2,2'-bipy)(2)](2+) or [Cd(phen)(2)](2+) units are linked by a pair of Tab bridges to form a cationic dimeric structure. The Cd atom in [Cd(Tab)(2)(L)](2+) dication of 4 or 5 is coordinated by two Tab ligands and chelated by two N atoms from 2,9-dmphen (4) or three N atoms from bppy (5), forming a distorted tetrahedral (4) or trigonal bipyramidal (5) coordination geometry. For 6, each of two [Cd(Tab)(bdmppy)] fragments is linked to one [(Tab)Cd(μ-Tab)(2)Cd(Tab)] fragment via two Tab bridges to generate a unique cationic zigzag tetrameric structure where the Cd centers take a tetrahedral or a trigonal bipyramidal coordination geometry. The results may provide an interesting insight into mimicking the coordination spheres of the Cd(II) sites of metallothioneins and their interactions with various N-donor ligands encountered in nature.     

A cyclometalated iridium(III) complex with enhanced phosphorescence emission in the solid state (EPESS): synthesis, characterization and its application in bioimaging

Iridium(III) complexes with intense phosphorescence in solution have been widely applied in organic light-emitting diodes, chemosensors and bioimaging. However, little attention has been paid to iridium(III) complexes showing weak phosphorescence in solution and enhanced phosphorescence emission in the solid state (EPESS). In the present study, two β-diketonate ligands with different degrees of conjugation, 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (HL1) and 1-phenyl-3-methyl-4-phenylacetyl-5-pyrazolone (HL2), have been synthesized to be used as ancillary ligands for two iridium(III) complexes, Ir(ppy)(2)(L1) and Ir(ppy)(2)(L2) (Hppy = 2-phenylpyridine). The two complexes have been characterized by single-crystal X-ray crystallography, (1)H NMR and elemental analysis. Interestingly, Ir(ppy)(2)(L1) is EPESS-active whereas Ir(ppy)(2)(L2) exhibits moderately intense emission both in solution and as a neat film, indicating that the degree of conjugation of the β-diketone ligands determines the EPESS-activity. The single-crystal X-ray analysis has indicated that there are π-π interactions between the adjacent ppy ligands in Ir(ppy)(2)(L1) but not in Ir(ppy)(2)(L2). Finally, EPESS-active Ir(ppy)(2)(L1) has been successfully embedded in polymer nanoparticles and used as a luminescent label in bioimaging.     

Synthesis, structure, and reactivity of rhodium and iridium complexes of the chelating bis-sulfoxide tBuSOC2H4SOtBu. Selective O-H activation of 2-hydroxy-isopropyl-pyridine

The chloro-bridged rhodium and iridium complexes [M2(BTSE)2Cl2] (M = Rh 1, Ir 2) bearing the chelating bis-sulfoxide tBuSOC2H4SOtBu (BTSE) were prepared by the reaction of [M2(COE)4Cl2] (M = Rh, Ir; COE = cyclooctene) with an excess of a racemic mixture of the ligand. The cationic compounds [M(BTSE)2][PF6] (M = Rh 3, Ir 4), bearing one S- and one O-bonded sulfoxide, were also obtained in good yields. The chloro-bridges in 2 can be cleaved with 2-methyl-6-pyridinemethanol and 2-aminomethyl pyridine, resulting in the iridium(I) complexes [Ir(BTSE)(Py)(Cl)] (Py = 2-methyl-6-pyridinemethanol 5, 2-aminomethyl-pyridine 6). In case of the bulky 2-hydroxy- isopropyl-pyridine, selective OH oxidative addition took place, forming the Ir(III)-hydride [Ir(BTSE)(2-isopropoxy-pyridine)(H)(Cl)] 7, with no competition from the six properly oriented C-H bonds. The cationic rhodium(I) and iridium(I) compounds [M(BTSE)(2-aminomethyl-pyridine)][X] (M = Rh 8, Ir 10), [Rh(BTSE)(2-hydroxy- isopropyl-pyridine)][X] 9(stabilized by intramolecular hydrogen bonding), [Ir(BTSE)(pyridine)2][PF6] 12, [Ir(BTSE)(alpha-picoline)2][PF6] 13, and [Rh(BTSE)(1,10-phenanthroline)][PF6] 14 were prepared either by chloride abstraction from the dimeric precursors or by replacement of the labile oxygen bonded sulfoxide in 3 or 4. Complex 14 exhibits a dimeric structure in the solid state by pi-pi stacking of the phenanthroline ligands.     

Novel dinuclear luminescent compounds based on iridium(III) cyclometalated chromophores and containing bridging ligands with ester-linked chelating sites

The syntheses and study of the spectroscopic, redox, and photophysical properties of a new set of species based on Ir(III) cyclometalated building blocks are reported. This set includes three dinuclear complexes, that is, the symmetric (with respect to the bridging ligand) diiridium species [(ppy)(2)Ir(mu-L-OC(O)-C(O)O-L)Ir(ppy)(2)][PF(6)](2) (5; ppy = 2-phenylpyridine anion; L-OC(O)-C(O)O-L = bis[4-(6'-phenyl-2,2'-bipyridine-4'-yl)phenyl]-benzene-1,4-dicarboxylate), the asymmetric diiridium species [(ppy)(2)Ir(mu-L-OC(O)-L)Ir(ppy)(2)][PF(6)](2) (3; L-OC(O)-L = 4-([(6'-phenyl-2,2'-bipyridine-4'-yl)benzoyloxy]phenyl)-6'-phenyl-2,2'-bipyridine), and the mixed-metal Ir-Re species [(ppy)(2)Ir(mu-L-OC(O)-L)Re(CO)(3)Br][PF(6)] (4). Syntheses, characterization, and spectroscopic, photophysical, and redox properties of the model mononuclear compounds [Ir(ppy)(2)(L-OC(O)-L)][PF(6)] (2) and [Re(CO)(3)(L-COOH)Br] (6; L-COOH = 4'-(4-carboxyphenyl)-6'-phenyl-2,2'-bipyridine) are also reported, together with the syntheses of the new bridging ligands L-OC(O)-L and L-OC(O)-C(O)O-L. The absorption spectra of all the complexes are dominated by intense spin-allowed ligand-centered (LC) bands and by moderately intense spin-allowed metal-to-ligand charge-transfer (MLCT) bands. Spin-forbidden MLCT absorption bands are also visible as low-energy tails at around 470 nm for all the complexes. All the new species exhibit metal-based irreversible oxidation and bipyridine-based reversible reduction processes in the potential window investigated (between +1.80 and -1.70 V vs SCE). The redox behavior indicates that the metal-based orbitals are only weakly interacting in dinuclear systems, whereas the two chelating halves of the bridging ligands exhibit noticeable electronic interactions. All the complexes are luminescent both at 77 K and at room temperature, with emission originating from triplet MLCT states. The luminescence properties are temperature- and solvent-dependent, in accord with general theories: emission lifetimes and quantum yields increase on passing from acetonitrile to dichloromethane fluid solution and from room-temperature fluid solution to 77 K rigid matrix. In the dinuclear mixed-chromophore species 3 and 4, photoinduced energy transfer across the ester-linked bridging ligands seems to occur with low efficiency.     

Stereochemistry controlled by an asymmetric sulfur atom, and a rare example of a kryptoracemate

The ligands 4-methylthio-6-phenyl-2,2'-bipyridine (1) and the corresponding sulfoxide (2) and sulfone (3) have been synthesized and characterized in solution, and in the solid state by single crystal X-ray diffraction. Compounds 2 and 3 crystallize in the same space group (C2/c) with similar unit cell parameters; a small increase in the unit cell volume allows for the presence of the extra oxygen atom in 3. The sulfoxide and sulfone groups adopt conformations that permit intramolecular OHC(aryl) hydrogen bonds. The complexes [Ir(ppy)(2)L][PF(6)] with L = 1, 2 or 3 have been prepared and characterized. The asymmetric sulfur atom in ligand 2 gives rise to pairs of diastereoisomers of the complex which can be distinguished in the (1)H and (13)C NMR spectra. In solution, exchange of [PF(6)](-) by [Δ-TRISPHAT](-) gives rise to four diastereoisomers and we observed good dispersion of (1)H NMR resonances, especially for those assigned to protons close to the asymmetric sulfur atom. A single crystal X-ray diffraction study of 2{[Ir(ppy)(2)(3)][PF(6)]}·CHCl(3)·3H(2)O reveals that the complex crystallizes in the chiral space group P2(1)2(1)2(1), the asymmetric unit containing crystallographically independent Δ- and Λ-[Ir(ppy)(2)(3)](+) cations. This provides a rare example of a so-called kryptoracemate in the solid state. In MeCN solution, [Ir(ppy)(2)(1)][PF(6)], [Ir(ppy)(2)(2)][PF(6)] and [Ir(ppy)(2)(3)][PF(6)] are weakly emissive (λ(em) = 600, 647 and 672 nm, respectively) and preliminary studies of the electroluminescent properties of [Ir(ppy)(2)(2)][PF(6)] indicate that the complexes are not suitable candidates for LECs.     

Synthesis, structures, and properties of ruthenium(II) complexes of N-(1,10-phenanthrolin-2-yl)imidazolylidenes

Mononuclear ruthenium complexes [RuCl(L1)(CH(3)CN)(2)](PF(6)) (2a), [RuCl(L2)(CH(3)CN)(2)](PF(6)) (2b), [Ru(L1)(CH(3)CN)(3)](PF(6))(2) (4a), [Ru(L2)(CH(3)CN)(3)](PF(6))(2) (4b), [Ru(L2)(2)](PF(6))(2) (5), [RuCl(L1)(CH(3)CN)(PPh(3))](PF(6)) (6), [RuCl(L1)(CO)(2)](PF(6)) (7), and [RuCl(L1)(CO)(PPh(3))](PF(6)) (8), and a tetranuclear complex [Ru(2)Ag(2)Cl(2)(L1)(2)(CH(3)CN)(6)](PF(6))(4) (3) containing 3-(1,10-phenanthrolin-2-yl)-1-(pyridin-2-ylmethyl)imidazolylidene (L1) and 3-butyl-1-(1,10-phenanthrolin-2-yl)imidazolylidene (L2) have been prepared and fully characterized by NMR, ESI-MS, UV-vis spectroscopy, and X-ray crystallography. Both L1 and L2 act as pincer NNC donors coordinated to ruthenium (II) ion. In 3, the Ru(II) and Ag(I) ions are linked by two bridging Cl(-) through a rhomboid Ag(2)Cl(2) ring with two Ru(II) extending to above and down the plane. Complexes 2-8 show absorption maximum over the 354-428 nm blueshifted compared to Ru(bpy)(3)(2+) due to strong σ-donating and weak π-acceptor properties of NHC ligands. Electrochemical studies show Ru(II)/Ru(III) couples over 0.578-1.274 V.     

New luminescent cyclometalated iridium(III) diimine complexes as biological labeling reagents

We report the synthesis, characterization, and photophysical and electrochemical properties of thirty luminescent cyclometalated iridium(III) diimine complexes [Ir(N-C)(2)(N-N)](PF(6)) (HN-C = 2-phenylpyridine, Hppy; 2-(4-methylphenyl)pyridine, Hmppy; 3-methyl-1-phenylpyrazole, Hmppz; 7,8-benzoquinoline, Hbzq; 2-phenylquinoline, Hpq; N-N = 4-amino-2,2'-bipyridine, bpy-NH(2); 4-isothiocyanato-2,2'-bipyridine, bpy-ITC; 4-iodoacetamido-2,2'-bipyridine, bpy-IAA; 5-amino-1,10-phenanthroline, phen-NH(2); 5-isothiocyanato-1,10-phenanthroline, phen-ITC; 5-iodoacetamido-1,10-phenanthroline, phen-IAA). The X-ray crystal structure of [Ir(mppz)(2)(bpy-NH(2))](PF(6)) has also been investigated. Upon irradiation, all the complexes display intense and long-lived luminescence under ambient conditions and in 77-K glass. On the basis of the photophysical and electrochemical data, the emission of most of these complexes is assigned to an excited state of predominantly triplet metal-to-ligand charge-transfer ((3)MLCT) (dpi(Ir) --> pi(N-N)) character. In some cases, triplet intraligand ((3)IL) (pi --> pi)(N-N or N-C(-)) excited states have also been identified. In view of the specific reactivity of the isothiocyanate and iodoacetamide moieties toward the primary amine and sulfhydryl groups, respectively, we have labeled various biological molecules with a selection of these luminescent iridium(III) complexes. The photophysical properties of the luminescent conjugates have been investigated. In addition, a heterogeneous assay for digoxin has also been designed on the basis of the recognition of biotinylated anti-digoxin by avidin labeled with one of the luminescent iridium(III) complexes.     

Cyclometallated iridium(III) complexes with substituted 1,10-phenanthrolines: a new class of highly active organometallic second order NLO-phores with excellent transparency with respect to second harmonic emission

[Ir(ppy)(2)(5-R-1,10-phen)][PF(6)] (ppy = cyclometallated 2-phenylpyridine, phen = phenanthroline, R = H, Me, NMe(2), NO(2)) and [Ir(ppy)(2)(4-R',7-R'-1,10-phen)][PF(6)] (R' = Me, Ph) complexes are characterized by one of the highest second order NLO response (measured by the EFISH technique) reported for a metal complex, mainly due (as suggested by a theoretical SOS-TDDFT investigation) to MLCT processes from the ppy-Ir based moiety acting as donor push system to pi* orbitals of phen, acting as an acceptor pull system; the good transparency to the second harmonic emission renders these NLO-phores appealing as building blocks for molecular materials with second harmonic generation.     

Red Emission of Eu(III) Complex Based on 1-(7-(tert-butyl)-9-ethyl-9H- carbazol-2-yl)-4,4,4-trifluorobutane-1,3-dione Excited by Blue Light

A new Eu(III) complex, EuL3(phen), was synthesized, where L is the abbreviation of de-protonated 1-(7-(tert-butyl)-9-ethyl-9H-carbazol-2-yl)-4,4,4-trifluorobutane-1,3-dione (HL), phen is the abbreviation of 1,10-phenanthroline. The Eu(III) complex was characterized by element analysis, IR, 1H NMR, UV-visible absorption spectroscopy, thermogravimetric anal-ysis (TGA), and photoluminescence measurements (PL). TGA shows that thermal stability of the complex is up to 325 oC. PL measurement indicates that the Eu(III) complex exhibits intense red-emission and extends their excitation bands to visible region. LEDs device was successfully fabricated by precoating complex EuL3(phen) onto 460 nm blue-emitting InGaN chip. The emission of device shows that the complex can act as red phosphor in combination with 460 nm blue-emitting chips. This europium complex based on 1-(7-(tert-butyl)-9-ethyl-9H-carbazol-2-yl)-4,4,4-trifluorobutane-1,3-dione is a kind of interesting red-emitting material excited by blue light, which could avoid the damage of excitation by UV light.     

Effect of axially projected oligothiophene pendants and nitro-functionalized diimine ligands on the lowest excited state in cationic Ir(III) bis-cyclometalates

The novel terthiophene (3T) oligomer 6 and a series of cationic Ir(III) bis-cyclometalates [Ir(C^N)(2)(N^N)]PF(6) 9-12 were prepared. The synthesis, characterization, electrochemical, and photophysical properties are reported. The cyclometalating ligands (C^N) are 2-phenylpyridinato (ppy) or the 3T oligomer (3T-ppy), asymmetrically capped in the 5 and 5" positions with the ppy and mesityl groups. The diimine ligands (N^N) are 2,2'-bipyridine (bpy) or 4-NO(2)-bipyridine (4-NO(2)-bpy). Hybrid metal-organic complexes 11 and 12 bear 3T-pendants ligated through the ppy cap, 10 and 12 contain NO(2) functionalized diimines, whereas 9 contains neither. Structural characterization of 10 by single crystal X-ray diffraction confirms the presence of the NO(2) substituent and pseudo-octahedral coordination geometry about the Ir(III) ion. Cyclic voltammetry highlights the large electron withdrawing effect of the NO(2) substituent, providing an 850 mV shift toward lower potentials for the first diimine centered reduction of 10 and 12. Strong overlap of the intense π → π* absorptions of the 3T-pendants with Ir(III) charge transfer bands is evident in complexes of 11 and 12, precluding the possibility for selective excitation of either chromophore. Photoexcitation (λ(ex) = 400 nm) of the series affords strong luminescence from the 3T oligomer 6 and the unsubstituted 9, with φ(em) = 0.11. In stark contrast the NO(2) and 3T functionalized complexes 10-12 display near total quenching of luminescence. Computations of the ground and excited state electronic structure using density functional theory (DFT) and time-dependent DFT (TD-DFT) indicate that both the NO(2) and 3T substituents play an important role in excited state deactivation of complexes 10-12. A substantial electronic contribution of the NO(2) substituent results in stabilization of the diimine based molecular orbital (MO) and offers an efficient nonradiative decay pathway for the excited state. Spin-orbit coupling effects of the Ir(III) ion lead to efficient population of the low lying, nonluminescent, triplet states centered on the 3T-pendants.     

Molecular organization of a water-insoluble iridium(III) complex in mixed monolayers

In this work, organized mixed monolayers containing a cationic water-insoluble iridium(III) complex, Ir-dye, [Ir(ppy)(2)(tmphen)]PF(6), (tmphen = 3,4,7,8-tetramethyl-1,10-phenanthroline, and ppy = 2-phenylpyridine), and an anionic lipid matrix, DMPA, dimyristoyl-phosphatidic acid, with different molar proportions, were formed by the co-spreading method at the air-water interface. The presence of the dye at the interface, as well as the molecular organization of the mixed films, is deduced from surface techniques such as pi-A isotherms, Brewster angle microscopy (BAM) and reflection spectroscopy. The results obtained remark the formation of an equimolar mixed film, Ir-dye/DMPA = 1:1. BAM images reveal a whole homogeneous monolayer, with gradually increasing reflectivity along the compression process up to reaching the collapse of this equimolecular monolayer at pi approximately equal to 37 mNm(-1). Increasing the molar ratio of DMPA in the mixture, the excess of lipid molecules organizes themselves forming dark flower-like domains of pure DMPA at high surface pressures, coexisting with the mixed Ir-dye/DMPA = 1:1 monolayer. On the other hand, unstable mixed monolayers are obtained by using an initial dye surface concentration higher than the equimolecular one. These mixed Langmuir monolayers have been successfully transferred onto solid substrates by the LB (Langmuir-Blodgett) technique.     

Luminescent cyclometalated Rh(III), Ir(III), and (DIP)2Ru(II) complexes with carboxylated bipyridyl ligands: synthesis, X-ray molecular structure, and photophysical properties

Luminescent cyclometalated rhodium(III) and iridium(III) complexes of the general formula [M(ppy) 2(N (wedge)N)][PF 6], with N (wedge)N = Hcmbpy = 4-carboxy-4'-methyl-2,2'-bipyridine and M = Rh ( 1), Ir ( 2) and N (wedge)N = H 2dcbpy = 4,4'-dicarboxy-2,2'-bipyridine and M = Rh ( 3), Ir ( 4), were prepared in high yields and fully characterized. The X-ray molecular structure of the monocarboxylic iridium complex [Ir(ppy) 2(Hcmbpy)][PF 6] ( 2) was also determined. The photophysical properties of these compounds were studied and showed that the photoluminescence of rhodium complexes 1 and 3 and iridium complexes 2 and 4 originates from intraligand charge-transfer (ILCT) and metal-to-ligand charge-transfer/ligand-centered MLCT/LC excited states, respectively. For comparison purposes, the mono- and dicarboxylic acid ruthenium complexes [Ru(DIP) 2(Hcmbpy)][Cl] 2 ( 5) and [Ru(DIP) 2(H 2dcbpy)][Cl] 2 ( 6), where DIP = 4,7-diphenyl-1,10-phenanthroline, were also prepared, whose emission is MLCT in nature. Comparison of the photophysical behavior of these rhodium(III), iridium(III), and ruthenium(II) complexes reveals the influence of the carboxylic groups that affect in different ways the ILCT, MLCT, and LC states.