Excess Enthalpies of Binary Mixtures of Formamide with Secondary Amides

The excess molar enthalpies H^E of binary mixtures of formamide with N-methylformamide, N-ethylformamide, N-methylacetamide, N-ethylacetamide and N-methylpropion-amide have been measured as functions of the mole fraction at 308.15 K, using an isoperibol rotating calorimeter. The experimental values of H^E are negative for all mixtures over the whole composition range. Intermolecular interactions in these mixtures are discussed through comparison of the results with those for corresponding binary mixtures of water. This revised version was published online in August 2006 with corrections to the Cover Date.     

Volumetric, Ultrasonic and Transport Properties of Binary Liquid Mixtures Containing Dimethyl Formamide at 303.15 K

Excess volumes （v^E）, ultrasonic velocities （u）, isentropic compressibility （△Ks） and viscosities （η） for the binary mixtures of dimethyl formamide （DMF） with 1,2-dichlorobenzene, 1,3-dichlorobenzene, 1,2,4-trichlorobenzene, o-chlorotoluene, m-chlorotoluene, p-chlorotoluene, o-nitrotoluene and m-nitrotoluene at 303.15 K were studied. Excess volume data exhibit an inversion in sign for the mixtures of dimethyl formamide with 1,2- and 1,3-dichlorobenzenes and the property is completely positive over the entire composition range for the mixtures of dimethyl formamide with 1,2,4-trichlorobenzene, o-nitrotoluene and m-nitrotoluene. On the other hand, the quantity is negative for the mixtures of dimethyl formamide with chlorotoluenes. Isentropic compressibility （Ks） has been computed for the same systems from precise sound velocity and density data. Further, deviation of isentropic com- pressibility （△Ks） from ideal behavior was also calculated. AKs values are negative over the entire volume fraction range in all the binary mixtures. The experimental sound velocity data were analysed in terms of Free Length Theory （FLT） and Collision Factor Theory （CFT）. The viscosity data were analysed on the basis of corresponding state approach. The measured data were discussed on the basis of intermolecular interactions between unlike molecules.     

Surface Tension, Heat Capacity, and Volume of Amphiphilic Compounds in Formamide Solutions

Density measurements of sodium dodecyl sulfate (SDS), sodium decyl sulfate (SDeS), sodium octyl sulfate(SOS), and sodium hexyl sulfate(SHS) in formamide (FA) as functions of the surfactant concentrations were carried out at 25°C. For SDS in FA, additional density measurements at 35 and 60°C and surface tension and specific heat capacity measurements at 25°C were also performed. From density and specific heat capacity data, the apparent molar volume and heat capacity of the surfactants as functions of concentration were calculated. The surface excess of SDS at the solution–air interface was also determined from the surface tension measurements using the Gibbs adsorption equation. Under our experimental conditions, none of the experimental results evidence micelle formation. In addition, volumetric studies of the hexanol–SDS–FA ternary system at 25°C evidence only interactions between the dispersed surfactant and alcohol.     

毛细管气相色谱法测定腈纶布料中苯、甲苯和二甲基甲酰胺残留

 建立了同时定量测定腈纶布料及其服装中的苯、甲苯和二甲基甲酰胺残留的毛细管气相色谱分析方法。测得的回收率分别为 93 .3 % ,1 0 1 .8% ,94.9% ;变异系数为 3 .4% ,2 .0 % ,2 .8%。方法简便、快速、准确。     

二元有机液体混合物热容与过剩热容的测定

溶液的热容及过剩热容是热力学的重要函数，对其测定与研究具有理论与实际意义．首先，热容是化工传热计算中的基础数据，过剩热容则可检验溶液中分子间的相互作用，并可利用其计算混合物的热容．本文报告了用法国Setaram公司生产的MS-80型Calvet微量热仪对环己酮-芳烃（苯、甲     

Integral Isobaric Heats of Vaporization of Methanol + 1,2-Dichloroethane, + 1,1,1-Trichloroethane Mixtures

Abstract

A modified form of Dana's apparatus is employed to measure the integral isobaric heats of vaporization of methanol-1,2-dichloroethane and methanol-1,1,1-trichloroethane mixtures at 720 mm Hg. The results are in good agreement with the values calculated from Gambill's equation.     

气相色谱-质谱法测定再造烟叶中甲酰胺

再造烟叶样品用甲醇提取5min,取上层清液,经有机相滤膜过滤,采用气相色谱-质谱法测定滤液中甲酰胺的含量。在气相色谱分离中采用DB-Wax毛细管色谱柱(0.32mm×30m,0.25μm),在质谱分析中采用选择离子监测模式。甲酰胺的质量浓度在0.1~5.0mg·L^-1内与其对应的峰面积呈线性关系,检出限(3S/N)为0.01mg·L^-1。加标回收率为92.5%~105%,测定值的日内相对标准偏差(n=6)为2.5%~3.0%,日间相对标准偏差(n=3)为4.4%。     

右旋布洛芬的低温热容

在80～370 K温度范围内, 用精密自动绝热量热计准确测量了右旋布洛芬的摩尔热容.其固态右旋布洛芬测量值对折和温度X[X=f(T)]的拟和方程为:Cp,m(S)=－39.483X4－66.649X3＋95.196X2＋210.84X＋172.98;相应的液态的拟和方程为 :Cp,m(L)=7.191X3＋4.2774X2＋56.365X＋498.5.并计算得到右旋布洛芬相对于室温(298.15 K)的摩尔焓和摩尔熵.右旋布洛芬的熔点为(324.15±0.02) K.基于摩尔热容的测量,还可获得右旋布洛芬的纯度为99.44％.并对右旋布洛芬和消旋布洛芬的热容进行了对比研究.     

纳米铁的低温热容和热力学性质研究

用扫描电子显微镜(SEM)测定了纳米铁试样的粒径, SEM结果表明Fe试样平均粒径d为25 nm. 在84～350 K温区, 用精密低温绝热量热计测定了该纳米铁试样的等压摩尔热容, 拟合出其等压摩尔热容与热力学温度的函数关系式: Cp=36.831+14.772x−5.4968x2−0.7099x3−1.3188x4, 其中x=(T−234)/156. 根据热容与热力学函数关系, 计算了以298.15 K为基准的纳米Fe(d=25 nm)热力学函数, 并与文献报导的粗晶Fe及粒径87 nm Fe的热容进行了比较, 从能量角度分析了不同粒径Fe热容曲线差别产生的原因.     

三聚氰胺的生成焓、热容和熵

通过多种热化学方法研究了三聚氰胺的热力学性质. 首先用氧弹式燃烧热量计测定了三聚氰胺在298.15 K 时的燃烧热, 根据燃烧热结果, 计算出三聚氰胺的标准摩尔燃烧焓和标准摩尔生成焓, 分别为: △cHΘm=(-2455.17±4.65) kJ·mol-1; △fHΘm =(-763.38±5.16) kJ·mol-1. 然后根据键焓与燃烧焓之间的关系, 估算出三聚氰胺中的C≈N(此键介于单键与双键之间)键能为458.30 kJ·mol-1, 此值介于碳氮单键键能和双键键能之间. 通过绝热热量计测定了三聚氰胺从80到385 K的低温热容. 根据热容值, 计算了此温度区间的标准摩尔生成焓, 其与温度呈线性关系. 另外, 三聚氰胺的热稳定性也用热重-差示扫描量热(TG-DSC)法进行了分析, 确定其分解的DSC曲线的峰顶温度为603.37 K.     

液态水热容的量子校正

在不同温度下对液态水进行分子动力学模拟，研究各温度下液态水中各个原子的速度自相关函数密度谱，以考察液态水热容的量子校正随温度的变化规律．研究结果表明，水分子的三个内部振动模式对热容的量子校正不随温度变化，而转动和分子距平衡位置的摆动运动模式的量子校正随温度升高而逐步减小．对于分子动力学模拟结果经温度涨落计算所得的热容进行了量子校正，校正结果与实验值能符合．     

Heat Capacity and GrAuneisen Parameter for GaN with Zinc-Blende Structure

A shell model molecular dynamics method is used to investigate the behavior of the pressure-volume relationship, heat capacities at constant pressure and constant volume, Gr?uneisen parameter for GaN with zinc-blende cubic structure at high pressures and high temperatures. The interactions between Ga-Ga, Ga-N, and N-N are described with polarizable potential models which have assigned two different partially ionic charges to Ga and N by taking into account of the ionic character of GaN. It is shown that the calculated thermodynamic parameters at ambient condition are in good agreement with the available theoretical results. Compared with the results from first-principles calculations, the discrepancy of constant-volumeheat capacity at lower temperature may be explained well with different approximation mechanisms. The properties of GaN with zinc-blende structure are summarized in the temperature range of 300-2000 K andpressure up to 40 GPa.     

Electrochemistry of Europium in Aqueous and Aqueous Formamide Solutions

Abstract

The electrochemical behavior of the system Eu(III)/Eu(II) in aqueous formamide solutions was studied by current reversal chronopotentiometry at a mercury pool electrode, in 1 M NaClO₄ The results indicate that double layer effects must be considered rather that ion solvation effects when explaining the influence of formamide on the Eu(III)/Eu(II) electrode reaction.     

Molar Volumes and Heat Capacities of Electrolytes and Ions in Nonaqueous Solvents: 1. Formamide

Apparent molar volumes and heat capacities of 27 electrolytes have been measured as a function of concentration in formamide at 25°C using a series-connected flow densimeter and Picker calorimeter system. These data were extrapolated to infinite dilution using the appropriate Debye–Hückel limiting slopes to give the corresponding standard partial molar quantities. Ionic volumes and heat capacities at infinite dilution were obtained by an appropriate assumption based on the reference electrolyte Ph₄PBPh₄ (TPTB). The ionic volumes, but not the heat capacities, agree reasonably well with previously published statistically based predictions. The values obtained are discussed in terms of simple models of electrolyte solution behavior and a number of interesting features are noted, including, possible dependencies of ionic volumes on solvent isothermal compressibility and of ionic heat capacities on solvent electron acceptor abilities.     

Thermoanalytical Investigation of Formamide Intercalated Kaolinites Under Quasi-isothermal Conditions

The thermal behaviour of fully and partially expanded kaolinites intercalated with formamide has been investigated in nitrogen atmosphere under quasi-isothermal heating conditions at a constant, pre-set decomposition rate of 0.20 mg min^–1 . With this technique it is possible to distinguish between loosely bonded (surface bonded) and strongly bonded (intercalated) formamide. Loosely bonded formamide is liberated in an equilibrium reaction under quasi-isothermal conditions at 118°C, while the strongly bonded (intercalated) portion is lost in an equilibrium, but non-isothermal process between 130 and 200°C. The presence of water in the intercalation solution can influence the amount of adsorbed formamide, but has no effect on the amount of the intercalated reagent. When the kaolinite is fully expanded, the amount of formamide hydrogen bonded to the inner surface of the mineral is 0.25 mol formamide/mol inner surface OH group. While the amount of surface bonded formamide is decreasing with time, no change can be observed in the amount of the intercalated reagent. With this technique the mass loss stages belonging to adsorbed and intercalated formamide can be resolved thereby providing a complex containing only one type of bonded (intercalated) formamide.This revised version was published online in November 2005 with corrections to the Cover Date.     

Construction of an Isoperibol Calorimeter to Measure the Specific Heat Capacity of Foods Between 20 and 90°C

A simple isoperibol calorimeter, using the modified method of mixtures, was developed to measure the average specific heat capacity of different dough types between 20 and 90°C. The method consisted of encapsulating the sample in a copper cylinder and immersing the capsule in water at a different temperature. The procedure was tested for reliability with distilled water and whole fat milk before applying it to five dough types of varying moisture and fat contents. Mean values of 4.176±0.008 kJ kg^-1 K^-1 and 3.942±0.034 kJ kg^-1 K^-1 were obtained for distilled water and milk respectively, which agree within 0.23 and 0.34% from reported values. The specific heat values for the five dough types were found to range between 2.15–2.68 kJ kg^-1 K^-1 between 2.35–3.10 kJ kg^-1 K^-1 and between 2.40–3.19 kJ kg^-1 K^-1 at the three temperature levels studied. The specific heat capacity was found to depend not only on the moisture level but also on the fat content, especially for dough types with a high percent of fat. Regression analysis was then used to correlate these values and develop a set of empirical equations. The results were used to assist in energy balance calculations in backing oven for industrial purposes. This revised version was published online in July 2006 with corrections to the Cover Date.     

Structural Evolution of a Formamide Modified Sol—Spectroscopic Study

We investigated the influence of formamide on the acid-catalyzed sol-gel process at 40°C, by Fourier transformed infrared spectroscopy. Two silica sols were studied: one containing formamide and one without. Following the time evolution of both the Si−O(H) stretching vibration at around 950 cm⁻¹ and the Si−O(−Si) vibration between 1080 and 1200 cm⁻¹, we were able to describe the structural evolution of each sol. We thus observed, in the case of the formamide containing sol, a peculiar two-step structural evolution which eventually resulted in a highly interconnected gel.     

微粉型四钼酸铵热容的测定

Single phase of ammonium tetramolybdate in the micro power form was prepared from polyphase ammonium paramolybdate. Its heat capacity from 14.25℃ to 120.12 ℃ was measured by drop method and the result is
Cp=0.3936+7.4047×10-4T+6.3543×10-3T-2(J•K-1•g-1)     

Excess Isentropic Compressibilities for 1,3-Dioxolane or 1,4-Dioxane <Emphasis Type="Italic">+</Emphasis> Water <Emphasis Type="Italic">+</Emphasis> Formamide or N,N-Dimethylformamide Ternary Mixtures at 308.15 K

Speeds of sound, u_ijk, of 1,3-dioxolane or 1,4-dioxane (i) + water (j) + formamide or dimethylformamide (k) ternary mixtures and of their binary subsystems, u_ij, of 1,3-dioxolane or 1,4-dioxane (i) + formamide or dimethylformamide (j), and water (i) + formamide or dimethylformamide (j) have been measured over the entire composition range at 308.15 K. The experimental data have been used to evaluate the excess isentropic compressibilities of binary (κ_s^E)_ij and ternary (κ_s^E)_ijk mixtures using their densities calculated from molar excess volume data. The Moelwyn-Huggins concept [M. L. Huggins, Polymer 12, 389 (1971)] of interaction between the surfaces of components of a binary mixture has been employed to evaluate the excess isentropic compressibilities (using the concept of connectivity parameter of third degree of a molecule, ³ξ, which in turn depends on its topology) of binary mixtures, and this method has been extended to predict excess compressibilities of ternary mixtures. Values of (κ_s^E)_ij and (κ_s^E)_ijk have also been calculated by the Flory theory. It was observed that (κ_s^E)_ij and (κ_s^E)_ijk predicted by the Moelwyn-Huggins approach compare well with calculated and experimental values.     

Formamide as an Ammonia Synthon in Amination of Acid Chlorides

The use of formamide as a convenient source of ammonia has been explored for the direct transformation of acid chlorides to primary amides. Various aliphatic, alicyclic aromatic, and heterocyclic acid chlorides are converted to the corresponding carboxamides in good yields (75–94%).