Volumetric behaviour of binary liquid mixtures of dimethylsulphoxide with substituted benzenes at 303.15 k

Excess molar volumes (V ^E ) for binary mixtures of dimethyl sulphoxide (DMSO) with substituted benzenes have been measured at 303.15?K. The substituted benzenes include toluene, ethylbenzene, chlorobenzene, bromobenzene and nitrobenzene. The measured V ^E data is positive for the mixtures of DMSO with nitrobenzene and is completely negative over the entire composition range in the mixtures of toluene, ethylbenzene and chlorobenzene and an inversion in sign is observed in the bromobenzene system. The experimental results are analysed in terms of intermolecular interactions and effect of substitutents on benzene ring between unlike molecules.     

Excess molar volumes and viscosities of binary mixtures of 1,2-diethoxyethane with chloroalkanes at 298.15 K

Excess molar volumes (V _m ^E ) and viscosities (η) of the binary mixtures of 1,2-diethoxyethane with di-, tri- and tetrachloromethane have been measured at 298-15 K and atmospheric pressure over the entire mole fraction range. The deviations in viscosities (δlnη) and excess energies of activation (δG*^E) for viscous flow have been calculated from the experimental data. The Prigogine-Flory-Patterson (PFP) model has been used to calculateV _m ^E , and the results have been compared with experimental data. The Bloomfield and Dewan model has been used to calculate viscosity coefficients and these have also been compared with experimental data for the three mixtures. The results have been discussed in terms of dipole-dipole interactions between 1,2-diethoxyethane and chloroalkanes and their magnitudes decreasing with the dipole character of the molecules. A short comparative study with results for mixtures with polyethers and chloroalkanes is also described.     

Excess volumes and excess viscosities of binary mixtures of cyclic ethers with bromobenzene

From density and viscosity measurements at 25 and 40°C, excess volumes and excess viscosities of the binary mixtures of a cyclic ether with bromobenzene were determined. The results are correlated by means of a Redlich-Kister type equation and interpreted in terms of molecular interactions.     

Excess volumes, densities, speeds of sound and viscosities for the binary systems of diisopropyl ether with hydrocarbons at 303.15 K

Experimental results of excess volumes, speeds of sound and viscosities at 303.15 K are presented for the binary systems of diisopropyl ether with hexane, heptane, octane, isooctane, benzene, cyclohexane, tetralin and decalin over the entire range of composition. Isentropic compressibilities are calculated from speed of sound and density data. Speeds of sound are evaluated on the basis of Jacobson free length theory and Schaaffs collision factor theory. Further, the viscosity data was analysed on the basis of corresponding states approach and Grunberg and Nissan treatment. The experimental results are discussed in terms of molecular interactions between unlike molecules.     

Excess molar volumes of methyl tert-butyl ether with chloroalkanes at 30°C

Excess molar volumes are reported for binary mixtures of methyl tert-butyl ether with trichloromethane, tetrachloromethane, 1,2-dichloroethane, 1,1,2-trichloroethane, 1,1,2,2-tetrachloroethane, or 1,1,1,2,2-pentachloroethane at 30°C over the entire composition range of the mixtures. Excess volumes for all the mixtures are found to be negative. A qualitative interpretation of the results in terms of O–H–C and Cl–O interactions is presented. The Prigogine-Flory-Patterson theory has been used to analyze the results.     

Excess volumes of ternary mixtures of N,N-dimethylformamide-diethyl ketone-1-alkanols at 303.15K

Volume changes on mixing of ternary liquid mixtures of N,N-dimethylformamide and diethyl ketone with 1-alkanols have been measured as a function of composition at 303.15 K. The alkanols include 1-propanol, 1-butanol, 1-pentanol and 1-hexanol. The measured V^E values are negative in the mixtures of N,N-dimethylformamide, diethyl ketone and 1-propanol, or 1-butanol. The V^E data exhibits an inversion in sign in the mixture containing 1-pentanol and positive excess volumes are observed in the mixture containing 1-hexanol. The measured data are compared with predicted values based upon empirical relations. The excess volume for the binary mixture of N,N-dimethylformamide with diethyl ketone has been measured over the entire range of composition at 303.15 K. The V^E values are negative for the binary mixture.     

Determination of the excess molar and partial molar volumes of the constituents in the binary mixtures with tri-ethylamine

The excess molar volume and excess partial molar volumes of binary mixtures of tri-ethylamine with toluene (Tn), ethylbenzene (Ebz) and n-propylbenzene (n-PBz) have been calculated using the MS-Excel method. The excess molar volumes have been found to be negative throughout the entire range of composition. The temperature effects are found to be insignificant, so the mixtures may be termed regular mixtures of Hildebrand.     

Excess molar enthalpies at 298.15 k of the binary mixtures

We have determined the excess molar enthalpies H _m ^E at 298.15 K and normal atmospheric pressure for the binary mixtures containing tert-butyl methyl ether (MTBE)+(methanol, ethanol, 1-propanol, 1-pentanol) using a Calvet microcalorimeter. This revised version was published online in July 2006 with corrections to the Cover Date.     

Densities, viscosities, excess molar volumes, and refractive indices of acetonitrile and 2-alkanols binary mixtures at different temperatures: Experimental results and application of the Prigogine–Flory–Patterson theory

Densities, viscosities, and refractive indices of mixing of acetonitrile with 2-propanol, 2-butanol, 2-pentanol, 2-hexanol and 2-heptanol, have been measured as a function of composition at 293.15, 298.15, 303.15 and 308.15 K and ambient pressure. The excess molar volumes, viscosity and refractive index deviations calculated and fitted to Redlich–Kister polynomials. From the experimental data, partial molar volumes, and partial molar volumes at infinite dilution, were also calculated. The latter values are interesting from a theoretical point of view since at infinite dilution the only interactions present are solute solvent interactions. For mixtures of acetonitrile with used 2-alkanols, over the entire range of mole fractions, Δη is negative and both, and Δn_D are positive. The effect of temperature and chain-length of the 2-alkanols on the excess molar volumes, viscosity and refractive index deviations of its mixtures with acetonitrile are discussed in terms of molecular interaction between unlike molecules. The experimental results have been used to test the applicability of the Prigogine–Flory–Patterson (PFP) theory.     

Excess molar volumes of binary mixtures of 4-methyl-2-pentanone and some hydrocarbons

Summary Excess molar volumes (V ^E) for binary mixtures of 4-methyl-2-pentanone and some hydrocarbons (cyclohexane, benzene, toluene, andp-xylene) over the whole mole fraction range are determined by density measurement at 293.15 K. The variation of theV ^E values with the composition for all binary systems is symmetrical except for benezene where the dependence is sigmoid. TheV ^E values are positive for the binary mixture of the ketone with cyclohexane. For the other hydrocarbons, theV ^E values are progressively negative over the entire mole fraction range except the system containing benzene, where a few values at higher mole fractions of benzene are positive. The results are discussed in terms of molecular interactions steric effects.

---

Molare Zusatzvolumina von binären Mischungen von 4-Methyl-2-pentanon und einigen Kohlenwasserstoffen

Zusammenfassung Molare Zusatzvolumina (V ^E) von binären Mischungen von 4-Methyl-2-pentanon und einigen Kohlenwasserstoffen (Cyclohexan, Benzol, Toluol undp-Xylol) wurden bei 293.15 K durch Dichtemessungen über den gesamten Molenbruchbereich bestimmt. Mit Ausnahme der binären Mischung mit Benzol (sigmoide Kurvenform) ist die Änderung vonV ^E in Abhängigkeit von der Zusammensetzung der Mischungen symmetrisch. Für das System Keton/Cyclohexan sind dieV ^E-Werte stark positiv, während sie für die anderen Gemische negativ sind. Eine Ausnahme bildet wieder das System mit Benzol als Kohlenwasserstoff, wo einige Werte bei höheren Molenbrüchen von Benzol positiv sind. Die Ergebnisse werden im Zusammenhang mit intermolekularen Wechselwirkungen und dem Einfluß sterischer Faktoren diskutiert.

     

Variation of excess volumes with temperature for binary mixtures ofp-xylene withn-hexane andn-hexadecane

The variation of the molar volume with temperature from 25 to 50 °C of binary mixtures of p-xylene + n-hexane and p-xylene + n-hexadecane has been measured by a dilatometric method over the complete mole fraction range. From the experimental results we have calculated v^E/T)_p. Literature values of v^E at 25°C together with the integration of v^E/T)_p yield v^E as a function of temperature. The excess volumes of p-xylene + n-hexane at 40 °C and p-xylene + n-hexadecane at 40 and 45 °C have also been measured by a dilatometric method, and the results were compared to those obtained from the integration of . The results from both methods are in excellent agreement within experimental error.The experimental values of are negative for the system p-xylene + n-hexane and positive for p-xylene + n-hexadecane. We have interpreted our experimental results in terms of the order present in p-xylene and n-alkanes.     

Densities,excess molar volumes,and partial molar volumes for binary mixtures of water with monoethanolamine,diethanolamine, and triethanolamine from 25 to 80°C

We have measured densities of binary mixtures of water with monoethanolamine (MEA), diethanolamine (DEA), and triethanolamine (TEA) over the full range of compositions and over the temperature range from 25 to 80°C. Results of these measurements have been used in calculating excess molar volumes and partial molar volumes. Knowledge of the volumetric properties of these mixtures is useful in connection with industrial treatment of acidic gases; derived excess molar volumes and partial molar volumes can be used as a basis for understanding some of the molecular interactions in water-organic mixtures.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Volumetric and Ultrasonic Behaviour of 1-Heptanol with Some Chloroethanes and Chloroethenes at 303.15 K

Abstract

Excess volumes (V^E ) and deviations in isentropic compressibilities (K_s ) were reported over the entire mole fraction range for mixtures of 1-heptanol with 1,2-dichloroethane, 1,1,1-trichloroethane, 1,1,2,2-tetrachloroethane, trichloroethene and tetrachloroethene, at 303.15 K. The values of V^E and K_s are positive for the systems, 1-heptanol + 1,2-dichloroethane, +1,1,1-trichloroethane, + trichloroethene and + tetrachloroethene. Inversion in sign of V^E and K_s from positive to negative is observed in mixtures of 1-heptanol with 1,1,2,2-tetrachloroethane. The experimental data were used to explain the effect of successive chlorination and unsaturation of ethane molecule on V^E and K_s .     

Mixtures of 1-1 electrolytes: Densities and excess volumes of aqueous NaCl-NaBr solutions at 25°C

The relative densities and excess volumes of mixing are reported for the system consisting of aqueous NaCl and NaBr at 25°C at constant ionic strengths of 0.5, 1, 2, 3, and 4 mol kg^–1 of water. The measurements of densities are precise to 3 · 10^–6 g cm^–3. The densities, apparent molal volumes and excess volumes are analysed with the virial coefficients approach with excellent accuracy. The excess volumes are positive throughout.

---

Mischung von 1 : 1-Elektrolyten: Dichten und Excess-Volumina von wäßrigen NaCl-NaBr-Lösungen bei 25°C

Zusammenfassung Die relativen Dichten und Excess-Volumina der Mischung werden für das System wäßriges NaCl-NaBr bei 25°C und einer konstanten Ionenstärke von 0.5, 1, 2, 3 und 4 mol kg^–1 Wasser berichtet. Die Dichtemessungen haben eine Genauigkeit von 3 · 10^–6 g cm^–3. Die Dichten, die effektiven molalen Volumina und die Excess-Volumina werden von der Virialkoeffizienten-Methode ausgezeichnet wiedergegeben. Die Excess-Volumina sind durchwegs positiv.

     

Excess molar volumes and excess molar enthalpies of binary mixtures for 1,2-dichloropropane + 2-alkoxyethanol acetates at 298.15 K

The excess molar volumes and excess molar enthalpies over the whole range of composition have been measured for the binary mixtures formed by 1,2-dichloropropane (1,2-DCP) with three 2-alkoxyethanol acetates at 298.15 K and atmospheric pressure using a digital vibrating-tube densimeter and an isothermal calorimeter with flow-mixing cell, respectively. The 2-alkoxyethanol acetates are ethylene glycol monomethyl ether acetate (EGMEA), ethylene glycol monoethyl ether acetate (EGEEA), and ethylene glycol monobutyl ether acetate (EGBEA). The of the mixture has been shown positive for EGMEA, ‘S-shaped’ for EGEEA, being negative at low and positive at high mole fraction of 1,2-DCP, and negative for EGBEA. All the values for the above mixtures showed an exothermic effect (negative values) which increase with increase in carbon number of the 2-alkoxyethanol acetates, showing minimum values varying from −374 J mol⁻¹ (EGMEA) to −428 J mol⁻¹ (EGBEA) around 0.54–0.56 mol fraction of 1,2-DCP. The experimental results of and were fitted to Redlich–Kister equation to correlate the composition dependence of both excess properties. In this work, the experimental excess enthalpy data have been also correlated using thermodynamic models (Wilson, NRTL, and UNIQUAC) and have been qualitatively discussed.     

Isothermal vapor–liquid equilibrium at 303.15 K and excess molar volumes at 298.15 K for the ternary system of propyl vinyl ether + 1-propanol + 2,2,4-trimethyl-pentane and its binary sub-systems

Isothermal vapor–liquid equilibrium data determined by the static method at 303.15 K are reported for the binary systems propyl vinyl ether + 1-propanol, 1-propanol + 2,2,4-trimethylpentane and propyl vinyl ether + 2,2,4-trimethylpentane and also for the ternary system propyl vinyl ether + 1-propanol + 2,2,4-trimethyl-pentane. Additionally, new excess volume data are reported for the same systems at 298.15 K. The experimental binary and ternary vapor–liquid equilibrium data were correlated with different G^E models and excess molar volume data were correlated with the Redlich–Kister equation for the binary systems and the Cibulka equation for the ternary system, respectively.