Kinetics of reactions between bromoplatinum(II) complexes and silver nitrate

The kinetics of the reactions of bromide complexes [[PtenBr₂], [Pt(NH₃)₂Br₂], and [enPtBr₂Pten](NO₃)₂ with AgNO₃ are studied potentiometrically. The reactions occur in two stages with dramatically different rates. Rate constants are determined for the second stage. The kinetics of the reaction between the dimeric complex and AgNO₃ are studied at 5, 15, 25, and 35°C. The activation energy is determined.     

Synthesis and Characterization of Na And Mg Containing Carbonatefluorapatites

Abstract

The apatites were precipitated in an aqueous NH₄OH-NH₄NO₃ solution with pH 9–10 at temperatures 20°C and 80°C. The synthesized materials were studied by chemical and thermal analyses (TG/DTG/DTA, TG/ETIR-EGA), IR-spectroscopy, XRD-powder analysis and specific area measurements.     

Elucidation of the Reaction Products of Acetonitrile with Phosphorus Pentachloride

Abstract

The reaction of acetonitrile with PCl, results in the ionic compounds (1) to (4) containing the trichloro[2-chloro-2-[(trichlorophosphoranyli-dene)amino]ethenyl]phosphorus cations and not in the compounds [CH2?C?NPCl₃]PCl₆1 or trichloro[2-chloro-1 -[(trichlorophosphoranyli-dene)amino] ethenyl]phosphorus hexachlorophosphate (5) as assumed from ³¹P-NMR spectra [2, 3]. The crystal structures of the compounds (1) to (4) were determined with X-rays at 95K. As observed for the CI-C(NPCl₃); cation all the cations show cis-trans conformations with respect to their CI-C-X-P torsion angles. The wcl3 groups of the cations have two different orientations with one C?N?P?CI torsion angle of about 0° (cis) as in (1) or about 180° (trans) as in (3) and (4). In the salt (2) there are two formula units in the asymmetric unit with one cation showing the cis and the other showing the tram conformation.     

(NH4)3[M2NCl10] (M = Nb,Ta): Synthese,Kristallstruktur und Phasenumwandlung

(NH₄)₃[M₂NCl₁₀] (M = Nb, Ta): Synthesis, Crystal Structure, and Phase Transition The nitrido complexes (NH₄)₃[Nb₂NCl₁₀], and (NH₄)₃[Ta₂NCl₁₀] are obtained in form of moisture-sensitive, tetragonal crystals by the reaction of the corresponding pentachlorides with NH₄Cl at 400 °C in sealed glass ampoules. Both compounds crystallize isotypically in two modifications, a low temperature form with the space group P4/mnc and a high temperature form with space group I4/mmm. In case of (NH₄)₃[Ta₂NCl₁₀] a continuous phase transition occurs between –70 °C and +60 °C. For the niobium compound this phase transition is not yet fully completed at 90 °C. The structure of (NH₄)₃[Nb₂NCl₁₀] was determined at several temperatures between –65 °C und +90 °C to carefully follow the continuous phase transition. For (NH₄)₃[Ta₂NCl₁₀] the structure of the low temperature form was determined at –70 °C, and of the high temperature form at +60 °C. The closely related crystal structures of the two modifications contain NH₄⁺ cations and [M₂NCl₁₀]^3– anions. The anions with the symmetry D_4h are characterized by a symmetrical nitrido bridge M=N=M with distances Nb–N = 184.5(1) pm at –65 °C or 183.8(2) pm at 90 °C, and Ta–N = 184.86(5) pm at –70 °C or 184.57(5) pm at 60 °C.     

Leaching Behaviour and Solid Phase Fractionation of Selected Metals as Affected by Thermal Treatment of a Polluted Sediment

Abstract

A contaminated dredged sediment was subjected to a thermal treatment at temperatures ranging from 120 to 450°C. The leaching behaviour of selected metals (Cd, Cu, Pb, Zn, Fe, Mn) was studied using NH₄OAc-EDTA extraction. In addition, solid phase fractionation was carried out by means of a sequential extraction procedure.

The NH₄OAc-EDTA extraction showed a sharp increase in metal leachability from sediments treated at intermediate temperatures (120–350°C). The metal fractionation of the solid phases at the different temperatures did not reveal relevant shifts except for Cu. The decrease of the oxidizable Cu fraction was highly correlated (P < 0.001) with the disappearance of organic matter at higher treatment temperatures. It is suggested that binding energy changes within the fractions rather than shifts between chemical forms account for the observed leaching behaviour.     

Structure and morphology of nanocomposite films prepared from polyvinyl alcohol and silver nitrate: Influence of thermal treatment

Hybrid organic/inorganic films have been prepared from an aqueous solution of polyvinyl alcohol (PVA) and silver nitrate (AgNO₃). The silver nanoparticles have been generated in the PVA matrix by thermal treatments. The structure and the morphology of the hybrid films have been studied as a function of the silver precursor concentration and of the annealing conditions for a wide range of annealing temperatures. It was shown that in the uncured hybrid film most of the silver ions were initially coordinated with the polymer OH groups to form a chelate structure. A nanostructuration effect leading to the formation of crystalline silver nanoparticles was evidenced for annealing treatments performed at temperatures higher than 90 °C. For a curing temperature equal to 110 °C, the sizes of the formed nanoparticles were only slightly increasing as a function of annealing time and the effect of AgNO₃ complex amount in this curing condition was also significant, but slight. Annealing at a temperature equal to 160 °C thus at a temperature for which a part of the crystalline phase of PVA was melt led to an important increase of the size of the generated metal nanoparticles. The evolution of the morphology was discussed for each curing temperature as a function of the kinetics of the nanostructuration, of the size of the matrix amorphous lamellae and of the polymer chain mobility. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2657–2672, 2007     

Ionic liquids from the cationic cobalt(III) Schiff base complex, [Co(acacen)L2][Tf2N] (acacen = N,N′-bis(acetylacetone)ethylenediamine,Tf2N = bis(trifluoromethanesulfonyl)amide)

Ionic liquids comprising cationic cobalt(III) complexes [Co(acacen)L₂][Tf₂N] (L?=?3-butylpyridine (1), 1-butylimidazole (2); acacen?=?N,N′-bis(acetylacetone)ethylenediamine, Tf₂N?=?bis(trifluoromethanesulfonyl)amide) were prepared. 1 is a liquid at room temperature and exhibits a glass transition at ?12?°C, whereas 2 is a solid at room temperature with a melting point of 74.6?°C and glass transition temperature of ?15?°C upon cooling from the melt. These salts are reddish brown diamagnetic materials that are stable against air and water; these properties differ from those of the corresponding iron(III) salt. Desorption of the axial ligands of 1 and 2 occurs at 180 and 207?°C, respectively.     

In vacuo reduction of silver orthophosphate with graphite for high‐precision oxygen isotope analysis

The reduction of silver phosphate with graphite under vacuum conditions was studied at final reaction temperatures varying from 430 to 915°C to determine: (i) the CO₂ extraction yield, and (ii) the oxygen isotopic composition of CO₂. The CO₂ yield and oxygen isotopic composition were determined on a calibrated dual inlet and triple collector isotope ratio mass spectrometer. We observed the following three stages of the reduction process. (1) At temperatures below 590°C only CO₂ is formed, while silver orthophosphate decays to pyrophosphate. (2) At higher temperatures, 590–830°C, predominantly CO is formed from silver pyrophosphate which decays to metaphosphate; this CO was always converted into CO₂ by the glow discharge method. (3) At temperatures above 830°C the noticeable sublimation of silver orthophosphate occurs. This observation was accompanied by the oxygen isotope analysis of the obtained CO₂. The measured δ¹⁸O value varied from ?11.93‰ (at the lowest temperature) to ?20.32‰ (at the highest temperature). The optimum reduction temperature range was found to be 780–830°C. In this temperature range the oxygen isotopic composition of CO₂ is nearly constant and the reaction efficiency is relatively high. The determined difference between the δ¹⁸O value of oxygen in silver phosphate and that in CO₂ extracted from this phosphate is +0.70‰. Copyright © 2010 John Wiley & Sons, Ltd.     

The silver(I)‐catalyzed exchange of coordinated cyanide in hexacyanoferrate(II) by phenylhydrazine in aqueous medium

The [Ag]⁺‐catalyzed exchange of coordinated cyanide in [Fe(CN)₆]^4? by phenylhydrazine (PhNHNH₂) has been studied spectrophotometrically at 488 nm by monitoring increase in the absorbance for the formation of cherry red colored complex [Fe(CN)₅PhNHNH₂]^3?. The other reaction conditions were pH 2.80±,0.02, temperature = 30.0 ± 0.1^°C, and ionic strength (I) = 0.02 M (KNO₃). The reaction was followed as a function of pH, ionic strength, temperature, [Fe(CN)^4?₆], [PhNHNH₂], [Ag⁺] by varying one variable at a time. The initial rates were evaluated for each variation using the plane mirror method. The initial rates evaluated as a function of [Fe(CN)^4?₆] clearly indicate that the initial rate increases with the increase in [Fe(CN)^4?₆] and finally reaches to a limiting value when [Fe(CN)^4?₆]/[AgNO₃] ? 1000. It indicates the formation of a strong adduct between [Fe(CN)₆]^4? and AgNO₃ prior to the abstraction of CN^?. The variation in initial rates with [PhNHNH₂] also showed limiting values at [Fe(CN)^4?₆]/[PhNHNH₂] ? 8.30. The complex behavior due to pH and [Ag⁺] variations on the rate has been explained in detail. The composition of the final reaction product [Fe(CN)₅PhNHNH₂] formed during the course of reaction has been found to be 1:1 using the mole ratio method. The evaluated values of activation parameters for the catalyzed reaction are E_a = 53.85 kJ mol^?1, Δ H^≠, = 51.33 kJ mol^?1, and Δ S^≠ = ?134.63 J K^?1 mol^?1, which suggest an interchange dissociative mechanism. A most plausible mechanistic scheme has been proposed based on the experimental observations. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 447–456, 2007     

Electrolytic nucleation and growth of silver crystals in silver nitrate melts containing oxidants

Silver crystal nucleation is studied in AgNO₃ melts containing Pb(NO₃)₂ and HNO₃ at 250°C by the galvanostatic method. The maximum nucleation overpotential is higher as compared with pure AgNO₃ and the exchange current of silver deposition-dissolution is lower. It is found that the added substances and the products of their reactions with the melt are strong oxidants, take part in the electrochemical processes, and induce passivation of the cathodic substrate and the surface of growing silver crystals. Substantial changes in the morphology of the cathodic deposit and certain changes in the silver lattice parameter were observed depending on the oxidant content.     

[M(NH3)5Cl]WO4 (M = Cr, Rh): Synthesis, crystal structure, thermal properties

By single crystal X-ray diffraction the crystal structure of a series of [M(NH₃)₅Cl]WO₄ (M = Cr, Rh) complex salts is determined. The features of thermal expansion of the single crystal of [Cr(NH₃)₅Cl]WO₄ are studied by low- and high-temperature X-ray diffractometry in the temperature range from ?173°C to +127°C. It is shown that with an increase in the temperature, W-O distances and ∠O-W-O bond angles equalize and the average W-O distances decrease by 0.012 Å. The thermal properties of the salts in different gaseous atmospheres are examined and the phase composition of the obtained products is studied.     

Properties of cadmium sulphide thin films deposited from a chemical solution

Cadmium sulphide thin films have been deposited chemically at different temperatures from 50 °C to 100 °C. The composition of the solution was [CdCl₂] = 0.01 M, [Thiourea] = 0.17 M, [NH₄Cl] = 0.036 M and [NH₃] = 0.36 M. Structural, electrical and optical properties were investigated as a function of deposition parameters. The films showed strongly oriented structures and were highly transmitting in the infrared region. Their absorption coefficient was in the range 10⁴ to 10⁵ cm⁻¹ in the visible region. The direct forbidden band had an energy gap of 2.48 eV and the refractive index for high wavelengths was equal to 2.116. The dark resistivities of as-deposited films thicker than 0.5 μm had values from 10³ to 10⁵ Ωcm. These resistivities decreased to about 10 Ωcm after annealing in vaccum or in argon atmosphere at 200 °C for one hour.     

A New Route for the Synthesis of Alkali Polyphosphate from Economical Starting Materials: Preparation and Characterization of Sodium Cyclotriphosphate

Abstract

Thermal synthesis of sodium cyclotriphosphate (SCTP) – Na₃P₃O₉ was investigated in the temperature range of 150 °C to 750 °C using sodium chloride (NaCl) and 85 wt% orthophosphoric acid (H₃PO₄) as economical starting materials. Reaction temperature had a crucial impact on the chloride elimination rate and the formation of SCTP. The best result was obtained at 600 °C with 96% of elimination of the initial chloride as hydrochloric acid and 84% of selectivity in SCTP. At lower temperatures, residual chloride contents were high. At higher temperatures (650 °C and 750 °C), SCTP was melted and transformed into glassy products.     

FT-IR spectra of NaCl�CH2O in the region from near to beyond the critical state

Water and NaCl?CH₂O solutions and their molecular spectra at high temperatures and pressures were observed and examined using a new design of hydrothermal diamond anvil cell (HDAC) connected to both a light and an infrared microscope. We have modified the diamond window of the HDAC to have a wide angle to allow the infrared beam to pass the window. Fourier-transform infrared (FT-IR) spectra of NaCl?CH₂O?CD₂O were examined at high temperatures and pressures up to 850 °C and 3 GPa. The effect of increasing temperature on water spectra differed from that of increasing pressure. The O?CH stretching frequency of water molecules increases with increasing temperature (from 20 to 600 °C), and also with increasing salinity of the solution.     

Hydrothermal synthesis,crystal structures,and blue photoluminescence of two 2-D Ag–1,2,4-triazolate coordination polymers with 4462 topology

Two 2-D metal-organic coordination polymers, {[Ag(NH₂–BPT)] · NO₃} _n (1) and {[Ag(BPT)] · H₂O} _n (2), have been synthesized via self-assembly of AgNO₃ and 4-amino-3,5-bis(3-pyridyl)-1,2,4-triazole (NH₂–BPT) under hydrothermal conditions by controlling the reaction temperatures. Lower reaction temperature (140°C) led to formation of 1, which crystallizes in the monoclinic system, space group C2/c, a = 24.001(3), b = 15.844(2), and c = 12.981(3) Å, V = 2996.8(6) ų, Z = 8. When the temperature was increased to 180°C, in situ deaminization of the organic ligand led to crystallization of 2 (space group P₂1 /n, a = 7.3106(10), b = 19.633(2), and c = 9.0596(16) Å, V = 1190.2(3) ų, Z = 4). The NH₂–BPT in 1 and BPT in 2 are μ₄ tetradentate utilizing two triazolyl and two pyridyl nitrogens, generating an unusual 2-D layer, in which binuclear Ag(I) motifs and organic ligands are four-connecting nodes that inter-link in 4⁴6² topology. Adjacent 2-D metal-organic layers are linked by a system of hydrogen bonds to form 3-D supramolecular frameworks. Strong blue fluorescence emissions are observed for 1 and 2 in the solid state at ambient temperature.     

Solubility studies in formamide: II. Solubility product of silver iodate and standard electrode potential of silver—silver iodate electrode in formamide

The solubility and solubility product of silver iodate in formamide in sodium perchlorate solutions have been determined at 25, 30 and 35°C. The solubilities in pure formamide are found to be 2.169 × 10^?4, 2.488 × 10^?4, and 2.943 × 10^?4 mole I^?1, respectively, at these temperatures, and the corresponding solubility products are 4.609 × 10^?8, 6.053 × 10^?8, and 8.448 × 10^?8 mole² 1^?2. The standard potential of the Ag_(s)/AgIO_3(s)/IO₃^? electrode has been calculated and found to be 0.2562 V at 25°C. The mean activity coefficients of silver iodate at various rounded molarities of sodium perchlorate solutions, and the standard thermodynamic quantities for the process AgIO_3(s)åAg⁺ (solvated) + IO₃^? (solvated) have been calculated at these three temperatures.     

Discotic derivatives of 6-oxoverdazyl radical

Substitution of each phenyl in 1,3,5-triphenyl-6-oxoverdazyl with three alkoxy groups induces an ordered columnar hexagonal phase (Col_h(o)) below 130°C in 1b[n], while in the alkylsulfanyl analogues 1a[n] additional periodicity along the columns was found rendering the phase a true three-dimensional columnar hexagonal phase (Col_h(3D)) below 60°C. Both series exhibit broad absorption bands in the visible region with maxima at 540 and 610 nm in series 1a[n] and at 486 and 614 nm in series 1b[n]. Unusual reversible thermochromism is observed in series 1b[n], in which the dark green isotropic phase turns red in the discotic phase. Analysis of 1a[8] revealed redox potentials E^0/+1_1/2 = +0.99 V and E^{0/ ?1}_1/2 = –0.45 V vs. saturated calomel electrode (SCE), while the potentials in the alkoxy analogue 1b[8] are shifted cathodically by 0.16 V. Photovoltaic studies of 1a[8] demonstrated hole mobility of μ_h = 1.52 × 10^?3 cm² V^?1 s^?1 in the mesophase with an activation energy E_a = 0.06 ± 0.01 eV. Magnetisation studies of 1a[8] revealed nearly ideal paramagnetic behaviour in either the solid or fluid phase above 200 K and weak antiferromagnetic interactions at low temperatures. In contrast, a noticeable drop of about 4% in μ_eff was observed during the I→Col phase transition in 1b[8], which coincide with the thermochromic effect.     

Structural Characterization of trans-[Cr(NH3)4(H2O)Cl]Cl2 and trans-[Cr(NH3)4Cl2]l

Trans-[Cr(NH₃)₄(H₂O)Cl]Cl₂ (A) crystallizes in the monoclinic space group P2₁/m (No. 11) with a = 6.556(1), b = 10.630(5), c = 6.729(2) Å and β = 96.15(3)°. Trans-[Cr(NH₃)₄Cl₂]I (B) has monoclinic C2/m (No. 12) space group and a = 9.877(2), b = 8.497(2), c = 6.047(2) Å and β = 108.98(2)°. Both unit cells contain two formula units. Cr? Cl, Cr? O(H₂O) and three independent Cr? N(NH₃) distances for A are 2.98(1), 2.023(2), 2.067(2), 2.086(3) and 2.064(3) °. Cr? Cl and Cr? N(NH₃) bonds in B are 2.325(1) and 2.071(2) °. All octahedral angles are close to 90 and 180°. Both structures were refined to very low R values. Water molecule from trans-[Cr(NH₃)₄(H₂O)Cl]²⁺ is hydrogen bonded to both ionic chlorides. Cation and two anions form the motive which repeats itself in the crystal. Cations and anions of the second structure are distributed in layers. Each cation and anion have coordination number eight.     

Persistent Dialkylsilanone Generated by Dehydrobromination of Dialkylbromosilanol

A persistent dialkylsilanone was synthesized by the dehydrobromination of a dialkylbromosilanol with tris(trimethylsilyl)silyl potassium in solution at ?80 °C: It was characterized by NMR and IR spectroscopy, and was tested in several reactions. In ²⁹Si NMR spectrum in [D₈]toluene, the signal due to the unsaturated silicon nuclei was observed at 128.7 ppm. Reactions of the dialkylsilanone with water and mesitonitrile oxide gave a silanediol and a [2+3] cycloadduct, respectively. The silanone remains intact in [D₈]toluene below ?80 °C for at least two days, while it undergoes unprecedented isomerization to give a siloxysilene by means of 1,3‐silyl migration at higher temperatures.     

Radical cations of 1,4-dialkoxybenzenes and alkyl 1,4-dialkoxybenzenes generated through one-electron oxidation by perfluorodiacyl peroxides

Radical cations of 1,4-dialkoxybenzenes 1 and 2 and alkyl 1,4-dialkoxybenzenes 3–9 generated in oxidation of the parent donors by perfluorodi[1-(2-fluorosulfonyl)ethoxy]propionyl peroxide 10 at −40°C and pentafluorobenzoyl peroxide 11 at 15°C were observed by ESR. Radical cation 6^+˙, generated in other oxidation systems, i.e., Ce(SO₄)₂/THF, NH₄/OAc and (NH₄)₂S₂O₈/HOAc, has also been investigated. Based on ESR observation and products analysis, an electron-transfer mechanism of the oxidation reaction is proposed and the influencing factors on hyperfine splitting constants of the radical cations are discussed.