On the Search for H5O2+centered Water Clusters in the Gas Phase

In searching for H₅O₂⁺-centered water clusters, we employed vibrational predissociation spectroscopy and ab initio calculations. Structures of the clusters were characterized by the free- and hydrogen-bonded-OH stretches of ion cores and solvent molecules. Systematic examination of H⁺(H₂O)_5–7 in a supersonic expansion reveals the presence of both cyclic and noncyclic forms of H₅O₂⁺-centered water clusters. The proton transfer intermediate H₅O₂⁺(H₂O)₄ was identified, for the first time, by its characteristic hydrogen-bonded-OH stretches of the ion core at 3178 cm^?1. Also discovered at n = 7 is the H₅O₂⁺-containing five-membered ring isomer, whose existence is evidenced by the observation of a bonded-OH stretching doublet at 3544 and 3555 cm^?1 of the solvent molecules. The observations are in accord with ab initio calculations which forecast that H₅O₂⁺(H₂O)₄ and H₅O₂⁺(H₂O)₅ are, respectively, the lowest-energy isomers of protonated water hexamers and heptamers.     

A Perovskite Electrolyte That Is Stable in Moist Air for Lithium‐Ion Batteries

Solid‐oxide Li⁺ electrolytes of a rechargeable cell are generally sensitive to moisture in the air as H⁺ exchanges for the mobile Li⁺ of the electrolyte and forms insulating surface phases at the electrolyte interfaces and in the grain boundaries of a polycrystalline membrane. These surface phases dominate the total interfacial resistance of a conventional rechargeable cell with a solid–electrolyte separator. We report a new perovskite Li⁺ solid electrolyte, Li_0.38Sr_0.44Ta_0.7Hf_0.3O_2.95F_0.05, with a lithium‐ion conductivity of σ_Li=4.8×10^?4 S cm^?1 at 25 °C that does not react with water having 3≤pH≤14. The solid electrolyte with a thin Li⁺‐conducting polymer on its surface to prevent reduction of Ta⁵⁺ is wet by metallic lithium and provides low‐impedance dendrite‐free plating/stripping of a lithium anode. It is also stable upon contact with a composite polymer cathode. With this solid electrolyte, we demonstrate excellent cycling performance of an all‐solid‐state Li/LiFePO₄ cell, a Li‐S cell with a polymer‐gel cathode, and a supercapacitor.     

Mobilities of H+3 and HeH+ ions in helium gas and rate coefficient for HeH+ + H2 → H+3 + He

The mobilities of mass-identified H⁺₃ and HeH⁺ ions in helium and the reaction rate coefficient for HeH⁺ + H₂ → H⁺₃ + He have been measured by a drift-tube quadrupole mass spectrometer at 300 K. The zero-field reduced mobilities of H⁺₃ and HeH⁺ ions, corrected to 273 K, are 31.0 ± 0.8 and 23.4 ± 0.6 cm² V^?1 s^?1 respectively. The reaction rate coefficient was found to be (1.26 + 0.16) × 10^?9 cm³s^?1 and was observed to be independent of the mean ion kinetic energy in the range from 0.04 to 0.3 eV.     

Quantification of methylamine in the headspace of ethanol of agricultural origin by selected ion flow tube mass spectrometry

Selected ion flow tube mass spectrometry, SIFT-MS, has been used to investigate if absolute levels of trace compounds in the headspace of ethanol/water vapour mixture can be quantified. This case study was directed towards the analysis of methylamine in distilled ethanol of agricultural origin because of its relevance to quality control legislation in the distillery industry. This has required a detailed study of the ion chemistry occurring – initiated by H₃O⁺ precursor ions – when ethanol/water vapour mixtures are introduced into the H₃O⁺/helium carrier gas swarm and has resulted in the construction of a full scheme of the complex ionic reactions that occur. It has been found that under the SIFT-MS flow reactor conditions (He pressure 130 Pa and temperature 299 K) the terminating ions of the several parallel and sequential reactions that occur are the proton bound ethanol clusters ions, C₂H₅OH₂⁺(C₂H₅OH)_n, with n = 1,2,3, proton bound trimer (n = 2) being the dominant species. These ethanol cluster ions can be used as precursor (reagent) ions for the chemical ionisation of the methylamine present in the ethanol/water vapour, which produces two characteristic product ions CH₃NH₂H⁺(C₂H₅OH)_1,2 that are used for the methylamine analysis. The ratio of the product ion count rate to the precursor ion count rate is used in an analogous way to the routinely used for SIFT-MS analyses to quantify the methylamine concentration. The results of calibration experiments show that using SIFT-MS it is possible to quantify methylamine in liquid ethanol/water mixtures at levels of 0.1 mg/L or greater.     

SIFDT study of the SO+2/H2 H-atom abstraction reaction

The exothermic H-atom abstraction reaction of SO⁺₂ with H₂ has been studied in a selected ion flow drift tube (SIFDT) over a range of center-of-mass energies from thermal (300 K) to about 0.12 eV. The measured rate coefficient at 300 K is 4.2 × 10⁻¹² cm³ s⁻¹ which is very much less than the Langevin capture rate. The increase in rate coefficient with ion kinetic energy gives a linear Arrhenius-type plot with a slope that indicates a barrier of ∼5 kJ mol⁻¹ exists on the potential surface. The H₂SO⁺₂ potential surface is also explored in an ab initio investigation using the G2 procedure. An (SO⁺₂.H₂)¹ transition state between reactants and products is identified, corresponding to the barrier found from experiments.     

Cyclic voltammetric study of the catalytic behavior of nickel(I) salen electrogenerated at a glassy carbon electrode in an ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate, BMIMBF4)

Cyclic voltammetry has been employed to examine the electrochemistry of nickel(II) salen at a glassy carbon electrode in an ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate, BMIM⁺BF₄⁻). Residual water in the ionic liquid can be eliminated by introduction of activated molecular sieves into the electrochemical cell. Nickel(II) salen exhibits a one-electron, quasi-reversible reduction to nickel(I) salen, and the latter species serves as a catalyst for the cleavage of carbon–halogen bonds in iodoethane and 1,1,2-trichlorotrifluoroethane (Freon^® 113). In BMIM⁺BF₄⁻ the diffusion coefficient for nickel(II) salen at room temperature has been determined to be 1.8×10⁻⁸ cm² s⁻¹, which is more than 500 times smaller than that (1.0×10⁻⁵ cm² s⁻¹) in a typical organic solvent–electrolyte system such as dimethylformamide (DMF) containing 0.10 M tetramethylammonium tetrafluoroborate.     

Ionic mobilities and hydrophobic interactions in Ph4PCl-NaCl mixtures in hydroorganic solvents

The aim of this work is to correlate the experimental conductimetric ionic behavior with the hydrophobic properties of the Ph₄P⁺ ion. Ionic mobility determinations using radioactive tracers have been extended to Ph₄PCl-NaCl mixtures at a constant 0.5 molar total salt concentration over the whole range of electrolyte mixture composition. Molar conductance measurements have been carried out in water and in H₂O — 5 mole percent acetonitrile and H₂O — 5 mole percent dimethylsulfoxide. Deviations from the additivity law have been found to be maximum for a 0.6 mole fraction of Ph₄PCl. Large negative mixture effects, up to –27% in H₂O have been measured for the limiting case of a cation in trace amounts. The main experimental result is the decrease of the Ph₄P⁺ mobility with increasing proportion of Na⁺ ions in the mixture. The unexpected negative sign of the mixture effect for the less mobile cation is interpreted in terms of solute-solvent hydrophobic interactions and solvent structure. A possible dimerization of the Ph₄P⁺ ion is suggested. Densities of NaCl and Ph₄PCl in the aquo-organic solvents are also included.     

Hydrogen bonding: VII. Low temperature infrared spectral studies of potassium dihydrogen trifluoride,trihydrogen tetrafluoride,and tetrahydrogen pentafluoride; structure of the H3F−4 ION

We have recorded the infrared spectra of crystalline K⁺H₂F₃^?, K⁺H₃F₄^?, and K⁺H₄F₅^? at room temperature and 12–18 K. The broad (4̃00 cm^?1) anion F-H stretching bands for these three salts are not resolved at low temperature; however, in each case the F-H-F bending region is resolved into the maximum number of bands predicted by theory. The complexity of the F-H-F bending mode region shows the H₄F₅^? ion to be of lower symmetry than predicted by X-ray studies. The H₃F₄^? ion has three hydrogen fluorides hydrogen bonded to a central fluoride ion, rather than a chain type structure. The F-H stretching bands for the three ions have very similar frequencies (1750–1800 cm^?1), which shows the hydrogen bonds in the three ions to be of about the same strength, and to be significantly weaker than the hydrogen bond in the HF₂^? ion.     

外电场作用下水化聚全氟磺酸钾膜中水分子的电渗迁移

用分子动力学模拟方法研究外电场(简称电场)作用下水化聚全氟磺酸钾膜中水分子的电渗迁移运动,并分析探讨膜的结构与水分子的电渗迁移特性的关系.结果表明,无外加电场时水分子和K+的速度都服从麦克斯韦分布;施加适当电场时,水分子和K+在垂直电场方向上的速度分量仍服从麦克斯韦分布,但平行电场方向上的速度分量则服从峰值漂移的麦克斯韦分布.并且,峰值漂移速度可作为水分子和K+的平均迁移速度的近似值,从而计算得到水分子的电渗系数.结果还显示,K+第一配位层内平均含有约4.04个水分子,它们的平均迁移速度只有K+的57%.这部分水分子贡献的电渗迁移系数为总电渗迁移系数(2.97)的77%.     

Kinetics of the reaction of C2H5O2 with NO at 295 K

The reaction of C₂H₅O₂ with NO in helium carrier gas at 295 K with [He] = 1.6 × 10¹⁷ cm^?3 has been studied using a gas flow reactor sampled by a mass spectrometer. Because no parent molecular ion or suitable fragment ion produced by C₂H₅O₂ could be detected, the reaction was followed by measuring the formation of NO₂. In so doing, account had to be taken of the small amount of HO₂ known to be present in the reaction mixture, which also leads to NO₂ on reaction with NO. The rate coefficient for the total reaction of C₂H₅O₂ with NO was found to be (8.9 ± 3.0) × 10^?12 cm³/s, and the path which produces NO₂ was found to account for at least 80% of all C₂H₅O₂.     

Die Synthese und einige Eigenschaften von Hydraziniumfluoroscandaten(III)

The synthesis of N₂H₅ScF₄·0.5 HF·0.5 H₂O, N₂H₅ScF₄, and N₂H₆ScF₅ is described. The thermal properties and infrared spectra of the compounds obtained are discussed. The assignation of the bands in infrared spectra (4000 to 250 cm^?1) of the first two compounds is consistent with the presence of hydrazinium⁺¹ ion and for the third one with the presence of hydrazinium⁺² ion.     

Real‐time measurement of peroxyacetyl nitrate using selected ion flow tube mass spectrometry

The on‐line detection of gaseous peroxyacetyl nitrate (PAN) using selected ion flow tube mass spectrometry (SIFT‐MS) has been investigated using a synthetic sample of PAN in air at a humidity of ～30%. Using the H₃O⁺ reagent ion, signals due to PAN at m/z 122, 77 and 95 have been identified. These correspond to protonated PAN, protonated peractetic acid and its water cluster, respectively. These products and their energetics have been probed through quantum mechanical calculations. The rate coefficient of H₃O⁺ has been estimated to be 4.5 × 10^?9 cm³ s^?1, leading to a PAN sensitivity of 138 cps/ppbv. This gives a limit of detection of 20 pptv in 10 s using the [M+H]⁺ ion of PAN at m/z 122. Copyright © 2010 John Wiley & Sons, Ltd.     

Polymer/colloid dual-phase electrolyte membrane for rechargeable lithium batteries

In this work, a polymer/ceramic phase-separation porous membrane is first prepared from polyvinyl alcohol–polyacrylonitrile water emulsion mixed with fumed nano-SiO₂ particles by the phase inversion method. This porous membrane is then wetted by a non-aqueous Li–salt liquid electrolyte to form the polymer/colloid dual-phase electrolyte membrane. Compared to the liquid electrolyte in conventional polyolefin separator, the obtained electrolyte membrane has superior properties in high ionic conductivity (1.9 mS?cm^?1 at 30 °C), high Li⁺ transference number (0.41), high electrochemical stability (extended up to 5.0 V versus Li⁺/Li on stainless steel electrode), and good interfacial stability with lithium metal. The test cell of Li/LiCoO₂ with the electrolyte membrane as separator also shows high-rate capability and excellent cycle performance. The polymer/colloid dual-phase electrolyte membrane shows promise for application in rechargeable lithium batteries.     

Transport of amino acids through liquid membranes III. The alkaline ion role

This paper discusses the alkaline ion (Na⁺) role in the uphill transport of amino acids through a bulk liquid membrane. The aqueous phases (source phase - S and receiving phase - R) are made up of equimolar concentrations of amino acid (4.38 mM p-aminobenzoic acid (PABA)) and alkaline ion (75 mM Na⁺). A chloroform solution containing 5 mM dibenzo-18-crown-6 (DB18C6) represents the bulk liquid membrane (M). The data obtained show that at the S-M interphase, the amino acid is coupled with the carrier via the H₃N⁺ group rather than being transported to the R-M interphase, where Na⁺ substitutes the amino acid. If Na⁺ is absent, the amino acid is transported to the opposite direction. These results support the hypothesis that the presence of Na⁺ ion in the aqueous phases assures the ‘biological’ direction of aminobenzoic acids transport through membranes.     

Syntheses and X-Ray Crystal Structures of Novel Oxonium Ion-12-Crown-4 Complexes Isolated From Liquid Clathrate Media

Abstract

The reactions of Mo(CO)₆ and W(CO)₆ with HCl_(g) in the presence of 12-crown-4 and H₂O have been investigated in toluene. For both reactions, two products were isolated, depending on the oxidation of the metal center. For molybdenum, the Mo^III species, [H₃O⁺ · 12-crown-4]₃[Mo₂Cl₉ ^3-], 1, was obtained from the liquid clathrate layer in the reaction mixture. Upon air oxidation of the reaction mixture, the Mo^v complex, [H₇O₃ ^? · H₄O₂ ⁺ · (12-crown-4)₂][MoOCl₄(H₂O)^?]₂, 2, rapidly formed. For tungsten, the W^II species, [(H₅O₂ ⁺)₂ · 12-crown-4][W(CO)₄Cl^? ₃]₂, 3, deposited from the liquid clathrate layer which upon oxidation formed the W^v complex, [H₃O⁺· 12-crown-4][WOCl₄(H₂O)^?], 4. These reactions were promoted by UV radiation and formed liquid clathrates almost immediately upon reaction. X-ray crystal structures were performed on each compound. Complexes 1 and 4 have H₃O⁺ oxonium ions involved in complex hydrogen bonded arrays with the 12-crown-4 acceptor molecules. The H₅O₂ ⁺ oxonium ions in 2 and 3 contain extremely short O…O separations, equivalent to the shortest O-H…O bonds known. Also isolated in complex 2 was the H₇O₃ ⁺ oxonium ion which contains an unusual linear O…O…O core.     

Highly Reversible Cuprous Mediated Cathode Chemistry for Magnesium Batteries

Sluggish kinetics and poor reversibility of cathode chemistry is the major challenge for magnesium batteries to achieve high volumetric capacity. Introduction of the cuprous ion (Cu⁺) as a charge carrier can decouple the magnesiation related energy storage from the cathode electrochemistry. Cu⁺ is generated from a fast equilibrium between copper selenide electrode and Mg electrolyte during standing time, rather than in the electrochemical process. A reversible chemical magnesiation/de‐magnesiation can be driven by this solid/liquid equilibrium. During a typical discharge process, Cu⁺ is reduced to Cu and drives the equilibrium to promote the magnesiation process. The reversible Cu to Cu⁺ redox promotes the recharge process. This novel Cu⁺ mediated cathode chemistry of Mg battery leads to a high reversible areal capacity of 12.5 mAh cm^?2 with high mass loading (49.1 mg cm^?2) of the electrode. 80 % capacity retention can be achieved for 200 cycles after a conditioning process.     

Proton solvation in methanol solutions of HCl

The MFTIR IR spectra of solutions of HCl in methanol were obtained in the 900–4000 cm^–1 frequency range. It was found that each proton binds two molecules of methanol. The spectra exhibit intense, continuous absorption (CA) with an intensity coefficient at 2000 cm^–1 of 174±10 liter/(mole·cm), which is in agreement with the corresponding coefficient for H₅O ₂ ⁺ . The optical densities of CA are linear functions of the concentration of HCl at 900–1600 cm^–1; there is no linearity at higher frequencies for C_HCl>4 M, and there are less than two molecules of MeOH for each (MeOH)₂H⁺ ion. The results obtained are in agreement with the model in which CA arises in solutions of strong acids because of the interaction of proton vibrations in a strong symmetric H bond with the vibrations of other groups of the proton disolvate.N. N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, 117977 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 10, pp. 2261–2268, October, 1992.     

Thermodynamic representation of the NaCl + Na2SO4 + H2O system with electrolyte NRTL model

A comprehensive thermodynamic model based on the electrolyte NRTL (eNRTL) activity coefficient equation is developed for the NaCl + H₂O binary, the Na₂SO₄ + H₂O binary and the NaCl + Na₂SO₄ + H₂O ternary. The NRTL binary parameters for pairs H₂O-(Na⁺, Cl⁻) and H₂O-(Na⁺, SO₄²⁻), and the aqueous phase infinite dilution heat capacity parameters for ions Cl⁻ and SO₄²⁻ are regressed from fitting experimental data on mean ionic activity coefficient, heat capacity, liquid enthalpy and dissolution enthalpy for the NaCl + H₂O binary and the Na₂SO₄ + H₂O binary with electrolyte concentrations up to saturation and temperature up to 473.15 K. The Gibbs energy of formation, enthalpy of formation and heat capacity parameters for solids NaCl_(s), NaCl·2H₂O_(s), Na₂SO_4(s) and Na₂SO₄·10H₂O_(s) are obtained by fitting experimental data on solubilities of NaCl and Na₂SO₄ in water. The NRTL binary parameters for the (Na⁺, Cl⁻)-(Na⁺, SO₄²⁻) pair are regressed from fitting experimental data on dissolution enthalpies and solubilities for the NaCl + Na₂SO₄ + H₂O ternary.     

Preparation and Application of Cholesteryl‐Benzo‐15‐Crown‐5/Cholesteryl Mixed Liquid Crystals

Various mixed liquid crystals containing crown ether‐cholesteryl liquid crystal, benzo‐15‐crown‐5‐COO‐C₂₇H₄₅ (B15C5‐COOCh), with various common cholesteric liquid crystals, e.g., cholesteryl chloride, cholesteryl benzoate and cholesteryl palmitate, were prepared and studied using polarizing microscopy and differential scanning calorimetry. Investigating the concentration effect of B15C5‐COOCh in mixed liquid crystals revealed that the addition of B15C5‐COOCh resulted in wider phase transition temperature ranges of these cholesteryl liquid crystals. The stability of these B15C5‐COOCh/cholesteryl mixed liquid crystals was studied using comprehensive graphic molecular modeling computer programs (Insight II and Discover) to calculate their molecular energy and stability energy. The effect of salts, e.g. Na⁺, Co³⁺, Y³⁺ and La³⁺, on the transition temperature range of the mixed liquid crystals was also investigated. The crown ether cholesteric liquid crystal B15C5‐COOCh was applied both as a surfactant and an ion transport carrier to transport metal ions through liquid membranes. Cholesteryl benzo‐15‐crown‐5 exhibited distinctive characteristics of a surfactant and the critical micellar concentration (CMC) of the surfactant was investigated by the pyrene fluorescence probe method. Cholesteryl benzo‐15‐crown‐5 was successfully applied as a good ion transport carrier (Ionophore) to transport various metal ions, e.g. Li⁺, Na⁺, La³⁺, Fe³⁺ and Co³⁺, through organic liquid membranes. The transport ability of the cholesteryl benzo‐15‐crown‐5 surfactant for these metal ions was in the order: Co³⁺ ≥ Li⁺ > Fe³⁺ > Na⁺ > La³⁺.     

Anion-tethered Single Lithium-ion Conducting Polyelectrolytes through UV-induced Free Radical Polymerization for Improved Morphological Stability of Lithium Metal Anodes

Single Li⁺ ion conducting polyelectrolytes (SICs), which feature covalently tethered counter-anions along their backbone, have the potential to mitigate dendrite formation by reducing concentration polarization and preventing salt depletion. However, due to their low ionic conductivity and complicated synthetic procedure, the successful validation of these claimed advantages in lithium metal (Li⁰) anode batteries remains limited. In this study, we fabricated a SIC electrolyte using a single-step UV polymerization approach. The resulting electrolyte exhibited a high Li⁺ transference number (t₊) of 0.85 and demonstrated good Li⁺ conductivity (6.3×10⁻⁵ S/cm at room temperature), which is comparable to that of a benchmark dual ion conductor (DIC, 9.1×10⁻⁵ S/cm). Benefitting from the high transference number of SIC, it displayed a three-fold higher critical current density (2.4 mA/cm²) compared to DIC (0.8 mA/cm²) by successfully suppressing concentration polarization-induced short-circuiting. Additionally, the t₊ significantly influenced the deposition behavior of Li⁰, with SIC yielding a uniform, compact, and mosaic-like morphology, while the low t₊ DIC resulted in a porous morphology with Li⁰ whiskers. Using the SIC electrolyte, Li⁰||LiFePO₄ cells exhibited stable operation for 4500 cycles with 70.5 % capacity retention at 22 °C.