Synthesis of symmetrical acetylenic hydrocarbons and their α,ω-di-derivatives from α,α,α-trichloro- and α,α,α,ω-tetrachloro-alkanes

Summary By the action of sodium in xylene on polychloro hydrocarbons containing -CCl₂-CCl₂- or- CC1=CC1-, groupings the corresponding symmetrical acetylenic hydrocarbons containing 10,14, and 18 carbon atoms in the molecule were obtained. From ,-disubstituted tetrachloroalkanes by the same method 1,10-diethoxy-5-decyne, 1,14-diethoxy-7-tetradecyne, and 1,14-bisdiethylamino-7-tetradecyne were obtained.The spectra were determined in the Optical Laboratory of the Institute of Heteroorganic Compounds of the USSR by N. A. Chumaevskii, who we thank.     

A facile synthesis of α,α,ω,ω-tetrahalo-α,ω-dicarboxylic esters

The synthesis of some α,α,ω,ω-tetrachloro and tetrabromo-derivatives of the hypolipidemic 3,3,14,14-tetramethylhexadecanedioic acid from α,ω-dihalo-esters, carbon tetrahalides and lithium diisopropyl amide has been described. Interaction of α,ω-dichloro esters with CBr₄ was shown to give the expected α,ω-dibromo-α,ω-dichloro compounds, but treatment of bis(l-methylethyl) 2,15-dibromo-3,3,14,14-tetramethylhexa-decanedioatewith CCl₄ was found to result in halogen exchange yielding the tetrachloro-diester as the major product.     

Synthesis and characterization ofα-{3-[(2,3-dihydroxy) propoxy]propyl}-ω-butylpolydimethylsiloxanes

Hydrosilylation has been carried out between Si-H terminated polydimethylsiloxanes with narrow molecular weight distribution and protected 3-allyloxy-1,2-propanediol,and after subsequently alcoholyzed,α-{3-[(2,3-dihydroxy)propoxy]propyl}-ω-butyl -polydimethylsiloxanes with varying number of((Si(CH_3)_2-O) unit were obtained.At each step,the produced compounds were carefully characterized.The results showed that each step was successfully carried out and target products were achieved.     

[6π+2π]-Cycloaddition of α,ω-Diallenes and α,ω-Diacetylenes to 1,3,5-Cycloheptatriene in the Presence of TiCl4-Et2AlCl

[6π+2π]-Cycloaddition of α,ω-diallenes and α,ω-bis(trimethylsilyl)diacetylenes to 1,3,5-cycloheptatriene in the presence of a two-component catalytic system TiCl₄-Et₂AlCl was performed that led to the formation of bis(endo-bicyclo[4.2.1]nona-2,4-dienes) and bis(8-trimethylsilyl-endo-bicyclo[4.2.1]nona-2,4,7-trienes) linked by polymethylene spacer in 69–86% yields.     

Electrochemical oxidation of tetramethyl esters of α,α,ω,ω-alcaneteracarboxylic acids

Cyclization of esters of butane-1,1,4,4- and pentane-1,1,5,5-tetracarboxylic acids during electrolysis in methanol in the presence of Nal produces, with a yield of 95%, the esters of cyclobutane-1,1,2,2- and cyclopentane-1,1,2,2-tetracarboxylic acids. Under similar conditions, esters of the highest ,,,-alkanetetracarboxylic acids undergo iodation and hydroxymethylation due to electrical oxidation of methanol to formaldehyde. During electrolysis in methanol in the presence of NaOAc, the esters of ,,,-alkanetetracarboxylic acids undergo effective hydroxymethylation, followed by cyclization into substituted five- and six-member lactones, or tetrahydrofurans when structurally possible.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 10, pp. 2332–2339, October, 1992.     

Densities, Heat Capacities and Asymmetric Criticality of Coexistence Curves for Binary Mixtures {Dimethyl Adipate + n-Heptane or n-Octane}

Densities of binary mixtures {x dimethyl adipate + (1 ? x) n-heptane} and {x dimethyl adipate + (1 ? x) n-octane} were measured at various temperatures. The excess molar volumes were calculated from the density data and fitted with the Redlich–Kister equation. The critical anomaly of density was detected for {x dimethyl adipate + (1 ? x) n-octane} binary solutions with the critical compositions in a narrow temperature range of the near-critical one-phase region. However, the density anomaly and the excess properties were taken into account in a test of the complete scaling theory and found to be negligible. The isobaric heat capacities per unit volume of the {x dimethyl adipate + (1 ? x) n-heptane} and {x dimethyl adipate + (1 ? x) n-octane} binary solutions at the critical compositions were also determined over the temperature range both near and far away from the critical points. It was found that the heat capacity plays an important role in describing the asymmetry of the coexistence curves.     

Synthesis and characterization of α,ω-dichloro-polymethylphenylsilane

The synthesis of a functional polysilane, α,ω-dichloro-polymethylphenylsilane (α,ω-dichloro-PMPS), based on the Wurtz-type reductive coupling, has been considered. A study of some reaction parameters shows that both yield and molecular weight distribution of α,ω-dichloro-PMPS can be greatly influenced by the work-up conditions, reaction time, monomer concentration and temperature during the initiation of the polymerization. By varying the synthesis conditions, different ratios of high and low molecular weight fractions were obtained. Samples of different molecular weight were isolated by fractional precipitation of the crude polymers. The chlorine-end functionalization was confirmed by ²⁹Si NMR spectroscopy and the concentration of end-groups was quantitatively determined by elemental analysis of chlorine.     

Iridium-catalyzed [2 + 2 + 2] cycloaddition of α,ω-diynes with nitriles

[Ir(cod)Cl](2)/DPPF or BINAP efficiently catalyzed the cycloaddition of α,ω-diynes with nitriles to give pyridines. The reaction can accommodate a very wide range of nitriles. Both aliphatic and aromatic nitriles smoothly reacted with α,ω-diynes to give pyridines. Ten equivalents of unactivated aliphatic nitrile were enough to give the product in high yield. Aliphatic nitriles bearing an acetal or amino moiety could be used for the reaction. The highly regioselective cycloaddition of unsymmetrical diyne bearing two different internal alkyne moieties was achieved. The observed regioselectivity could be reasonably explained by considering the different reactivities of the α-position in iridacyclopentadiene. Regioselective cycloaddition was successfully applied to the synthesis of terpyridine and quinquepyridine. This chemistry was extended to a new and efficient synthesis of oligoheteroarenes. Five aromatic or heteroaromatic rings were connected in a single operation. [Ir(cod)Cl](2)/chiral diphosphine catalyst can be applied to enantioselective synthesis. Kinetic resolution of the racemic secondary benzyl nitrile catalyzed by [Ir(cod)Cl](2)/SEGPHOS gave a central carbon chiral pyridine in 80% ee. The mechanism was analyzed on the basis of the B3LYP level of density functional calculations.     

Iridium-catalyzed [2+2+2] cycloaddition of α,ω-diynes with isocyanates

[Ir(cod)Cl](2)/BINAP was found to be an efficient catalyst for the [2+2+2] cycloaddition of α,ω-diynes with isocyanates to give 2-pyridones. A wide range of isocyanates can be used for this reaction. Both aliphatic and aromatic isocyanates smoothly reacted with α,ω-diynes to give 2-pyridones in high yields. Aliphatic isocyanates were more reactive than aromatic isocyanates. For aromatic isocyanates, the electronic properties of the substituents affected the reactivity: electron-donating substituents enhanced the reaction. The reaction of unsymmetrical α,ω-diynes possessing two different internal alkyne moieties with isocyanates was regiospecific and gave a single product. This regioselectivity could be explained by the reaction of iridacyclopentadiene with a nitrogen-carbon double bond. The regioselectivity of the reaction of malonate-derived diyne was controlled by a steric effect, while that of the reaction of ester-tethered diyne was controlled by an electronic effect. [Ir(cod)Cl](2)/chiral diphosphine catalyst could be used for the enantioselective synthesis of C-N axially chiral 2-pyridone. The reaction of diyne 1a with o-methoxyphenyl isocyanate (7a) gave C-N axially chiral 2-pyridone (R)-8aa in 78% yield with 94% ee.     

Iridium-catalyzed [2+2+2] cycloaddition of α,ω-diynes with alkynyl ketones and alkynyl esters

We found that the combination of [Ir(cod)Cl]₂ and rac-BINAP served as an efficient catalyst for the [2+2+2] cycloaddition of 2,7-nonadiyne derivatives and related compounds with alkynyl ketones and alkynyl esters. The corresponding products were obtained in high yields under mild reaction conditions.     

Spectral and intramolecular charge transfer properties in terminal donor/acceptor-substituted all-trans-α,ω-diphenylpolyenes and α,ω-diphenylpolyynes

The absorption spectra and intramolecular charge transfer (CT) properties of terminal donor/acceptor-substituted all-trans-α,ω-diphenylpolyenes (DPE) and α,ω-diphenylpolyynes (DPY) molecules with different conjugated bridge length and substitution modes were investigated by using quantum chemical calculations. We calculated the ground state structures and energy of two series of terminal donor/acceptor DPE and DPY by DFT method. The dependence of conjugation length and substitution modes of the electronic absorption spectra was obtained by TDDFT calculation. The hybrid-GGA XC-functional PBE0 employed in this work was selected from several functionals by comparing the calculated electronic spectral data with experimental value. The CIS-based generalized Mulliken-Hush (GMH) approach was further used to calculate coupling values H(AD) of the CT process. The calculation shows that both the HOMO-LUMO energy gaps and average bond length alternations between unsaturated multiple (C≡C and C=C) and saturated single bonds (C-C) decrease regularly with the extension of conjugation. The effective conjugated length (ECL) of DPE and DPY with the same order MM > MP/PM > PP is found together with the regular red shift of the electronic absorption spectra with the extension of conjugation, resulting from the different π-electron delocalization and conjugation efficiency. The GMH analysis further suggests that the CT process in both DPE and DPY is predominated by the through-bond mechanism. The remarkable difference of the conjugated length dependence of squared CT coupling between substituted DPE and DPY is the result of the energetic matching degree of the frontier molecular orbitals between donor/acceptor and the conjugated bridge.     

Synthesis and characterization of α-{3-[2-hydroxy-3-(N-methyl-N-hydroxy-ethylamino)propoxy]propyl}-ω-butylpolydimethylsiloxanes.

α-{3-[2-hydroxy-3-(N-methyl-N-hydroxyethylamino)propoxy]propyl}-ω-butylpolydimethylsiloxanes Ⅲ with various moleculax weights were prepared by epoxy addition of α-[3-(2,3-epoxy-propoxy)propyl]-ω-butylpolydimethylsiloxanes Ⅱ and Nmethylmonoethanolamine.At each step.the outcome compounds were characterized through FT-IR and NMR spectra,the results showed that each step was successfully carried out and objective products were achieved.     

Synthesis and characterization of α-{ 3-[2-hydroxy-3- （N-methyl-N-hydroxy-ethylamino）propoxy]propyl}-ω- butylpolydimethylsiloxanes

α-{ 3-[2-hydroxy-3-（N-methyl-N-hydroxyethylamino）propoxy]propyl }-α-butylpolydimethylsiloxanes III with various molecu- lar weights were prepared by epoxy addition of α-[3-（2,3-epoxy-propoxy）propyl]-α-butylpolydimethylsiloxanes Ⅱ and N- methylmonoethanolamine. At each step, the outcome compounds were characterized through FT-IR and NMR spectra, the results showed that each step was successfully carried out and objective products were achieved.     

Solid-state [2+2] photodimerization and photopolymerization of α,ω-diarylpolyene monomers: effective utilization of noncovalent intermolecular interactions in crystals

[2+2] Photocycloaddition of olefins is a very useful reaction in synthetic organic chemistry to obtain cyclobutane-containing molecules, which are almost inaccessible by other methods. The reaction, when performed in the crystalline state, occurs more efficiently and selectively than in homogeneous solution due to tight and regular molecular arrangement in the crystal state. Despite numerous examples for the solid-state [2+2] photodimerization of monoenes, however, it is still a challenge to prepare not only dimers but also higher oligomers and polymers from conjugated polyenes, which have multiple reactive double bonds in a molecule. In our recent studies of the solid-state photoreactions of α,ω-diarylpolyenes, noncovalent intermolecular interactions in crystals were effectively utilized to prealign molecules in stacking arrangements, suitable for the [2+2] reaction. With appropriate ring-substituents, [2+2] photodimerization and photopolymerization of the polyenes took place, although the degree of polymerization was relatively low. This review will describe the details of these reactions.     

Apparent Molar Volumes and Solvation Coefficients in Ternary-pseudo-binary Mixtures [（Styrene＋Ethyl Acetate or Benzene）＋（N-Methyl-2-pyrrolidone＋Ethyl Acetate or Benzene）]

Over the full range of compositions,in the ternary-pseudo-binary mixtures of x[(1-y)C6H5CH=CH2+ yCH3COOC2H5(or C6H6)]+(1-x)[(1-y)NMP+yCH3COOC2H5(or C6H6)],the apparent molar volumes of each pseudo-pure component at different y values were calculated from the density data at 298.15 K and atmospheric pressure.The results show that the four parameters cubic polynomial can correlate the apparent molar volume with the molar fraction well over the full molar fraction range.The limiting partial molar volumes and the molar volumes of each pseudo-pure component were evaluated with different methods.Based on the limiting partial molar volume and molar volume at a certain y value,a new universal coefficient termed as solvation coefficient γ was defined to describe quantitatively the solvation degree of pseudo-pure solute and the interactions of solute-solvent molecules from the macroscopical thermodynamics viewpoint.The results demonstrate the solvation coefficients decrease with the amount of the third component increasing for each pseudo-pure solute,irrespective of the pseudo-pure solvent.Then the solvation degrees of each pseudo-pure component,the specific interactions between the solute molecule and the solvent one were discussed in terms of the solvation coefficient.     

Synthesis and structural study of α-amino- and α,ω-diamino oligoamides-11

α-Amino (MAO) and α,ω-diamino (DAO) oligoamides were prepared using dodecylamine or 1,6 diaminohexane as a chain limitator. These were characterized by GPC, ¹H-NMR and ¹³C-NMR; molecular models: N-dodecyldodecanamide and 1,6 bis dodecylaminohexane; trifluoroacetylation was used to dissolve the oligoamides. DAO prepared in the melt contains two types of chains, depending on the position of the limitator. When oligomers were prepared in solution using the Yamazaki method, the presence of residual phosphorus derivatives in the oligoamides could not be avoided.