Abraham model correlations for describing solute transfer into anhydrous 1,2-propylene glycol for neutral and ionic species

Experimental solubility, acid-dissociation constants (pK_a) and activity coefficient data have been compiled from the published pharmaceutical and chemical literature for neutral organic molecules and ionic species dissolved in anhydrous 1,2-propylene glycol. The compiled experimental data were transformed into molar solubility ratios, water-to-anhydrous propylene glycol (P) and gas-to-anhydrous propylene glycol (K) using standard thermodynamic relationships. The derived Abraham model correlations described the observed solubility and partition coefficient data of neutral organic compounds and ionic species to within 0.18 log units and 0.18 log units (or less), respectively.     

Correlation and prediction of partition coefficient between the gas phase and water, and the solvents dry methyl acetate, dry and wet ethyl acetate, and dry and wet butyl acetate

Experimental partition coefficient data have been compiled from the published literature for the water/methyl acetate, water/ethyl acetate and water/butyl acetate partition systems, log P data, and for the gas/methyl acetate, gas/ethyl acetate and gas/butyl acetate partition systems, log K data. Application of the Abraham solvation parameter model to the sets of partition coefficients leads to equations that correlate the log P data and log K data to 0.18 log units for the three dry alkyl acetate solvents. Slightly larger deviations were noted for solute partition into both wet ethyl acetate and wet butyl acetate. The derived correlations were validated using training set and test set analyses.     

Abraham model ion-specific equation coefficients for the 1-butyl-2,3-dimethyimidazolium and 4-cyano-1-butylpyridinium cations calculated from measured gas-to-liquid partition coefficient data

Partition coefficient and gas solubility data have been assembled from the published chemical and engineering literature for solutes dissolved in anhydrous 1-butyl-3-methylimidazolium dicyanamide, 1-butyl-2,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide, and 4-cyano-1-butylpyrridinium bis(trifluoromethylsulfonyl)imide. More than 60 experimental data points were gathered for each IL solvent. The compiled experimental data were used to derive Abraham model correlations for describing the solute transfer properties into the three anhydrous IL solvents from both the gas phase and water. The derived mathematical correlations described the observed solute transfer properties, expressed as the logarithm of the water-to-IL partition coefficient and logarithm of the gas-to-IL solvent partition coefficient, to within standard deviations of 0.125 log units (or less). Abraham model ion-specific equation coefficients are also calculated for the 1-butyl-2,3-dimethylimidazolium and 4-cyano-1-butylpyridinium cations.     

Abraham model correlations for transfer of neutral molecules and ions to sulfolane

Data have been compiled from the published literature on the partition coefficients of solutes and vapors into anhydrous sulfolane. The logarithms of the water-to-sulfolane partition coefficients, log P, and gas-to-sulfolane partition coefficients, log K, were correlated with the Abraham solvation parameter model. The derived correlations described the observed log P and log K values for solutes dissolved in sulfolane to within average standard deviations of 0.14 log units or less. The log P correlation was extended to include the partition of ions by inclusion of a cation-solvent and an anion-solvent term.     

Development of Abraham model correlations for solvation characteristics of linear alcohols

Data have been compiled from the published literature on the partition coefficients of solutes and vapors into the anhydrous linear alcohols (methanol through 1-heptanol, and 1-decanol) from both water and from the gas phase. The logarithms of the water-to-alcohol partition coefficients (log P) and gas-to-alcohol partition coefficients (log K) were correlated with the Abraham solvation parameter model. The derived correlations described the observed log P and log K values to within average standard deviations of 0.14 and 0.12 log units, respectively. The predictive abilities of the each correlation were assessed by dividing databases into a separate training set and test set.     

Ion-specific equation coefficient version of the Abraham model for ionic liquid solvents: determination of coefficients for tributylethylphosphonium, 1-butyl-1-methylmorpholinium, 1-allyl-3-methylimidazolium and octyltriethylammonium cations

Gas-to-ionic liquid partition coefficient data have been assembled from the published chemical literature for solutes dissolved in 1-allyl-3-methylimidazolium dicyanamide, 1-allyl-3-methylimidazolium bis(trifluoromethylsulphonyl)imide, octyltriethylammonium bis(trifluomethyl-sulphonyl)imide, tributylethylphosphonium diethylphosphate and 1-butyl-1-methylmorpholinium tricyanomethanide. The published experimental data were converted to water-to-ionic liquid partition coefficients using standard thermodynamic relationships. Both sets of partition coefficients were correlated with the Abraham solvation parameter model. The derived Abraham model correlations described the observed partition coefficient data to within 0.13 log units. Cation-specific equation coefficients were calculated for each of the cations present in the five ionic liquid solvents studied. The calculated cation-specific equation coefficients can be combined with previously reported ion-specific equation coefficients for 19 different anions to yield Abraham model correlations for predicting the partitioning the behaviour of solutes in 76 different anhydrous ionic liquid solvents.     

Abraham model correlations for solute transfer into benzyl alcohol from both water and the gas phase

ABSTRACT

Experimental solubilities have been determined for anthracene, benzil, 2-chloroanthraquinone, 9-fluorenone, 2-hydroxybenzoic acid, 2-methoxybenzoic acid, 2-methylbenzoic acid, 3-methylbenzoic acid, phenothiazine, pyrene, and thioxanthen-9-one dissolved in benzyl alcohol at 298.15 K. The measured solubility data, combined with previously published activity coefficient and solubility data, are used to determine Abraham model correlations for solute transfer to benzyl alcohol from both water and from the gas phase. The derived Abraham model correlations were found to back-calculate the experimental partition coefficients and solubility ratios to within 0.14 log units (or less).     

Infinite dilution activity coefficients and gas-to-liquid partition coefficients of organic solutes dissolved in 1-sec-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide and in 1-tert-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

Inverse gas chromatography was used to measure infinite dilution activity coefficients and gas-to-liquid partition coefficients for 48 organic solute probes in either 1-sec-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide or 1-tert-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide in the temperature range from 323.15 to 373.15 K. Partial molar excess enthalpies of solution were calculated from the variation of the infinite dilution activity coefficients with temperature. Abraham model correlations were also derived from the experimental partition coefficient data. The derived Abraham model correlations describe the observed partition coefficients to within 0.11 log units.     

Abraham Model Correlations for Transfer of Neutral Molecules to Tetrahydrofuran and to 1,4-Dioxane,and for Transfer of Ions to Tetrahydrofuran

Data have been compiled from the published literature for the partition coefficients of solutes and vapors into anhydrous tetrahydrofuran and 1,4-dioxane. The logarithms of the water-to-ether partition coefficients, log₁₀ P, and gas-to-ether partition coefficients, log₁₀ K, were correlated with the Abraham solvation parameter model. The derived correlations described the observed log₁₀ P and log₁₀ K values for both ether solvents to within average standard deviations of 0.16 log₁₀ units or less. The log₁₀ P correlation for tetrahydrofuran was extended to include the partition of ions by inclusion of a cation-solvent and an anion-solvent term.     

Correlation of the Solubilizing Abilities of 1-Butyl-1-methylpiperidinium Bis(trifluoromethylsulfonyl)imide and 1-Butyl-1-methylpyrrolidinium Tetracyanoborate

Chromatographic retention data were measured for a wide range of organic solutes on 1-butyl-1-methylpyrrolidinium tetracyanoborate ([BMPyrr]⁺[B(CN)₄]^?) and 1-butyl-1-methyl-piperidinium bis(trifluoromethylsulfonyl)imide ([BMPip]⁺[Tf₂N]^?) stationary phases at 323 K and 353 K. The measured retention factors were combined with published infinite dilution activity coefficient and gas-to-water partition coefficient data to yield gas-to-anhydrous ionic liquid (IL) and water-to-anhydrous IL partition coefficients. Both sets of partition coefficients were analyzed using the Abraham model. The derived Abraham model correlations describe the observed gas-to-IL (log₁₀ K) and water-to-IL (log₁₀ P) partition coefficient data to within average standard deviations of about 0.10 and 0.15 log₁₀ units, respectively.     

Automatic log P estimation based on combined additive modeling methods

Summary A program for the automatic estimation of the logarithm of the partition coefficient between 1-octanol and water phases (log P) has been developed as a component of a system entitled CHEMICALC (Combined Handling of Estimation Methods Intended for Completely Automated Log P Calculation). Log P values are calculated based on additive group contributions to log P. Three sets of groups are defined, and their contributions have been derived from the experimental log P values of 1465 molecules. The system divides a structural formula of a compound of interest into the groups whose increments are provided and then calculates its log P value. All processing after structure input is fully automated. This system has been tested for predicting the log P values of 1686 compounds. The accuracy is sufficient for many practical purposes.     

Correlation of the Solubilizing Abilities of 1-Butyl-1-methyl-pyrrolidinium Tris(pentafluoroethyl)trifluorophosphate, 1-Butyl-1-methylpyrrolidinium Triflate and 1-Methoxyethyl-1-methylmorpholinium Tris(pentafluoroethyl)trifluorophosphate

Chromatographic retention data were measured for a wide range of organic solutes on 1-butyl-1-methylpyrolidinium tris(pentafluoroethyl)trifluorophosphate ([BMPyrr]⁺[FAP]^?), 1-butyl-1-methylpyrrolidinium triflate, ([BMPyrr]⁺[Trif]^?), and 1-methoxyethyl-1-methylmorpholinium tris(pentafluoroethyl)trifluorophosphate, ([MeoeMMorp]⁺[FAP]^?), stationary phases at (323, 353 and 383) K. The measured retention factors were combined with published infinite dilution activity coefficient and gas-to-water partition coefficient data to yield gas-to-anhydrous ionic liquid (IL) and water-to-anhydrous IL partition coefficients. The three sets of partition coefficients were analyzed using the Abraham model. The derived Abraham model correlations describe the observed gas-to-IL (log₁₀ K) and water-to-IL (log₁₀ P) partition coefficient data to within average standard deviations of about 0.11 and 0.15 log₁₀ units, respectively.     

Gas to olive oil partition coefficients: a linear free energy analysis

Literature values of gas to olive oil partition coefficients at 37 degrees C have been assembled for 218 compounds. Application of an Abraham linear free energy equation correlates 215 compounds with R2=0.981 and a standard deviation, SD, of 0.196 log units. One hundred and eight compounds were then used as a training set, and the resulting equation was used to predict the remaining 107 compounds with an average error of 0.025, an absolute average error of 0.150, and a standard deviation of 0.224 log units. The linear free energy equation shows that as a solvent olive oil is not very polar but is reasonably basic, although with a weaker hydrogen bond base than ethyl acetate or acetone, and has no hydrogen bond acidity. The coefficients for partition from the gas phase to biological phases such as blood and brain lie between those for water and olive oil, which explains why gas to biological phase partition can be described in an empirical way by a combination of gas to olive oil and gas to saline coefficients.     

Development of Abraham model IL-specific correlations for N-triethyl(octyl)ammonium bis(fluorosulfonyl)imide and 1-butyl-3-methylpyrrolidinium bis(fluorosulfonyl)imide

ABSTRACT

Abraham model correlations are derived for describing gas-to-ionic liquid and water-to-ionic liquid partition coefficients from published experimental data for solutes dissolved in both N-triethyl(octyl)ammonium bis(fluorosulfonyl)imide and 1-butyl-3-methyl-pyrrolidinium bis(fluorosulfonyl)imide. Derived Abraham model correlations describe the observed partition coefficient data to within 0.13 log units. As part of the current study the existing equation coefficients for the N-triethyl(octyl)ammonium cation were updated and reported for the first time were equation coefficients for the bis(trifluorosulfonyl)imide anion.     

Extrathermodynamic approach to the study of the adsorption of organic compounds by macromolecules

By using substituent constants and regression analysis, an analysis has been made of the binding of derivatives of aniline and acetanilide to nylon and rayon, the experimental data of Ward and Upchurch being used. The amount of organic compounds bound from an aqueous solution by these two types of synthetic macromolecules is shown to be related to the octanol–water partition coefficients P. In the case of the aniline derivatives, where the basicity of the compounds varied considerably, a good model describing binding results from the linear combination of the two parameters related to free energy, i.e., log P and ΔpK_a. The latter term is the difference between pK_a for aniline and a particular derivative. For the neutral acetanilides a simple linear free-energy relation between log P and log K is found. Of special note is the fact that the dependence of binding of these two classes of compounds to two classes of synthetic macromolecules as indicated by the coefficient with the log P term very closely parallels that found for a variety of biopolymers. The mechanism of hydrophobic binding seems to be the same in both the synthetic and natural polymers.     

Dependence of the distribution constant in liquid–liquid partition equilibria on the van der Waals molecular surface area

The direct calculation of free energy of interactions between a solute j and two immiscible liquids shows a linear dependence between the (logarithm of) the distribution constant in liquid–liquid partition equilibrium log K_j and the van der Waals surface area of the solute. The study provides a thermodynamic proof for the formula log K_BA,j = c₁ log K_BC,j + c₂ that describes the linear dependence between (the logarithm of) the distribution constant for a solute j in a solvent system (B/A) and (the logarithm of) the distribution constant for the same solute in a different solvent system (B/C). This relation has been well proven by various experimental studies and it is frequently used in liquid chromatographic separations as well as in liquid–liquid extractions, but was not explained previously based on thermodynamic results. The theory was verified using the prediction of octanol/water distribution constants log K_ow for a wide range of molecules, including hydrocarbons and compounds with a variety of functional groups. The results have also been verified for the distribution constants in other solvent systems. The expression for the distribution constant obtained in this study also gives a theoretical base for the additive fragment methodology used for the prediction of log K_ow.