Volumetric Properties of Ethylbenzene with Ethyl Acrylate,Butyl Acrylate,Methyl Methacrylate,and Styrene at 298.15 K

Densities of the binary systems of ethylbenzene with ethyl acrylate, butyl acrylate, methyl methacrylate, and styrene have been measured as a function of the composition, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densitometer. The calculated excess volumes were correlated with the Redlich-Kister equation and with a series of Legendre polynomials. The excess volumes are positive for the systems ethylbenzene + (methyl methacrylate, ethyl acrylate) and negative for the systems ethylbenzene + (butyl acrylate, styrene).     

Direct Evaluation of Partial Molar Volumes of Binary Solutions of Dimethyl Sulfoxide with Ethyl Acrylate,Butyl Acrylate,Methyl Methacrylate and Styrene

The Tikhonov regularization is applied to convert specific molar volume data of binary solutions of dimethyl sulfoxide with a number of acrylates and with styrene into their second- and first-partial derivatives with respect to mole fraction under constant temperature and pressure. Generalized Cross Validation is used to guide the selection of the regularization parameter that keeps noise amplification under control. The resulting first derivative is then used to compute the partial molar volumes. These are compared against that obtained by the traditional method of least-squares fitting of excess molar volumes. Some of the advantages of the current approach and possible extension to other partial molar quantities are briefly discussed.     

Density, Excess Volumes, and Partial Volumes of the Binary Systems of Dimethyl Sulfoxide + Ethyl Acrylate, Butyl Acrylate, Methyl Methacrylate, and Styrene at 298.15 K

Densities of the binary systems of dimethyl sulfoxide with ethyl acrylate, butyl acrylate, methyl methacrylate, and styrene have been measured as a function of the composition at 298.15 K and atmospheric pressure using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess volumes are negative for the four binaries, probably as a result of the large dipole moment of DMSO, becoming smaller as the monomer becomes more branched or longer, and the dipole moment per monomer unit becomes larger.     

Volumetric Properties of Toluene with Ethyl Acrylate, Butyl Acrylate, Methyl Methacrylate, and Styrene at 25°C

Densities of the binary systems of toluene with ethyl acrylate, butyl acrylate, methyl methacrylate, and styrene have been measured as a function of the composition, at 25°C and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densitometer. The calculated excess volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess volumes are negative for systems toluene + (ethyl acrylate, butyl acrylate, and styrene) and positive for the system toluene + methyl methacrylate.     

Density and Volumes of Mixing of the Ternary System Ethylbenzene + Styrene + Ethyl Acrylate and its Binaries at 298.15 K

Densities of the ternary system, ethylbenzene + styrene + ethyl acrylate, and its three binaries have been measured in the whole composition range at 298.15 K and atmospheric pressure using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess molar volumes are positive for the binary system, ethylbenzene + ethyl acrylate, and negative for the systems ethylbenzene + styrene and styrene + ethyl acrylate. The corresponding data were correlated with the Redlich-Kister equation and with a series of Legendre polynomials. Several models were used to correlate the ternary behavior from the excess molar volume data of their constituent binaries and were found to fit the data equally well. The best fit was based on a direct approach, without information on the component binary systems.     

Volumetric properties of cyclohexane with ethyl acrylate, butyl acrylate, methyl methacrylate, and styrene at 298.15 K

Densities of the binary systems of cyclohexane with ethyl acrylate (EA), butyl acrylate (BA), methyl methacrylate (MMA), and styrene have been measured as a function of the composition, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densitometer. The calculated excess volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess volumes are positive for the systems reported here.     

Excess Molar Volumes and Partial Molar Volumes of Binary Mixtures Containing Diethylcarbonate with Benzene and Substituted Benzenes at 293.15 K

Densities of the binary mixtures of diethylcarbonate with benzene and substituted benzenes, namely toluene, bromobenzene, chlorobenzene and nitrobenzene have been measured as a function of the composition, at 293.15 K and atmospheric pressure using a bicapillary pycnometer with an accuracy of 4 parts in 10⁴.The calculated excess molar volumes, V ^E were correlated with Redlich-Kister equation. The excess molar volumes are negative over the entire range of composition for the systems diethylcarbonate with benzene, toluene, bromobenzene and nitrobenzene. An inversion of the sign of V ^E is observed over some concentration for mixtures of diethylcarbonate with chlorobenzene. Partial molar volumes, V_i are also evaluated and their values have been extrapolated to zero concentration to obtain the limiting value at infinite dilution, V^o _i . The numerical values of the excess molar volumes for binary mixtures decrease in the order: chlorobenzene > benzene > bromobenzene ≈ toluene > nitrobenzene. The results are explained in terms of dissociation of the self-associated solute molecules and the formation of aggregates between unlike molecules.     

Excess Molar Volumes and Thermal Expansivities of Aqueous Solutions of Dimethylsulfoxide,Tetrahydrofuran and 1,4-Dioxane

Densities, , of the systems water (W) + dimethylsulfoxide (DMSO), W + tetrahydrofuran (THF) and W + 1,4-dioxane (DO) have been determined in the temperature range 303.15-323.15 K. Excess molar volumes, $V_m^E $ , have been found to be negative and large in magnitude. Thermal expansivities, f , and excess thermal expansivities, f E , have been calculated. Densities, excess molar volumes, thermal expansivities and excess thermal expansivities have been plotted against mole fraction of solutes. All these properties have been expressed satisfactorily by appropriate polynomials. Attempt has been made to explain $V_m^E$ in terms of hydrophobic hydration and hydrophilic effect of the solutes.     

Excess Molar Volumes of Binary Mixtures of Propyl Ethanoate with some n-Alkanes at 298.15 K and 308.15 K

Abstract

Excess molar volumes v^E have been measured for the binary liquid mixtures of propyl ethanoate with five n-alkanes (n-hexane, n-heptane, n-octane, n-nonane and n-decane) at 298.15 and 308.15 K, using an Anton Paar densimeter. All the mixtures studied present positive v^E values that increase with the length of the chain of the alkane and with the temperature. The experimental results are compared with the predictions of the Nitta—Chao model.     

氯仿与邻二甲苯、间二甲苯、对二甲苯和乙苯的过量体积

在298．15K下用振动管密度计在全浓度范围内测量了氯仿分别与邻二甲苯、间二甲苯、对二甲苯和乙苯构成二元混合物的过量摩尔体积V^E。这四个二元系的过量摩尔体积V^E值均为正值,其大小顺序为：间二甲苯＞对二甲苯＞邻二甲苯＞乙苯。     

Some Thermodynamic Properties of the Binary Systems of Toluene with Butyl Methacrylate,Allyl Methacrylate,Methacrylic Acid and Vinyl Acetate at 20, 30 and 40 °C

Densities of the binary systems of toluene with butyl methacrylate, allyl methacrylate, methacrylic acid, and vinyl acetate have been measured as a function of composition at 20, 30 and 40 °C at atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The excess molar volumes are negative for the system toluene + butyl methacrylate and positive for the three other binaries, and become more so as the temperature increases from 20 to 40 °C. The system toluene + allyl methacrylate presents near ideal behavior. The apparent volumes were used to calculate values of the partial excess molar volumes at infinite dilution. The excess coefficient of thermal expansion is positive for the four binary systems. The calculated excess molar volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. An explanation of the results is given based by the FT-IR (ATR) and ¹³C NMR spectra of equimolar mixtures of the different systems.     

Volumetric Properties of the Binary Systems of Dimethyl Sulfoxide with Methacrylic Acid,Vinyl Acetate,Butyl Methacrylate,and Allyl Methacrylate at 298.15 K

Densities of the binary systems of dimethyl sulfoxide with methacrylic acid, vinyl acetate, butyl methacrylate, and allyl methacrylate have been measured as a function of the composition, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess molar volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess molar volumes are negative for the four binary systems, probably as a result of the large dipole moment of the solvent, and become smaller as the monomer becomes more branched or longer. Methacrylic acid exhibits substantially larger negative excess molar volumes, probably due to hydrogen bonding with the solvent. The system dimethyl sulfoxide with butyl methacrylate presents near ideal behavior.     

Volumetric Properties of the Ternary System 1,4-Dioxane + Butyl Acrylate + Ethyl Acrylate and Its Binary Butyl Acrylate + Ethyl Acrylate at 298.15 K

Densities of the ternary system 1,4-dioxane + butyl acrylate + ethyl acrylate and its binary butyl acrylate + ethyl acrylate have been measured in the whole composition range, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess molar volumes of the binary system are positive and were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. Several models were used to correlate the ternary behavior from the excess molar volume data of their constituent binaries and were found equally good to fit the data. The best fit was based on a direct approach, without information on the component binary systems.     

Excess Molar Volume of Binary Mixtures of Methylheptenone+Alkanols at 298.15 K

IntroductionMethylheptenone(CA Registry No. 1 1 0 - 93 -0 ) ,6 - methyl- 5 - hepten- 2 - one,one of theintermediates of isomethpetene synthesis,is atransparent liquid with a strong odor.A survey ofthe literatures shows that there are very fewreports upon the density measurements on thebinary mixtures of MHO and one of alkanols. Tounderstand the nature of MHO and the molecularinteractions between the components of the mixturefurther,the experimental determination on VE isindispensable.The …     

Molar and Partial Molar Excess Volumes of Benzene in Methyl Ester Solutions at 25°C

Molar and partial molar excess volumes of mixtures of benzene with several methyl esters (from methanoate to decanoate) were determined, over the whole concentration range, at 25°C and atmospheric pressure from experimental densities and correlated by a suitable equation. The applicability of the Flory and Priggogine–Flory–Pattersort models for predicting molar excess volumes is tested. The calculated values with Flory and Priggogine–Flory–Patterson are similar and agree poorly with the experimental data.     

Penultimate Propagation Kinetics of Butyl Methacrylate,Butyl Acrylate,and Styrene Terpolymerization

The pulsed‐laser polymerization technique is used to determine the composition‐averaged free‐radical propagation rate coefficient (k_p,ter) for terpolymerization of butyl methacrylate, butyl acrylate, and styrene between 60 and 120 °C. A significant deviation from terminal model predictions is observed for the ternary system, indicating that penultimate kinetics are important at these industrially relevant temperatures. The implicit penultimate propagation model, with all the coefficients taken from previous studies of the binary systems, provides a good prediction of the experimental k_p,ter results.

     

Liquid Densities and Excess Molar Volumes for Binary Systems (Ionic Liquids + Methanol or Water) at 298.15, 303.15 and 313.15 K,and at Atmospheric Pressure

Binary excess molar volumes, V _m ^E, have been evaluated from density measurements, using a vibrating tube densimeter over the entire composition range for binary liquid mixtures of ionic liquids 1-ethyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-butyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [BMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-methyl-3-octyl-imidazolium diethyleneglycol monomethylethersulphate [MOIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+methanol and [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+water at 298.15, 303.15 and 313.15 K. The V _m ^E values were found to be negative for all systems studied. The V _m ^E results are explained in terms of intermolecular interactions and packing effects. The experimental data were fitted by the Redlich-Kister polynomial.     

Excess Molar Volumes and Partial Molar Volumes for Binary Mixtures of Water With 1,2-Ethanediol, 1,2-Propanediol,and 1,2-Butanediol at 293.15, 303.15 and 313.15 K

Abstract

From dilatometric method at 293.15,303,15, and 313.15K for binary mixtures of water and 1,2-alkane diols, the excess molar volumes, V^E and the partial molar volumes, V _i of both components at 293.15 K have been obtained as a function of mixtures composition. Excess molar volumes were calculated and correlated by a Redlich-Kister type function in terms of mole fraction. The partial molar volumes have been extrapolated to zero concentration to obtain the limiting values at infinite dilution, V ⁰ _i . All mixtures showed negative values and decreases with the chain length of diols. The values become less negative with increasing temperature. The results are explained in terms of dissociation of the self-associated diol molecules and the formation of aggregates between unlike molecules.     

Temperature Dependence of Excess Molar Volumes of Ethanol + Water + Ethyl Acetate

In order to design and optimize equipment needed for production of distilled alcoholic beverages, an adequate knowledge of their physical properties and phase equilibria is necessary. The key thermodynamic information needed is for those chemicals that are the main components in terms of nonideal behavior. In this paper we present the temperature dependence of the excess molar volumes of the ternary system ethanol + water + ethyl acetate in the range 288.15–323.15 K at atmospheric pressure, due to the importance of ethyl acetate among the flavor compounds contained in this type of beverage. The observed excess molar volumes are usually negative over the whole homogeneous composition range, but take on positive values as the binary ethanol + ethyl acetate system is approached and the liquid phase separation region is observed. Because the current process designs are strongly computer oriented, the accuracy of theoretical model predictions was examined. The experimental data were used to test the capability of the Soave–Redlich–Kwong (SRK) equation of state to predict the ternary mixture behavior from binary mixture interaction parameters, which were obtained from previously published data. Derived properties, such as partial the excess molar volumes, excess isobaric expansibility, and the pressure derivative of excess molar enthalpy at constant temperature were calculated, due to their importance in the study of specific molecular interactions.