Substituent effects and the mechanism of alkene metathesis catalyzed by ruthenium dichloride catalysts

Density functional theory calculations are reported concerning the dissociative mechanism for alkene metathesis by ruthenium dichloride catalysts, including both bisphosphine and diaminocarbene/phosphine complexes. The calculations use a hierarchy of models, ranging from [(L)(PH(3))Ru(Cl)(2)(CH(2))](L=PH(3) or diaminocarbene) through the larger [(L)(PMe(3))Ru(Cl)(2)(CHPh)] to the "real"[(L)(PCy(3))Ru(Cl)(2)(CHPh)]. Calculations show that the rate-limiting step for metathesis is either ring closing from an alkene complex to form a ruthena-cyclobutane, or ring-opening of the latter intermediate to form an isomeric alkene complex. The higher efficiency of the diaminocarbene based catalysts is due to the stabilization of the formal +iv oxidation state of the ruthenium centre in the metallacycle. This effect is partly masked in the smaller model systems due to a previously unnoticed stereoelectronic effect. The calculations do not reproduce the experimental observation whereby the initiation step, phosphine dissociation, is more energetically demanding and hence slower for the diaminocarbene-containing catalyst system than for the bisphosphine. Further calculations on the corresponding bond energies using a variety of DFT and hybrid DFT/molecular mechanics methods all find instead a larger phosphine dissociation energy for the bisphosphine catalyst. This reversed order of binding energies would in fact be the one expected based on the stronger trans influence of the diaminocarbene ligand. The discrepancy with experiment is small and could have a number of causes which are discussed here.     

Olefin ring closing metathesis and hydrosilylation reaction in aqueous medium by Grubbs second generation ruthenium catalyst

The Grubbs second generation ruthenium catalyst was shown to catalyze various olefin ring closing metathesis and hydrosilylation reactions in aqueous medium. Reactions proceeded in pure water without any additives or cosolvents, in a short period of time. We found that inhomogeneity of the reaction mixture does not prevent high conversion (70-95%) of the products in both reactions.     

Decomposition of ruthenium olefin metathesis catalysts

The decomposition of a series of ruthenium metathesis catalysts has been examined using methylidene species as model complexes. All of the phosphine-containing methylidene complexes decomposed to generate methylphosphonium salts, and their decomposition routes followed first-order kinetics. The formation of these salts in high conversion, coupled with the observed kinetic behavior for this reaction, suggests that the major decomposition pathway involves nucleophilic attack of a dissociated phosphine on the methylidene carbon. This mechanism also is consistent with decomposition observed in the presence of ethylene as a model olefin substrate. The decomposition of phosphine-free catalyst (H2IMes)(Cl)2Ru=CH(2-C6H4-O-i-Pr) (H2IMes = 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene) with ethylene was found to generate unidentified ruthenium hydride species. The novel ruthenium complex (H2IMes)(pyridine)3(Cl)2Ru, which was generated during the synthetic attempts to prepare the highly unstable pyridine-based methylidene complex (H2IMes)(pyridine)2(Cl)2Ru=CH2, is also reported.     

Gas-phase thermochemistry of ruthenium carbene metathesis catalysts

Quantitative energy-resolved collision-induced dissociation cross-sections by tandem ESI-MS provide absolute thermochemical data for phosphine binding energies in first- and second-generation ruthenium metathesis catalysts of 33.4 and 36.9 kcal/mol, respectively. Furthermore a study of the ring-closing metathesis in the second-generation system to liberate norbornene by forming the 14-electron reactive intermediate from the intramolecular pi-complex gives an estimate of the olefin binding energy to the 14-electron complex of around 18 kcal/mol, assuming a loose transition state. The results reported here are in remarkably good agreement with the latest DFT calculations using the M06-L functional.     

Highly selective ruthenium metathesis catalysts for ethenolysis

N-Aryl,N-alkyl N-heterocyclic carbene (NHC) ruthenium metathesis catalysts are highly selective toward the ethenolysis of methyl oleate, giving selectivity as high as 95% for the kinetic ethenolysis products over the thermodynamic self-metathesis products. The examples described herein represent some of the most selective NHC-based ruthenium catalysts for ethenolysis reactions to date. Furthermore, many of these catalysts show unusual preference and stability toward propagation as a methylidene species and provide good yields and turnover numbers at relatively low catalyst loading (<500 ppm). A catalyst comparison showed that ruthenium complexes bearing sterically hindered NHC substituents afforded greater selectivity and stability and exhibited longer catalyst lifetime during reactions. Comparative analysis of the catalyst preference for kinetic versus thermodynamic product formation was achieved via evaluation of their steady-state conversion in the cross-metathesis reaction of terminal olefins. These results coincided with the observed ethenolysis selectivities, in which the more selective catalysts reach a steady state characterized by lower conversion to cross-metathesis products compared to less selective catalysts, which show higher conversion to cross-metathesis products.     

Chelated ruthenium catalysts for Z-selective olefin metathesis

We report the development of ruthenium-based metathesis catalysts with chelating N-heterocyclic carbene (NHC) ligands that catalyze highly Z-selective olefin metathesis. A very simple and convenient procedure for the synthesis of such catalysts has been developed. Intramolecular C-H bond activation of the NHC ligand, promoted by anion ligand substitution, forms the appropriate chelate for stereocontrolled olefin metathesis.     

Improved ruthenium catalysts for Z-selective olefin metathesis

Several new C-H-activated ruthenium catalysts for Z-selective olefin metathesis have been synthesized. Both the carboxylate ligand and the aryl group of the N-heterocyclic carbene have been altered and the resulting catalysts evaluated using a range of metathesis reactions. Substitution of bidentate with monodentate X-type ligands led to a severe attenuation of metathesis activity and selectivity, while minor differences were observed between bidentate ligands within the same family (e.g., carboxylates). The use of nitrato-type ligands in place of carboxylates afforded a significant improvement in metathesis activity and selectivity. With these catalysts, turnover numbers approaching 1000 were possible for a variety of cross-metathesis reactions, including the synthesis of industrially relevant products.     

Cis-selective ring-opening metathesis polymerization with ruthenium catalysts

Cis-selective ring-opening metathesis polymerization of several monocyclic alkenes as well as norbornene and oxanorbornene-type monomers using a C-H activated, ruthenium-based metathesis catalyst is reported. The cis content of the isolated polymers depended heavily on the monomer structure and temperature. A cis content as high as 96% could be obtained by lowering the temperature of the polymerization.     

Decomposition pathways of Z-selective ruthenium metathesis catalysts

The decomposition of a Z-selective ruthenium metathesis catalyst and structurally similar analogues has been investigated utilizing X-ray crystallography and density functional theory. Isolated X-ray crystal structures suggest that recently reported C-H activated catalysts undergo decomposition via insertion of the alkylidene moiety into the chelating ruthenium-carbon bond followed by hydride elimination, which is supported by theoretical calculations. The resulting ruthenium hydride intermediates have been implicated in previously observed olefin migration, and thus lead to unwanted byproducts in cross metathesis reactions. Preventing these decomposition modes will be essential in the design of more active and selective Z-selective catalysts.     

Olefin metathesis in room temperature ionic liquids using imidazolium-tagged ruthenium complexes

New recyclable imidazolium-tagged ruthenium catalysts have been developed to perform olefin metathesis in room temperature ionic liquids (RTILs). High level of recyclability combined with a high reactivity were obtained in the ring-closing metathesis (RCM) of a variety of di- or tri-substituted and/or oxygen-containing dienes. Extremely low residual ruthenium levels were detected in the RCM products (average of 7.3 ppm per run). Several examples of olefin cross-metathesis (CM) have been also studied.     

Quinones synthesis via hydrogen peroxide oxidation of dihydroxy arenes catalyzed by homogeneous and macroporous-polymer-supported ruthenium catalysts

Ruthenium(II)/dimethyl phenyloxazoline (Ru(II)/dm-Pheox) complex 2a and its macroporous-polymeric-catalyst 4 were found to be very rapid and efficient catalysts in the hydrogen peroxide oxidation of 1,2- and 1,4-dihydroxy arenes. Most of the quinone products were delivered in 99% yield. The polymeric-catalyst 4 could be reused at least five times.     

Olefin metathesis: what have we learned about homogeneous and heterogeneous catalysts from surface organometallic chemistry?

Since its early days, olefin metathesis has been in the focus of scientific discussions and technology development. While heterogeneous olefin metathesis catalysts based on supported group 6 metal oxides have been used for decades in the petrochemical industry, detailed mechanistic studies and the development of molecular organometallic chemistry have led to the development of robust and widely used homogeneous catalysts based on well-defined alkylidenes that have found applications for the synthesis of fine and bulk chemicals and are also used in the polymer industry. The development of the chemistry of high-oxidation group 5–7 alkylidenes and the use of surface organometallic chemistry (SOMC) principles unlocked the preparation of so-called well-defined supported olefin metathesis catalysts. The high activity and stability (often superior to their molecular analogues) and molecular-level characterisation of these systems, that were first reported in 2001, opened the possibility for the first direct structure–activity relationships for supported metathesis catalysts. This review describes first the history of SOMC in the field of olefin metathesis, and then focuses on what has happened since 2007, the date of our last comprehensive reviews in this field.

Surface organometallic chemistry bridges the gap between homogeneous and heterogeneous olefin metathesis catalysts.     

Olefin isomerization reactions catalyzed by ruthenium hydrides bearing Schiff base ligands

A series of in situ‐generated ruthenium hydride complexes Ru(PPh₃)₂(CO)H(Lⁿ) (n = a – h ) incorporating a Schiff base ligand was investigated for the isomerization of olefins. ¹H‐NMR was used to characterize the new hydride species in combination with ³¹P‐NMR. Allylbenzene and 1‐octene were used as model substrates. Temperature, solvents and catalyst/substrate mole ratio were taken into account as parameters to optimize the isomerization reaction. All catalysts showed the best performance in 2‐butanol, suggesting that the catalytic activity depends not only strongly on the steric and electronic environment of the ruthenium but also on the chosen solvent. Copyright © 2011 John Wiley & Sons, Ltd.     

Phosphine-mediated disulfide metathesis in aqueous media

Dynamic carbohydrate systems have been efficiently generated through phosphine-mediated disulfide metathesis in aqueous media. The protein compatibility and binding features of the dynamic systems were demonstrated in situ using (1)H STD NMR.     

Olefin metathesis featuring ruthenium indenylidene complexes with a sterically demanding NHC ligand

The synthesis and characterization of two new ruthenium indenylidene complexes [RuCl(2)(SIPr)(Py)(Ind)] 6 and [RuCl(2)(SIPr)(3-BrPy)(Ind)] 7 featuring the sterically demanding N-heterocyclic carbene 1,3-bis(2,6-di isopropylphenyl)-4,5-dihydroimidazol-2-ylidene (SIPr) are reported. Remarkable activity was observed with these complexes in ring closing, enyne, and cross metathesis of olefins at low catalyst loadings. The performance of SIPr-bearing complexes 6 and 7 as well as [RuCl(2)(SIPr)(PCy(3))(Ind)] 5 in ring opening metathesis polymerization is also disclosed. This work highlights the enormous influence of the neutral "spectator" ligands on catalyst activity and stability.