On the Tacticity of Polynorbornenes with 5,6‐endo Pendant Groups That Contain Substituted Aryl Chromophores

Two dimers and a series of polymers with 5,6‐endo pendant aryl groups that contain different substituents at the para positions were synthesized. The conformation and stereochemistry of the dimers and polymers were determined by nonlinear optical analysis (EFISH) as well as UV/Vis and ¹³C NMR spectroscopy. The chemical shifts of C7 for the polymers appeared as two peaks in the ¹³C NMR spectra when the substituents are electron‐withdrawing groups. The percentage decrease in the relative extinction coefficient of the polymers, ε_d, was linearly related to the Hammett constant σ. Polynorbornenes with electron‐withdrawing substituents may adopt isotactic stereochemistry with all pendant groups aligned in one direction. The nature of the interactions between neighboring chromophores may be one of the most important factors in directing the stereoregularity and conformation of these polymers. The corresponding polymers derived from the exo isomers appeared to be less stereoregular.     

Crosslinked polynorbornene particles synthesis by ring‐opening metathesis polymerization in dispersion

This article proposes the first report on the synthesis of nanometric crosslinked polynorbornene particles by ring‐opening metathesis polymerization in dispersion using ruthenium‐based complex (PCy₃)₂Cl₂Ru?CHPh as initiator. Stable but raspberry‐shaped particles were obtained. In this study, a particular attention was paid to the influence of the crosslinker nature and addition mode on reaction kinetics and morphology of the latex particles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Water‐soluble polymers from acid‐functionalized norbornenes

Unprotected exo,exo‐5‐norbornene‐2,3‐dicarboxylic acid and exo,exo‐7‐oxa‐5‐norbornene‐2,3‐dicarboxylic acid were polymerized via ring‐opening metathesis polymerization. This reaction yielded polymers with molecular weights (M_n from GPC) ranging from 31 to 242 kg/mol and polydispersity indices between 1.05 and 1.12, using Grubbs' third generation catalyst. The water solubility as a function of pH value of the polymers was investigated by dynamic light scattering (DLS). DLS and acid‐base titration revealed that the oxanorbornene polymer was water soluble over a wider pH range than its norbornene analog. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1266–1273, 2009     

Synthesis and Characterization of Novel Glycerol‐Derived Polycarbonates with Pendant Hydroxyl Groups

Summary: A novel type of glycerol‐derived, water‐soluble polycarbonate with pendant, primary hydroxyl groups was prepared from 2‐(2‐benzyloxyethoxy)trimethylene carbonate (BETC). Ring‐opening polymerization of BETC and 2,2‐dimethyltrimethylene carbonate (DTC) gave narrow distribution of homopolymers or random copolymers with high molecular weights. The protecting benzyl groups were removed by catalyzed hydrogenation at atmosphere H₂ pressure to give hydroxyl polycarbonates without observable changes on the polymer backbone and molecular weight distribution. The hydrophilicity of the copolymers increases with the increase in the hydrophilic glycerol‐derived carbonate content.

Synthesis of the glycerol‐derived polycarbonate.     

Ring‐opening metathesis polymerization of amino acid‐functionalized norbornene derivatives

Amino acid‐derived novel norbornene derivatives, N,N′‐(endo‐bicyclo[2.2.1] hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐alanine methyl ester (NBA), N,N′‐(endo‐bicyclo[2.2.1]hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐leucine methyl ester (NBL), N,N′‐(endo‐bicyclo[2.2.1]hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐phenylalanine methyl ester (NBF) were synthesized and polymerized using the Grubbs 2nd generation ruthenium (Ru) catalyst. Although NBA, NBL, and NBF did not undergo homopolymerization, they underwent copolymerization with norbornene (NB) to give the copolymers with M_n ranging from 5200 to 38,100. The maximum incorporation ratio of the amino acid‐based unit was 9%, and the cis contents of the main chain were 54–66%. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5337–5343, 2006     

A Water‐Soluble Polycarbonate With Dimethylamino Pendant Groups Prepared by Enzyme‐Catalyzed Ring‐Opening Polymerization

A water‐soluble polycarbonate with dimethylamino pendant groups, poly(2‐dimethylaminotrimethylene carbonate) (PDMATC), is synthesized and characterized. First, the six‐membered carbonate monomer, 2‐dimethylaminotrimethylene carbonate (DMATC), is prepared via the cyclization reaction of 2‐(dimethylamino)propane‐1,3‐diol with triphosgene in the presence of triethylamine. Although the attempted ring‐opening polymerization (ROP) of DMATC with Sn(Oct)₂ as a catalyst fails, the ROP of DMATC is successfully carried out with Novozym‐435 as a catalyst to give water‐soluble aliphatic polycarbonate PDMATC with low cytotoxicity and good degradability.     

Latent Olefin Metathesis Catalysts for Polymerization of DCPD

Summary: Advances in design of latent ruthenium phenylindenylidene catalysts bearing salicylaldimine ligands for ring-opening metathesis polymerization are described. The presence of the substituents in ortho position in N-aryl ring of salicylaldimine ligand has been found to be the main factor determining the catalyst stability. The best of the studied catalysts after acid activation offers activity comparable to that of the dichloride systems in ring-opening metathesis polymerization of DCPD, while maintaining very high stability in the monomer solution.     

Novel Photoresponsive Linear,Graft, and Comb‐Like Copolymers with Azobenzene Chromophores in the Main‐Chain and/or Side‐Chain: Facile One‐Pot Synthesis and Photoresponse Properties

Novel photoresponsive linear, graft, and comb‐like copolymers with azobenzene chromophores in the main‐chain and/or side‐chain are prepared via a sequential ring‐opening metathesis polymerization (ROMP) and head‐to‐tail acyclic diene metathesis (ADMET) polymerization in a one‐pot procedure using Grubbs ruthenium‐based catalysts. The diluted solutions of these as‐prepared copolymers containing azobenzene chromophores exhibit photochemical trans–cis isomerization under the irradiation of UV light, followed by their cis–trans back‐isomerization in visible light. The rates of photoisomerization are found to be slower than those of back‐isomerization, and the rate for the comb‐like copolymer is found to be from 3 to 7 times slower than that obtained for the linear or graft copolymer. This is ascribed to the differences in structure of the copolymers and the specific location of azobenzene chromophores in the copolymer, which favor a side‐chain graft structure.

     

Water soluble poly(ethylene oxide) functionalized norbornene polymers

The synthesis of three different poly(ethylene oxide) macromonomers with a norbornene and oxanorbornene end group is presented. The macromonomers were polymerized to comb‐polymers by ring‐opening metathesis polymerization (ROMP) using Grubbs' Catalyst G3 to produce water soluble polymers with polydispersities between 1.04 and 1.30 and molecular weights between 14,000 and 50,000 g/mol. Characterization by static and dynamic light scattering reveals that the comb‐polymers with norbornene backbone are molecularly disperse in aqueous solution, while the oxanorbornene‐backbone polymers form small water‐soluble aggregates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2640–2648, 2008     

Novel Highly Active Niobium Catalysts for Ring Opening Metathesis Polymerization of Norbornene

Ring‐opening metathesis polymerization (ROMP) of norbornene catalyzed by niobium(V) N,N‐dialkylcarbamates Nb(O₂CNR₂)₅, R = Et ( 1 ), Me ( 2 ) was studied in the presence of methylaluminoxane (MAO) as a cocatalyst. These novel catalytic systems resulted very active in chlorobenzene: 1 in the presence of methylaluminoxane catalyzes the ROMP of norbornene with the highest activity (29 000 kg of polymer/mol of catalyst × hour) never reported up to now for niobium catalysts. The high productivity appears particularly attractive considering that these precursors are rather cheap and easy to synthesize and to handle. Polynorbornenes were characterized by FT‐IR and NMR spectroscopies and by DSC calorimetry. A new FT‐IR method for the swift determination of the cis/trans content of the polymer is presented.

     

Synthesis and characterization of the ring-opened copolymers of deltacyclene, 5-siloxydeltacyclene,and norbornene

The ring-opening metathesis copolymerizations of deltacyclene, substituted deltacyclene, and norbornene was achieved using RuCl₃, ReCl₅, and molybdenum alkylidene catalysts. The reaction conditions employed are similar to those used previously in the syntheses of homopolymers. The low conversion copolymerization of deltacyclene and norbornene showed that deltacyclene is more reactive than norbornene by a factor of 2.4. The characterization and physical properties of these copolymers were determined using NMR, GPC, T_g, and viscosity measurements. © 1993 John Wiley & Sons, Inc.     

Optical response of phenantroimidazole-dyes covalently linked to a polynorbornene-backbone to acid and base

Two norbornene derivatives bearing phenantroimidazole dyes, namely endo/exo-11-(4-(1H-phenanthro[9,10-d]imidazol-2-yl)phenoxy) undecylbicyclo[2.2.1] hept-5-ene-2-carboxylat (5) and 11-(4-(1-Methyl-1H-phenanthro[9,10-d]imidazol-2-yl)phenoxy) undecylbicyclo[2.2.1]hept-5-ene-2-carboxylate (6) were synthesized. 5 and 6 were used to prepare statistical copolymers with endo,exo-bicyclo[2.2.1.]hept-2-ene-5,6-dicarboxylic acid dimethylester (7) via ring opening metathesis polymerization. The photophysical properties of the monomers and polymers and to what extent polymerization and substitution patterns influence the photophysical properties were investigated. Furthermore, the optical response upon addition of acid was investigated. The emission of monomer 5 shows a small bathochromic shift of 13 nm upon protonation while the emission of the resultant polymer poly5/7 exhibits a large red shift of 62 nm. In contrast, the according methylated monomer 6 and the resulting polymer poly6/7 gave similar absorption and emission characteristics. The differences were attributed to an increased tendency of the non-methylated dyes to interact when brought in close proximity in the polymer.     

Phenylenevinylene Block Copolymers via Ring‐Opening Metathesis Polymerization

Fully conjugated block copolymers containing 1,4‐ and 1,3‐phenylenevinylene repeating units can be prepared by the sequential ring opening metathesis polymerization of strained cyclophanedienes, initiated by ruthenium carbene complexes (Grubbs metathesis catalysts). The molecular weight of the constituent blocks can be tightly controlled by changing the catalyst to monomer ratio and the volume fraction of the block copolymers independently tailored by the ratio of the monomers employed. Extensive phase separation between the constituent blocks is observed in thin films of these polymers by atomic force microscopy and efficient energy transfer between blocks containing 1,4‐ and 1,3‐phenylenevinylene units can be seen in the photoluminescence of these materials.

     

Cationic ring‐opening polymerization of monothiocarbonate with a norbornene group

This work deals with the cationic ring‐opening polymerization of cyclic thiocarbonates with a norbornene or norbornane moiety, that is, 5,5‐(bicyclo[2.2.1]hept‐2‐ene‐5,5‐ylidene)‐1,3‐dioxane‐2‐thione ( TC1 ) or 5,5‐(bicyclo[2.2.1]heptane‐5,5‐ylidene)‐1,3‐dioxane‐2‐thione ( TC2 ), respectively. The reaction of TC1 initiated by trifluoromethanesulfonic acid (TfOH), methyl trifluoromethanesulfonate (TfOMe), boron trifluoride etherate (BF₃OEt₂), or triethyloxonium tetrafluoroborate (Et₃OBF₄) afforded unidentified products; however, TC1 underwent cationic ring‐opening polymerization with methyl iodide as an initiator to afford polythiocarbonate because the propagating end was stabilized by the covalent‐bonding property. The polymerization of TC2 initiated by TfOH, TfOMe, BF₃OEt₂, or Et₃OBF₄ afforded polythiocarbonate with good solubility in common organic solvents and a narrow molecular weight distribution because of the absence of a double‐bond moiety. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1698–1705, 2002