α‐Halogenoacetanilides as Hydrogen‐Bonding Organocatalysts that Activate Carbonyl Bonds: Fluorine versus Chlorine and Bromine

α‐Halogenoacetanilides (X=F, Cl, Br) were examined as H‐bonding organocatalysts designed for the double activation of C?O bonds through NH and CH donor groups. Depending on the halide substituents, the double H‐bond involved a nonconventional C?H???O interaction with either a H?CX_n (n=1–2, X=Cl, Br) or a H?C_Ar bond (X=F), as shown in the solid‐state crystal structures and by molecular modeling. In addition, the catalytic properties of α‐halogenoacetanilides were evaluated in the ring‐opening polymerization of lactide, in the presence of a tertiary amine as cocatalyst. The α‐dichloro‐ and α‐dibromoacetanilides containing electron‐deficient aromatic groups afforded the most attractive double H‐bonding properties towards C?O bonds, with a N?H???O???H?CX₂ interaction.     

A Series of Isolable Silanoic Thio‐, Seleno‐, and Telluroesters (LSi(X)OR) with Donor‐Supported SiX Double Bonds (L=β‐Diketiminate; X=S,Se, Te)

The first silicon analogues of carbonic (carboxylic) esters, the silanoic thio‐, seleno‐, and tellurosilylesters 3 (Si?S), 4 (Si?Se), and 5 (Si?Te), were prepared and isolated in crystalline form in high yield. These thermally robust compounds are easily accessible by direct reaction of the stable siloxysilylene L(Si:)OSi(H)L′ 2 (L=HC(CMe)₂[N(aryl)₂], L′=CH[(C?CH₂)‐CMe][N(aryl)]₂; aryl=2,6‐iPr₂C₆H₃) with the respective elemental chalcogen. The novel compounds were fully characterized by methods including multinuclear NMR spectroscopy and single‐crystal X‐ray diffraction analysis. Owing to intramolecular N→Si donor–acceptor support of the Si?X moieties (X=S, Se, Te), these compounds have a classical valence‐bond N⁺–Si–X^? resonance betaine structure. At the same time, they also display a relatively strong nonclassical Si?X π‐bonding interaction between the chalcogen lone‐pair electrons (n_π donor orbitals) and two antibonding Si? N orbitals (σ*_π acceptor orbitals mainly located at silicon), which was shown by IR and UV/Vis spectroscopy. Accordingly, the Si?X bonds in the chalcogenoesters are 7.4 ( 3 ), 6.7 ( 4 ), and 6.9 % ( 5 ) shorter than the corresponding Si? X single bonds and, thus, only a little longer than those in electronically less disturbed Si?X systems (“heavier” ketones).     

Sol–gel derived Si/C/O/N‐materials: molecular model compounds,xerogels and porous ceramics

Polymeric Si/C/O/N xerogels, with the idealized polymer network structure comprising [Si O Si(NCN)₃]_n moieties, were prepared by reactions of hexachlorodisiloxane (Cl₃Si O SiCl₃) with bis(trimethylsilyl)carbodiimide (Me₃Si NCN SiMe₃, BTSC). NMR and FTIR spectra indicate the existence of ‐NCN‐ and Si O Si‐ units in the xerogels and also in the ceramic materials obtained upon pyrolysis. The feasibility of this reaction protocol was confirmed on the molecular level by the deliberate synthesis of the macrocyclic compound [SiPh₂ O SiPh₂(NCN)]₂, the crystal structure and spectroscopic data of which are reported. The influence of pyridine as a catalyst for the cross‐linking reaction was studied. The degree of cross‐linking increased within the polymers with the addition of pyridine. It was shown by the reaction of hexachlorodisiloxane with excess pyridine that the latter appears to activate only one out of the two ‐SiCl₃ moieties under formation of hexacoordinated silicon compounds. The crystal structure of Cl₃Si O SiCl₃(pyridine)₂ is presented. Quantum chemical calculations are in support of this adduct being a potential intermediate in the pyridine catalyzed sol–gel process. The ceramic yield after pyrolysis of the Si/C/O/N‐xerogels at 1000 °C, which reaches values up to 50%, was found to depend on the aging protocol (time, temperature), whereas no correlation was found with the amount of pyridine added for xerogel synthesis. The Si/C/N/O‐ceramics obtained after pyrolysis at 1000 °C under NH₃ are completely amorphous. Chemically they have to be considered as hybrids between an ideal [SiOSi(NCN)₃]_n network and glass‐like Si₂N₂O. The products are mesoporous with closed pores and a broad pore size distribution. Copyright © 2011 John Wiley & Sons, Ltd.     

Solid‐State Form Screen of Cardiosulfa and Its Analogues

Cardiosulfa is a biologically active sulfonamide molecule that was recently shown to induce abnormal heart development in zebrafish embryos through activation of the aryl hydrocarbon receptor (AhR). The present report is a systematic study of solid‐state forms of cardiosulfa and its biologically active analogues that belong to the N‐(9‐ethyl‐9H‐carbazol‐3‐yl)benzene sulfonamide skeleton. Cardiosulfa (molecule 1 ; R¹=NO₂, R²=H, R³=CF₃), molecule 2 (H, H, CF₃), molecule 3 (CF₃, H, H), molecule 4 (NO₂, H, H), molecule 5 (H, CF₃, H), and molecule 6 (H, H, H) were synthesized and subjected to a polymorph search and solid‐state form characterization by X‐ray diffraction, differential scanning calorimetry (DSC), variable‐temperature powder X‐ray diffraction (VT‐PXRD), FTIR, and solid‐state (ss) NMR spectroscopy. Molecule 1 was obtained in a single‐crystalline modification that is sustained by N? H???π and C? H???O interactions but devoid of strong intermolecular N? H???O hydrogen bonds. Molecule 2 displayed a N? H???O catemer C(4) chain in form I, whereas a second polymorph was characterized by PXRD. The dimorphs of molecule 3 contain N? H???π and C? H???O interactions but no N? H???O bonds. Molecule 4 is trimorphic with N? H???O catemer in form I, and N? H???π and C? H???O interactions in form II, and a third polymorph was characterized by PXRD. Both polymorphs of molecule 5 contain the N? H???O catemer C(4) chain, whereas the sulfonamide N? H???O dimer synthon R₂²(8) was observed in polymorphs of 6 . Differences in the strong and weak hydrogen‐bond motifs were correlated with the substituent groups, and the solubility and dissolution rates were correlated with the conformation in the crystal structure of 1 , 2 , 3 , 4 , 5 , 6 . Higher solubility compounds, such as 2 (10.5 mg mL^?1) and 5 (4.4 mg mL^?1), adopt a twisted confirmation, whereas less‐soluble 1 (0.9 mg mL^?1) is nearly planar. This study provides practical guides for functional‐group modification of drug lead compounds for solubility optimization.     

Amorphous Silicon: New Insights into an Old Material

Amorphous silicon is synthesized by treating the tetrahalosilanes SiX₄ (X=Cl, F) with molten sodium in high boiling polar and non‐polar solvents such as diglyme or nonane to give a brown or a black solid showing different reactivities towards suitable reagents. With regards to their technical relevance, their stability towards oxygen, air, moisture, chlorine‐containing reaction partners RCl (R=H, Cl, Me) and alcohols is investigated. In particular, reactions with methanol are a versatile tool to deliver important products. Besides tetramethoxysilane formation, methanolysis of silicon releases hydrogen gas under ambient conditions and is thus suitable for a decentralized hydrogen production; competitive insertion into the MeO?H versus the Me?OH bond either yields H‐ and/or methyl‐substituted methoxy functional silanes. Moreover, compounds, such as Me_nSi(OMe)_4?n (n=0–3) are simply accessible in more than 75 % yield from thermolysis of, for example, tetramethoxysilane over molten sodium. Based on our systematic investigations we identified reaction conditions to produce the methoxysilanes Me_nSi(OMe)_4?n in excellent (n=0:100 %) to acceptable yields (n=1:51 %; n=2:27 %); the yield of HSi(OMe)₃ is about 85 %. Thus, the methoxysilanes formed might possibly open the door for future routes to silicon‐based products.     

Tautomerism of monochalcogenosilanoic acids CH3Si(O)XH (X = S,Se, Te) in the gas phase and in the polar and aprotic solution: An ab initio computational investigation

Computational investigations by an ab initio molecular orbital method (HF and MP2) with the 6‐311+G(d,p) and 6‐311++G(2df, 2pd) basis sets on the tautomerism of three monochalcogenosilanoic acids CH₃Si(?O)XH (X = S, Se, and Te) in the gas phase and a polar and aprotic solution tetrahydrofuran (THF) was undertaken. Calculated results show that the silanol forms CH₃Si(?X)OH are much more stable than the silanone forms CH₃Si(?O)XH in the gas‐phase, which is different from the monochalcogenocarboxylic acids, where the keto forms CH₃C(?O)XH are dominant. This situation may be attributed to the fact that the Si? O and O? H single bonds in the silanol forms are stronger than the Si? X and X? H single bonds in the silanone forms, respectively, even though the Si?X (X = S, Se, and Te) double bonds are much weaker than the Si?O double bond. These results indicate that the stability of the monochalcogenosilanoic acid tautomers is not determined by the double bond energies, contrary to the earlier explanation based on the incorrect assumption that the Si?S double bond is stronger than the S?O double bond for the tautomeric equilibrium of RSi(?O)SH (R?H, F, Cl, CH₃, OH, NH₂) to shift towards the thione forms [RSi(?S)OH]. The binding with CH₃OCH₃ enhances the preference of the silanol form in the tautomeric equilibrium, and meanwhile significantly lowers the tautomeric barriers by more than 34 kJ/mol in THF solution. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Versatile and Efficient Synthesis of a New Class of Aza‐Based Phosphinic Amide Ligands via Unusual P?C Cleavage

A new class of bidentate, aza‐based phosphinic amide ligands of the type RN(H)P(?O)(2‐py)₂ (2‐py = 2‐pyridyl) was synthesized within minutes via a one‐pot process including Staudinger reaction of an organic azide (RN₃) with 2‐pyridylphosphines, followed by partial, unprecedented hydrolysis under loss of one aromatic substituent. The structure of the unusual‐hydrolysis product H₂C?CH(CH₂)₉N(H)P(?O)(2‐py)₂ ( 5a ) was characterized by IR, ¹H‐ and ³¹P‐NMR, as well as by X‐ray crystal‐structure analysis (Figure). The tetrahedral P‐atom was found to be surrounded by a trigonal‐pyramidal arrangement of the substituents. To gain insight into the formation of these novel phosphinic amides, a series of intermediate iminophosphoranes, H₂C?CH(CH₂)₉N?P(Ar)_n(2‐py)_{3 ? n} (n = 0–3), compounds 1a – 1f , were synthesized, and their hydrolyses were studied. All tested compounds followed the classical hydrolysis route of P?N cleavage under acidic conditions. Sequential hydrolysis to 5a – 5d only occurred under either basic conditions or in wet MeCN as solvent. Notably, H₂C?CH(CH₂)₉N?P(C₆H₅)(4‐MeO‐2‐py)₂ ( 1c ) was hydrolyzed at a much slower rate compared to its analogue 1b lacking the MeO group. On the contrary, the halogenated compounds H₂C?CH(CH₂)₉N?P(4‐X‐C₆H₄)₃ ( 1f,g ) (X = F, Cl) were hydrolyzed at a notably faster rate relative to the non‐halogenated congener 1e (X = H).     

CH Bond Activation during and after the Reactions of a Metallacyclic Amide with Silanes: Formation of a μ‐Alkylidene Hydride Complex,Its H–D Exchange,and β‐H Abstraction by a Hydride Ligand

Metallacyclic complex [(Me₂N)₃Ta(η²‐CH₂SiMe₂NSiMe₃)] ( 3 ) undergoes C?H activation in its reaction with H₃SiPh to afford a Ta/μ‐alkylidene/hydride complex, [(Me₂N)₂{(Me₃Si)₂N}Ta(μ‐H)₂(μ‐C‐η²‐CHSiMe₂NSiMe₃)Ta(NMe₂)₂] ( 4 ). Deuterium‐labeling studies with [D₃]SiPh show H–D exchange between the Ta?D ?Ta unit and all methyl groups in [(Me₂N)₂{(Me₃Si)₂N}Ta(μ‐D)₂(μ‐C‐η²‐CHSiMe₂NSiMe₃)Ta(NMe₂)₂] ([D₂]‐ 4 ) to give the partially deuterated complex [D_n]‐ 4 . In addition, 4 undergoes β‐H abstraction between a hydride and an NMe₂ ligand and forms a new complex [(Me₂N){(Me₃Si)₂N}Ta(μ‐H)(μ‐N‐η²‐C,N‐CH₂NMe)(μ‐C‐η²‐C,N‐CHSiMe₂NSiMe₃)Ta(NMe₂)₂] ( 5 ) with a cyclometalated, η²‐imine ligand. These results indicate that there are two simultaneous processes in [D_n]‐ 4 : 1) H–D exchange through σ‐bond metathesis, and 2) H?D elimination through β‐H abstraction (to give [D_n]‐ 5 ). Both 4 and 5 have been characterized by single‐crystal X‐ray diffraction studies.     

Influence of methyl‐modified silyl groups on the properties of polymers and Si/B/N/C ceramics derived from N‐silylated borazine derivatives

Thermal silazane cleavage of dichloroboryldisilylamines (SiCl_mMe_3?m)N(SiMe₃)(BCl₂) (1: m = 1; 2: m = 2) at 196 °C leads to the borazine derivates [(SiCl_mMe_3?m)NB(Cl_nMe_1?n)]₃ (3: m = 1, n = 0.185; 4: m = 2, n = 0.111) characterized by NMR and IR spectroscopy and mass spectrometry. Single‐crystal X‐ray diffraction structure analyses reveal (BN)₃ units with unusual twisted boat conformations in both compounds. Additionally, more detailed studies are done to clear up the function of the by‐products (SiCl_mMe_3?m)N(SiClMe₂)(BClMe) formed during the cyclization step leading to asymmetrically boron substituted borazine derivatives. The single‐source precursors 3 and 4 were cross‐linked with methylamine producing polymers 3P and 4P, which were transformed into black amorphous materials with ceramic yields of 20.8 % and 50.3 %, respectively. Ceramic 4C (Si_1.00B_0.98 N_2.55 C_1.37O_0.05) was further investigated by ¹¹B and ²⁹Si magic angle spinning (MAS) NMR spectroscopy. A combined study of high‐temperature TG analyses and X‐ray powder diffraction analyses confirms the thermal stability of 4C up to 1670 °C. Copyright © 2012 John Wiley & Sons, Ltd.     

Reaktion von Bis(trimethylsilylamino)dichlorsilan mit Titantetrachlorid ‐ Synthese und Kristallstruktur von [μ‐ClTiCl2N(SiMe3)SiCl2NH2]2

TiCl₄ reacts quantitatively with Cl₂Si(NHSiMe₃)₂ in n‐pentane under evolution of Me₃SiCl yielding [μ‐ClTiCl₂N(SiMe₃)‐SiCl₂NH₂]₂ ( 1 ), which is obtained as a yellow, crystalline solid forming small intergrown needles, that rapidly hydrolyse. The product 1 shows a thermal stability up to 80?C. The molecular structure of 1 has been solved by X‐ray powder diffraction methods and it could be confirmed by single‐crystal X‐ray structure determination at ‐70 ?C. Accordingly, in the solid 1 is a dimer ([μ‐ClTiCl₂N(SiMe₃)SiCl₂NH₂]₂, P2₁/n (no. 14), Z = 2, a = 1504.89(6), b = 1296.33(6), c = 710.90(4) pm, and β = 91.276(2)?).     

Synthesis of comb‐type polycarbosilanes via nucleophilic substitution reactions on the main‐chain silicon atoms

A series of comb‐type polycarbosilanes of the type [Si(CH₃)(OR)CH₂]_n {where R = (CH₂)_mR′, R′ = ? O‐p‐biphenyl? X [X = H (m = 3, 6, 8, or 11) or CN (m = 11)], and R′ = (CF₂)₇CF₃ (m = 4)} were prepared from poly(chloromethylsilylenemethylene) by reactions with the respective hydroxy‐terminated side chains in the presence of triethylamine. The product side‐chain polymers were typically greater than 90% substituted and, for R′ = ? O‐p‐biphenyl? X derivatives, they exhibited phase transitions between 27 and 150 °C involving both crystalline and liquid‐crystalline phases. The introduction of the polar p‐CN substituent to the biphenyl mesogen resulted in a substantial increase in both the isotropization temperature and the liquid‐crystalline phase range with respect to the corresponding unsubstituted biphenyl derivative. For R = (CH₂)₁₁? O‐biphenyl side chains, an analogous side‐chain liquid‐crystalline (SCLC) polysiloxane derivative of the type [Si(CH₃)(O(CH₂)₁₁? O‐biphenyl)O]_n was prepared by means of a catalytic dehydrogenation reaction. In contrast to the polycarbosilane bearing the same side chain, this polymer did not exhibit any liquid‐crystalline phases but melted directly from a crystalline phase to an isotropic liquid at 94 °C. Similar behavior was observed for the polycarbosilane with a fluorocarbon chain, for which a single transition from a crystalline phase to an isotropic liquid was observed at ?0.7 °C. The molecular structures of these polymers were characterized by means of gel permeation chromatography and high‐resolution NMR studies, and the crystalline and liquid‐crystalline phases of the SCLC polymers were identified by differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 984–997, 2003     

Pyrolytic conversion of an Al?Si?N?C precursor prepared via hydrosilylation between [Me(H)SiNH]4 and [HAlN(allyl)]m[HAlN(ethyl)]n

An iminoalane‐silazane polymer (ISP), an Al? Si? N? C precursor, has been synthesized via Pt‐catalyzed hydrosilylation between poly(allyl iminoalane‐co‐ethyl iminoalane) {[HAlN(allyl)]_m[HAlN (ethyl)]_n, AE‐alane} and 1,3,5,7‐tetrahydro‐1,3,5,7‐tetramethylcyclotetrasilazane {[Me(H)SiNH]₄, TCS}. The IR and ¹H NMR spectra of ISP indicate that the relative amounts of the allyl groups decrease slightly in comparison with those of AE‐alane, suggesting that hydrosilylation occurs partially. TG analysis up to 900 °C reveals that the ceramic yield of ISP is 83.1 mass%. It is suggested that the high ceramic yield can be ascribed to cross‐linking reactions occurring during pyrolysis. Possible reactions during pyrolysis are hydrosilylation, polymerization of the C?C bonds in the allyl groups and dehydrocoupling among the SiH groups, NH groups and AlH groups in ISP. The pyrolyzed residue at 1700 °C contains crystalline AlN, 2H‐SiC, β‐SiC and β‐Si₃N₄ and amorphous carbon, as revealed by solid‐state nuclear magnetic resonance (NMR) spectroscopy, Raman spectroscopy and X‐ray diffraction (XRD) analysis. Copyright © 2006 John Wiley & Sons, Ltd.     

Catalytic activity of Ru/tetrahydropyrimidinium salts system for transfer hydrogenation reactions

New 1,3‐dialkyltetrahydropyrimidinium salts as NHC precursors have been synthesized and characterized. The in situ prepared three‐component 1,3‐dialkyltetrahydropyrimidinium salts/[RuCl₂(p‐cymene)]₂ and KOH catalyzes quantitatively the transfer hydrogenation of ketones under mild reaction conditions in 2‐propanol. Also, the molecular structure of 1,3‐bis(2‐methylbenzyl)‐3,4,5,6‐tetrahydropyrimidinium was determined using single‐crystal X‐ray diffraction. Ions of the title compound are linked by C? H…Cl and O? H…Cl hydrogen bonding interactions. The N? C? N bond angle (124.3(2)°) and C? N bond lengths (1.316(3) and 1.314(3) Å) confirm the existence of strong resonance in this part of the molecule. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis,Interionic Structure,and Reactivity toward CO and p‐Methylstyrene of Palladacyclic Compounds Bearing α‐Diimine Ligands

Palladacyclic compounds [Pd(C₆H₄(C₆H₅C?O)C?N? R)(N? N)] [X] (R = Et, ⁱPr, 2,6‐ⁱPr₂C₆H₃; N? N = bpy = 2,2′‐bipyridine, or 1,4‐(o,o′‐dialkylaryl)‐1,4‐diazabuta‐1,3‐dienes; [X]^? = [BF₄]^? or [PF₆]^?) were synthesized from the dimers [{Pd(C₆H₄(C₆H₅C?O)C?N? R)(μ‐Cl)}₂] and N? N ligands. Their interionic structure in CD₂Cl₂ was determined by means of ¹⁹F,¹H‐HOESY experiments and compared with that in the solid state derived from X‐ray single‐crystal studies. [Pd(C₆H₄(C₆H₅C?O)C?N? R)(N? N)] [X] complexes were found to copolymerize CO and p‐methylstyrene affording syndiotactic or isotactic copolymers when bpy or 1,4‐(o,o′‐dimethylaryl)‐1,4‐diazabuta‐1,3‐dienes were used, respectively. The reactions with CO and p‐methylstyrene of the bpy derivatives were investigated. Two intermediates derived from a single and a double insertion of CO into the Pd? C bonds were isolated and completely characterized in solution.     

The Unexpected Mechanism Underlying the High‐Valent Mono‐Oxo‐Rhenium(V) Hydride Catalyzed Hydrosilylation of CN Functionalities: Insights from a DFT Study

In this study, we theoretically investigated the mechanism underlying the high‐valent mono‐oxo‐rhenium(V) hydride Re(O)HCl₂(PPh₃)₂ ( 1 ) catalyzed hydrosilylation of C?N functionalities. Our results suggest that an ionic S_N2‐Si outer‐sphere pathway involving the heterolytic cleavage of the Si?H bond competes with the hydride pathway involving the C?N bond inserted into the Re?H bond for the rhenium hydride ( 1 ) catalyzed hydrosilylation of the less steric C?N functionalities (phenylmethanimine, PhCH=NH, and N‐phenylbenzylideneimine, PhCH=NPh). The rate‐determining free‐energy barriers for the ionic outer‐sphere pathway are calculated to be ～28.1 and 27.6 kcal mol^?1, respectively. These values are slightly more favorable than those obtained for the hydride pathway (by ～1–3 kcal mol^?1), whereas for the large steric C?N functionality of N,1,1‐tri(phenyl)methanimine (PhCPh=NPh), the ionic outer‐sphere pathway (33.1 kcal mol^?1) is more favorable than the hydride pathway by as much as 11.5 kcal mol^?1. Along the ionic outer‐sphere pathway, neither the multiply bonded oxo ligand nor the inherent hydride moiety participate in the activation of the Si?H bond.     

Synthesis and Rearrangement of Stable NHC→Silylene Adducts and Their Unique Reactivity towards Cyclohexylisocyanide

The syntheses and reactivity of the two N‐heterocyclic carbene (NHC)→ silylene complexes 2 and 4 have been investigated. The latter are easily accessible by reaction of the zwitterionic, N‐heterocyclic silylene LSi: 1 [L=Ar‐N‐C(=CH₂)CH?C(Me)‐N‐Ar, Ar=2,6‐iPr₂C₆H₃] with 1,3,4,5‐tetramethylimidazol‐2‐ylidene and 1,3‐diisopropyl‐4,5‐dimethylimidazol‐2‐ylidene, respectively. While compound 2 undergoes facile rearrangement above ?20 °C to give the unsymmetrical N‐heterocyclic silylcarbene 3 , the derivative 4 remains unchanged even after boiling in benzene. The remarkable reactivity of 3 and 4 towards cyclohexylisocyanide has been examined which leads in a unique series of C? H, Si? H, and C? N bond activations to the new triaminosilanes 5 and 6 , respectively. The novel compounds 3 , 4 , 5 , and 6 were fully characterized by ¹H, ¹³C, and ²⁹Si NMR spectroscopy, EI‐MS, elemental analysis, and single‐crystal X‐ray diffraction.     

The hydroxyl radical reaction rate constant and products of 3,5‐dimethyl‐1‐hexyn‐3‐ol

A bimolecular rate constant,k_DHO, of (29 ± 9) × 10^?12 cm³ molecule^?1 s^?1 was measured using the relative rate technique for the reaction of the hydroxyl radical (OH) with 3,5‐dimethyl‐1‐hexyn‐3‐ol (DHO, HC?CC(OH)(CH₃)CH₂CH(CH₃)₂) at (297 ± 3) K and 1 atm total pressure. To more clearly define DHO's indoor environment degradation mechanism, the products of the DHO + OH reaction were also investigated. The positively identified DHO/OH reaction products were acetone ((CH₃)₂C?O), 3‐butyne‐2‐one (3B2O, HC?CC(?O)(CH₃)), 2‐methyl‐propanal (2MP, H(O?)CCH(CH₃)₂), 4‐methyl‐2‐pentanone (MIBK, CH₃C(?O)CH₂CH(CH₃)₂), ethanedial (GLY, HC(?O)C(?O)H), 2‐oxopropanal (MGLY, CH₃C(?O)C(?O)H), and 2,3‐butanedione (23BD, CH₃C(?O)C(?O)CH₃). The yields of 3B2O and MIBK from the DHO/OH reaction were (8.4 ± 0.3) and (26 ± 2)%, respectively. The use of derivatizing agents O‐(2,3,4,5,6‐pentalfluorobenzyl)hydroxylamine (PFBHA) and N,O‐bis(trimethylsilyl)trifluoroacetamide (BSTFA) clearly indicated that several other reaction products were formed. The elucidation of these other reaction products was facilitated by mass spectrometry of the derivatized reaction products coupled with plausible DHO/OH reaction mechanisms based on previously published volatile organic compound/OH gas‐phase reaction mechanisms. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 534–544, 2004     

On the Effect of Tether Composition on cis/trans Selectivity in Intramolecular Diels–Alder Reactions

Intramolecular Diels–Alder (IMDA) transition structures (TSs) and energies have been computed at the B3LYP/6‐31+G(d) and CBS‐QB3 levels of theory for a series of 1,3,8‐nonatrienes, H₂C?CH? CH?CH? CH₂? X? Z? CH?CH₂ [? X? Z? =? CH₂? CH₂? ( 1 ); ? O? C(?O)? ( 2 ); ? CH₂? C(?O)? ( 3 ); ? O? CH₂? ( 4 ); ? NH? C(?O)? ( 5 ); ? S? C(?O)? ( 6 ); ? O? C(?S)? ( 7 ); ? NH? C(?S)? ( 8 ); ? S? C(?S)? ( 9 )]. For each system studied ( 1 – 9 ), cis‐ and trans‐TS isomers, corresponding, respectively, to endo‐ and exo‐positioning of the ? C? X? Z? tether with respect to the diene, have been located and their relative energies (E_rel^TS) employed to predict the cis/trans IMDA product ratio. Although the E_rel^TS values are modest (typically <3 kJ mol^?1), they follow a clear and systematic trend. Specifically, as the electronegativity of the tether group X is reduced (X?O→NH or S), the IMDA cis stereoselectivity diminishes. The predicted stereochemical reaction preferences are explained in terms of two opposing effects operating in the cis‐TS, namely (1) unfavorable torsional (eclipsing) strain about the C4? C5 bond, that is caused by the ? C? X? C(?Y)? group’s strong tendency to maintain local planarity; and (2) attractive electrostatic and secondary orbital interactions between the endo‐(thio)carbonyl group, C?Y, and the diene. The former interaction predominates when X is weakly electronegative (X?N, S), while the latter is dominant when X is more strongly electronegative (X?O), or a methylene group (X?CH₂) which increases tether flexibility. These predictions hold up to experimental scrutiny, with synthetic IMDA reactions of 1 , 2 , 3 , and 4 (published work) and 5 , 6 , and 8 (this work) delivering ratios close to those calculated. The reactions of thiolacrylate 5 and thioamide 8 represent the first examples of IMDA reactions with tethers of these types. Our results point to strategies for designing tethers, which lead to improved cis/trans‐selectivities in IMDAs that are normally only weakly selective. Experimental verification of the validity of this claim comes in the form of fumaramide 14 , which undergoes a more trans‐selective IMDA reaction than the corresponding ester tethered precursor 13 .     

Crystal structures of the pyrazinamide–p‐aminobenzoic acid (1/1) cocrystal and the transamidation reaction product 4‐(pyrazine‐2‐carboxamido)benzoic acid in the molten state

The synthesis of pharmaceutical cocrystals is a strategy to enhance the performance of active pharmaceutical ingredients (APIs) without affecting their therapeutic efficiency. The 1:1 pharmaceutical cocrystal of the antituberculosis drug pyrazinamide (PZA) and the cocrystal former p‐aminobenzoic acid (p‐ABA), C₇H₇NO₂·C₅H₅N₃O, (1), was synthesized successfully and characterized by relevant solid‐state characterization methods. The cocrystal crystallizes in the monoclinic space group P2₁/n containing one molecule of each component. Both molecules associate via intermolecular O—H...O and N—H...O hydrogen bonds [O...O = 2.6102 (15) Å and O—H...O = 168.3 (19)°; N...O = 2.9259 (18) Å and N—H...O = 167.7 (16)°] to generate a dimeric acid–amide synthon. Neighbouring dimers are linked centrosymmetrically through N—H...O interactions [N...O = 3.1201 (18) Å and N—H...O = 136.9 (14)°] to form a tetrameric assembly supplemented by C—H...N interactions [C...N = 3.5277 (19) Å and C—H...N = 147°]. Linking of these tetrameric assemblies through N—H...O [N...O = 3.3026 (19) Å and N—H...O = 143.1 (17)°], N—H...N [N...N = 3.221 (2) Å and N—H...N = 177.9 (17)°] and C—H...O [C...O = 3.5354 (18) Å and C—H...O = 152°] interactions creates the two‐dimensional packing. Recrystallization of the cocrystals from the molten state revealed the formation of 4‐(pyrazine‐2‐carboxamido)benzoic acid, C₁₂H₉N₃O₃, (2), through a transamidation reaction between PZA and p‐ABA. Carboxamide (2) crystallizes in the triclinic space group P with one molecule in the asymmetric unit. Molecules of (2) form a centrosymmetric dimeric homosynthon through an acid–acid O—H...O hydrogen bond [O...O = 2.666 (3) Å and O—H...O = 178 (4)°]. Neighbouring assemblies are connected centrosymmetrically via a C—H...N interaction [C...N = 3.365 (3) Å and C—H...N = 142°] engaging the pyrazine groups to generate a linear chain. Adjacent chains are connected loosely via C—H...O interactions [C...O = 3.212 (3) Å and C—H...O = 149°] to generate a two‐dimensional sheet structure. Closely associated two‐dimensional sheets in both compounds are stacked via aromatic π‐stacking interactions engaging the pyrazine and benzene rings to create a three‐dimensional multi‐stack structure.     

Rearrangements in Model Peptide‐Type Radicals via Intramolecular Hydrogen‐Atom Transfer

Intramolecular H‐atom transfer in model peptide‐type radicals was investigated with high‐level quantum‐chemistry calculations. Examination of 1,2‐, 1,3‐, 1,5‐, and 1,6[C ? N]‐H shifts, 1,4‐ and 1,7[C ? C]‐H shifts, and 1,4[N ? N]‐H shifts (Scheme 1), was carried out with a number of theoretical methods. In the first place, the performance of UB3‐LYP (with the 6‐31G(d), 6‐31G(2df,p), and 6‐311+G(d,p) basis sets) and UMP2 (with the 6‐31G(d) basis set) was assessed for the determination of radical geometries. We found that there is only a small basis‐set dependence for the UB3‐LYP structures, and geometries optimized with UB3‐LYP/6‐31G(d) are generally sufficient for use in conjunction with high‐level composite methods in the determination of improved H‐transfer thermochemistry. Methods assessed in this regard include the high‐level composite methods, G3(MP2)‐RAD, CBS‐QB3, and G3//B3‐LYP, as well as the density‐functional methods B3‐LYP, MPWB1K, and BMK in association with the 6‐31+G(d,p) and 6‐311++G(3df,3pd) basis sets. The high‐level methods give results that are close to one another, while the recently developed functionals MPWB1K and BMK provide cost‐effective alternatives. For the systems considered, the transformation of an N‐centered radical to a C‐centered radical is always exothermic (by 25 kJ ? mol^?1 or more), and this can lead to quite modest barrier heights of less than 60 kJ ? mol^?1 (specifically for 1,5[C ? N]‐H and 1,6[C ? N]‐H shifts). H‐Migration barriers appear to decrease as the ring size in the transition structure (TS) increases, with a lowering of the barrier being found, for example when moving from a rearrangement proceeding via a four‐membered‐ring TS (e.g., the 1,3[C ? N]‐H shift, CH₃? C(O)? NH^. → ^.CH₂? C(O)? NH₂) to a rearrangement proceeding via a six‐membered‐ring TS (e.g., the 1,5[C ? N]‐H shift, ^.NH? CH₂? C(O)? NH? CH₃ → NH₂? CH₂? C(O)? NH? CH₂^.).