Fabrication of Selenium/Carbon Core–Shell Submicrowires and Carbon Submicrotubes by a Facile Solution Process

We show a facile one‐step surfactant‐assisted solution process to fabricate selenium/carbon (Se/C) coaxial core–shell submicrowires and their transformation into carbon submicrotubes by dissolution of the Se cores at ambient temperature. The formation process of the Se/C core–shell submicrowires was investigated. The results of the investigation and further experiments confirm that the thickness of the carbon shell could be tailored by controlling the experimental conditions. The as‐synthesized Se/C core–shell submicrowires and the carbon submicrotubes are potentially useful in applications such as in nanodevices or biomedicine.     

Synthesis and Characterization of Dendrimer‐Encapsulated Bimetallic Core‐Shell PdPt Nanoparticles

Using a successive method, PAMAM dendrimer‐encapsulated bimetallic PdPt nanoparticles have been successfully prepared with core‐shell structures (Pd@Pt DENs). Evidenced by UV‐vis spectra, high resolution transmission electron microscopy, and X‐ray energy dispersive spectroscopy (EDS), the obtained Pd@Pt DENs are monodispersed and located inside the cavity of dendrimers, and they show a different structure from monometallic Pt or Pd and alloy PdPt DENs. The core‐shell structure of Pd@Pt DENs is further confirmed by infrared measurements with carbon monoxide (IR‐CO) probe. In order to prepare Pd@Pt DENs, a required Pd/Pt ratio of 1:2 is determined for the Pt shell to cover the Pd core completely. Finally, a mechanism for the formation of Pd@Pt DENs is proposed.     

Functional Polymer‐Opals from Core–Shell Colloids

Colloidal photonic crystals were prepared from monodisperse core–shell particles. The shell is hereby formed from a functional monomer, such as glycidylmethacrylate or different reactive ester monomers, which can perform chemical reactions and the core from a standard monomer, which yields highly monodisperse colloids. It was possible to crystallize the core–shell particles into artificial opals with excellent optical properties. Reactions on the functional surface of the colloids were carried out, which lead to a dramatic rise in the mechanical stability or to a functionalization of His‐tagged silicatein, which acts as nanoreactor to synthesize and immobilize gold nanoparticles from auric acid onto the core–shell colloids.

     

壳层可控导电聚吡咯/聚苯乙烯复合微球及聚吡咯中空微胶囊的制备

在导电聚合物含量较小时,含核壳结构的导电聚合物复合粒子就可以具有和本体相当的导电率,且加工性好,近年来这种核壳结构微粒的制备已引起了科学家们的广泛关注．Armes等[制备了导电聚吡咯、导电聚苯胺包覆聚苯乙烯的核壳结构胶体粒子及聚苯胺和二氧化硅的纳米复合物．刘正平等用改进的方法在粒径为116nm的单分散聚苯乙烯乳胶粒子上包覆聚吡咯,     

One‐Pot Synthesis and Electrocatalytic Properties of Pd@Pt Core‐Shell Nanocrystals with Tailored Morphologies

Pd@Pt core‐shell nanocrystals consisting of well‐defined Pd nanocube cores and dendritic Pt shells were prepared by a new facile aqueous one‐pot synthetic method. The prepared Pd@Pt nanocrystals exhibited efficient catalytic activity and stability toward methanol electrooxidation, and their catalytic function was highly dependent on their Pt shell thickness due to the different synergism between Pt and Pd.     

Preparation of Hollow Core–Shell Fe3O4/Nitrogen-Doped Carbon Nanocomposites for Lithium-Ion Batteries

Iron oxides are potential electrode materials for lithium-ion batteries because of their high theoretical capacities, low cost, rich resources, and their non-polluting properties. However, iron oxides demonstrate large volume expansion during the lithium intercalation process, resulting in the electrode material being crushed, which always results in poor cycle performance. In this paper, to solve the above problem, iron oxide/carbon nanocomposites with a hollow core–shell structure were designed. Firstly, an Fe₂O₃@polydopamine nanocomposite was prepared using an Fe₂O₃ nanocube and dopamine hydrochloride as precursors. Secondly, an Fe₃O₄@N-doped C composite was obtained by means of further carbonization treatment. Finally, Fe₃O₄@void@N-Doped C-x composites with core–shell structures with different void sizes were obtained by means of Fe₃O₄ etching. The effect of the etching time on the void size was studied. The electrochemical properties of the composites when used as lithium-ion battery materials were studied in more detail. The results showed that the sample that was obtained via etching for 5 h using 2 mol L⁻¹ HCl solution at 30 °C demonstrated better electrochemical performance. The discharge capacity of the Fe₃O₄@void@N-Doped C-5 was able to reach up to 1222 mA g h⁻¹ under 200 mA g⁻¹ after 100 cycles.     

Porous Ni@Pt Core‐Shell Nanotube Array Electrocatalyst with High Activity and Stability for Methanol Oxidation

Bimetallic core‐shell nanostructures are emerging as more important materials than monometallic nanostructures, and have much more interesting potential applications in various fields, including catalysis and electronics. In this work, we demonstrate the facile synthesis of core‐shell nanotube array catalysts consisting of Pt thin layers as the shells and Ni nanotubes as the cores. The porous Ni@Pt core‐shell nanotube arrays were fabricated by ZnO nanorod‐array template‐assisted electrodeposition, and they represent a new class of nanostructures with a high electrochemically active surface area of 50.08 m² (g Pt)^?1, which is close to the value of 59.44 m² (g Pt)^?1 for commercial Pt/C catalysts. The porous Ni@Pt core‐shell nanotube arrays also show markedly enhanced electrocatalytic activity and stability for methanol oxidation compared with the commercial Pt/C catalysts. The attractive performances exhibited by these prepared porous Ni@Pt core‐shell nanotube arrays make them promising candidates as future high‐performance catalysts for methanol electrooxidation. The facile method described herein is suitable for large‐scale, low‐cost production, and significantly lowers the Pt loading, and thus, the cost of the catalysts.     

New Route to Smart Core‐Shell Polymeric Microgels: Synthesis and Properties

Summary: A new method has been developed to prepare smart polymeric microgels that consist of well‐defined temperature‐sensitive cores with pH‐sensitive shells. The microgels were obtained directly from aqueous graft copolymerizations of N‐isopropylacrylamide and N,N‐methylenebisacrylamide from water‐soluble polymers containing amino groups such as poly(ethyleneimine) and chitosan. The gel diameters ranged from 300 to 400 nm. The unique core‐shell nanostructures, which had narrow size distributions, exhibited tuneable responses to pH and temperature.

Transmission electron micrograph of the poly(N‐isopropylacrylamide)/chitosan core‐shell microgels.     

Formation of Core‐Shell‐Corona Micellar Complexes through Adsorption of Double Hydrophilic Diblock Copolymers into Core‐Shell Micelles

Summary: The complexation between polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) micelles and poly(ethylene glycol)‐block‐poly(4‐vinyl pyridine) (PEG‐b‐P4VP) is studied, and a facile strategy is proposed to prepare core‐shell‐corona micellar complexes. Micellization of PS‐b‐PAA in ethanol forms spherical core‐shell micelles with PS block as core and PAA block as shell. When PEG‐b‐P4VP is added into the core‐shell micellar solution, the P4VP block is absorbed into the core‐shell micelles to form spherical core‐shell‐corona micellar complexes with the PS block as core, the combined PAA/P4VP blocks as shell and the PEG block as corona. A model is suggested to characterize the core‐shell‐corona micellar complexes.

Schematic formation of core‐shell‐corona (CSC) micellar complexes by adsorption of PEG‐b‐P4VP into core‐shell PS‐b‐PAA micelles.     

Structure‐Transport Relationship of Dendritic Core‐Shell Nanocarriers for Polar Dyes

TriPEGylated functionalized dendritic poly(ethylene imines) were synthesized and their transportation properties for rose Bengal (up to 50 guests per dendrimer) were evaluated. A critical aggregation concentration was observed, demonstrating the formation of aggregates among the dendrimers. The structure‐activity relationships show that their encapsulation capacities were dependent linearly on the density of the PEG shell, either as PEG length or degree of functionality, which confirmed that the PEG chains play a predominant role in the encapsulation process. It further gives some insights that the guest molecules appeared to be predominantly located in the PEG shell rather than in the core.

     

Sulfur‐Impregnated Core–Shell Hierarchical Porous Carbon for Lithium–Sulfur Batteries

Core–shell hierarchical porous carbon spheres (HPCs) were synthesized by a facile hydrothermal method and used as host to incorporate sulfur. The microstructure, morphology, and specific surface areas of the resultant samples have been systematically characterized. The results indicate that most of sulfur is well dispersed over the core area of HPCs after the impregnation of sulfur. Meanwhile, the shell of HPCs with void pores is serving as a retard against the dissolution of lithium polysulfides. This structure can enhance the transport of electron and lithium ions as well as alleviate the stress caused by volume change during the charge–discharge process. The as‐prepared HPC‐sulfur (HPC‐S) composite with 65.3 wt % sulfur delivers a high specific capacity of 1397.9 mA h g^?1 at a current density of 335 mA g^?1 (0.2 C) as a cathode material for lithium–sulfur (Li‐S) batteries, and the discharge capacity of the electrode could still reach 753.2 mA h g^?1 at 6700 mA g^?1 (4 C). Moreover, the composite electrode exhibited an excellent cycling capacity of 830.5 mA h g^?1 after 200 cycles.     

Surface‐Imprinted,Thermosensitive, Core‐Shell Nanosphere for Molecular Recognition

Summary: The D ‐glucose imprinted core‐shell nanosphere with an average size of ≈60 to 80 nm showed a significant preference for the binding of D ‐glucose than the non‐imprinted core‐shell nanosphere. Depending on temperature, the binding site in the shell with N‐isopropylacrylamide oligomer underwent a significant change in binding affinity. In addition, the D ‐glucose imprinted core‐shell nanosphere showed a two times higher affinity for D ‐glucose than L ‐glucose, suggesting chiral recognition of the binding site. The core‐shell nanosphere reported here is a good biomimetic model system with a well‐defined morphology, high surface area, and variable binding affinity through a change in temperature.

D ‐glucose imprinted core‐shell nanospheres showed excellent binding over the non‐imprinted core‐shell nanosphere.     

Fabrication and Characterization of Sulfonate‐containing Polystyrene/CaCO3 Core‐shell Nanoparticles

Polystyrene (PSt) seed latex was first prepared via soap‐free emulsion polymerization in the presence of a small amount of methacrylic acid using ammonium persulfate as initiator, and then seeded emulsion polymerization of sodium 4‐styrenesulfonate (NaSS) and St was carried out to synthesize P(St‐NaSS) core latex using 2,2′‐azobisisobutyronitrile as initiator. After that, P(St‐NaSS)/CaCO₃ core‐shell nanoparticles were fabricated by sequentially introducing Ca(OH)₂ aqueous solution and CO₂ gas into the core latex. The morphology of the core and core‐shell nanoparticles was characterized by dynamic light scattering (DLS) and transmission electron microscopy (TEM), and the state of CaCO₃ shell was confirmed with high‐resolution scanning transmission electron microscope (HR‐STEM) and selected area electron diffraction (SAED). Results showed that PNaSS chains were successfully grafted onto the PSt seed surface, and length of the PNaSS "hairs" could be modulated by adjusting NaSS amount. Sulfonic groups of the PNaSS hairs served as additives in the formation and stabilization of amorphous CaCO₃(ACC) and prevented ACC from sequent transformation into crystalline states. The amount of the anchored CaCO₃ increased with the growth of PNaSS hair length, and reached 51 wt% (by thermalgravimetric analysis) under the optimal encapsulating temperature of 45°C. Moreover, the forming mechanism of P(St‐NaSS)/CaCO₃ core‐shell nanoparticles was proposed.     

The Synthesis of Magnetic Core‐Shell Nanoparticles by Surface‐Initiated Ring‐Opening Polymerization of ε‐Caprolactone

Summary: The synthesis of core‐shell particles with a poly(ε‐caprolactone) (PCL) shell and magnetite (Fe₃O₄) contents of between 10 wt.‐% and 41 wt.‐% proceeds by surface‐initiated ring‐opening polymerization of ε‐caprolactone to give surface‐immobilized oligomers with between 1 400 g · mol⁻¹ and 11 500 g · mol⁻¹. The particles are dispersable in good solvents for the PCL shell. Magnetization experiments on the resulting superparamagnetic ferrofluids give a core‐size distribution with an average diameter, d_v, of about 9.7 nm.

TEM image of Fe₃O₄/PCL core‐shell particles cast from CHCl₃ dispersion.     

MnO@Carbon Core–Shell Nanowires as Stable High‐Performance Anodes for Lithium‐Ion Batteries

A facile method is presented for the large‐scale preparation of rationally designed mesocrystalline MnO@carbon core–shell nanowires with a jointed appearance. The nanostructures have a unique arrangement of internally encapsulated highly oriented and interconnected MnO nanorods and graphitized carbon layers forming an external coating. Based on a comparison and analysis of the crystal structures of MnOOH, Mn₂O₃, and MnO@C, we propose a sequential topotactic transformation of the corresponding precursors to the products. Very interestingly, the individual mesoporous single‐crystalline MnO nanorods are strongly interconnected and maintain the same crystallographic orientation, which is a typical feature of mesocrystals. When tested for their applicability to Li‐ion batteries (LIB), the MnO@carbon core–shell nanowires showed excellent capacity retention, superior cycling performance, and high rate capability. Specifically, the MnO@carbon core–shell nanostructures could deliver reversible capacities as high as 801 mA h g^?1 at a high current density of 500 mA g^?1, with excellent electrochemical stability after testing over 200 cycles, indicating their potential application in LIBs. The remarkable electrochemical performance can mainly be attributed to the highly uniform carbon layer around the MnO nanowires, which is not only effective in buffering the structural strain and volume variations of anodes during repeated electrochemical reactions, but also greatly enhances the conductivity of the electrode material. Our results confirm the feasibility of using these rationally designed composite materials for practical applications. The present strategy is simple but very effective, and appears to be sufficiently versatile to be extended to other high‐capacity electrode materials with large volume variations and low electrical conductivities.     

Molecularly Imprinted Multi‐Layer Core‐Shell Nanoparticles – A Surface Grafting Approach

Surface initiated living‐radical polymerization (SIP) based on dithiocarbamate iniferters has been used to create molecularly imprinted core‐shell (CS) nanoparticles. Using this approach, propranolol, morphine and naproxen have been successfully imprinted in particle shells (the latter could not be imprinted using conventional aqueous‐based CS methods). Rebinding properties of the imprinted particles appear to be similar to those made by alternative methods. The living radical initiation mechanism makes it possible to build complex multi‐layer particles sequentially. As a demonstration, multi‐layer propranolol‐imprinted particles were generated. Two additional functional shells were grown over the imprinted shell, while the propranolol binding was retained, albeit at a reduced level.

     

非晶态Ni-P空心球材料的制备及磁性质研究

采用表面活化-化学镀方法制备了非晶态Ni-P/聚苯乙烯微球核壳材料,通过除去聚苯乙烯微球内核,进而得到了非晶态Ni-P空心球材料。与晶态Ni空心球比较,非晶态Ni-P空心球显示了更好的软磁性质。     

Effect of Hydrophilic Shells on the Formation of Colloidal Crystals by Monodisperse Core‐Shell Polymer Microspheres

We have found that a soft, hydrophilic shell is necessary in the formation of three‐dimensional colloidal crystals by polymeric microspheres prepared by surfactant‐free emulsion copolymerization. The core‐shell microspheres contain a hard, hydrophobic polystyrene core and a soft, hydrophilic shell made of polyacrylamide or poly(acrylic acid) (PAA). Dilution of the particles induced a red shift of the diffraction peak. We have found a pH switching effect for the formation of colloidal crystals by the microspheres with a PAA shell. When the carboxylic‐acid groups are protonated, the colloidal crystals lose their order. The same effect is observed when a poor solvent is added to the colloidal crystals formed by the microspheres with a polyacrylamide shell.

     

Facile Synthesis of Ge@C Core–Shell Nanocomposites for High‐Performance Lithium Storage in Lithium‐Ion Batteries

Herein, we report a facile and “green” synthetic route for the preparation of Ge@C core–shell nanocomposites by using a low‐cost Ge precursor. Field‐emission scanning electron microscopy and transmission electron microscopy analyses confirmed the core–shell nanoarchitecture of the Ge@C nanocomposites, with particle sizes ranging from 60 to 100 nm. Individual Ge nanocrystals were coated by a continuous carbon layer, which had an average thickness of 2 nm. When applied as an anode materials for lithium‐ion batteries, the Ge@C nanocomposites exhibited a high initial discharge capacity of 1670 mAh g^?1 and superior rate capability. In particular, Ge@C nanocomposite electrodes maintained a reversible capacity of 734 mAh g^?1 after repeated cycling at a current density of 800 mA g^?1 over 100 cycles.     

Laser Assisted Catalytic Growth of ZnS/CdSe Core‐Shell and Wire‐Coil Nanowire Heterostructures

ZnS/CdSe core‐shell and wire‐coil nanowire heterostructures have been synthesized by chemical vapor deposition assisted with pulsed laser ablation. Measurements from high‐resolution transmission electron microscopy and selected area electron diffraction have revealed that both ZnS/CdSe core‐shell and wire‐coil nanowires are of single‐crystalline hexagonal wurtzite structures and grow along the [0001] direction. While the lattice parameters of ZnS and CdSe in the core‐shell nanowires are nearly equal to those of bulk ZnS and CdSe, change of the lattice parameters in the CdSe‐coil is attributed to the doping of Zn into CdSe, resulting in the relaxation of compressive strain at the interface between CdSe‐coil and ZnS‐wire. Composition variation across the interfacial regions in the ZnS/CdSe nanowire heterostructures ranges only 10–15 nm despite the pronounced lattice mismatch between ZnS and CdSe by ?11%. Growth mechanisms of the ZnS/CdSe nanowire heterostructures are discussed.