Experimental and theoretical studies on vibrational spectra of 4-(2-furanylmethyleneamino)antipyrine, 4-benzylideneaminoantipyrine and 4-cinnamilideneaminoantipyrine

This work deals with the IR and Raman spectroscopy of 4-(2-furanylmethyleneamino) antipyrine (FAP), 4-benzylideneaminoantipyrine (BAP) and 4-cinnamilideneaminoantipyrine (CAP) by means of experimental and quantum chemical calculations. The equilibrium geometries, harmonic frequencies, infrared intensities and Raman scattering activities were calculated by density functional B3LYP method with the 6-31G(d) basis set. The comparisons between the calculated and experimental results covering molecular structures, assignments of fundamental vibrational modes and thermodynamic properties were investigated. The optimized molecular geometries have been compared with the experimental data obtained from XRD data, which indicates that the theoretical results agree well with the corresponding experimental values. For the three compounds, comparisons and assignments of the vibrational frequencies indicate that the calculated frequencies are close to the experimental data, and the IR spectra are comparable with some slight differences, whereas the Raman spectra are different clearly and the strongest Raman scattering actives are relative tightly to the molecular conjugative moieties linked through their Schiff base imines. The thermodynamic properties (heat capacities, entropies and enthalpy changes) and their correlations with temperatures were also obtained from the harmonic frequencies of the optimized strucutres.     

Coupled calculation of vibrational frequencies and intensities

The combination of normal coordinate analysis with intensity calculations gives quantitative information about molecular force fields and the assignments of vibrational frequencies. Calculations of vibrational intensities by means of a standard CNDO/2 version give rise to satisfactory results for the IR intensities. However, the calculated Raman intensities often differ strongly from the experimental data. Inclusion of 2p-polarization functions on hydrogen in the usually used valence basis set is quite successful to obtain improved molecular polarizabilities as well as Raman intensities.     

Evaluation of range-separated hybrid density functionals for the prediction of vibrational frequencies, infrared intensities, and Raman activities

We present an assessment of different density functionals, with emphasis on range-separated hybrids, for the prediction of fundamental and harmonic vibrational frequencies, infrared intensities, and Raman activities. Additionally, we discuss the basis set convergence of vibrational properties of H2O with long-range corrected hybrids. Our results show that B3LYP is the best functional for predicting vibrational frequencies (both fundamental and harmonic); the screened-PBE hybrid (HSE) density functional works best for infrared intensities, and the long-range corrected PBE (LC-omegaPBE), M06-HF, and M06-L density functionals are almost as good as MP2 for predicting Raman activities. We show the predicted Raman spectrum of adenine as an example of a medium-size molecule where a DFT/Sadlej pVTZ calculation is affordable and compare our results against the experimental spectrum.     

FT-Raman and FT-IR spectra, vibrational assignments and density functional studies of 5-bromo-2-nitropyridine

The Fourier transform Raman and Fourier transform infrared spectra of 5-bromo-2-nitropyridine were recorded in the solid phase. The equilibrium geometry, natural atomic charges, harmonic vibrational frequencies, infrared intensities and Raman scattering activities were calculated by density functional B3LYP method with the 6-311++G(d,p) basis set. The scaled theoretical wavenumbers showed very good agreement with the experimental values. A detailed interpretations of the infrared and Raman spectra of 5-bromo-2-nitropyridine is reported on the basis of the calculated potential energy distribution (PED). The theoretical spectrograms for the Raman and IR spectra of the title molecule have been constructed.     

Theoretical Simulation of Vibrational Sum‐Frequency Generation Spectra from Density Functional Theory: Application to p‐Nitrothiophenol and 2,4‐Dinitroaniline

The molecular orientation of adsorbed molecules forming self‐assembled monolayers can be determined by combining vibrational sum‐frequency generation (SFG) measurements with quantum chemical calculations. Herein, we present a theoretical methodology used to simulate the SFG spectra for different combinations of polarizations. These simulations are based on calculations of the IR vectors and Raman tensors, which are obtained from density functional theory computations. The dependency of the SFG vibrational signature with respect to the molecular orientation is presented for the molecules p‐nitrothiophenol and 2,4‐dinitroaniline. It is found that a suitable choice of basis set as well as of exchange‐correlation (XC) functional is mandatory to correctly simulate the SFG intensities and consequently provide an accurate estimation of the adsorbed molecule orientation. Comparison with experimental data shows that calculations performed at the B3LYP/6‐311++G(d,p) level of approximation provide good agreement with experimental frequencies, and with IR and Raman intensities. In particular, it is demonstrated that polarization and diffuse functions are compulsory for reproducing the IR and Raman spectra, and consequently vibrational SFG spectra, of systems such as p‐nitrothiophenol. Moreover, the investigated XC functionals reveal their influence on the relative intensities, which show rather systematic variations with the amount of Hartree–Fock exchange. Finally, further aspects of the modeling are revealed by considering the frequency dependence of the Raman tensors.     

密度泛函理论研究黄曲霉素B1的表面增强拉曼散射效应

用密度泛函理论B3LYP方法和6—311G（d,p）／Lan12DZ优化得到黄曲霉素B1（AFBI）分子及其复合物AFB1-Ag的稳定结构,并计算了复合物的表面增强拉曼光谱和预共振拉曼光谱．结果表明,AFB1分子的拉曼光谱很大程度依赖于吸附位点以及入射光的激发波长．与分子的常规拉曼光谱相比,复合物表面增强拉曼光谱中C=O伸缩振动模的增强因子约为10^2—10^3,是由于复合物的极化率增强而导致的静态化学增强,并分析了振动模式的振动方向与其拉曼强度的关系．选择复合物最大吸收峰附近激发光266和482nm以及远离共振吸收波长785和1064nm作为入射光,计算得到不同入射光激发下复合物的预共振拉曼光谱．结果表明其增强因子最大达N100量级,主要是由电荷转移产生的共振增强引起的．     

FT-IR, FT-Raman, NMR and UV-vis spectra, vibrational assignments and DFT calculations of 4-butyl benzoic acid

The solid phase FTIR and FT-Raman spectra of 4-butyl benzoic acid (4-BBA) have been recorded in the regions 400-4000 and 50-4000cm(-1), respectively. The spectra were interpreted in terms of fundamentals modes, combination and overtone bands. The structure of the molecule was optimized and the structural characteristics were determined by density functional theory (DFT) using B3LYP method with 6-311++G(d,p) as basis set. The vibrational frequencies were calculated for monomer and dimer by DFT method and were compared with the experimental frequencies, which yield good agreement between observed and calculated frequencies. The infrared and Raman spectra were also predicted from the calculated intensities. (13)C and (1)H NMR spectra were recorded and (13)C and (1)H nuclear magnetic resonance chemical shifts of the molecule were calculated using the gauge independent atomic orbital (GIAO) method. UV-visible spectrum of the compound was recorded in the region 200-400nm and the electronic properties HOMO and LUMO energies were measured by time-dependent TD-DFT approach. The geometric parameters, energies, harmonic vibrational frequencies, IR intensities, Raman intensities, chemical shifts and absorption wavelengths were compared with the available experimental data of the molecule.     

Vibrational spectra and noncovalent interactions of carbohydrates molecules

The differences between the vibrational spectra of carbohydrates of the same chemical structure caused by the noncovalent intra- and intermolecular interactions have been systematized. In the general case, these differences show up as the following specific features of changes in the bond intensities: change in the intensity ratio of closely spaced bands (IR and Raman spectra); selective change (increase, decrease) in intensities of individual bands (IR and Raman spectra); change (increase, decrease) in intensities of practically all bands (IR and Raman spectra); appearance of strong bands in the region of low frequencies from 50 to 200 cm⁻¹ (Raman spectra); appearance of strong diffuse bands in the low-frequency range with a simultaneous great reduction in the other bands (practical disappearance of the majority of bands) (Raman Spectra). The causes of such a kind of changes in the band intensities in the vibrational spectra of carbohydrates are discussed.     

Modeling vibrational spectra using the self-consistent charge density-functional tight-binding method. I. Raman spectra

An extension of the self-consistent charge density-functional tight-binding (SCC-DFTB) method is presented that allows for calculating intensities of peaks in vibrational Raman spectra for very large molecules. The extension is based on a simple ansatz: an extra term, which describes interaction of an external electric field with induced atomic charges, is added to the SCC-DFTB energy expression. We apply the modified SCC-DFTB formalism for reproducing vibrational Raman spectra of 17 organic molecules. The calculated spectra are compared with experiment and with spectra obtained from density functional theory (DFT) calculations. We find that the SCC-DFTB method is capable of reproducing most of the features of experimental Raman spectra. Limitations and advantages of this approach are analyzed and suggestions for interpreting calculated SCC-DFTB Raman spectra are given.     

FT-IR, FT-Raman spectra and quantum chemical calculations of some chloro substituted phenoxy acetic acids

In this work, we will report a combined experimental and theoretical study on molecular and vibrational structure of o-chlorophenoxy acetic acid (OCPAA) and p-chlorophenoxy acetic acids (PCPAA). The FT-IR and Fourier transform-Raman spectra of both the compounds was recorded in the solid phase. The optimized geometry was calculated by HF and B3LYP methods with 6-311++G(d,p) basis set and harmonic vibrational frequencies, infrared intensities and Raman scattering activities were calculated by density functional B3LYP method with the 6-311++G(d,p) basis set. The scaled theoretical wavenumbers showed very good agreement with the experimental values. The thermodynamic functions of the title compounds were also performed at B3LYP/6-311++G(d,p) level of theory. A detailed interpretation of the infrared and Raman spectra of o-chloro and p-chlorophenoxy acetic acid is reported. The theoretical FT-IR spectrograms for the title molecules have been constructed.     

FT-Raman and FT-IR spectra, ab initio and density functional studies of 3,4-dichlorobenzyl alcohol

The Fourier transform Raman and Fourier transform infrared spectra of 3,4-dichlorobenzyl alcohol were recorded in the solid phase. The equilibrium geometry, harmonic vibrational frequencies, infrared intensities and Raman scattering activities, depolarization ratios, reduced masses were calculated by HF and density functional B3LYP method with the 6-311 G** basis set. The scaled theoretical wavenumbers showed very good agreement with the experimental values. The thermodynamic functions of the title compound were also performed at HF/6-311G** and B3LYP/6-311G** levels of theory. A detailed interpretations of the infrared and Raman spectra of 3,4-dichlorobenzyl alcohol is reported. The theoretical spectrograms for FT-IR spectra of the title molecule have been constructed.     

Hydrogen bonding and molecular vibrations of 3,5-diamino-1,2,4-triazole

This work deals with the analysis of hydrogen bonding and the vibrational spectroscopy of 3,5-diamino-1,2,4-triazole by means of quantum chemical calculations. The mid and far FTIR and FT-Raman spectra were measured in the condensed state. The fundamental vibrational frequencies were calculated under different possible symmetries by applying the density functional theory with the B3LYP functional and the 6-31G* basis set. The results of the calculations obtained under C(2) symmetry produces the global minimum on the potential energy surface. The vibrational spectra were interpreted with the aid of normal coordinate analysis based on scaled density functional force field. The infrared and Raman spectra were also predicted from the calculated intensities.     

Comparison of experimental and ab initio HF and DFT vibrational spectra of benzimidazole

In this work, we will report a combined experimental and theoretical study on molecular and vibrational structure of benzimidazole. The laser Raman and Fourier transform infrared spectra of benzimidazole were recorded in the solid phase. The equilibrium geometry, harmonic vibrational frequencies, infrared intensities, Raman scattering activities, depolarization ratios and reduced masses were calculated by HF and density functional B3LYP method with the 6-311G(d,p) basis set. The scaled theoretical wavenumbers showed very good agreement with the experimental values. The thermodynamic functions of the title compound were also performed at HF/6-31G(d,p)/6-311G(d,p) and B3LYP/6-31G(d,p)/6-311G(d,p) levels of theory. A detailed interpretations of the infrared and Raman spectra of benzimidazole is reported. The theoretical spectrograms for FT-IR spectra of the title molecule have been constructed.     

Density functional theory study of vibrational spectra, and assignment of fundamental vibrational modes of succinimide and N-bromosuccinimide

This work deals with the vibrational spectroscopy of succinimide and N-bromosuccinimide. The mid and far FTIR and FT-Raman spectra were measured in the condensed state. The fundamental vibrational frequencies and intensity of vibrational bands were evaluated using density functional theory (DFT) using standard B3LYP/6-31G(*) and B3LYP/6-311+G(**) methods and basis set combinations. The vibrational spectra were interpreted, with the aid of normal coordinate analysis based on a scaled quantum mechanical force field. The infrared and Raman spectra were also predicted from the calculated intensities. Comparison of simulated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes. Unambiguous vibrational assignment of all the fundamentals were made using the total energy distribution (TED).     

Simulation of IR and Raman spectra of p-hydroxyanisole and p-nitroanisole based on scaled DFT force fields and their vibrational assignments

This work deals with the vibrational spectroscopy of p-hydroxyanisole (PHA) and p-nitroanisole (PNA) by means of quantum chemical calculations. The mid and far FT-IR and FT-Raman spectra were recorded in the condensed state. The fundamental vibrational frequencies and intensity of vibrational bands were evaluated using density functional theory (DFT) with the standard B3LYP/6-31G* method and basis set combination and were scaled using various scale factors which yield a good agreement between observed and calculated frequencies. The vibrational spectra were interpreted with the aid of normal coordinate analysis based on scaled density functional force field. The results of the calculations were applied to simulate infrared and Raman spectra of the title compounds, which showed excellent agreement with the observed spectra.     

Revised vibrational band assignments for the experimental IR and Raman spectra of 2,3,4-trifluorobenzonitrile based on ab initio, DFT and normal coordinate calculations

In the present study, a systematic vibrational spectroscopic investigation for the experimental IR and Raman spectra of 2,3,4-trifluorobenzonitrile (TFB), aided by electronic structure calculations has been carried out. The electronic structure calculations – ab initio (RHF) and hybrid density functional methods (B3LYP) – have been performed with 6-31G* basis set. Molecular equilibrium geometries, electronic energies, IR intensities, harmonic vibrational frequencies, depolarization ratios and Raman activities have been computed. The results of the calculations have been used to simulate IR and Raman spectra for TFB that showed excellent agreement with the observed spectra. Potential energy distribution (PED) and normal mode analysis have also been performed. The assignments proposed based on the experimental IR and Raman spectra have been reviewed. A complete assignment of the observed spectra has been proposed.     

Vibrational spectra and fundamental structural assignments from HF and DFT calculations of methyl benzoate

The Fourier transform Raman and Fourier transform infrared spectra of methyl benzoate (MB) were recorded in the liquid phase. The equilibrium geometry, harmonic vibrational frequencies, infrared intensities and Raman scattering activities, depolarization ratios, reduced masses were calculated by Hartree-Fock (HF) and density functional B3LYP method with the 6-311+G(d,p) basis set. The scaled theoretical wavenumbers showed very good agreement with the experimental values. The thermodynamic functions of the title compound were also performed at HF/6-311+G(d,p) and B3LYP/6-311+G(d,p) levels of theory. A detailed interpretations of the infrared and Raman spectra of methyl benzoate is reported. The theoretical spectrograms for FT-IR spectra of the title molecule have been constructed.     

FTIR and FT-Raman spectra, assignments, ab initio HF and DFT analysis of xanthine

The molecular vibrations of xanthine were investigated in polycrystalline sample, at room temperature by Fourier transform infrared (FTIR) and FT-Raman spectroscopies. The spectra of the molecule have been recorded in the regions 4000-50 cm(-1) and 3500-100 cm(-1), respectively. Theoretical information on the optimized geometry, harmonic vibrational frequencies, infrared and Raman intensities were obtained by means of ab initio Hartree-Fock (HF) and density functional theory (DFT) gradient calculations with complete relaxation in the potential energy surface using 6-311++G(d,p) basis set. The vibrational frequencies which were determined experimentally from the spectral data are compared with those obtained theoretically from ab initio and DFT calculations. A close agreement was achieved between the observed and calculated frequencies by refinement of the scale factors. The infrared and Raman spectra were also predicted from the calculated intensities. Thermodynamic properties like entropy, heat capacity, zero point energy have been calculated for the molecule. Unambiguous vibrational assignment of all the fundamentals was made using the potential energy distribution (PED).     

The performance of different density functional methods in the calculation of molecular structures and vibrational spectra of platinum(II) antitumor drugs: cisplatin and carboplatin

A comparison of eight density functional models for predicting the molecular structures, vibrational frequencies, infrared intensities, and Raman scattering activities of platinum(II) antitumor drugs, cisplatin and carboplatin, is reported. Methods examined include the pure density functional protocols (G96LYP, G96PW91, modified mPWPW and original PW91PW91), one‐parameter hybrid approaches (mPW1PW and mPW1LYP), and three‐parameter hybrid models (B3LYP and B3PW91), as well as the HF and MP2 levels of theory. Different effective core potentials (ECPs) and several basis sets are considered. The theoretical results are discussed and compared with the experimental data. It is remarkable that the mPW1PW protocol introduced by Adamo and Barone [J Chem Phys 1998, 108, 664], is clearly superior to all the remaining density functional methods (including B3LYP). The geometry and vibrational frequencies of cisplatin and carboplatin calculated with the mPW1PW method, and the ECP of Hay and Wadt (LanL2DZ basis set) are in better agreement with experiment than those obtained with the MP2 method. The use of more elaborated ECP and the enlargements of basis sets do not significantly improve the results. A clear‐cut assignments of the platinum‐ligand vibrations in cisplatin and carboplatin are presented. It is concluded that mPW1PW is the new reliable method, which can be used in predicting molecular structures and vibrational spectra of large coordination compounds containing platinum(II). © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 901–912, 2001