Yttrium and lanthanide diphosphanylamides: syntheses and structures of complexes with one [(Ph2P)2N]- ligand in the coordination sphere

Treatment of the recently reported potassium salt [K(thf)(n)][N(PPh(2))(2)] (n=1.25, 1.5) with anhydrous yttrium or lanthanide trichlorides in THF leads after crystallization from THF/n-pentane (1:2) to the monosubstituted diphosphanylamide complexes [LnCl(2)[(Ph(2)P)(2)N](thf)(3)] (Ln=Y, Sm, Er, Yb). The single-crystal X-ray structures of these complexes show that the metal atoms are surrounded by seven ligands in a distorted pentagonal bipyramidal arrangement, in which the chlorine atoms are located in the apical positions. The diphosphanylamide ligand is always eta(2)-coordinated through the nitrogen atom and one phosphorus atom. Further reaction of [SmCl(2)[(Ph(2)P)(2)N](thf)(3)] with K(2)C(8)H(8) or reaction of [LnI(eta(8)-C(8)H(8))(thf)(3)] with [K(thf)(n)][N(PPh(2))(2)] in THF gives the corresponding cyclooctatetraene complexes [Ln[(Ph(2)P)(2)N](eta(8)-C(8)H(8))(thf)(2)] (Ln=La, Sm). The single crystals of these compounds contain enantiomerically pure complexes. Both compounds adopt a four-legged piano-stool conformation in the solid state. The structures of the A and the C enantiomers were established by single-crystal X-ray diffraction. The more soluble bistrimethylsilyl cyclooctatetraene complex [Y[(Ph(2)P)(2)N](eta(8)-1,4-(Me(3)Si)(2)C(8)H(6))(thf)(2)] was obtained by transmetallation of Li(2)[1,4-(Me(3)Si)(2)C(8)H(6)] with anhydrous yttrium trichloride in THF followed by the addition of one equivalent of [K(thf)(n)][N(PPh(2))(2)]. The (89)Y NMR signal of the complex is split up into a triplet, supporting other observations that the phosphorus atoms are chemically equivalent in solution and, thus, dynamic behavior of the ligand in solution can be anticipated.     

Amido-bridged double-cube nitrido complexes containing titanium and magnesium/calcium

Treatment of the single cube nitrido complexes [(thf)x((Me3Si)2N)M((mu3-N)(mu3-NH)2Ti3(eta5-C5Me5)3(mu3-N))](M = Mg, x= 0; Ca, x= 1) with one equivalent of anilines NH2Ar in toluene affords the arylamido complexes [(ArHN)M((mu3-N)(mu3-NH)2Ti3(eta5-C5Me5)3(mu3-N))]n[M = Mg (3), n= 1, Ar = 4-MeC6H4; Ca (4), n= 2, Ar = 2,4,6-Me3C6H2]. The magnesium complex 3 has a single-cube structure whereas the X-ray crystal structure of the analogous calcium derivative 4 shows two cube-type azaheterometallocubane moieties Ca((mu3-N)(mu3-NH)2Ti3(eta5-C5Me5)3(mu3-N)) held together by two mu-2,4,6-trimethylanilido ligands. Complexes 3 and 4 react with chloroform-d1 at room temperature to give the metal halide adducts [Cl2M((mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N))](M = Mg, Ca). A solution of 3 in n-hexane gave complex [(Mg2(mu3-N)(mu3-NH)5[Ti3(eta5-C5Me5)3(mu3-N)]2)(mu-NHAr)3] which shows three mu-4-methylanilido ligands bridging two [MgTi3N4] cube type cores according to an X-ray crystal structure determination.     

Co-complexation of Lithium Gallates on the Titanium Molecular Oxide {[Ti(η(5)-C(5)Me(5))(μ-O)}(3)(μ(3)-CH)

Amide and lithium aryloxide gallates [Li(+){RGaPh(3)}(-)] (R = NMe(2), O-2,6-Me(2)C(6)H(3)) react with the μ(3)-alkylidyne oxoderivative ligand [{Ti(η(5)-C(5)Me(5))(μ-O)}(3)(μ(3)-CH)] (1) to afford the gallium-lithium-titanium cubane complexes [{Ph(3)Ga(μ-R)Li}{Ti(η(5)-C(5)Me(5))(μ-O)}(3)(μ(3)-CH)] [R = NMe(2) (3), O-2,6-Me(2)C(6)H(3) (4)]. The same complexes can be obtained by treatment of the [Ph(3)Ga(μ(3)-O)(3){Ti(η(5)-C(5)Me(5))}(3)(μ(3)-CH)] (2) adduct with the corresponding lithium amide or aryloxide, respectively. Complex 3 evolves with formation of 5 as a solvent-separated ion pair constituted by the lithium dicubane cationic species [Li{(μ(3)-O)(3)Ti(3)(η(5)-C(5)Me(5))(3)(μ(3)-CH)}(2)](+) together with the anionic [(GaPh(3))(2)(μ-NMe(2))](-) unit. On the other hand, the reaction of 1 with Li(p-MeC(6)H(4)) and GaPh(3) leads to the complex [Li{(μ(3)-O)(3)Ti(3)(η(5)-C(5)Me(5))(3)(μ(3)-CH)}(2)][GaLi(p-MeC(6)H(4))(2)Ph(3)] (6). X-ray diffraction studies were performed on 1, 2, 4, and 5, while trials to obtain crystals of 6 led to characterization of [Li{(μ(3)-O)(3)Ti(3)(η(5)-C(5)Me(5))(3)(μ(3)-CH)}(2)][PhLi(μ-C(6)H(5))(2)Ga(p-MeC(6)H(4))Ph] 6a.     

Half-sandwich o-N,N-dimethylaminobenzyl complexes over the full size range of group 3 and lanthanide metals. synthesis, structural characterization, and catalysis of phosphine P--H bond addition to carbodiimides

The acid-base reactions between the rare-earth metal (Ln) tris(ortho-N,N-dimethylaminobenzyl) complexes [Ln(CH2C(H4NMe2-o)3] with one equivalent of the silylene-linked cyclopentadiene-amine ligand (C5Me4H)SiMe2NH(C6H2Me3-2,4,6) afforded the corresponding half-sandwich aminobenzyl complexes [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}Ln(CH2C6H4NMe2-o)(thf)] (2-Ln) (Ln=Y, La, Pr, Nd, Sm, Gd, Lu) in 60-87 % isolated yields. The one-pot reaction between ScCl(3) and [Me2Si(C5Me4)(NC6H2Me3-2,4,6)]Li2 followed by reaction with LiCH2C6H4NMe2-o in THF gave the scandium analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}Sc(CH2C6H4NMe2-o)] (2-Sc) in 67 % isolated yield. 2-Sc could not be prepared by the acid-base reaction between [Sc(CH2C6H4NMe2-o)3] and (C5Me4H)SiMe2NH(C6H2Me3-2,4,6). These half-sandwich rare-earth metal aminobenzyl complexes can serve as efficient catalyst precursors for the catalytic addition of various phosphine P--H bonds to carbodiimides to form a series of phosphaguanidine derivatives with excellent tolerability to aromatic carbon-halogen bonds. A significant increase in the catalytic activity was observed, as a result of an increase in the metal size with a general trend of La>Pr, Nd>Sm>Gd>Lu>Sc. The reaction of 2-La with 1 equiv of Ph2PH yielded the corresponding phosphide complex [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La(PPh2)(thf)2] (4), which, on recrystallization from benzene, gave the dimeric analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La(PPh2)]2 (5). Addition of 4 or 5 to iPrN=C=NiPr in THF yielded the phosphaguanidinate complex [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La{iPrNC(PPh2)NiPr}(thf)] (6), which, on recrystallization from ether, afforded the ether-coordinated structurally characterizable analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La{iPrNC(PPh2)NiPr}(OEt2)] (7). The reaction of 6 or 7 with Ph2PH in THF yielded 4 and the phosphaguanidine iPrN=C(PPh2)NHiPr (3a). These results suggest that the catalytic formation of a phosphaguanidine compound proceeds through the nucleophilic addition of a phosphide species, which is formed by the acid-base reaction between a rare-earth metal o-dimethylaminobenzyl bond and a phosphine P--H bond, to a carbodiimide, followed by the protonolysis of the resultant phosphaguanidinate species by a phosphine P--H bond. Almost all of the rare earth complexes reported this paper were structurally characterized by X-ray diffraction studies.     

Heavy alkaline earth metal pyrazolates: synthetic pathways, structural trends, and comparison with divalent lanthanoids

Two series of heavy alkaline earth metal pyrazolates, [M(Ph(2)pz)(2)(thf)(4)] 1 a-c (Ph(2)pz=3,5-diphenylpyrazolate, M=Ca, Sr, Ba; THF=tetrahydrofuran) and [M(Ph(2)pz)(2)(dme)(n)] (M=Ca, 2 a, Sr, 2 b, n=2; M=Ba, 2 c, n=3; DME=1,2-dimethoxyethane) have been prepared by redox transmetallation/ligand exchange utilizing Hg(C(6)F(5))(2). Compounds 1 a and 2 b were also obtained by redox transmetallation with Tl(Ph(2)pz). Alternatively, direct reaction of the alkaline earth metals with 3,5-diphenylpyrazole at elevated temperatures under solventless conditions yielded compounds 1 a-c and 2 a-c upon extraction with THF or DME. By contrast, [M(Me(2)pz)(2)(Me(2)pzH)(4)] 3 a-c (M=Ca, Sr, Ba; Me(2)pzH=3,5-dimethylpyrazole) were prepared by protolysis of [M[N(SiMe(3))(2)](2)(thf)(2)] (M=Ca, Sr, Ba) with Me(2)pzH in THF and by direct metallation with Me(2)pzH in liquid NH(3)/THF. Compounds 1 a-c and 2 a-c display eta(2)-bonded pyrazolate ligands, while 3 a,b exhibit eta(1)-coordination. Complexes 1 a-c have transoid Ph(2)pz ligands and an overall coordination number of eight with a switch from mutually coplanar Ph(2)pz ligands in 1 a,b to perpendicular in 1 c. In eight coordinate 2 a,b the pyrazolate ligands are cisoid, whilst 2 c has an additional DME ligand and a metal coordination number of ten. By contrast, 3 a,b have octahedral geometry with four eta(1)-Me(2)pzH donors, which are hydrogen-bonded to the uncoordinated nitrogen atoms of the two trans Me(2)pz ligands. The application of synthetic routes initially developed for the preparation of lanthanoid pyrazolates provides detailed insight into the similarities and differences between the two groups of metals and structures of their complexes.     

Poly(pyrazolyl)aluminate complexes containing aluminum-hydrogen bonds

The treatment of LiAlH(4) with 2, 3, or 4 equiv of the 3,5-disubstituted pyrazoles Ph(2)pzH or iPr(2)pzH afforded [Li(THF)(2)][AlH(2)(Ph(2)pz)(2)] (97%), [Li(THF)][AlH(Ph(2)pz)(3)] (96%), [Li(THF)(4)][Al(Ph(2)pz)(4)] (95%), and [Li(THF)][AlH(iPr(2)pz)(3)] (89%). The treatment of ZnCl(2) with [Li(THF)][AlH(Ph(2)pz)(3)] afforded Zn(AlH(Ph(2)Pz)(3))H (70%). X-ray crystal structures of these complexes demonstrated κ(2) or κ(3) coordination of the aluminum-based ligands to the Li or Zn ions. The treatment of [Li(THF)][AlH(Ph(2)pz)(3)] with MgBr(2) or CoCl(2) in THF/Et(2)O solutions, by contrast, afforded the pyrazolate transfer products Mg(2)Br(2)(Ph(2)pz)(2)(THF)(3)·2THF (25%) and Co(2)Cl(2)(Ph(2)pz)(2)(THF)(3)·THF (23%) as colorless and blue crystalline solids, respectively. An analogous treatment of [Li(THF)][AlH(Ph(2)pz)(3)] with MCl(2) (M = Mn, Fe, Ni, Cu) afforded metal powders and H(2), illustrating hydride transfer from Al to M as a competing reaction path.     

A convenient route to lanthanide triiodide THF solvates. Crystal structures of LnI(3)(THF)(4) [Ln = Pr] and LnI(3)(THF)(3.5) [Ln = Nd, Gd, Y

The reaction between 1.5 equiv of elemental iodine and rare earth metals in powder form in THF at room temperature gives the rare earth triiodides LnI(3)(THF)(n)() in good yields. Purification by Soxhlet extraction of the crude solids with THF reliably gives the THF adducts LnI(3)(THF)(4) [Ln = La, Pr] and LnI(3)(THF)(3.5) [Ln = Nd, Sm, Gd, Dy, Er, Tm, Y] as microcrystalline solids. X-ray crystallography reveals that the early, larger lanthanide iodide PrI(3)(THF)(4) crystallizes as discrete molecules having a pentagonal bipyramidal structure, whereas the later, smaller lanthanide iodides LnI(3)(THF)(3.5) [Ln = Nd, Gd, Y] crystallize as solvent-separated ion pairs [LnI(2)(THF)(5)][LnI(4)(THF)(2)] in which the cations adopt a pentagonal bipyramidal geometry and the anions adopt an octahedral geometry in the solid state.     

Synthesis and structural characterization of alkaline-earth-metal bis(amido)silane and lithium oxobis(aminolato)silane complexes

Several of alkaline-earth-metal complexes [(η(2):η(2):μ(N):μ(N)-Li)(+)](2)[{η(2)-Me(2)Si(DippN)(2)}(2)Mg](2-) (4), [η(2)(N,N)-Me(2)Si(DippN)(2)Ca·3THF] (5), [η(2)(N,N)-Me(2)Si(DippN)(2)Sr·THF] (6), and [η(2)(N,N)-Me(2)Si(DippN)(2)Ba·4THF] (7) of a bulky bis(amido)silane ligand were readily prepared by the metathesis reaction of alkali-metal bis(amido)silane [Me(2)Si(DippNLi)(2)] (Dipp = 2,6-i-Pr(2)C(6)H(3)) and alkaline-earth-metal halides MX(2) (M = Mg, X = Br; M = Ca, Sr, Ba, X = I). Alternatively, compounds 5-7 were synthesized either by transamination of M[N(SiMe(3))(2)](2)·2THF (M = Ca, Sr, Ba) and [Me(2)Si(DippNH)(2)] or by transmetalation of Sn[N(SiMe(3))(2)](2), [Me(2)Si(DippNH)(2)], and metallic calcium, strontium, and barium in situ. The metathesis reaction of dilithium bis(amido)silane [Me(2)Si(DippNLi)(2)] and magnesium bromide in the presence of oxygen afforded, however, an unusual lithium oxo polyhedral complex {[(DippN(Me(2)Si)(2))(μ-O)(Me(2)Si)](2)(μ-Br)(2)[(μ(3)-Li)·THF](4)(μ(4)-O)(4)(μ(3)-Li)(2)} (8) with a square-basket-shaped core Li(6)Br(2)O(4) bearing a bis(aminolato)silane ligand. All complexes were characterized using (1)H, (13)C, and (7)Li NMR and IR spectroscopy, in addition to X-ray crystallography.     

Routes to unique palladium A-frame complexes with a bridging fluoro-ligand

Treatment of a toluene solution of [PdMe(2)(Cy(2)PCH(2)PCy(2))](1) with pentafluoropyridine in the presence of traces of water affords the generation of the A-frame complexes [(PdMe)(2){mu-kappa(2)(P,P)Cy(2)PCH(2)PCy(2)}(2)(mu-F)][SiMeF(4)]() and [(PdMe)(2){mu-kappa(2)(P,P)Cy(2)PCH(2)PCy(2)}(2)(mu-F)][OC(5)NF(4)](2b). If the reaction is performed in an NMR tube equipped with a PFA inliner, complex 2b is produced, only. Treatment of 1 with pentafluoropyridine in the presence of an excess water yields the pyridyloxy complex [PdMe(OC(5)NF(4))(Cy(2)PCH(2)PCy(2))](3). Compound [(PdMe)(2){mu-kappa(2)(P,P)Cy(2)PCH(2)PCy(2)}(2)(mu-F)][FHF](2c) bearing a bifluoride anion instead of SiMeF(4)(-) or OC(5)NF(4)(-) can be generated by reaction of 1 with substoichiometric amounts of Et(3)N.3HF. The analogous complex [(PdMe)(2){mu-kappa(2)(P,P)Ph(2)PCH(2)PPh(2)}(2)(mu-F)][FHF] (5c) has been synthesized by addition of Ph(2)PCH(2)PPh(2) to a solution of [PdMe(2)(Me(2)NCH(2)CH(2)NMe(2))](4) in THF and subsequent treatment of the reaction mixture with Et(3)N.3HF. The structure of the A-frame complex 5c has been determined by X-ray crystallography.     

Zwitterionic and cationic bis(phosphine) platinum(II) complexes: structural,electronic, and mechanistic comparisons relevant to ligand exchange and benzene C-H activation processes

Structurally similar but charge-differentiated platinum complexes have been prepared using the bidentate phosphine ligands [Ph(2)B(CH(2)PPh(2))(2)], ([Ph(2)BP(2)], [1]), Ph(2)Si(CH(2)PPh(2))(2), (Ph(2)SiP(2), 2), and H(2)C(CH(2)PPh(2))(2), (dppp, 3). The relative electronic impact of each ligand with respect to a coordinated metal center's electron-richness has been examined using comparative molybdenum and platinum model carbonyl and alkyl complexes. Complexes supported by anionic [1] are shown to be more electron-rich than those supported by 2 and 3. A study of the temperature and THF dependence of the rate of THF self-exchange between neutral, formally zwitterionic [Ph(2)BP(2)]Pt(Me)(THF) (13) and its cationic relative [(Ph(2)SiP(2))Pt(Me)(THF)][B(C(6)F(5))(4)] (14) demonstrates that different exchange mechanisms are operative for the two systems. Whereas cationic 14 displays THF-dependent, associative THF exchange in benzene, the mechanism of THF exchange for neutral 13 appears to be a THF independent, ligand-assisted process involving an anchimeric, eta(3)-binding mode of the [Ph(2)BP(2)] ligand. The methyl solvento species 13, 14, and [(dppp)Pt(Me)(THF)][B(C(6)F(5))(4)] (15), each undergo a C-H bond activation reaction with benzene that generates their corresponding phenyl solvento complexes [Ph(2)BP(2)]Pt(Ph)(THF) (16), [(Ph(2)SiP(2))Pt(Ph)(THF)][B(C(6)F(5))(4)] (17), and [(dppp)Pt(Ph)(THF)][B(C(6)F(5))(4)] (18). Examination of the kinetics of each C-H bond activation process shows that neutral 13 reacts faster than both of the cations 14 and 15. The magnitude of the primary kinetic isotope effect measured for the neutral versus the cationic systems also differs markedly (k(C(6)H(6))/k(C(6)D(6)): 13 = 1.26; 14 = 6.52; 15 approximately 6). THF inhibits the rate of the thermolysis reaction in all three cases. Extended thermolysis of 17 and 18 results in an aryl coupling process that produces the dicationic, biphenyl-bridged platinum dimers [[(Ph(2)SiP(2))Pt](2)(mu-eta(3):eta(3)-biphenyl)][B(C(6)F(5))(4)](2) (19) and [[(dppp)Pt](2)(mu-eta(3):eta(3)-biphenyl)][B(C(6)F(5))(4)](2) (20). Extended thermolysis of neutral [Ph(2)BP(2)]Pt(Ph)(THF) (16) results primarily in a disproportionation into the complex molecular salt [[Ph(2)BP(2)]PtPh(2)](-)[[Ph(2)BP(2)]Pt(THF)(2)](+). The bulky phosphine adducts [Ph(2)BP(2)]Pt(Me)[P(C(6)F(5))(3)] (25) and [(Ph(2)SiP(2))Pt(Me)[P(C(6)F(5))(3)]][B(C(6)F(5))(4)] (29) also undergo thermolysis in benzene to produce their respective phenyl complexes, but at a much slower rate than for 13-15. Inspection of the methane byproducts from thermolysis of 13, 14, 15, 25, and 29 in benzene-d(6) shows only CH(4) and CH(3)D. Whereas CH(3)D is the dominant byproduct for 14, 15, 25, and 29, CH(4) is the dominant byproduct for 13. Solution NMR data obtained for 13, its (13)C-labeled derivative [Ph(2)BP(2)]Pt((13)CH(3))(THF) (13-(13)()CH(3)()), and its deuterium-labeled derivative [Ph(2)B(CH(2)P(C(6)D(5))(2))(2)]Pt(Me)(THF) (13-d(20)()), establish that reversible [Ph(2)BP(2)]-metalation processes are operative in benzene solution. Comparison of the rate of first-order decay of 13 versus the decay of d(20)-labeled 13-d(20)() in benzene-d(6) affords k(13)()/k(13-d20)() approximately 3. The NMR data obtained for 13, 13-(13)()CH(3)(), and 13-d(20)() suggest that ligand metalation processes involve both the diphenylborate and the arylphosphine positions of the [Ph(2)BP(2)] auxiliary. The former type leads to a moderately stable and spectroscopically detectable platinum(IV) intermediate. All of these data provide a mechanistic outline of the benzene solution chemistries for the zwitterionic and the cationic systems that highlights their key similarities and differences.     

Catalytic addition of amine N-H bonds to carbodiimides by half-sandwich rare-earth metal complexes: efficient synthesis of substituted guanidines through amine protonolysis of rare-earth metal guanidinates

Reaction of [Ln(CH(2)SiMe(3))(3)(thf)(2)] (Ln=Y, Yb, and Lu) with one equivalent of Me(2)Si(C(5)Me(4)H)NHR' (R'=Ph, 2,4,6-Me(3)C(6)H(2), tBu) affords straightforwardly the corresponding half-sandwich rare-earth metal alkyl complexes [{Me(2)Si(C(5)Me(4))(NR')}Ln(CH(2)SiMe(3))(thf)(n)] (1: Ln = Y, R' = Ph, n=2; 2: Ln = Y, R' = C(6)H(2)Me(3)-2,4,6, n=1; 3: Ln = Y, R' = tBu, n=1; 4: Ln = Yb, R' = Ph, n=2; 5: Ln = Lu, R' = Ph, n=2) in high yields. These complexes, especially the yttrium complexes 1-3, serve as excellent catalyst precursors for the catalytic addition of various primary and secondary amines to carbodiimides, efficiently yielding a series of guanidine derivatives with a wide range of substituents on the nitrogen atoms. Functional groups such as C[triple chemical bond]N, C[triple chemical bond]CH, and aromatic C--X (X: F, Cl, Br, I) bonds can survive the catalytic reaction conditions. A primary amino group can be distinguished from a secondary one by the catalyst system, and therefore, the reaction of 1,2,3,4-tetrahydro-5-aminoisoquinoline with iPrN==C==NiPr can be achieved stepwise first at the primary amino group to selectively give the monoguanidine 38, and then at the cyclic secondary amino unit to give the biguanidine 39. Some key reaction intermediates or true catalyst species, such as the amido complexes [{Me(2)Si(C(5)Me(4))(NPh)}Y(NEt(2))(thf)(2)] (40) and [{Me(2)Si(C(5)Me(4))(NPh)}Y(NHC(6)H(4)Br-4)(thf)(2)] (42), and the guanidinate complexes [{Me(2)Si(C(5)Me(4))(NPh)}Y{iPrNC(NEt(2))(NiPr)}(thf)] (41) and [{Me(2)Si(C(5)Me(4))(NPh)}Y{iPrN}C(NC(6)H(4)Br-4)(NHiPr)}(thf)] (44) have been isolated and structurally characterized. Reactivity studies on these complexes suggest that the present catalytic formation of a guanidine compound proceeds mechanistically through nucleophilic addition of an amido species, formed by acid-base reaction between a rare-earth metal alkyl bond and an amine N--H bond, to a carbodiimide, followed by amine protonolysis of the resultant guanidinate species.     

Synthesis and structures of a 3-sila-beta-diketiminatomagnesium bromide, ketenimide and triflate

The crystalline compounds [Mg(Br)(L)(thf)].0.5Et2O [L = {N(R)C(C6H3Me2-2,6)}2SiR, R = SiMe3] (1), [Mg(L){N=C=C(C(Me)=CH)2CH2}(D)2] [D = NCC6H3Me2-2,6 (2), thf (3)] and [{Mg(L)}2{mu-OSO(CF3)O-[mu}2] (4) were prepared from (a) Si(Br)(R){C(C6H3Me2-2,6)=NR}2 and Mg for (1), (b) [Mg(SiR3)2(thf)2] and 2,6-Me2C6H3CN (5 mol for (2), 3 mol for (3)), and (c) (2) + Me3SiOS(O)2CF3 for (4); a coproduct from (c) is believed to have been the trimethylsilyl ketenimide Me3SiN=C=C{C(Me)=CH}2CH2 (5).     

Structural and magnetic studies of the tris(cyclopentadienyl)manganese(II) "paddle-wheel" anions [Cp(3-n)(MeCp)(n)Mn](-) (n=0-3, MeCp=C(5)H(4)CH(3), Cp=C(5)H(5))

The ion-contact complexes [{(eta(5)-Cp)(2)Mn(eta(2):eta(5)-Cp)K}(3)]x0.5 THF (1x0.5 THF) and [{(eta(2)-Cp)(2)(eta(2);eta(5)-MeCp)MnK(thf)}]x2 THF (2x2 THF) and ion-separated complexes [Mg(thf)(6)][(eta(2)-Cp)(3)Mn](2) (3), [Mg(thf)(6)][(eta(2)-Cp)(eta(2)-MeCp)(2)Mn)](2)x0.5 THF (4x0.5 THF), [Mg(thf)(6)][(eta(2)-MeCp)(3)Mn)](2)x0.5 THF (5x0.5 THF) and [Li([12]crown-4)](5)[(eta-Cp)(3)Mn](5) (6) (Cp=C(5)H(5), CpMe=C(5)H(4)CH(3)), have been prepared and structurally characterised. The effects of varying the Cp and CpMe ligands in complexes 1-5 have been probed by variable-temperature magnetic susceptibility measurements and EPR spectroscopic studies.     

A ternary Cu-Sn-S cluster complex--(NBu4)[Cu19S28(SnPh)12(PEt2Ph)3

Reaction of a mixture of CuCl, PhSnCl(3) and PEt(2)Ph with S(SiMe(3))(2) in THF resulted initially in the unexpected synthesis of the ionic, mixed copper-tin sulfide cluster [Li(thf)(4)][Cu(19)S(28)(SnPh)(12)(PEt(2)Ph)(3)] in low yields. However, by adding NBu(4)Cl to the reaction solutions we were able to selectively synthesize the structurally similar cluster ion in (NBu(4))[Cu(19)S(28)(SnPh)(12)(PEt(2)Ph)(3)]. Structural characterization by single crystal X-ray analysis reveals that the cluster anions consist in principle of a copper sulfide core decorated by PhSn(3+) groups. Although additional phosphine ligands are attached to copper atoms the clusters possess an open 'Cu(3)S(3)' face mostly protected by the [Li(thf)(4)](+) and (NBu(4))(+) counterions in the crystal structure. The cluster (NBu(4))[Cu(19)S(28)(SnPh)(12)(PEt(2)Ph)(3)] displays near-infrared, temperature-dependent photoluminescence at ～820-930 nm in the solid state, which is especially bright at temperatures below ～100 K.     

Constitution of Grignard reagent RMgCl in tetrahydrofuran

The constitution of Grignard reagent, RMgCl (R = Me, tBu, Ph or benzyl), was investigated in the solid state by means of X-ray crystallography and in THF by coldspray ionization mass spectrometry (CSI-MS). Three types of crystal structures, (a) [Mg2(mu-Cl3)(THF)6](+)*[RMgCl2(THF)](-), (b) R2Mg4Cl6(THF)6, and (c) [2Mg2(mu-Cl3)(THF)6](+)*[R4Mg2Cl2]2-, were identified, and MeMg2(mu-Cl3)(THF)4-6 were detected as major species of MeMgCl in solution.     

Alkaline earth metal complexes of a phosphine-borane-stabilized carbanion: synthesis, structures, and stabilities

The reaction between either MgI2 or CaI2 and 2 equiv of [(Me3Si)2{Me2(H3B)P}C]K (2) in toluene gives the corresponding organo-alkaline earth metal compounds [(Me3Si)2{Me2(H3B)P}C]2M in moderate to good yields [M = Mg (3), Ca (4)]. Compound 3 crystallizes solvent-free, whereas X-ray quality crystals of 4 could not be obtained in the absence of coordinating solvents; crystallization of 4 from cold methylcyclohexane/THF gives the solvate [(Me3Si)2{Me2(H3B)P}C]2Ca(THF)4 (4a). The corresponding heavier alkaline earth metal complexes [(Me3Si)2{Me2(H3B)P}C]2M(THF)5 [M = Sr (7), Ba (8)] are obtained from the reaction between MI2 and 2 equiv of 2 in THF, followed by recrystallization from cold methylcyclohexane/THF. Compound 3 degrades over a period of several weeks at room-temperature both in the solid state and in toluene solution to give the free phosphine-borane (Me3Si)2{Me2(H3B)P}CH (5) as the sole phosphorus-containing product. In addition, compounds 3, 4, and 4a react rapidly with THF in toluene solution, yielding 5 as the sole phosphorus-containing product; in contrast, compounds 7 and 8 are stable toward this solvent.     

Unusual iron(III) ate complexes stabilized by Li-pi interactions

Several iron(III) complexes incorporating diamidoether ligands are described. The reaction between [Li(2)[RN(SiMe(2))](2)O] and FeX(3) (X=Cl or Br; R=2,4,6-Me(3)Ph or 2,6-iPr(2)Ph) form unusual ate complexes, [FeX(2)Li[RN(SiMe(2))](2)O](2) (2, X=Cl, R=2,4,6-Me(3)Ph; 3, X=Br, R=2,4,6-Me(3)Ph; 4, X=Cl, R=2,6-iPr(2)Ph) which are stabilized by Li-pi interactions. These dimeric iron(III)-diamido complexes exhibit magnetic behaviour characteristic of uncoupled high spin (S= 5/2 ) iron(III) centres. They also undergo halide metathesis resulting in reduced iron(II) species. Thus, reaction of 2 with alkyllithium reagents leads to the formation of iron(II) dimer [Fe[Me(3)PhN(SiMe(2))](2)O](2) (6). Similarly, the previously reported iron(III)-diamido complex [FeCl[tBuN(SiMe(2))](2)O](2) (1) reacts with LiPPh(2) to yield the iron(II) dimer [Fe[tBuN(SiMe(2))](2)O](2) but reaction with LiNPh(2) gives the iron(II) product [Fe(2)(NPh(2))(2)[tBuN(SiMe(2))](2)O] (5). Some redox chemistry is also observed as side reactions in the syntheses of 2-4, yielding THF adducts of FeX(2): the one-dimensional chain [FeBr(2)(THF)(2)](n) (7) and the cluster [Fe(4)Cl(8)(THF)(6)]. The X-ray crystal structures of 3, 5 and 7 are described.     

Synthesis and structural characterisation of a novel phosphine-borane-stabilised dicarbanion and an unusual bis(phosphine-borane)

The reaction between the phosphine-borane-substituted alkene [Pr(n)(2)P(BH(3))](Me(3)Si)C[double bond]CH(2) and elemental lithium in THF yields the complex [(pmdeta)Li[Pr(n)(2)P(BH(3))](Me(3)Si)CCH(2)](2)(2b) after recrystallisation; an X-ray crystallographic study of 2b reveals that the lithium is bound to the BH(3) hydrogens of the ligand, with no Li-C(carbanion) contact.     

Novel Mo(V)-dithiolene compounds: characterization of nonsymmetric dithiolene complexes by electrospray ionization mass spectrometry

Three new Mo(V) dithiolene compounds have been synthesized by addition of alkynes ((Me(3)Si)(2)C(2) (TMSA), (Me(3)Si)(2)C(4), and (Ph)(2)C(4) to MoO(2)S(2)(2-) in a MeOH/NH(3) mixture: [Mo(2)(O)(2)(mu-S)(2)(eta(2)-S(2))(eta(2)-S(2)C(2)H(2))](2)(-) 1, [Mo(2)(O)(X)(mu-S)(2)(eta(2)-S(2))(eta(2)-S(2)C(2)Ph(C(2)Ph))](2-) 2 (X = O or S), and [Mo(2)(O)(2)(mu-S)(2)(eta(2)-S(2))(eta(2)-S(2)C(2)H(C(2)H))](2-) 3. The structure of 1 as determined by single-crystal X-ray diffraction study (space group Pbca, a = 13.3148(1) A, b = 15.7467(4) A, c = 28.4108(7) A, V = 5956.7(2) A(3)) is discussed. 2 and 3 have been identified by ESMS (electrospray mass spectrometry), (1)H NMR, (13)C NMR, and infrared spectroscopies. This investigation completes our previous study devoted to the addition of DPA (C(2)Ph(2)) to MoO(2)S(2)(2-) which led to [Mo(2)(O)(X)(mu-S)(2)(eta(2)-S(2))(eta(2)-S(2)C(2)Ph(2))](2-) 4 (X = O or S). A reaction scheme is proposed to explain the formation of the different species present in solution. The reactivity of the remaining nucleophilic site of these complexes (eta(2)-S(2)) toward dicarbomethoxyacetylene (DMA) is also discussed.     

Schlenk's early "free" carbanions

Nearly a century ago, Schlenk published the syntheses and isolation of two most remarkable and unstable complexes: crystalline [Ph(3)C(-)][Me(4)N(+)] and [PhCH(2) (-)][Me(4)N(+)]. The crystal structure of the first complex contains a "free" Ph(3)C(-) ion, which displays the expected planar trigonal geometry at its central carbon atom. The phenyl groups are not orientated in the typical propeller arrangement, but instead display various orientations with respect to the molecular plane. These orientations can be directly related to the extent of charge delocalization and correlate well with other structural characteristics related to charge delocalization. The crystal structure also shows a network of C-H(delta+)...C(delta-) and C-H...pi interactions. Only C-H...pi interactions to the most negative charged phenyl rings are observed. The absolute Br?nsted acidity of Me(4)N(+) is calculated by the G2(MP2) method (287.7 kcal mol(-1)) and is compared to the calculated acidity of Me(4)P(+) (268.4 kcal mol(-1)). On this basis, the pK(a) value for Me(4)N(+) is estimated at 29.6. This makes the existence, and especially Schlenk's early isolation, of the "free" carbanions [Ph(3)C(-)][Me(4)N(+)] and [PhCH(2) (-)][Me(4)N(+)] quite noteworthy.