Homotopy analysis solution for micropolar fluid flow through porous channel with expanding or contracting walls of different permeabilities

The flow of a micropolar fluid through a porous channel with expanding or contracting walls of different permeabilities is investigated. Two cases are considered, in which opposing walls undergo either uniform or non-uniform motion. In the first case,the homotopy analysis method (HAM) is used. to obtain the expressions for the velocity and micro-rotation fields. Graphs are sketched for some parameters. The results show that the expansion ratio and the different permeabilities have important effects on the dynamic characteristics of the fluid. Following Xu's model, in the second case which is more general, the wall expansion ratio varies with time. Under this assumption, the governing equations are transformed into nonlinear partial differential equations that can also be solved analytically by the HAM. In the process, both algebraic and exponential models are considered to describe the evolution of α(t) from the initial state α0 to the final state α1. As a result, the time-dependent solutions are found to approach the steady state very rapidly. The results show that the time-dependent variation of the wall expansion ratio can be ignored because of its limited effects.     

Perturbation solution to unsteady flow in a porous channel with expanding or contracting walls in the presence of a transverse magnetic field

An incompressible flow in a porous channel with expanding or contacting walls in the presence of a transverse magnetic field is considered. Using similarity transformations, the governing equations are reduced to the nonlinear ordinary differential equations. The exact similar solutions for the different cases of the expansion ratio and the Hartmann number are obtained with a singular perturbation method, and the associated behavior is discussed in detail.     

ASYMPTOTIC ANALYSIS OF STABILITY PROBLEM OF PLANE POISEUILLE FLOW FOR HIGH REYNOLDS NUMBER

A study of the stabifity of plane Poiseuille flow at higher Reynolds number is made. Within a "triple-deck" structural framework, the qualitative behaviour of the eigenvalue of Orr-Sommerfeld equation is analytically obtained. The corresponding eigenfunction is formulated approximately.     

On the correction by McClintock and Irwin

In the case of quasi-brittle fracture, at the crack tip there is a small plastic region whose affection cannot be neglected. Therefore the linear elastic asympototic fields must be corrected. In 1965 F. A. McClintock and G. R. Irwin presented a correction which since then has been adopted extensively. Here in this paper, it must be pointed out that such correction is wrong. A correct result is given.Communicated by Chien Wei-zang.     

Homotopy analysis solutions for the asymmetric laminar flow in a porous channel with expanding or contracting walls

In this paper, the asymmetric laminar flow in a porous channel with expanding or contracting walls is investigated. The governing equations are reduced to ordinary ones by using suitable similar transformations. Homotopy analysis method (HAM) is employed to obtain the expres- sions for velocity fields. Graphs are sketched for values of parameters and associated dynamic characteristics, especially the expansion ratio, are analyzed in detail.     

Perturbation solutions for asymmetric laminar flow in porous channel with expanding and contracting walls

The cases of large Reynolds number and small expansion ratio for the asym- metric laminar flow through a two-dimensional porous expanding channel are considered. The Navier-Stokes equations are reduced to a nonlinear fourth-order ordinary differential equation by introducing a time and space similar transformation. A singular perturbation method is used for the large suction Reynolds case to obtain an asymptotic solution by matching outer and inner solutions. For the case of small expansion ratios, we are able to obtain asymptotic solutions by double parameter expansion in either a small Reynolds number or a small asymmetric parameter. The asymptotic solutions indicate that the Reynolds number and expansion ratio play an important role in the flow behavior. Nu- merical methods are also designed to confirm the correctness of the present asymptotic solutions.     

Non-radial flow of an incompressible fluid of second grade in a contracting channel

The steady non-radial flow of an incompressible fluid of second grade in a contracting channel is studied. The dependence of the flow on the material parameters of the fluid and on the channel angle is investigated. A similarity transformation is introduced for the streamfunction which reduces the P.D.E. to a sequence of O.D.E.s. A series solution is employed to solve the problem.

---

Sommario Si studia il flusso stazionario non radiale di un fluido di secondo grado incomprimibile in un canale convergente, esaminandone la dipendenza dai parametri materiali del fluido e dall'angolo di apertura del canale. Si introduce una trasformazione di similitudine per la funzione di corrente che riduce l'equazione di moto ad una serie di equazioni differenziali ordinarie, risolte numericamente.

     

Numerical simulation of flow of micropolar fluids in a channel with a porous wall

Two‐dimensional steady, laminar, and incompressible flow of a micropolar fluid in a channel with no‐slip at one wall and constant uniform injection through the other wall is considered for different values of the Reynolds number R. The main flow stream is superimposed by constant injection velocity at the porous wall. The micropolar model introduced by Eringen is used to describe the working fluid. An extension of Berman's similarity transformations is used to reduce governing equations to a set of nonlinear coupled ordinary differential equations (ODEs) in dimensionless form. An algorithm based on finite difference method is employed to solve these ODEs and Richardson's extrapolation is used to obtain higher order accuracy. It has been found that the magnitude of shear stress increases strictly at the impermeable wall whereas it decreases steadily at the permeable wall, by increasing the injection velocity. The maximum value of streamwise velocity and that of the microrotation both increase with increasing the magnitude of R. Copyright © 2010 John Wiley & Sons, Ltd.     

On the Stokes entry flow into a semi-infinite circular cylindrical tube

The problem of Stokes entry flow into a semi-infinite circular cylindrical tube was studied in this paper. A new kind of series solutions was derived. Their evident difference from the solutions in References [1,2] is that the present solutions don ’t involve infinite integral. So they are favourable for calculation. We calculated an example by allocated method and obtained satisfied results.     

Homotopy solution for flow of a micropolar fluid on a continuous moving surface

In this paper, the steady boundary layer flow and heat transfer of a micropolar fluid on an isothermal continuously moving plane surface is studied analytically. It is assumed that the microinertia density is variable and the viscous dissipation effect is taken into account. The system of nonlinear ordinary differential equations is solved analytically using the homotopy analysis method (HAM) and the results are obtained for various flow and heat transfer characteristics. By using HAM, accurate analytic series solutions are obtained in the whole spatial region. Also, a new suggestion for choosing the proper value of the auxiliary parameter ? in the convergence region is proposed. It is observed that the present solutions have higher accuracy when the residual error is obtained. The present results show that this algorithm is effective and can be similarly applied to other nonlinear equations. Copyright © 2010 John Wiley & Sons, Ltd.     

Solution of fully developed free convection of a micropolar fluid in a vertical channel by homotopy analysis method

In this paper, we reconsider the problem of fully developed natural convection heat and mass transfer of a micropolar fluid in a vertical channel with asymmetric wall temperatures and concentrations. The resulting boundary‐value problem is solved analytically by the homotopy analysis method. The accuracy of the present solution is found to be in excellent agreement with the solutions of Cheng (Int. Commun. Heat Mass Transfer 2006; 33 :627–635). Copyright © 2008 John Wiley & Sons, Ltd.     

Analytic homotopy solution of generalized three-dimensional channel flow due to uniform stretching of the plate

In this communication a generalized threedimensional steady flow of a viscous fluid between two infinite parallel plates is considered. The flow is generated due to uniform stretching of the lower plate in x- and y-directions. It is assumed that the upper plate is uniformly porous and is subjected to constant injection. The governing system is fully coupled and nonlinear in nature. A complete analytic solution which is uniformly valid for all values of the dimensionless parameters β, Re and λ is obtained by using a purely analytic technique, namely the homotopy analysis method. Also the effects of the parameters β, Re and λ on the velocity field are discussed through graphs.     

MHD stagnation point flow towards heated shrinking surface subjected to heat generation/absorption

The magnetohydrodynamic(MHD) stagnation point flow of micropolar fluids towards a heated shrinking surface is analyzed.The effects of viscous dissipation and internal heat generation/absorption are taken into account.Two explicit cases,i.e.,the prescribed surface temperature(PST) and the prescribed heat flux(PHF),are discussed.The boundary layer flow and energy equations are solved by employing the homotopy analysis method.The quantities of physical interest are examined through the presentation of plots/tabulated values.It is noticed that the existence of the solutions for high shrinking parameters is associated closely with the applied magnetic field.     

Numerical analysis of fluid flow and mass transfer in a channel with a porous bottom wall

The flow of a solution between parallel plates is considered. The bottom plate is porous, while the top one is an impermeable solid. A computer program based on the control volume approach was developed to analyse the flow and concentration fields. The effects of the slip at the porous wall on the velocity and particle concentration distributions were investigated. It was observed that as the slip increases, the concentration on the porous wall decreases and the maximum velocity moves towards the porous wall. The concentration on the porous wall increases in the flow direction. This increase in the particle concentration along the porous wall may cause a reduction of the porosity and hence a variation in the suction rate along the porous wall. In order to take this effect into account, a linearly varying transverse velocity along the porous wall was considered. The results were compared with the data available in the literature.     

Steady flow through a slender tapered vessel with a partially permeable wall and closed end

We study the flow of a viscous fluid through a slender tapered tube whose radius may reduce to zero. The vessel is closed at the end, so that the flow is made possible owing to the fact that a portion of the tube wall is permeable. The smallness of the tube aspect ratio is exploited using an upscaling technique leading to a degenerate differential equation for pressure. Solutions are found either in explicit form or as power series expansions. This class of flows may represent, though in a largely approximated way, the blood flow though a coronary artery.     

On the solution of MHD flow over a nonlinear stretching sheet by an efficient semi‐analytical technique

The problem of magneto‐hydrodynamic fluid flow past a nonlinear stretching sheet in the presence of a transverse magnetic field is analyzed. The governing equations are transformed into a nonlinear ordinary differential equation that is solved using a novel spectral homotopy analysis method and the Matlab in‐built numerical solverttbvp4c. The new technique removes some known limitations of the homotopy analysis method and offers a more systematic way of selecting initial approximations and the optimal auxiliary parameter ?. A comparison with the numerical solution confirms the robustness, the computational efficiency, and the accuracy of the technique. Copyright © 2011 John Wiley & Sons, Ltd.     

Analytical solution to stagnation-point flow and heat transfer over a stretching sheet based on homotopy analysis

This paper is concerned with two-dimensional stagnation-point steady flow of an incompressible viscous fluid towards a stretching sheet whose velocity is proportional to the distance from the slit. The governing system of partial differential equations is first transformed into a system of dimensionless ordinary differential equations. Analytical solutions of the velocity distribution and dimensionless temperature profiles are obtained for different ratios of free stream velocity and stretching velocity, Prandtl number, Eckert number and dimensionality index in series forms using homotopy analysis method（HAM）. It is shown that a boundary layer is formed when the free stream velocity exceeds the stretching velocity, and an inverted boundary layer is formed when the free stream velocity is less than the stretching velocity. Graphs are presented to show the effects of different parameters.     

Von Kármán rotating flow of Maxwell nanofluids featuring the Cattaneo-Christov theory with a Buongiorno model

This research paper analyzes the transport of thermal and solutal energy in the Maxwell nanofluid flow induced above the disk which is rotating with a constant angular velocity.The significant features of thermal and solutal relaxation times of fluids are studied with a Cattaneo-Christov double diffusion theory rather than the classical Fourier’s and Fick’s laws.A novel idea of a Buongiorno nanofluid model together with the Cattaneo-Christov theory is introduced for the first time for the Maxwel...     

Investigation of two‐dimensional channel flow with a partially compliant wall using finite volume–finite difference approach

This paper presents a numerical simulation of steady two‐dimensional channel flow with a partially compliant wall. Navier–Stokes equation is solved using an unstructured finite volume method (FVM). The deformation of the compliant wall is determined by solving a membrane equation using finite difference method (FDM). The membrane equation and Navier–Stokes equation are coupled iteratively to determine the shape of the membrane and the flow field. A spring analogy smoothing technique is applied to the deformed mesh to ensure good mesh quality throughout the computing procedure. Numerical results obtained in the present simulation match well with that in the literature. Copyright © 2005 John Wiley & Sons, Ltd.     

不稳定伸展表面上的薄液膜流动分析

探讨了不稳定伸展表面上的薄液膜流动问题.利用相似变换将边界层流动控制方程转化为常微分方程边值问题.利用同伦分析方法获得解析解,讨论不稳定参数对液膜流动的影响,得到一般性规律.将部分级数解与前人的数值解进行比较,结果具有较高的一致性.该方法还可以用于其他科学工程问题.