规则结构钛酸盐自组装聚集体的制备

在水热条件下, 采用不同的钛源, 通过控制溶液碱度和冷却温度等反应条件, 利用无模板自组装技术, 在钛酸盐薄膜表面及溶液相中制备了鸟巢状和绒球状钛酸盐纳米带自组装聚集体以及海胆状钛酸盐纳米管自组装聚集体. 通过引入碳酸钠模板, 制备出形貌新颖的钛酸钠-碳酸钠香蒲状自组装聚集体复合材料. 初步研究了纳米自组装聚集体的形成机理, 认为其形成经历了一维纳米结构(纳米带或纳米管)的生长和一维纳米结构的自组装2个过程.     

溶剂热合成三维蔷薇花状SnS2微晶

在乙二醇溶剂热条件下,采用SnCl4·H2O和硫代氨基脲为原料,成功制备出了三维蔷薇花状的SnS2微晶.产品用X-射线粉末衍射(XRD)、场发射扫描电子显微镜(FESEM)、透射电子显微镜(TEM)、拉曼光谱(RS)和紫外一可见吸收光谱(UV-Vis)对样品进行了表征.结果表明SnS2蔷薇花是由纳米级厚度的片状"花瓣"相互连接、交叠、缠绕自组装生长而成.并对蔷薇花状SnS2三维结构的生长机理进行了简单探讨.     

柔软的球状和长方体状氧化硅中空结构的制备研究

采用自组装形成的芘纳米结构作为模板,成功地制备了柔软的球状和长方体状氧化硅中空结构.当不同量的芘在十六烷基三甲基溴化铵(CTAB)溶液中自组装时,产生的自组装结构展现出明显的从球状到长方体状的形貌变化.这些结构被用作氧化硅前驱体溶胶-凝胶反应的模板,获得了球状和长方体状氧化硅/芘复合结构.通过乙醇除去模板后,生成了柔软的球状(直径约为400nm)和长方体状(长为0.5—2.5μm)的氧化硅中空结构.这些结果展现了采用有机纳米结构作为模板来合成无机中空结构的优势:合成简便、结构多样以及结构形貌的灵活可控.     

二氧化锡纳米粒子在高硅TON，MFI和FAU型沸石外表面的形成和聚集

将高硅TON, MFI和FAU沸石分别浸渍于SnCl₂溶液，再于873 K温度下焙烧，在高硅TON,MFI和FAU沸石外表面制备出二氧化锡纳米粒子。用XRD和SAED表征生成物的物相，TEM表征形成二氧化锡纳米粒子的形貌、尺寸和聚集状态。结果显示：在TON, MFI和FAU沸石外表面形成二氧化锡纳米粒子的尺寸分别在8 nm, 10-80 nm和6 nm。在室温下用40%的氢氟酸分解SnO₂-TON和SnO₂-MFI分别得到二氧化锡微胶囊和网状的二氧化锡纳米结构。同在NaY沸石表面形成的纳米二氧化锡比较，在具有一维孔道体系的TON沸石和二维孔道体系的MFI沸石外表面形成的纳米二氧化锡的形貌与聚集状态都不相同，这表明沸石的骨架类型、表面结构与特性在沸石外表面形成二氧化锡纳米结构时起重要作用。     

尺寸可控的金纳米粒子在功能化的MWNTs表面的自组装

提出了一个有效的、以晶种媒介的光化学法可控生长不同尺寸的胶体金纳米粒子在多壁碳纳米管(MWNTs)表面的自组装.方法基于羧基化的MWNTs以双官能团巯基乙酸分子化学修饰而连接上巯基,随后,不同尺寸的胶体金纳米粒子以共价结合的方式分别被直接锚定在其表面,从而获得良好的Au/MWNTs杂化材料.通过UV-Vis光谱、TEM和XRS等技术对胶体金纳米粒子、Au/MWNTs复合物及其自组装过程的表征,详细研究了金纳米粒子尺寸对功能化MWNTs表面自组装的影响,结果表明,直径为2.5～5.2nm范围很好分散的金纳米粒子能够很好自组装在平均直径约20nm的功能化MWNTs表面上.同时探讨了双官能团分子的化学修饰和金纳米粒子对MWNTs表面自组装的驱动力。     

两亲性嵌段共聚物的合成及其在离子液体中的自组装行为

采用阴离子开环聚合法合成了两亲性嵌段共聚物PLA-PEG-PLA.用FT-IR,1H NMR和GPC等手段对嵌段共聚物的结构组成进行了表征.两亲性嵌段共聚物在离子液体1-丁基-3-甲基咪唑六氟磷酸盐中能自组装成胶束,用透射电子显微镜观察了聚合物在离子液体中形成胶束的纳米结构.当疏水链长固定时,胶束的自组装形状主要依赖于亲水链的长度.两亲性共聚物在离子液体中可自组装成可控制结构的纳米胶束,这种纳米结构胶束在很多领域具有广泛的应用前景.     

对称两嵌段共聚物/均聚物共混体系受限在球形纳米孔内的自组装行为

采用模拟退火方法系统研究了对称两嵌段共聚物AB/均聚物A或C混合体系受限在球形纳米孔内的自组装行为.结果表明,体系的自组装结构受均聚物含量、均聚物链长、受限尺度以及A-C间相互作用强度的影响.随着均聚物含量的变化,体系可形成多种自组装结构,包括类洋葱层、笼状、类拱顶状、螺旋状、堆叠圆盘和圆环、平层、及球状结构.当A-C...     

帽状锡纳米粒子的制备及其表面等离子的共振特性

采用真空热蒸发法在SiO2自组装单层膜上沉积金属锡, 制备了帽状锡纳米结构, 通过扫描电镜(SEM)、原子力显微镜(AFM)、X射线衍射(XRD)仪和Cary 5000紫外-可见-近红外(UV-Vis-NIR)分光光度计对其表面形貌、结构以及光谱特性进行了研究和表征. 结果表明, 制备的复合纳米粒子呈帽状, 表面等离子共振峰位具有明显的可调谐性, 随二氧化硅粒径的增大或锡帽层厚度的增加, 表面等离子共振吸收峰向长波方向移动.     

具有多级孔MCM-41/Y复合分子筛的合成及表征

采用晶种法和纳米组装法合成了MCM-41/Y复合分子筛,通过粉末XRD、SEM、TEM和BET等手段对其物性进行表征,结果显示:采用晶种法合成的形貌以包埋型为主,采用纳米组装法合成的材料为附晶生长和自组装型.二者均具有微、介孔多级孔道结构,比表面积达到665.1和849.3 m2·g-1,总孔容分别为0.6438和0.6529 cm3·g-1,相对于单一Y分子筛明显增大.纳米组装法合成样品的比表面积增大更为显著,这是由于两种合成体系粒子表面电荷和集聚方式不同.     

表面功能化聚苯乙烯纳米微球的制备及自组装

用乳液聚合的方法合成了表面富含羧基的聚苯乙烯纳米微球，采用热分析、红外、透射电镜和X射线粉末衍射仪等对其进行了结构和性能表征;并用自组装的方法将其在玻璃表面组装成膜.考察了制备条件，通过对自组装薄膜原子力显微镜形貌图的分析，确立了最佳组装方案.     

Synthesis of thermally stable highly ordered nanoporous tin oxide thin films with a 3D face-centered orthorhombic nanostructure

Thin films of nanoporous tin oxide with a 3D face-centered orthorhombic nanostructure have been synthesized by self-assembly that is controlled by post-coating thermal treatment under controlled humidity. In contrast to the conventional evaporation-induced self-assembly (EISA), the films here have no ordered nanostructure after dip-coating. However, the initial coatings are formed under conditions that inhibit significant hydrolysis and condensation for extended periods. This allows the use of postsynthesis thermal vapor treatments to completely control the formation of the nanostructure. With EO106-PO70-EO106 (Pluronic F127) triblock copolymer as the template, highly ordered nanostructures were generated by exposing the disordered films to a stream of water vapor at elevated temperature, which rehydrates the films and allows the formation of the thermodynamically favored phase. Further exposure to water vapor drives the condensation reaction through the elimination of HCl. The X-ray diffraction pattern from the nanostructure was indexed in the space group Fmmm as determined by analysis of 2D small-angle X-ray scattering patterns at various angles of incidence. The nanostructure is then stabilized and made nanoporous by extended controlled thermal treatments. After self-assembly and template removal, the films are thermally stable up to 600 degrees C and retain an ordered, face-centered orthorhombic nanostructure.     

A new route to self-assembled tin dioxide nanospheres: fabrication and characterization

Nearly monodispersed self-assembled tin dioxide (SnO2) nanospheres with intense photoluminescence (PL) were synthesized using a new wet chemistry technique. Instead of coprecipitating stannous salts, bulk tin (Sn) metal was oxidized at room temperature in a solution of hydrogen peroxide and deionized water containing polyvinylpyrrolidone (PVP) and ethylenediamine (EDA). SnO2 nanocrystals were produced with diameters of approximately 3.8 nm that spontaneously self-assembled into uniform SnO2 nanospheres with diameters of approximately 30 nm. Analysis was performed by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, high-resolution transmission electron microscopy, selected area electron diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, UV-vis absorption spectroscopy, PL spectroscopy, and fluorescence lifetime measurements. The SnO2 nanospheres displayed room-temperature purple luminescence with an intense band at 394 nm (approximately 3.15 eV) and a high quantum yield of approximately 15%, likely as a result of emission from the surface states of SnO2/PVP complexes. The present study could open a new avenue to large-scale synthesis of self-assembled functional oxide nanostructures with technological applications as purple emitters, biological labels, gas sensors, lithium batteries, and dye-sensitized solar cells.     

化学气相沉积法制备Sn2S3一维纳米结构阵列

运用化学气相沉积法(CVD), 直接以Sn和S为原料分区加热蒸发, 通过控制温度分布、气压、载气流量和金属铅纳米颗粒分布等宏观实验条件, 成功制备大面积Sn₂S₃一维纳米结构阵列. 扫描电子显微镜(SEM)图片显示: Sn₂S₃一维纳米结构的横向尺度在100 nm左右, 长约几个微米. X射线衍射（XRD）谱显示: 所制备样品的晶体结构属于正交晶系, 沿[002]方向生长. 紫外-可见漫反射谱表明Sn₂S₃一维纳米结构是带隙为2.0 eV的直接带隙半导体. 讨论了温度分布和金属铅纳米颗粒对Sn₂S₃一维纳米结构生长的影响, 并指出其生长可能遵循气-固(V-S)生长机理.     

非晶SiO2纳米灯笼的制备和表征

在1000 ℃用活性炭把二氧化锡粉末还原成单质锡, 锡作为催化剂, 硅片作为硅源同时作为收集衬底, 在硅片上制备出了非晶SiO2纳米灯笼. 灯笼的一端连在硅片上, 另一端为一个锡球, 中间是一些圆弧状的SiO2纳米线把两端相连. 纳米灯笼具有良好的对称性. 利用扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)、选区电子衍射(SAED) 和HRTEM自带的能谱分析仪(EDS)对样品的表面形貌、微观结构和成分进行了分析研究. 结果表明, 灯笼中SiO2纳米线为非晶态, 结点是晶态锡, 结点表面覆盖一层非晶态的硅的氧化物. 结合实验条件对纳米灯笼的生长机理进行了讨论, 提出了纳米灯笼生长的一个模型.     

CdS和CdSe新型纳米结构的高效溶剂热合成

采用快速高效的溶剂热法合成了海星形CdS纳米结构和一维CdSe纳米结构。用XRD、SEM和UV-Vis等表征手段对产物进行了表征，结果表明产物为单一的CdS和CdSe纳米结构，且CdS纳米结构具有良好的分散性，其形成极大地受到pH值影响，而CdSe先形成层状的二维结构、再形成一维纳米结构。     

Synthesis and Photocatalytic Activity of One-dimensional ZnO-Zn2SnO4 Mixed Oxide Nanowires

Mixed oxide photocatalysts, ZnO-Zn2SnO4 (ZnO-ZTO) nanowires with different sizes were prepared by a simple thermal evaporation method. The ZnO-ZTO nanowires were characterized with a scanning electron microscope, X-ray diffraction, high-resolution transmission electron microscopy, energy-dispersive spectrometer, and X-ray photoelectron spectrThe photocatalytic activity of the ZnO-ZTO mixed nanowires were studied by observing the photodegradation behaviors of methyl orange aqueous solution. The results suggest that the ZnO-ZTO mixed oxide nanowires have a higher photocatalytic activity than pure ZnO and Zn2SnO4 nanowires. The photocatalyst concentration in the solution distinctly affects the degradation rate, and our results show that higher photodegradation efficiency can be achieved with a smaller amount of ZnO-ZTO nanowire catalyst, as compared to the pure ZnO and ZTO nanowires. Moreover, the photocatalytic activity can also be enhanced by reducing the average diameter of the nanowires. The activity of pure ZnO and ZTO nanowires are also enhanced by physically mixing them. These results can be explained by the synergism between the two semiconductors.     

Facile synthesis and catalytic property of porous tin dioxide nanostructures

Porous tin dioxide (SnO(2)) nanostructures consisting of nanoplates are prepared through thermal decomposition of the mixed solution composed of dibutyltin dilaurate and acetic acid. The aggregations of the nanoplates give rise to large macropores with the size of about 100-300 nm. These nanoplates have a wormhole-like porous structure with the size of about 4 nm and possess high surface area. X-ray powder diffraction, transmission electron microscopy, scanning electron microscopy, infrared spectroscopy, and nitrogen sorption have been employed to characterize the obtained porous structures. It is found that the obtained nanostructures exhibit excellent catalytic activity toward methanol decomposition. Such porous structures with high surface area have promising industrial applications as catalysts.     

气相合成SnO2超微粒薄膜研究

用直流气体放电活化反应蒸发法在玻璃基片上沉积的SnO2超微粒薄膜,研究其过程中各工艺参数对薄膜结构的影响及作用机理.结果表明, SnO2超微粒薄膜粒径随氧分压增加而增大;蒸镀时间的延长有助于SnO2的生成,也使薄膜发生晶化;而增加放电电压,则薄膜出现外延单晶生长趋势.     

Effect of RuO2 in the shape selectivity of submicron-sized SnO2 structures

Several dissimilar types of tin oxide microstructures including bipyramids, cubes, and wires synthesized effectively by means of a simple approach were investigated using X-ray diffraction (XRD), thermogravimetry/differential thermometric analysis (TG-DTA), and X-ray photoelectron spectroscopy (XPS). A possible growth mechanism is proposed using the results of these studies. The texture coefficient values of all the structures, indexed to a tetragonal lattice, exhibit amazing variation in the preferred orientation with respect to their shapes. Although XPS data indicate that wires and cubes have a strong SnO(2) type signal, bipyramids interestingly exhibit both SnO and SnO(2) signals and a correlation of the binding energy helps in understanding the growth kinetics of such submicron structures. The results suggest that the bipyramids are formed because of the vapor-solid process (VS) while wires and cubes are formed by the vapor-liquid-solid (VLS) progression.     

CO oxidation on nanostructured SnO(x)/Pt(111) surfaces: unique properties of reduced SnO(x)

We have investigated surface CO oxidation on "inverse catalysts" composed of SnO(x) nanostructures supported on Pt(111) using X-ray photoelectron spectroscopy (XPS), low-energy ion scattering spectroscopy (LEISS) and temperature-programmed desorption (TPD). Nanostructures of SnO(x) were prepared by depositing Sn on Pt(111) pre-covered by NO(2) layers at low temperatures. XPS data show that the SnO(x) nanoparticles are highly reduced with Sn(II)O being the dominant oxide species, but the relative concentration of Sn(II) in the SnO(x) nanoparticles decreases with increasing Sn coverage. We find that the most active SnO(x)/Pt(111) surface for CO oxidation has smallest SnO(x) coverage. Increasing the surface coverage of SnO(x) reduces CO oxidation activity and eventually suppresses it altogether. The study suggests that reduced Sn(II)O, rather than Sn(IV)O(2), is responsible for surface CO oxidation. The occurrence of a non-CO oxidation reaction path involving reduced Sn(II)O species at higher SnO(x) coverages accounts for the decreased CO oxidation activity. From these results, we conclude that the efficacy of CO oxidation is strongly dependent on the availability of reduced tin oxide sites at the Pt-SnO(x) interface, as well as unique chemical properties of the SnO(x) nanoparticles.