Hydrogen-oxygen titration and carbon monoxide chemisorption for the measurement of supported palladium surface areas

Hydrogen-oxygen titration and carbon monoxide chemisorption of silica supported palladium have been investigated, using the pulse chromatographic technique. An excellent agreement between metal surface areas derived from both methods was observed.

---

H₂–O₂ . , .

     

Coadsorption of ethylene and oxygen on an iridium surface

It is established that the hydrocarbon coverage (0<1) formed at T<400 K on the Ir surface is oxidized upon oxygen exposures to CO and H₂O by an adsorption mechanism. Complete oxidation to CO₂ and H₂O is achieved at T350 K after C₂H₄ exposures of the oxygen coverage.

---

, (<1), T<400 K Ir, CO H₂O . CO₂ H₂O T350 K C₂H₄ .

     

Thermal research of montmorillonite synthetized from the oxides SiO2-Al2O3-MgO-CaO

The thermal behaviour of synthetic montmorillonite of relatively simple chemical composition has been studied and interpreted. Montmorillonite was prepared by hydrothermal synthesis at 300° and 8.8 MPa during 165 hours. With the methods of DTA, DTG, TG, X-ray diffraction analysis, infrared spectroscopy and electron microscopy it was proved that the synthetic montmorillonite is a monomineral sample and no differences from natural montmorillonite were observed.

---

Zusammenfassung Das thermische Verhalten synthetischer Montmorillonite verhältnismässig einfacher chemischer Zusammensetzung wurde untersucht und gedeutet. Montmorillonit wurde durch hydrothermische Synthese bei 300°C und 8.8 MPa in 165 Stunden hergestellt. Durch die Methoden der DTA, DTG, TG, Röntgendiffraktionsanalyse, Infrarotspektroskopie und Elektronenmikroskopie wurde erwiesen, daß synthetische Montmorillonit eine monominerale Probe ist und keine Abweichungen von natürlichem Montmorillonit beobachtet werden konnten.

---

. 165 300° 8.8 . , , , , , .

     

Monolayer vanadia on titania systems from alkoxide precursors. Part III. Activity in secondary alcohol oxidation

The activity of V⁵⁺ ion monolayer supported on anatase, rutile, and anatase-rutile mixed carrier and of bulk V₂O₅ was examined in isopropyl alcohol and cyclohexanol oxidation. Catalysts exhibited remarkable activity in ketone formation. At higher temperatures benzene was the predominant product of cyclohexanol reaction.

---

V⁵⁺, , - V₂O₅, . . .

     

Ru(III) catalyzed oxidation of some aliphatic alcohols by N-bromosuccinimide (NBS). A kinetic study

Kinetics of Ru(III) catalyzed oxidation of methanol, ethanol, n-propanol, n-butanol, isopropanol and iso-butanol by N-bromosuccinimide (NBS) in the presence of Hg(II) acetate have been studied in acid medium. The oxidation exhibits a fractional order in [alcohol] and first order in [NBS]. The applicability of Taft's equation was tested. The probable mechanism is discussed.

---

, , -, -, - () Hg(II), Ru(III), . . . .

     

Study of furan compounds

Research on synthesis of polycyclic spirans of the 1, 6-dioxaspiro-[4, 4]nonane group is continued. Electrolysis of methanol solutions of 2-furylcyclopentanol, 2-(5-methyl-furfuryl)cyclopentanol, and 2-furfuryl-1-indanol, gives, by intramolecular alkoxylation, spiro{perhydrocyclopenta[b]furan-2, 2-(5dihydrofuran)}, spiro{perhydrocyclopenta[b]furan-2, 2-(5-methoxy-5-methyl-2, 5-dihydrofuran)}, and spiro{2, 3, 3a, 8b-tetrahydro-4H-indeno[1, 2-b]furan-2, 2-(5-methoxy-2, 5-dihydrofuran)}, hitherto undescribed in the literature. Depending on the conditions, catalytic hydrogenation of these gives: spiro{perhydiocyclopenta[b]furan-2, 2-(5-methoxytetrahydrofuran)}, spiro{2, 3a, 8b-tetrahydro-4H-indeno[1, 2-b]furan-2, 2-(5-methoxytetrahydrofuran)}, spiro{perhydrocyclopenta[b]furan-2, 2-tetrahydrofuran}, and spiro{2, 3, 3a, 8b-tetrahydro-4H-indeno[1, 2-b]furan-2, 2-tetrahydrofuran}.For Part XXXI see [1].     

Certified reference materials for thermal analysis

Eight inorganic substances recommended by ICTA as temperature standard reference materials for DTA and DSC were studied: KNO₃, KClO₄, Ag₂SO₄, K₂CrO₄, quartz, K₂SO₄, BaCO₃ and SrCO₃. The content of pure component in each of these substances was determined by classical chemical analysis. The temperatures and the heats of polymorphic transformations of these substances were measured with a Perkin-Elmer DSC-2 differential scanning calorimeter, and DTA studies were performed on a MOM 1500 D Q-derivatograph. The plot heat of transformation by DSCvs. DTA peak area is advanced as a calibration line for the approximate estimation of quantitative DTA effects. The substances studied will be certified as temperature standard reference materials for use in DTA and DSC.

---

Zusammenfassung Acht von der ICTA als Temperaturstandard-Referenzmaterialien für DTA und DSC empfohlene und im Lande verfügbare Substanzen wurden untersucht: KNO₃,KClO₄, Ag₂SO₄, K₂Cr₂O₄, Quarz, K₂SO₄, BaCO₃ und SrCO₃. Der Gehalt der Substanzen an diesen Verbindungen wurde klassisch chemisch-analytisch bestimmt. Temperaturen und Enthalpien der polymorphen Umwandlungen wurden mit dem Gerät DSC 2 (Perkin-Elmer) bestimmt, DTA-Untersuchungen erfolgten mittels Derivatograph Q 1500 D (MOM). Eine Darstellung (Umwandlungsenthalpie aus DSC-Messung) über der DTA-peak-Flä-che wird als Eichgerade für die näherungsweise quantitative Bewertung der DTA-Effekte vorgeschlagen. Die genannten Substanzen sollen als Temperaturstandards für DTA und DSC geprüft werden.

---

(-, -, , , , , ), . . -2 -, Q- 1500 . ( ) — . .

     

Thermal and some other properties of the complexes crystallizing from the system Ni(II)-en-[Ni(CN)4]2−-H2O

Seven complex compounds exhibiting the compositions Ni(en)₃Ni(CN)₄·H₂O (I), Ni(en)₃Ni(CN)₄ (II),-Ni(en)₂Ni(CN)₄ (III), Ni(en)Ni(CN)₄·2H₂O (IV), Ni(en)Ni(CN)₄ (V), Ni(en)₂Ni(CN)₄ · 2.5H₂O (VI) and-Ni(en)₂Ni(CN)₄ (VII) were prepared from the system Ni-en-[Ni(CN)₄]^2–-H₂O. These compounds were examined by the methods of infrared spectroscopy, X-ray powder diffractometry, UV-VIS reflectance spectroscopy, and also by the measurement of magnetic moments. The thermal stability, the stoichiometry of thermal decomposition and the mutual transformations were investigated with a derivatograph. The reactions proceeding according to the following schemes were observed if the system was heated to appropriate temperature: (I)(II)(III)(V)(IV) and (VI)(VII)(III)(V)(IV) Process (VII)(III) represents isomerization. The reversibility of the process (V)(IV) is due to the high hygroscopicity of the anhydrous complex. The changes in structure in the course of the individual processes are discussed.

---

Zusammenfassung Aus einem System Ni-en-[Ni(CN)₄]^2–-H₂O wurden sieben Komplexe der Formeln Ni(en)₃Ni(CN)₄·H₂O (I), Ni(en)₃Ni(CN)₄ (II),-Ni(en)₂Ni(CN)₄ (III), Ni(en)Ni(CN)₄·2H₂O (IV), Ni(en)Ni(CN)₄ (V), Ni(en)₂Ni(CN)₄ · 2.5H₂O (VI) und-Ni(en)₂Ni(CN)₄ (VII) hergestellt. Diese Verbindungen wurden mittels IR-Spektroskopie, Röntgenpulverdiffraktometrie, UV-Reflexionsspektroskopie und durch Messungen des magnetischen Momentes untersucht. Die Wärmestabilität, die Stöchiometrie des thermischen Zerfalles und die gegenseitigen Umwandlungen wurden mittels eines Derivatographen untersucht. Wird das System auf geeignete Temperaturen erhitzt, kann der Reaktionsverlauf durch folgendes Schema dargestellt werden: (I)(II)(III)(V)(IV) und (VI)(VII)(III)(V)(IV).Der Prozeß (VII)(III) verkörpert eine Isomerisierung. Die Umkehrbarkeit von Prozeß (V)(IV) ist auf die ausgeprägten Hygroskopieeigenschaften des wasserfreien Komplexes zurückzuführen. Es werden die im Ablaufe der einzelnen Prozesse vorgehenden Strukturveränderungen besprochen.

---

Ni- -[No(N)]² -₂ Ni(en)₃Ni(CN)₄ · ₂ (I), Ni(en)₃Ni(CN)₄ (II),-Ni(en)₂Ni(CN)₄ (III), Ni(en)Ni(CN)₄-2H₂O (IV), Ni(en)Ni(CN)₄ (V), Ni(en)₂Ni(CN)₄ · 2,5H₂O (VI) -Ni(en)₂Ni(CN)₄ (VII). , , - , . , . (I)(II)(III)(V)(IV) (VI)(VII)(III)(V)(IV). (VII)(III) . (V)(IV) . .

     

Coke deposition on naphtha reforming catalysts: II. Influence of the addition of a second metal to platinum

The nature and rate of coke deposited on mono-and bimetallic reforming catalysts have been studied for normal heptane reforming. For bimetallic catalysts it has been shown that coke deposition is less extensive than on monometallic catalyst, depending on the degree of polymerization and the type of bimetallic catalyst.

---

-. , , , .

     

Synthesis of 2,3,7,8-tetramethyldibenzofuran

3,4,3,4-Tetramethyldiphenyl ether readily forms 2,2-dihalo derivatives on bromination and iodination. Heating 2,2-diiodo-4,5,4,5-tetramethyldiphenyl ether with copper powder or oxidation, of 2,2-dilithio-4,5,4,5-tetramethyldiphenyl ether gives 2,3,7,8-tetramethyldibenzofuran, the structure of which was proved by alternative synthesis from 2,2-dinitroand 2,2-diamino-4,5,4,5-tetramethyldiphenyls.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1597–1599, December, 1972.