Simultaneous spectrophotometric determination of phenanthridine, phenanthridinone and phenanthridine N-oxide using multivariate calibration methods

The multivariate calibration methods, partial least squares (PLS) and principle component regression (PCR) have been used to determine phenanthridine, phenanthridinone and phenanthridine N-oxide in spiked human plasma samples. Resolution of binary and ternary mixtures of analytes with minimum sample pre-treatment and without analyte separation has been successfully achieved analyzing the UV spectral data. The net analyte signal (NAS) concept was also used to calculate multivariate analytical figures of merit such as limit of detection, selectivity and sensitivity. The simultaneous determination of three analytes was possible by PLS and PCR processing of sample absorbance in the 210–355 nm region. Good recoveries were obtained for both synthetic mixtures and spiked human plasma samples.     

Selective removal of interference signals for near-infrared spectra of biomedical samples by using region orthogonal signal correction

New approach for chemometrics algorithm named region orthogonal signal correction (ROSC) has been introduced to improve the predictive ability of PLS models for biomedical components in blood serum developed from their NIR spectra in the 1280-1849 nm region. Firstly, a moving window partial least squares regression (MWPLSR) method was employed to locate the region due to water as a region of interference signals and to find the informative regions of glucose, albumin, cholesterol and triglyceride from NIR spectra of bovine serum samples. Next, a novel chemometrics method named searching combination moving window partial least squares (SCMWPLS) was used to optimize those informative regions. Then, the specific regions that contained the information of water, glucose, albumin, cholesterol and triglyceride were obtained. When an interested component in the bovine serum solution, such as glucose, albumin, cholesterol or triglyceride is being an analyte, the other three interests and water are considered as the interference factors. Thus, new approach for ROSC has employed for each specific region of interference signal to calculate the orthogonal components to the concentrations of analyte that were removed specifically from the NIR spectra of bovine serum in the region of 1280-1849 nm and the highest interference signal for model of analyte will be revealed. The comparison of PLS results for glucose, albumin, cholesterol and triglyceride built by using the whole region of original spectra and those developed by using the optimized regions suggested by SCMWPLS of original spectra, spectra treated OSC for orthogonal components of 1-3 and spectra treated ROSC using selected removing the highest interference signals from the spectra for orthogonal components of 1-3 are reported. It has been found that new approach of ROSC to remove the highest interference signal located by SCMWPLS improves of the performance of PLS modeling, yielding the lower RMSECV and smaller number of PLS factors.     

Removal of major interference sources in aqueous near-infrared spectroscopy techniques

This work describes a hybrid procedure for eliminating major interference sources in aqueous near-infrared (NIR) spectra, that include aqueous influence, noise, and systemic variations irrelevant to concentration. The scheme consists of two parts: extension of wavelet prism (WPe) and orthogonal signal correction (OSC). First, WPe is employed to remove variations due to aqueous absorbance and noise; then OSC is applied to remove systemic spectral variations irrelevant to concentration. Although water possesses strong absorption bands that overshadow and overlap the absorption bands of analytes, along with noise and systematic interference, successful calibration models can be generated by employing the method proposed here. We show that the elimination of major interference sources from the aqueous NIR spectra results in a substantial improvement in the precision of prediction, and reduces the required number of PLS components in the model. In addition, the strategy proposed here can be applied to various analytical data for quantitative purposes as well.     

Spectrophotometric simultaneous determination of cobalt, copper and nickel using nitroso-R-salt in alloys by partial least squares

Partial least squares modeling as a powerful multivariate statistical tool applied to spectrophotometric simultaneous determination of cobalt, copper, and nickel in aqueous solutions. The concentration range for cobalt, copper and nickel were 0.4-2.6, 0.6-3.4, 0.5-5.5 ppm, respectively. The experimental calibration set was composed with 36 sample solutions using a mixture design for three component mixtures. The absorption spectra were recorded from 470 to 600 nm. The effect of pH on the sensitivity and selectivity was studied according to net analyte signal (NAS). The values of root mean square difference (RMSD) for cobalt, copper and nickel using partial least squares (PLS) were 0.0192, 0.0263 and 0.0446 ppm, respectively. The effects of various cations and anions were investigated. The method was used to determination of cobalt, copper and nickel in two sample alloys based on copper, nickel and cobalt (known as cunico) and based on cobalt, nickel and iron (known as conife).     

Selectivity for glucose,glucose-6-phosphate,and pyruvate in ternary mixtures from the multivariate analysis of near-infrared spectra

Near-infrared spectroscopy offers the potential for direct in situ analysis in complex biological systems. Chemical selectivity is a critical issue for such measurements given the extent of spectral overlap of overtone and combination spectra. In this work, the chemical basis of selectivity is investigated for a set of multivariate calibration models designed to quantify glucose, glucose-6-phosphate, and pyruvate independently in ternary mixtures. Near-infrared spectra are collected over the combination region (4,000–5,000 cm⁻¹) for a set of 60 standard solutions maintained at 37 °C. These standard solutions are composed of randomized concentrations (0.5–30 mM) of glucose, glucose-6-phosphate, and pyruvate. Individual calibration models are constructed for each solute by using the partial least-squares (PLS) algorithm with optimized spectral range and number of latent variables. The resulting standard errors are 0.90, 0.72, and 0.32 mM for glucose, glucose-6-phosphate, and pyruvate, respectively. A pure component selectivity analysis (PCSA) demonstrates selectivity for each solute in these ternary samples. The concentration of each solute is also predicted for each sample by using a set of net analyte signal (NAS) calibration models. A comparison of the PLS and NAS calibration vectors demonstrates the chemical basis of selectivity for these multivariate methods. Selectivity of each PLS and NAS calibration model originates from the unique spectral features associated with the targeted analyte. Overall, selectivity is demonstrated for each solute with an order of sensitivity of pyruvate > glucose-6-phosphate > glucose. Figure Combination near-infrared spectroscopy allows selective analytical measurements for glucose, glucose-6-phosphate, and pyruvate in ternary mixtures owing to the uniqueness of the individual absorption spectra for each solute     

近红外光谱测定人参与西洋参的主要皂甙总量

采用近红外光谱测定人参与西洋参的主要皂甙总量.采集人参与西洋参的漫反射光谱,分别对光谱进行正交信号校正(OSC)与常规预处理,建立了对应的偏最小二乘(PLS)回归模型.与常规最优预处理方法相比,OSC能很好地消除人参与西洋参的品种差异,显著提高了光谱与皂甙含量的相关系数,同时降低了PLS建模因子数,提高了模型的稳健性与...     

Multi-analyte quantification in bioprocesses by Fourier-transform-infrared spectroscopy by partial least squares regression and multivariate curve resolution

This paper presents the quantification of Penicillin V and phenoxyacetic acid, a precursor, inline during Pencillium chrysogenum fermentations by FTIR spectroscopy and partial least squares (PLS) regression and multivariate curve resolution – alternating least squares (MCR-ALS). First, the applicability of an attenuated total reflection FTIR fiber optic probe was assessed offline by measuring standards of the analytes of interest and investigating matrix effects of the fermentation broth. Then measurements were performed inline during four fed-batch fermentations with online HPLC for the determination of Penicillin V and phenoxyacetic acid as reference analysis. PLS and MCR-ALS models were built using these data and validated by comparison of single analyte spectra with the selectivity ratio of the PLS models and the extracted spectral traces of the MCR-ALS models, respectively. The achieved root mean square errors of cross-validation for the PLS regressions were 0.22 g L⁻¹ for Penicillin V and 0.32 g L⁻¹ for phenoxyacetic acid and the root mean square errors of prediction for MCR-ALS were 0.23 g L⁻¹ for Penicillin V and 0.15 g L⁻¹ for phenoxyacetic acid. A general work-flow for building and assessing chemometric regression models for the quantification of multiple analytes in bioprocesses by FTIR spectroscopy is given.     

Determination of carbendazim, thiabendazole and fuberidazole using a net analyte signal-based method

The net analyte signal (NAS)-based method HLA/GO, modification of the original hybrid linear analysis (HLA) method, has been used to determine carbendazim, fuberidazole and thiabendazole in water samples. This approach was used after a solid-phase extraction (SPE) step, using the native fluorescence emission spectra of real samples, previously standardized by piecewise direct standardization (PDS). The results obtained show that the modification of HLA performs in a similar way that partial least-squares method (PLS-1). The NAS concept was also used to calculate multivariate analytical figures of merit such as limit of detection, selectivity, sensitivity and analytical sensitivity (γ⁻¹). With this purpose, blanks of methanol and ternary mixtures, with the target analyte at low concentration and the other two ranging according to the calibration matrix, were used, with different results. Detection limits calculated in the last way are more realistic and show the influence of the other components in the sample. Selectivity for carbendazim is higher than the corresponding values for fuberidazole and thiabendazole, whereas sensitivity, as well as the values obtained for their detection limits, are lower for carbendazim, followed by thiabendazole and fuberidazole. Results obtained by modification of HLA vary in the same way that the ones obtained by PLS-1.     

Net analyte signal-based simultaneous determination of ethanol and water by quartz crystal nanobalance sensor

Net analyte signal (NAS)-based method called HLA/GO was applied for the selectively determination of binary mixture of ethanol and water by quartz crystal nanobalance (QCN) sensor. A full factorial design was applied for the formation of calibration and prediction sets in the concentration ranges 5.5-22.2 μg mL⁻¹ for ethanol and 7.01-28.07 μg mL⁻¹ for water. An optimal time range was selected by procedure which was based on the calculation of the net analyte signal regression plot in any considered time window for each test sample. A moving window strategy was used for searching the region with maximum linearity of NAS regression plot (minimum error indicator) and minimum of PRESS value. On the base of obtained results, the differences on the adsorption profiles in the time range between 1 and 600 s were used to determine mixtures of both compounds by HLA/GO method. The calculation of the net analytical signal using HLA/GO method allows determination of several figures of merit like selectivity, sensitivity, analytical sensitivity and limit of detection, for each component. To check the ability of the proposed method in the selection of linear regions of adsorption profile, a test for detecting non-linear regions of adsorption profile data in the presence of methanol was also described. The results showed that the method was successfully applied for the determination of ethanol and water.     

Simultaneous determination of vitamin B12 and its derivatives using some of multivariate calibration 1 (MVC1) techniques

Resolution of binary mixtures of vitamin B12, methylcobalamin and B12 coenzyme with minimum sample pre-treatment and without analyte separation has been successfully achieved by methods of partial least squares algorithm with one dependent variable (PLS1), orthogonal signal correction/partial least squares (OSC/PLS), principal component regression (PCR) and hybrid linear analysis (HLA). Data of analysis were obtained from UV-vis spectra. The UV-vis spectra of the vitamin B12, methylcobalamin and B12 coenzyme were recorded in the same spectral conditions. The method of central composite design was used in the ranges of 10-80mgL(-1) for vitamin B12 and methylcobalamin and 20-130mgL(-1) for B12 coenzyme. The models refinement procedure and validation were performed by cross-validation. The minimum root mean square error of prediction (RMSEP) was 2.26mgL(-1) for vitamin B12 with PLS1, 1.33mgL(-1) for methylcobalamin with OSC/PLS and 3.24mgL(-1) for B12 coenzyme with HLA techniques. Figures of merit such as selectivity, sensitivity, analytical sensitivity and LOD were determined for three compounds. The procedure was successfully applied to simultaneous determination of three compounds in synthetic mixtures and in a pharmaceutical formulation.     

Comparative study of net analyte signal-based methods and partial least squares for the simultaneous determination of amoxycillin and clavulanic acid by stopped-flow kinetic analysis

A comparative study about advantages and limitations of net analyte signal (NAS)-based methods (NBMs) and partial least squares (PLS) calibration in kinetic analysis has been performed. The different multivariate calibration methods were applied to the determination of binary mixtures of amoxycillin and clavulanic acid, by stopped-flow kinetic analysis. The reactions of oxidation of these compounds with cerium(IV), in sulphuric acid medium, were monitored by following the changes on the fluorescence of the oxidation products, in stopped-flow mode. The differences on the kinetic profiles obtained at λ_ex=256 nm and λ_em=351 nm, were used to determine mixtures of both compounds by multivariate calibration of the kinetic data, using PLS-1, a modification of hybrid linear analysis (HLA) and net analyte pre-processing combined with classical least squares (NAP/CLS) methods. The NBMs allowed the selection of optimal time data regions by calculating the minimum error indicator function (EIF), improving the results and making NBMs very convenient for the analysis. In addition, the use of the net analyte signal concept allows the calculation of the analytical figures of merit, limit of detection (LOD), sensitivity and selectivity, for each component.     

Optical coefficient‐based multivariate calibration on near‐infrared spectroscopy

The time and expense of calibration development limit the feasibility of NIR spectroscopy for many industrial applications, with a major portion of the costs being related to creation of a sufficient set of calibration samples. Net analyte signal (NAS) and generalized least squares (GLS) pre‐processing have been proposed in the literature as methods to simplify multivariate calibration by reducing the quantity of calibration samples by orthogonalizing or shrinking interference signals. Synthetic calibration has also been reported as a method to combine interference signals with pure component spectra to generate virtual calibration models, thereby reducing the number of real calibration samples required. The goals of this paper were to (1) compare theoretical and practical differences between NAS and GLS pre‐processing and (2) explore the potential of simplified NIR calibrations, both empirical and synthetic, constructed using optical coefficient‐based signal processing on predicting chemical compositions of pharmaceutical powder mixtures. A reduced calibration dataset including only one pharmaceutical powder mixture composition and pure component spectra was used for both empirical and synthetic calibrations. Absorption and reduced scattering coefficients, obtained from spatially‐resolved spectroscopy, were used herein as interference signals in NAS/GLS pre‐processing for both calibrations. As a result, NAS and GLS were shown to be equivalent in both theoretical and practical senses. After optical coefficient‐based signal processing, simplified calibrations, both empirical and synthetic, were demonstrated to have similar model performance as generic pre‐processing methods such as SNV and derivative, while requiring fewer principal components and achieving a lower prediction error. Copyright © 2010 John Wiley & Sons, Ltd.     

Sorting variables by using informative vectors as a strategy for feature selection in multivariate regression

A new procedure with high ability to enhance prediction of multivariate calibration models with a small number of interpretable variables is presented. The core of this methodology is to sort the variables from an informative vector, followed by a systematic investigation of PLS regression models with the aim of finding the most relevant set of variables by comparing the cross‐validation parameters of the models obtained. In this work, seven main informative vectors i.e. regression vector, correlation vector, residual vector, variable influence on projection (VIP), net analyte signal (NAS), covariance procedures vector (CovProc), signal‐to‐noise ratios vector (StN) and their combinations were automated and tested with the main purpose of feature selection. Six data sets from different sources were employed to validate this methodology. They originated from: near‐Infrared (NIR) spectroscopy, Raman spectroscopy, gas chromatography (GC), fluorescence spectroscopy, quantitative structure‐activity relationships (QSAR) and computer simulation. The results indicate that all vectors and their combinations were able to enhance prediction capability with respect to the full data sets. However, regression and NAS informative vectors from partial least squares (PLS) regression, both built using more latent variables than when building the model presented in most of tested data sets, were the best informative vectors for variable selection. In all the applications, the selected variables were quite effective and useful for interpretation. Copyright © 2008 John Wiley & Sons, Ltd.     

基于OSC–WT–PLS近红外光谱法测定烟草中芸香苷

采用正交信号校正(OSC)结合小波变换(WT)对烟草光谱进行光谱预处理,将预处理后的烟草光谱结合偏最小二乘法(PLS)建立了烟草光谱对芸香苷的预测模型。利用OSC滤除光谱中与芸香苷含量无关的光谱信息,确定OSC提取的最佳主成分数为7,再选择WT中的最佳小波基函数bior1.1对OSC预处理后的光谱进行压缩及进一步滤噪,然后进行PLS建模,OSC–WT–PLS所建模型决定系数r~2=0.874,校正标准偏差RMSEC=0.85,预测均方根误差RMSEP=0.743,交互验证系数Q_(ext)~2=0.887。结果表明,用OSC–WT–PLS可滤除光谱信息中与待测样品含量无关的信息、减少光谱数据量,降低建立模型的复杂度、提高建模速度及模型的预测能力、准确度。     

Melamine detection by mid- and near-infrared (MIR/NIR) spectroscopy: a quick and sensitive method for dairy products analysis including liquid milk, infant formula, and milk powder

Melamine (2,4,6-triamino-1,3,5-triazine) is a nitrogen-rich chemical implicated in the pet and human food recalls and in the global food safety scares involving milk products. Due to the serious health concerns associated with melamine consumption and the extensive scope of affected products, rapid and sensitive methods to detect melamine's presence are essential. We propose the use of spectroscopy data-produced by near-infrared (near-IR/NIR) and mid-infrared (mid-IR/MIR) spectroscopies, in particular—for melamine detection in complex dairy matrixes. None of the up-to-date reported IR-based methods for melamine detection has unambiguously shown its wide applicability to different dairy products as well as limit of detection (LOD) below 1 ppm on independent sample set. It was found that infrared spectroscopy is an effective tool to detect melamine in dairy products, such as infant formula, milk powder, or liquid milk. ALOD below 1 ppm (0.76 ± 0.11 ppm) can be reached if a correct spectrum preprocessing (pretreatment) technique and a correct multivariate (MDA) algorithm—partial least squares regression (PLS), polynomial PLS (Poly-PLS), artificial neural network (ANN), support vector regression (SVR), or least squares support vector machine (LS-SVM)—are used for spectrum analysis. The relationship between MIR/NIR spectrum of milk products and melamine content is nonlinear. Thus, nonlinear regression methods are needed to correctly predict the triazine-derivative content of milk products. It can be concluded that mid- and near-infrared spectroscopy can be regarded as a quick, sensitive, robust, and low-cost method for liquid milk, infant formula, and milk powder analysis.     

Simultaneous determination of copper, nickel, cobalt and zinc using zincon as a metallochromic indicator with partial least squares

The partial least squares (PLS) applied to the simultaneous determination of the divalent ions of copper, nickel, cobalt and zinc based on the formation of their complexes with 2-carboxy-2′-hydroxy-5′-sulfoformazyl benzene (zincon). The absorption spectra were recorded from 515 through 750 nm. The effect of pH on sensitivity and the selectivity was studied in the range 3.0-10.0 and the pH 8.0 was choused according to net analyte signal (NAS) as a function of pH. The concentration range for Cu²⁺, Ni²⁺, Co²⁺and Zn²⁺ in solution calibration sets were 0-2.6, 0-4.6, 0-3.0 and 0-4.92 ppm, respectively. The root mean squares differences (RMSD) for copper, nickel, cobalt and zinc were 0.0181, 0.0488, 0.0309 and 0.0463, respectively.     

Improving the sensitivity of NIR spectroscopy with an enrichment technique: determining a trace analyte of ethyl carbamate.

An exploration was made to develop a determination method of a low-concentration analyte by NIR spectroscopy. An absorber, silica gel was employed to extract and enrich a low-concentration analyte of ethyl carbamate. The solid absorber with the enriched analyte was measured by NIR spectroscopy in the range of 800 - 2500 nm. Afterwards, PLS regression was performed between the NIR spectra and the concentrations of the analyte for quantitative analysis of the low-concentration analyte. The spectra of 20 solid samples of analyte-absorbed silica gel showed a good correlation with the concentrations of ethyl carbamate in the samples. A leave-one-out cross validation was applied to evaluate the prediction ability of PLS models built with the full spectra, spectra in the region of 1920 - 1970 nm and the region of 2250 - 2430 nm, respectively. The values of the root-mean-square error of the cross validation (RMSECV) were about 0.1 mg L(-1) (0.1 ppm).     

Allylated cyclodextrins as effective affinity materials in chemical sensing of volatile aromatic hydrocarbons using an optical planar Bragg grating sensor

We report on the application of perallyl-substituted α-, β- and γ-cyclodextrins to an optical planar Bragg grating refractive index sensor for the effective sensitization of the sensor for airborne volatile aromatic hydrocarbons. Thereby, the emphasis of this work lies on the comparison of the different cyclodextrin types regarding their suitability as affinity material assessed by the sensors sensitivity and response behavior. The opto-chemical sensor device showed an immediate and quick response to the application of the investigated analytes benzene, toluene and m-xylene as well as a linear dependence on the concentration of those analytes. Studies on the sensors sensitivity depending on the applied cyclodextrin types revealed a generally higher sensitivity for the sensor sensitized with perallyl-substituted β-cyclodextrins. Here, the sensor systems detection limit was found to 60 ± 4 ppm for benzene, 18 ± 3 ppm for toluene and 3.8 ± 0.5 ppm for m-xylene. The response time and recovery time were found to approximately 30 s and 40 s, respectively, depending on the applied cyclodextrin and the chosen analyte.     

Combining orthogonal signal correction and wavelet packet transform with partial least squares to analyze overlapping spectra of three kinds of metal ions

A novel method named OSC-WPT-PLS approach based on partial least squares (PLS) regression with orthogonal signal correction (OSC) and wavelet packet transform (WPT) as pre-processed tools was proposed for the simultaneous spectrophotometric determination of Al(III), Mn(II) and Co(II). This method combines the ideas of OSC and WPT with PLS regression for enhancing the ability of extracting characteristic information and the quality of regression. OSC is used to remove information in the response matrix D by subtracting the structured noise that is orthogonal to the concentration matrix C. Wavelet packet transform was applied to perform data compression, to extract relevant information, and to eliminate noise and collinearity. PLS was applied for multivariate calibration and noise reduction by eliminating the less important latent variables. In this case, using trials, the kind of wavelet function, the decomposition level, the number of OSC components and the number of PLS factors for the OSC-WPT-PLS method were selected as Daubechies 4, 3, 2 and 3, respectively. A program (POSCWPTPLS) was designed to perform the simultaneous spectrophotometric determination of Al(III), Mn(II) and Co(II). The relative standard errors of prediction (RSEP) obtained for total elements using OSC-WPT-PLS, WPT-PLS and PLS were compared. Experimental results demonstrated that the OSC-WPT-PLS method had the best performance among the three methods and was successful even when there was severe overlap of spectra.     

Determination of terpenes in humid ambient air using ultraviolet ion mobility spectrometry

Atmospheric humidity causes the major problem using ion mobility spectrometers (IMS) under ambient conditions. Significant changes of the spectra are decreasing sensitivity as well as selectivity. Therefore, the influence of humidity on the IMS signal was investigated in case of direct introduction of the analyte into the ionisation chamber and in case of pre-separation by help of a multi-capillary column (MCC). For direct analyte introduction, a significant decrease of the total number of ions in the range of 28-42% with increasing relative humidity was found. Simultaneously additional peaks in the spectra were formed, thus complicating the identification of the analytes. In case of pre-separation of the analyte, the spectra do not change with increasing relative humidity, due to the successive appearance of the analyte and the water molecules in the ionisation chamber. Detection limits were found in the range of 5 μg/m³ (about 1 ppbv) for selected terpenes and—with pre-separation—independent on relative humidity of the analyte. Without pre-separation, detection limits are in the same range for dry air as carrier gas but in the range of 200-600 μg/m³ when relative humidity reaches 100%. Thus, MCC-UV ion mobility spectrometry is optimally capable for the detection of trace substances in ambient air (e.g. indoor air quality control, process control, odour detection) without further elaborate treatment of the carrier gas containing the analyte and independent on relative humidity.