Understanding the reactivity and basicity of zeolites: a periodic DFT study of the disproportionation of N(2)O(4) on alkali-cation-exchanged zeolite Y

The disproportionation of N(2)O(4) into NO(3)(-) and NO(+) on Y zeolites has been studied through periodic DFT calculations to unravel 1) the role of metal cations and the framework oxygen atoms and 2) the relationship between the NO(+) stretching frequency and the basicity of zeolites. We have considered three situations: adsorption on site II cations with and without a cation at site III and adsorption on a site III cation. We observed that cations at sites II and III cooperate to stabilize N(2)O(4) and that the presence of a cation at site III is necessary to allow the disproportionation reaction. The strength of the stabilization is due to the number of stabilizing interactions increasing with the size of the cation and to the Lewis acidity of the alkali cations, which increases as the size of the cations decreases. In the product, NO(3)(-) interacts mainly with the cations and NO(+) with the basic oxygen atoms of the tetrahedral aluminium through its nitrogen atom. As the cation size increases, the NO(3)(-)...cation interaction increases. As a result, the negative charge of the framework is less well screened by the larger cations and the interaction between NO(+) and the basic oxygen atoms becomes stronger. NO(+) appears to be a good probe of zeolite basicity, in agreement with experimental observations.     

Alkaline earth chloride hydrates: chlorine quadrupolar and chemical shift tensors by solid-state NMR spectroscopy and plane wave pseudopotential calculations

A series of alkaline earth chloride hydrates has been studied by solid-state (35/37)Cl NMR spectroscopy in order to characterize the chlorine electric field gradient (EFG) and chemical shift (CS) tensors and to relate these observables to the structure around the chloride ions. Chlorine-35/37 NMR spectra of solid powdered samples of pseudopolymorphs (hydrates) of magnesium chloride (MgCl(2).6H(2)O), calcium chloride (CaCl(2).2H(2)O), strontium chloride (SrCl(2), SrCl(2).2H(2)O, and SrCl(2).6H(2)O), and barium chloride (BaCl(2).2H(2)O) have been acquired under stationary and magic-angle spinning conditions in magnetic fields of 11.75 and 21.1 T. Powder X-ray diffraction was used as an additional tool to confirm the purity and identity of the samples. Chlorine-35 quadrupolar coupling constants (C(Q)) range from essentially zero in cubic anhydrous SrCl(2) to 4.26+/-0.03 MHz in calcium chloride dihydrate. CS tensor spans, Omega, are between 40 and 72 ppm, for example, Omega= 45+/-20 ppm for SrCl(2).6H(2)O. Plane wave-pseudopotential density functional theory, as implemented in the CASTEP program, was employed to model the extended solid lattices of these materials for the calculation of their chlorine EFG and nuclear magnetic shielding tensors, and allowed for the assignment of the two-site chlorine NMR spectra of barium chloride dihydrate. This work builds upon our current understanding of the relationship between chlorine NMR interaction tensors and the local molecular and electronic structure, and highlights the particular sensitivity of quadrupolar nucleus solid-state NMR spectroscopy to the differences between various pseudopolymorphic structures in the case of strontium chloride.     

Properties of alkali metal atoms deposited on a MgO surface: a systematic experimental and theoretical study

The adsorption of small amounts of alkali metal atoms (Li, Na, K, Rb, and Cs) on the surface of MgO powders and thin films has been studied by means of EPR spectroscopy and DFT calculations. From a comparison of the measured and computed g values and hyperfine coupling constants (hfccs), a tentative assignment of the preferred adsorption sites is proposed. All atoms bind preferentially to surface oxide anions, but the location of these anions differs as a function of the deposition temperature and alkali metal. Lithium forms relatively strong bonds with MgO and can be stabilized at low temperatures on terrace sites. Potassium interacts very weakly with MgO and is stabilized only at specific sites, such as at reverse corners where it can interact simultaneously with three surface oxygen atoms (rubidium and cesium presumably behave in the same way). Sodium forms bonds of intermediate strength and could, in principle, populate more than a single site when deposited at room temperature. In all cases, large deviations of the hfccs from the gas-phase values are observed. These reductions in the hfccs are due to polarization effects and are not connected to ionization of the alkali metal, which would lead to the formation of an adsorbed cation and a trapped electron. In this respect, hydrogen atoms behave completely differently. Under similar conditions, they form (H(+))(e(-)) pairs. The reasons for this different behavior are discussed.     

Construction of titanasiloxanes by incorporation of silanols to the metal oxide model [(Ti(eta 5-C5Me5)(mu-O))3(mu3-CR)]: DFT elucidation of the reaction mechanism

A family of novel titanasiloxanes containing the structural unit {[Ti(eta(5)-C(5)Me(5))O](3)} were synthesized by hydron-transfer processes involving reactions with equimolecular amounts of mu(3)-alkylidyne derivatives [{Ti(eta(5)-C(5)Me(5))(mu-O)}(3)(mu(3)-CR)] (R=H (1), Me (2)) and monosilanols, R(3)'Si(OH), silanediols, R(2)'Si(OH)(2), and the silanetriol tBuSi(OH)(3). Treatment of 1 and 2 with triorganosilanols (R'=Ph, iPr) in hexane affords the new metallasiloxane derivatives [{Ti(eta(5)-C(5)Me(5))(mu-O)}(3)(mu-CHR)(OSiR(3)')] (R=H, R'=Ph (3), iPr (4); R=Me, R'=Ph (5), iPr (6)). Analogous reactions with silanediols, (R'=Ph, iPr), give the cyclic titanasiloxanes [{Ti(eta(5)-C(5)Me(5))(mu-O)}(3)(mu-O(2)SiR'(2))(R)] (R=Me, R'=Ph (7), iPr (8); R=Et, R'=Ph (9), iPr (10)). Utilization of tBuSi(OH)(3) with 1 or 2 at room temperature produces the intermediate complexes [{Ti(eta(5)-C(5)Me(5)) (mu-O)}(3)(mu-O(2)Si(OH)tBu)(R)] (R=Me (11), Et(12)). Further heating of solutions of 11 or 12 affords the same compound with an adamantanoid structure, [{Ti(eta(5)-C(5)Me(5))(mu-O)}(3)(mu-O(3)SitBu)] (13) and methane or ethane elimination, respectively. The X-ray crystal structures of 3, 4, 6, 8, 10, 12, and 13 have been determined. To gain an insight into the mechanism of these reactions, DFT calculations have been performed on the incorporation of monosilanols to the model complex [{Ti(eta(5)-C(5)H(5))(mu-O)}(3)(mu(3)-CMe)] (2 H). The proposed mechanism consists of three steps: 1) hydron transfer from the silanol to one of the oxygen atoms of the Ti(3)O(3) ring, forming a titanasiloxane; 2) intramolecular hydron migration to the alkylidyne moiety; and 3) a mu-alkylidene ligand rotation to give the final product.     

2D and 3D alkaline earth metal carboxyphosphonate hybrids: Anti-corrosion coatings for metal surfaces

Reactions of Mg²⁺ (1), Ca²⁺ (2), Sr²⁺ (3), or Ba²⁺ (4) salts with hydroxyphosphonoacetic acid (HPAA) at a 1:1 ratio yield M-HPAA layered coordination polymers. The crystal structures of 3 (two phases) and 4 have been determined by single crystal X-ray crystallography. Both stereoisomers (R and S) of HPAA are incorporated in the metal-HPAA materials. Synergistic combinations of Sr²⁺ or Ba²⁺ and HPAA at pH 7.3 are effective corrosion inhibitors for carbon steel, but are ineffective at pH 2.0.     

碱土金属掺杂对钴基尖晶石复合金属氧化物催化分解N_2O性能的影响

采用共沉淀法制备碱土金属掺杂的钴基尖晶石型复合金属氧化物M_xCo_(3-x)O_4(M=Mg、Ca、Sr、Ba;x=0、0.1、0.3、0.5、0.7、0.9)催化剂,使用XRD、SEM、氮吸附、H_2-TPR、O_2-TPD-M S和XPS等技术对催化剂进行表征,并在固定床微型反应器中评价了M_xCo_(3-x)O_4催化剂催化分解N_2O的活性,研究了碱土金属掺杂对其催化性能的影响。结果表明,碱土金属掺杂后,M_(x )Co_(3-x)O_4催化剂颗粒粒径减小,比表面积增大,表面吸附氧和Co~(2+)数量增加,氧化还原性能增强;在反应气组成为0.68%N_2O,3%O_2,Ar为平衡气的条件下,碱土金属锶掺杂、掺杂量x为0.7时,Sr_(0.7)Co_(2.3)O_4的N_2O分解催化活性最高,N_2O转化率为10%和95%时所需的温度分别为312和451℃。     

Heavy Grignard reagents: challenges and possibilities of aryl alkaline earth metal compounds

Compounds of the type aryl--M--X, with M=Ca, Sr, Ba and X as any kind of ligand (such as halide, phosphanide, amide, aryl), are presented. The low reactivity of the heavy alkaline earth metals calcium, strontium, and barium enforces an activation prior to use for the direct synthesis. The insertion of these metals into C--I bonds of aryl iodides (direct synthesis) yields aryl metal iodides and has to be performed at low temperatures and in THF. Aryl alkaline-earth-metal compounds show some characteristics: 1) the ease of ether cleavage enforces low reaction temperatures, 2) for Sr and Ba the Schlenk equilibrium is shifted towards homoleptic MI2 and MPh2, 3) high solubility of diaryl alkaline-earth-metal derivatives in THF even at low temperatures initiated quantum chemical investigations on the aggregation behavior, and 4) a strong low field shift of the 13C resonances of the ipso carbon atoms in NMR spectra was observed. First results from quantum chemical calculations on diaryl dicalcium(I) suggest a long Ca--Ca bond with a considerable Ca--Ca bond dissociation energy. Initial results on a selection of applications such as metallation, metathesis, and addition reactions of aryl calcium compounds are presented as well.     

σ‐Insertive Mechanism versus Concerted Non‐insertive Mechanism in the Intramolecular Hydroamination of Aminoalkenes Catalyzed by Phenoxyamine Magnesium Complexes: A Synthetic and Computational Study

The phenoxyamine magnesium complexes [{ONN}MgCH₂Ph] ( 4 a : {ONN}=2,4‐tBu₂‐6‐(CH₂NMeCH₂CH₂NMe₂)C₆H₂O^?; 4 b : {ONN}=4‐tBu‐2‐(CH₂NMeCH₂CH₂NMe₂)‐6‐(SiPh₃)C₆H₂O^?) have been prepared and investigated with respect to their catalytic activity in the intramolecular hydroamination of aminoalkenes. The sterically more shielded triphenylsilyl‐substituted complex 4 b exhibits better thermal stability and higher catalytic activity. Kinetic investigations using complex 4 b in the cyclisation of 1‐allylcyclohexyl)methylamine ( 5 b ), respectively, 2,2‐dimethylpent‐4‐en‐1‐amine ( 5 c ), reveal a first‐order rate dependence on substrate and catalyst concentration. A significant primary kinetic isotope effect of 3.9±0.2 in the cyclisation of 5 b suggests significant N?H bond disruption in the rate‐determining transition state. The stoichiometric reaction of 4 b with 5 c revealed that at least two substrate molecules are required per magnesium centre to facilitate cyclisation. The reaction mechanism was further scrutinized computationally by examination of two rivalling mechanistic pathways. One scenario involves a coordinated amine molecule assisting in a concerted non‐insertive N?C ring closure with concurrent amino proton transfer from the amine onto the olefin, effectively combining the insertion and protonolysis step to a single step. The alternative mechanistic scenario involves a reversible olefin insertion step followed by rate‐determining protonolysis. DFT reveals that a proton‐assisted concerted N?C/C?H bond‐forming pathway is energetically prohibitive in comparison to the kinetically less demanding σ‐insertive pathway (ΔΔG^≠=5.6 kcal mol^?1). Thus, the σ‐insertive pathway is likely traversed exclusively. The DFT predicted total barrier of 23.1 kcal mol^?1 (relative to the {ONN}Mg pyrrolide catalyst resting state) for magnesium?alkyl bond aminolysis matches the experimentally determined Eyring parameter (ΔG^≠=24.1(±0.6) kcal mol^?1 (298 K)) gratifyingly well.     

Experimental and theoretical investigation of the room-temperature photoluminescence of amorphized Pb(Zr,Ti)O3.

Ultrafine PbZr0.20Ti0.80O3 was amorphized through high-energy mechanical milling. The structural evolution through the amorphization process was accompanied by various characterization techniques, such as X-ray diffraction, Fourier-transformed IR spectroscopy (FTIR), high-resolution transmission electron microscopy (HR-TEM), and Raman spectroscopy. A strong photoluminescence was measured at room temperature for amorphized PbZr0.20Ti0.80O3, and interpreted by means of high-level quantum mechanical calculations in the density functional theory framework. Three periodic models were used to represent the crystalline and amorphized PbZr0.20Ti0.80O3, and they allowed the calculation of electronic properties that are consistent with the experimental data and that explain the appearance of photoluminescence.     

A DFT study of the adsorption and dissociation of CO on Fe(100): influence of surface coverage on the nature of accessible adsorption states.

In the present article, we report adsorption energies, structures, and vibrational frequencies of CO on Fe(100) for several adsorption states and at three surface coverages. We have performed a full analysis of the vibrational frequencies of CO, thus determining what structures are stable adsorption states and characterizing the transition-state structure for CO dissociation. We have calculated the activation energy of dissociation of CO at 0.25 ML (ML = monolayers) as well as at 0.5 ML; we have studied the dissociation at 0.5 ML to quantify the destabilization effect on the CO(alpha3) molecules when a neighboring CO molecule dissociates. In addition, it is shown that the number and nature of likely adsorption states is coverage dependent. Evidence is presented that shows that the CO molecule adsorbs on Fe(100) at fourfold hollow sites with the molecular axis tilted away from the surface normal by 51.0 degrees. The asorprton energy of the CO molecule is -2.54 eV and the C-O stretching frequency is 1156 cm(-1). This adsorption state corresponds to the alpha3 molecular desorption state reported in temperature programmed desorption (TPD) experiments. However, the activation energy of dissociation of CO(alpha3) molecules at 0.25 ML is only 1.11 eV (approximately 25.60 kcal mol(-1)) and the gain in energy is -1.17 eV; thus, the dissociation of CO is largely favored at low coverages. The activation energy of dissociation of CO at 0.5 ML is 1.18 eV (approximately 27.21 kcal mol(-1)), very similar to that calculated at 0.25 ML. However, the dissociation reaction at 0.5 ML is slightly endothermic, with a total change in energy of 0.10 eV Consequently, molecular adsorption is stabilized with respect to CO dissociation when the CO coverage is increased from 0.25 to 0.5 ML.     

Solvent/base effects in the selective domino synthesis of phenanthridinones that involves high-valent palladium species: experimental and theoretical studies

The domino reaction of o-bromobenzamides 1a-m in the presence of K(2)CO(3) and the [PdCl(2)(PPh(3))(2)] catalyst granted a selective access to phenanthridinones 2 or to the new 1-carboxamide phenanthridinones 3 depending on the solvent, DMF or 1,4-dioxane, respectively. Investigations of the reaction parameters provided the first example of a direct correlation between the base dissociation and the solvent polarity on the selectivity observed. Moreover, mechanistic studies (NMR spectroscopy and ESI-MS monitoring) allowed us to characterize Pd(II) palladacycle 4 and biaryl species as common intermediates for these two domino processes. On that basis, C(sp(2))-C(sp(2)) bond formation is envisaged by generation of a Pd(IV) complex after oxidative addition of 1 into Pd(II) palladacycle 4, a rationale that is supported by DFT calculations. A general catalytic cycle is proposed to account for these observations.     

Triazole, benzotriazole, and naphthotriazole as copper corrosion inhibitors: I. Molecular electronic and adsorption properties

The gas-phase adsorption of 1,2,3-triazole, benzotriazole, and naphthotriazole-considered as corrosion inhibitors-on copper surfaces was studied and characterized using density functional theory (DFT) calculations. We find that the molecule-surface bond strength increases with increasing molecular size, thus following the sequence: triazole相似文献   

燃烧过程中碱/碱土金属对重金属迁移转化影响的研究进展

碱/碱土金属广泛存在于各种固体燃料中，在燃烧过程中碱/碱土金属与燃料中重金属及其他矿物发生复杂的物理化学反应，从而影响重金属的迁移和转化。本研究主要介绍了碱/碱土金属对As、Se、Pb和Cr四种重金属迁移转化的影响规律，包括碱金属和碱土金属对重金属迁移转化的影响，颗粒物团聚与黏结对重金属排放的影响三个方面。碱/碱土金属能够抑制重金属的挥发：碱金属与Cl元素的结合，降低了PbCl₂的生成；碱金属的存在有利于提升高岭土对Pb的吸附效率；碱/碱土金属可以与As和Se形成稳定的化合物。但同时需要注意碱/碱土金属与Cr的部分结合产物中，Cr以六价态存在，具有较高的毒性。碱/碱土金属对于团聚现象发生，分别起到了促进和抑制作用，适当含量的碱金属有利于减少重金属的释放。通过总结碱/碱土金属对重金属迁移转化的影响规律，以期为降低重金属的危害提供思路。