Structural characterization and magnetization of Mg0.7Zn0.3SmxFe2−xO4 ferrites

Mg_0.7Zn_0.3Sm_xFe_2−xO₄ ferrites were prepared by the solid-state reaction method and were characterized by X-ray diffraction and magnetization measurements. A single spinel phase was obtained in the range 0.00?x?0.03$0.00?x?0.03$. The lattice parameter was found to increase at x=0.01$x=0.01$ and then decreases up to x=0.03$x=0.03$, which may indicate a distortion in the spinel lattice. The saturation magnetization was found to decrease with the increase in x up to 0.04, due to the replacement of the Fe³⁺ ions by the Sm³⁺ ions.     

Magnetic entropy-change in La0.67−xBixCa0.33MnO3 compound

Bi doped lanthanum manganites with the chemical composition of La_0.67−xBi_xCa_0.33MnO₃ (x=0$x=0$, 0.05, 0.1, 0.2) were prepared by the standard solid-state process. The Curie temperatures were measured to be 267 K for x=0$x=0$, 248 K for x=0.05$x=0.05$, 244 K for x=0.1$x=0.1$ and 229 K for x=0.2$x=0.2$ samples. It was found that the maximum value of the magnetic entropy change ∣ΔS_m∣ has reached the highest value of 6.08 J/kg K at 3 T for the composition with x=0.05$x=0.05$. Nearly the same maximum entropy change was observed for the x=0$x=0$ sample. A large decrease in the magnitude of the entropy change was observed for the x=0.2$x=0.2$ sample.     

Growth and magnetism in amorphous Si1−xMnx thin films grown by thermal deposition

Si_1−xMn_x   (x?0.22$x?0.22$) thin films were grown by using a thermal evaporator, and their magnetic and electrical properties were investigated. The Si_1−xMn_x semiconductors are amorphous when Mn concentration is 9.0 at% and less. The electrical resistivities of amorphous Si_1−xMn_x   (x?0.09$x?0.09$) semiconductor thin films are in the range of 9.86–6.59×10⁻⁴ Ω cm at room temperature and decrease with increasing Mn concentration. The amorphous Si_1−xMn_x   (x?0.09$x?0.09$) semiconductor thin films are p-type and hole densities are 3.73×10¹⁸–1.33×10²² cm⁻³ at room temperature. Low temperature magnetization characteristics reveal that amorphous Si_1−xMn_x   (x?0.09$x?0.09$) semiconductor thin films are paramagnetic.     

Magnetocaloric effect of Gd5SixSn4−x Alloys

The crystal structure and magnetocaloric effect of Gd₅Si_xSn_4−x   (with x=2.4$x=2.4$, 2.6 and 2.8) alloys were studied by means of X-ray power diffraction (XRD) and magnetic measurements. From the XRD results, these alloys adopt a Gd₅Si₄-type structure for x=2.8$x=2.8$, Gd₅Si₄-type and Gd₅Si₂Ge₂-type mixed structures for x=2.4$x=2.4$ and 2.6, while some minor phases can also be found. The Curie temperatures of the Gd₅Si_xSn_4−x increases gradually when x increases from 276 K for x=2.4$x=2.4$, to 301.5 K for x=2.8$x=2.8$. Magnetic entropy changes of these alloys at a magnetic field change of 0–1.8 T are 1.88, 2.26 and 1.69 J/kg K for x=2.4$x=2.4$, 2.6 and 2.8, respectively. The temperature-dependent XRD analysis shows that there is no crystallographic transition for these alloys, which can explain their low magnetic entropy changes.     

Magnetic,dielectric and magnetoelectric properties of new family of orthorhombic multiferroic Eu1−xYxMNO3 manganites

Multiferroic ground states with a spatially modulated antiferromagnetic structure and electric polarization have been revealed in Eu_1−xY_xMnO₃ (0.2?x?0.5$0.2?x?0.5$) single crystals. While the slightly substituted (x?0.1$x?0.1$) compounds exhibited a transition from the incommensurate (IC) to the canted antiferromagnetic (CAF) state at _TCA<_TN$T_{\mathrm{CA}}<T_{\mathrm{N}}$, the transitions from IC to commensurate ferroelectric (C/FE) phase were observed at _Tlock<_TN$T_{\mathrm{lock}}<T_{\mathrm{N}}$ for x>0.2$x>0.2$. Various phase transitions were observed in the magnetic fields up to 250 kOe along a, b, c axes by magnetization, magnetostriction and electric polarization measurements which show an existence of a spontaneous electric polarization below T_lock.     

Magnetic properties and magnetocaloric effect in Dy(Co1−xFex)2 alloys

Polycrystalline samples of Laves-phase alloys Dy(Co_1−xFe_x)₂(x=0$x=0$, 0.02,0.04,0.06,0.08) have been prepared by arc-melting method. No first order phase transition was observed for samples with x≠0$x\ne 0$. With the increase of Fe content, the Curie temperature increases greatly, while the calculated magnetic entropy change, ΔS_M, shows an obvious decrease with a broader peak. The origin of the magnetocaloric effect in Dy(Co_1−xFe_x)₂ alloys has been discussed.     

Magnetic and transport properties in double-doping La(2+4x)/3Sr(1−4x)/3Mn1–xCuxO3 (0⩽x⩽0.20) systems

A series of the double-doping samples La_(2+4x)/3Sr_(1−4x)/3Mn_1–xCu_xO₃(0?x?0.2)$(0?x?0.2)$with the Mn³⁺/Mn⁴⁺ ratio fixed at 2:1 and the single-doping samples La_2/3Sr_1/3Mn_1–xCu_xO₃(0?x?0.2)$(0?x?0.2)$ have been investigated. For the double-doping samples, though the ratio Mn³⁺/Mn⁴⁺=2:1 has been generally recognized the optimum ratio, the Curie temperature _TC$T_{\mathrm{C}}$ and metallic–insulator transition temperature _Tp1$T_{\mathrm{p}1}$ are more rapidly decreased by Cu substitution than that corresponding to single-doping samples. And the resistivity ρ$\rho$ value for the double doping is larger about two or three orders of magnitude than that corresponding to single doping. At the same time, two resistivity peaks and two magnetoresistance (MR) peaks appear. We suggest that for the double-doping samples the A-site cation size 〈r_A〉 and the A-site mismatch factor σ²${\sigma }^2$ decreases with increasing doping level, which leads to the system microstructural distortion. This microstructural distortion makes the Mn³⁺–O–Mn⁴⁺ cut off more cluster-spin except for the clusters induced by Cu. These cluster interfaces contribute to ρ$\rho$, which exceeds far the contribution of e_g electron decreasing with doping increasing in the single doping. At the same time, such interface scattering also gives rise to the appearance of second peak for the double-doping samples. The experimental results shows that double doping could be also a potential way in tuning colossal MR (CMR), which can give a guide for the adequate selection of CMR materials.     

Structural,magnetic, and transport properties in La(2+4x)/3Sr(1−4x)/3Mn1−xCuxO3 (0⩽x⩽0.20) system

A series of the double-doping samples La_(2+4x)/3Sr_(1−4x)/3Mn_1−xCu_xO₃(0?x?0.2)$(0?x?0.2)$ with the Mn³⁺/Mn⁴⁺ ratio fixed at 2:1 have been prepared. The structural, magnetic, transport properties and magnetoresistance of the series samples have been investigated. It is found that no apparent crystal structure change is introduced by Cu doping up to x=0.20$x=0.20$. But the Curie temperature _TC$T_{\mathrm{C}}$ and magnetization M   are strongly affected by Cu substitution. A remarkable magnetotransport behavior, characterized by double bumps, is observed, and an obvious low-temperature upturn is found in the range of 0.07?x?0.12$0.07?x?0.12$. As a result, the temperature range of colossal magnetoresistance (CMR) is greatly broadened. Moreover, it is found that the room temperature magnetoresistance (MR) of double-doping samples is obviously larger that the undoped La_2/3Sr_1/3Mn_1−xCu_xO₃ at 300 K, which can give a guide for the adequate selection of the room temperature CMR materials.     

Magnetic and optical properties of spinel FexCo3−xO4 thin films

Magnetic and optical properties of Fe_xCo_3−xO₄ thin films grown by sol–gel method have been investigated as the Fe composition (x  ) increases from 0 to 2. X-ray diffraction measurements revealed that the normal- and inverse-spinel phases coexist for 0.76?x?0.93$0.76?x?0.93$. The normal-spinel phase is dominant below x=0.76$x=0.76$ while the inverse-spinel phase above x=0.93$x=0.93$. The lattice constant of the inverse-spinel phase is found to be larger than that of the normal-spinel phase. For both phases the lattice constant increases with increasing x. The Fe_xCo_3−xO₄ films containing the inverse-spinel phase exhibit net magnetization that increases with increasing x  . Conversion electron Mössbauer spectrum measured on the x=0.93$x=0.93$ sample showed that Fe²⁺ ions prefer the octahedral sites, indicating the formation of the inverse-spinel phase. Analysis on the measured optical absorption spectra for the samples by spectroscopic ellipsometry indicates a dominance of the normal-spinel phase for low x in which Fe³⁺ ions mostly occupy the octahedral sites. Observation of a crystal-field transition at 1.6 eV originating from tetrahedral Fe³⁺ ion confirms the existence of the inverse-spinel phase for high x.     

Structure and magnetic phase diagram of mixed rare-earth Nd1−xTbxFe10.5Mo1.5 compounds

The structural and magnetic properties of Nd_1−xTb_xFe_10.5Mo_1.5 (x=0$x=0$, 0.2, 0.4, 0.6, 0.8, 1.0) compounds have been investigated by means of X-ray diffraction and magnetic measurements. All the investigated compounds crystallize in the tetragonal ThMn₁₂-type structure with I4/mmm space group. The lattice parameters a, c and the unit-cell volume V decrease with increasing x. The Curie temperatures T_C are almost independent x. There exists a unique spin-reorientation transition for the end compositions of Nd_1−xTb_xFe_10.5Mo_1.5 compounds with x=0$x=0$ and x=1$x=1$, while two spin-reorientation transitions are observed for x=0.2–0.8$x=0.2–0.8$. The room-temperature magnetocrystalline anisotropy of Nd_1−xTb_xFe_10.5Mo_1.5 compounds changes from uniaxial to planar with increasing x content. Based on magnetic measurements, a magnetic phase diagram of Nd_1−xTb_xFe_10.5Mo_1.5 compounds is constructed. By minimizing the magnetocrystalline anisotropy energy, a theoretical magnetic phase diagram for the Nd_1−xTb_xFe_10.5Mo_1.5 system is derived, showing a reasonable agreement with the observations.     

Fabrication and characterization of electrodeposited Co1−xCrx nanowires

Co_1−xCr_x   alloy nanowires with 0.01<x<0.93$0.01<x<0.93$ were fabricated by electrodeposition in a porous alumina membrane from an electrolyte containing Co and Cr ions. The composition, structure and magnetic properties of the nanowires have been characterized. Cobalt-rich nanowires were electrodeposited at a potential of −1.0 V relative to Ag/AgCl and chromium-rich nanowires were deposited beyond −3.5 V. The optimized processing conditions include hydrogen annealing to give hysteresis loops for the Co₈₀Cr₂₀ nanowires with coercivity of up to 200 mT and squareness of up to 0.95. Magnetization of the Co₈₀Cr₂₀ nanowire is 77 A m² kg⁻¹ and the energy product of the arrays is 35 kJ m⁻³.     

Permeability-frequency spectra of (Fe1−xcox)73.5Cu1Nb3Si13.5B9 nanocrystalline alloys under different magnetic fields

Under various amplitude of AC magnetic fields domain wall motion is the main mechanism in the magnetization process. This includes domain wall bulging and domain wall displacing. In this paper complex permeability-frequency spectra of (Fe_1−xCo_x)_73.5Cu₁Nb₃Si_13.5B₉ (x=0,0.5$x=0,0.5$) nanocrystalline alloys were measured as a function of the AC magnetic field, ranging from 0.001 to 0.04 Oe. Obvious changes have been found in complex permeability spectra for alloy x=0$x=0$ with the change of the amplitude of AC magnetic field, but variation of AC magnetic field has little effect on complex permeability spectra for alloy x=0.5$x=0.5$. This is attributed to the increased pinning field after substitution of Fe with Co in Fe_73.5Cu₁Nb₃Si_13.5B₉ nanaocrystalline alloy.     

Effect of carbon content on structure and magnetic properties for (Fe,Ni)1−xCx by mechanical alloying

FCC (Fe₅₅Ni₄₅)_1−xC_x   supersaturated solid solution was prepared in a wide concentration range (0?x?0.9)$(0?x?0.9)$ by mechanical alloying of nanocrystalline Fe₅₅Ni₄₅ with graphite. The lattice constant of Fe₅₅Ni₄₅ increases linearly with increasing carbon content up to x=0.25$x=0.25$. At the same time, it is found that the magnetic moment per metal atom (Fe, Ni) decreases linearly with increasing carbon content for 0?x?0.25$0?x?0.25$ with a slope of 1.2 μ_B/at. For high carbon content, x?0.5$x?0.5$, it is observed that the decrease of lattice constant and increase of moment per metal atom (Fe, Ni) with increasing C content, indicates that the dissolution of carbon is hindered by the high-volume fraction of graphite in the initial powder mixture. The complete amorphization of x=0.5$x=0.5$ does not occur after the extended ball milling. The alloying effect of carbon on the magnetization is compared with other metalloid B, P, and Si in Fe- and Ni-based binary system.     

Angular dependence of tunneling magnetoresistance in La0.7Sr0.3MnO3 step-edge junctions

La_0.7Sr_0.3MnO₃ (LSMO) tunneling magnetoresistance (TMR) junctions have been fabricated on step-edge (0 0 1) SrTiO₃ substrates with a high step-edge angle. In the measurement of magnetoresistance (MR) ratio versus external magnetic field H, butterfly-like MR curves are clearly observed. The MR(H  ) curves vary with θ$\theta$, the angle between the applied magnetic field and the current direction in the substrate plane, showing anisotropic MR properties. A much broader MR(H) response is observed for the configuration of H perpendicular to the substrate plane. Additionally, the maxima-MR field H_p almost coincides with the coercive field H_c for θ<60°$\theta <60°$ but obeys a different form from _Hc(θ)$H_{\mathrm{c}}(\theta )$. The high-field junction resistance shows an intrinsic sin²θ${\sin }^2\theta$ angular dependence, while the low-field resistance shows an extrinsic cos(4θ)$\cos (4\theta )$ angular dependence. The distinctive features are mainly due to the induced magnetization anisotropy in the artificial steps of grain boundaries.     

Effect of Co ions on the microstructure and magnetic properties of nanocrystalline CoxFe3−xO4 films

Co_xFe_3−xO₄ nanocrystalline films (x=0.2-0.8$x=0.2-0.8$) on SiO₂ substrates were prepared by a sol–gel method. The microstructural and magnetic properties of samples were measured by an X-ray diffractometer (XRD) and a vibrating sample magnetometer (VSM), respectively. Atomic force microscopy (AFM) was used to investigate the surface image of the sample. The measurement results of XRD at room temperature show that the pure spinel structure of the film could be obtained at x=0.8$x=0.8$. The magnetic measurements reveal the magnetic properties of the samples depend strongly on Co²⁺ ions content, and the optimal parameters of the saturation magnetization and coercivity in Co_xFe_3−xO₄films are obtained at x=0.8$x=0.8$. Here the coercivity reaches 1.954 kOe. The average grain sizes of the film are less than 30 nm obtained from the microscopy images. The situ measurement at high temperatures of range from 293 to 773 K shows that the microstructures of Co_0.8Fe_2.2O₄ film have good thermal stabilization.     

Effects of Ag addition on electrical transport and magnetic properties of La0.67Ba0.33Mn0.88Cr0.12O3

We have prepared a series of polycrystalline manganites with the nominal compositions, La_0.67Ba_0.33Mn_0.88Cr_0.12O₃/Ag_x (LBMCO/Ag_x) (x   is the mole fraction) with x=0$x=0$, 0.05, 0.1, 0.15, 0.2, 0.23, 0.27, 0.3, 0.35. The X-ray diffraction patterns show that the samples with x>0.05$x>0.05$ are two-phase composites. The Ag addition in LBMCO improves the properties of grain surfaces/boundaries and reduces the resistivity of the composites. For x=0.30$x=0.30$ sample, a minimum resistivity is obtained and a maximum room temperature magnetoresistance up to −54.5% was observed at 288 K, 1 T field. The room temperature T_C and the reduced resistivity are responsible for the enhancement of room temperature MR.