New strategies for synthesis of partially fluorinated heterocycles as precursors for trifluoromethyl-substituted polymers

The building-block strategy is applied to the synthesis of new compounds with two five-membered heteroaromatic units. The heteroaromatic rings contain a fluorine atom which is activated towards nucleophilic displacement reactions by an adjacent trifluoromethyl group. The difunctional compounds can be converted into poly(arylene ether)s by base-catalyzed polycondensation with bisphenols or bisthiophenols. Trifluoromethylated poly(arylether oxazole)s and poly(arylthioether oxazole)s are obtained by this route. All representatives of these two new classes of polymers are soluble in common organic solvents. Reaction conditions for the polycondensation as well as thermal stability, glass transition temperatures, and molar masses of the polymers are described.     

Self-regulating polycondensations. IV. Ordered oxadiazole-imide copolymers

Ordered oxadiazole-imide copolymers are prepared from simple aminobenzhydrazide monomers by a step-wise reaction which begins with the condensation of a diacid chloride to produce in situ a diamine containing hydrazide linkages. The in situ diamine is then reacted with a dianhydride to yield an ordered hydrazide-amic-acid copolymer; this precursor is converted by heating to the ordered heterocycle copolymer. Polymers prepared via this manner are identical in properties to those obtained by the reaction of a dianhydride with a diamine containing hydrazide linkages preformed by a straight forward synthesis from a dinitro precursor. Fibers spun from the soluble precursor polymers were converted via cyclodehydration to thermally stable fibers. Another polyoxadiazole-imide was produced in similar fashion; e.g., an aminobenzhydrazide was reacted with the acid chloride of trimellitic anhydride to yield an in situ AB monomer which was polymerized to yield a precursor polyhydrazide-amic-acid, which in turn was converted by cyclodehydration to an AB type polyoxadiazole-imide. Additional examples are cited of the formation of polymers from the in situ intermediates produced by the “self-regulating” reaction of aminobenzhydrazides with acid chlorides followed by polycondensation with difunctional monomers.     

Comments on the Status and Future of Interfacial Polycondensation

Abstract

Interfacial polycondensation came into prominence in the 1950′s with the work of Schnell on polycarbonates, Conix on polyesters, and Wittbecker, Morgan and co-workers on polyurethanes, polyamides and other polymer classes. There were a few earlier patent references. The method has several variations and is a highly effective procedure for the rapid preparation of many polymers on a small scale. It is particularly appropriate for polymers which are thermally unstable or unmeltable, for use with volatile or unstable intermediates and for polymers with reactive functional groups. Literally thousands of polymers have been made by this process. There are a number of short-comings to the process, most of which can be overcome by adjustment of the polymerization conditions. Polycarbonates and aromatic polyamides are reported to be prepared commercially by stirred interfacial processes. Another application is the encapsulation of pesticides, inks, and other materials. As to the future, the processes are a basic part of the chemist's tool kit and will continue to be used in the laboratory for rapid syntheses and for those polymers which are not obtained as readily by other means. The basic tests of commercial use of these processes, as with any other process, will be attainment of results not available by other routes, economic considerations, and safety and environmental factors.     

Self-regulating polycondensations: Ordered aromatic polyamide-esters

The polycondensation of aminophenols with diacid chlorides was examined to determine if the amide-ester polymers obtained are random or ordered. All of the evidence obtained points to the conclusion that ordered copolymers indeed are prepared and that a “self-regulating” polymerization process is operating by virtue of the considerably greater reactivity of aromatic amino groups relative to phenol groups. The first step of the reaction involves the in situ preparation of a diphenol-amide which undergoes further condensation. The diphenol-amide intermediate may be isolated or reacted in situ. In addition to the ordered polymer from a given aminophenol and a single diacid chloride, ordered copolymers from two different diacid chlorides were prepared in which the diacid moieties appear in an alternating fashion; the structure of such polymers depends on the order of addition of the diacid chlorides. Corresponding polymers also may be prepared from the preformed diphenol-amide monomers. The molecular weights of certain of the polymers were sufficient for the preparation of films which could be hot-stretched severalfold. Interfacial polycondensations gave polymers of higher inherent viscosities than did solution polymerizations when aminophenols or diphenol-amide monomers were condensed with diacid chlorides.     

Polybenzimidazoles,new thermally stable polymeres

Wholly aromatic polybenzimidazoles were synthesized from aromatic tetraamines and difunctional aromatic acids and characterized as new thermally stable polymers. The melt polycondensation of aromatic tetraamines and the diphenyl esters of aromatic dicarboxylic acids was developed as a general procedure of wide applicability. Polybenzimidazoles containing mixed aromatic units in the chain backbone were prepared from 3,3′-diaminobenzidine, 1,2,4,5-tetraaminobenzene and a variety of aromatic diphenyl dicarboxylates. Phenyl 3,4-diaminobenzoate could also be polymerized by melt condensation to give poly-2,5(6)-benzimidazole. The polymers were characterized by a high degree of stability, showing great resistance to treatment with hydrolytic media and an ability to withstand continued exposure to elevated temperatures. Most of the polymers were infusible, but some had melting points above about 400°C. Many of the polymers exhibited no change in properties on being heated to 550°C, and showed a weight loss of less than 5% when heated under nitrogen for several hours to 600°C. The polymers were soluble in concentrated sulfuric acid and formic acid, producing stable solutions. Many of the polymers were soluble in dimethyl sulfoxide and some also in dimethylformamide. The inherent viscosities of a number of polymers in 0.5% dimethyl sulfoxide solution ranged from approximately 0.4 to 1.1. The higher polymers could be cast into stiff and tough films from formic acid and dimethyl sulfoxide solutions.     

Synthesis and investigation of polymers based on the nitriles of polycarboxylic acids and diamines

The influence of the reaction medium on the polycondensation of the tetranitriles of tetracarboxylic acids and diamines has been investigated. The reaction in phenol and cresols yields polymers with macroheterocycles in the chain—polyhexasocyclanes. If phenols with electron-accepting substituents are used as reaction medium, nonmacrocyclic polymers with side aroxyl groups in the chain, polyisoindoxazenes—are formed. The properties of these polymers were studied. Macroheterocyclic compounds formed by condensation of phthalodinitrile with diamines can be used as one of the initial substances in polyhexasocyclane synthesis. Polyamidohexasocyclanes were prepared by polycondensation of macroheterocycles with dicarboxylic acid dichlorides. Some regularities of their formation and their properties were investigated.     

ABA triblock copolymers from two mechanistic techniques: Polycondensation and atom transfer radical polymerization

ABA triblock copolymers were synthesized using two polymerization techniques, polycondensation, and atom transfer radical polymerization (ATRP). A telechelic polymer was synthesized via polycondensation, which was then functionalized into a difunctional ATRP initiator. Under ATRP conditions, outer blocks were polymerized to form the ABA triblock copolymer. Six types of samples were prepared based on a poly(ether ether ketone) or poly(arylene ether sulfone) center block with either poly(methyl methacrylate), poly(pentafluorostyrene), or poly(ionic liquid) outer blocks. As polycondensation results in polymers with broad molecular weight distribution (MWD), the center of these triblock copolymers are disperse, while the outside blocks have narrow MWD due to the control afforded from ATRP. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 228–238     

含二氮杂荼酮结构新型聚芳醚系列高性能聚合物的合成与性能

从分子结构设计出发 ,以价廉易得的苯酚、苯酐为原料 ,经温和的工艺合成了结构全新的 4 ( 4′ 羟基苯基 ) 2 ,3 二氮杂萘 1 酮 (DHPZ) ,对其合成反应路线、合成反应动力学、反应机理进行了深入研究 .在大量实验研究基础上 ,结合分子立体结构的计算机模拟 ,确认其具有非共平面扭曲结构特征 ,其N—H键和O—H键具有类似的反应活性 ,是一种类似双酚的新单体 .以DHPZ与多种市售双卤单体如二氟二苯酮 (DFK)、二氯二苯砜 (DCS)、二氯二苯双酮 (DCKK)、二氯二苯腈 (DCBN)等经溶液亲核取代逐步聚合反应制得一系列含二氮杂萘酮结构的新型高性能聚醚砜 (PPES)、聚醚酮 (PPEK)、聚醚砜酮 (PPESK)、聚醚酮酮 (PPEKK)、聚醚砜酮酮(PPESKK)、聚醚腈酮 (PPENK)、聚醚腈砜 (PPENS)、聚醚腈砜酮 (PPENSK)等 ,对其结构进行了谱学表征 ,对其性能进行了全面测试 ,研究了其结构与性能关系 .谱学数据证明皆为无定型高聚物 .其玻璃化温度Tg 在 2 5 0～370℃之间 ,可以通过取代基团结构或主链上砜 酮基团比例进行调控 .在大量实验研究基础上 ,创造性提出“引入全芳环非共平面扭曲分子链结构赋予高聚物既耐高温又可溶解的优异综合性能”的分子结构设计理论 .在此分子设计理论指导下 ,设计并合成了含联苯二氮杂萘酮结构的新型二     

Syntheses of new polymers by destructive methods—I. Mechanochemical polycondensation and polycondensation by 8Co γ-rays irradiation of poly(ethyleneterephthalate) with ethylenediamine

Destruction of heterochain polymers, such as poly(ethyleneterephthalate), achieved under the action of mechanical energy or of γ-rays, is accompanied by the accumulation of an increasing number of functional end-groups, which are able to react with suitable difunctional reagents. Thus, processes are greatly influenced by conditions, e.g. processing time, ratio of reactants, temperature and atmosphere (inert, oxgen, etc.), in which the reaction occurs.The polycondensation products so obtained exhibit properties different from those of the original polymer, viz. increased thermal stability, permanent magnetic moment and chemical resistance.     

用大分子引发剂法制备嵌段共聚物

主要介绍了用大分子引发剂法制备嵌段共聚物的方法。大分子引发剂是从已商品化的功能聚合物制得或用其它活性聚合方法合成。从单封端的端羟基聚合物、其它单官能团或双官能团聚合物以及双功能基团缩聚物制得大分子引发剂．然后用于原子转移自由基聚合(ATRP)、氮氧稳定自由基聚合以及可逆加成裂解链转移(RAFT)聚合等．可制得结构可控、分子量分布窄的嵌段共聚物。     

Linear polyesters containing isocyanurate rings

Two series of linear polyesters containing isocyanurate rings have been prepared to determine the effect of structural variations on thermal and solubility properties. The polyesters were prepared by the polycondensation reaction of isocyanurate containing difunctional acid and ester monomers with linear diols. The substituent on the isocyanurate ring and the length of the acid side chain have been shown to have considerable effect on the glass transition temperature T_g. Different solubility properties were observed for the series of polyesters in which the pendant substituent was ? C₆H₅ and the acid side-chain was ? CH₂CO₂H. These polymers were insoluble in THF, and the polyester prepared from 1,6-hexanediol was also insoluble in chloroform. Thermal gravimetric analysis (TGA) indicated that structural differences had no significant effect on the thermal stability of these linear polyesters.     

COMPARED PROPERTIES OF FLUORINATED HETEROCYCLIC COPOLYIMIDES

Various new fluorinated heterocyclic copolyimides have been synthesized by a polycondensation reaction of a diacid chloride containing imide, hexafluoroisopropylidene and methylene groups with aromatic or heteroaromatic diamines containing preformed phenylquinoxaline or 1,3,4-oxadiazole rings. Other fluorinated heterocyclic copolyimides have been prepared by a polycondensation reaction of the same diacid chloride with aromatic dihydrazides, bis(o-hydroxy-amine)s or a bis(o-carboxy-amine), resulting in intermediate polyhydrazides, poly(o-hydroxy-amide)s or poly(o-carboxy-amide), respectively, which were futher cyclodehydrated to the corresponding polyoxadia zole-imide, polybenzoxazole-imide or polybenzoxazinone-imide structure. These polymers showed good solubility in polar amidic solvents, such as N-methylpyrrolidinone (NMP) and dimethylformamide (DMF), and even in less polar liquids, like tetrahydrofurane or pyridine, except for those compounds containing benzoxazole rings which were less soluble, only on heating in NMP or DMF. The weight average molecular weight measured for tetrahydrofurane-fully-soluble polymers are in the range of 12800–26700 and the polydispersity is in the range of 2–5. All these polymers exhibited good thermal stability, with decomposition temperature being above 350°C, although somewhat lower than that of related polymers prepared by using fully aromatic diacid chlorides instead of the present ones containing methylene units. The glass transition temperature is in the range of 200–300°C. The dielectric constant measured for polymer films is in the range of 3.3–3.7. Tensile strength is in the range of 35–70 MPa, elongation to break between 30–40% and tensile modulus in the range of 170–330 MPa. A study of the relation between conformational parameters and properties of some of these polymers has been carried out by using the Monte Carlo method with an allowance for hindered rotation, and the values were compared with the experimental data and discussed in relation with the rigidity of the chains. The present polymers are potential candidates for use as high performance materials.     

Synthesis and Characterization of Bis(Isopropenylphenoxy)Alkanes and Bis(Vinylphenoxy)Alkanes: Two Classes of Highly Reactive,Photopolymerizable Monomers

Abstract

A novel and facile synthesis of difunctional, aromatic vinyl ether analogs is reported. These materials, which are conveniently prepared by the condensation of 4-acetoxystyrene or 4-isopropenylphenyl acetate with α, ω-dihaloalkanes in the presence of base, can be cationically polymerized using diaryliodonium or triarylsulfonium salts as photoinitiators to produce crosslinked polymers. Relative reactivities of the monomers toward cationic polymerization were studied using differential scanning photocalorimetry. The thermal stabilities of the polymers resulting from the photopolymerization of the difunctional, aromatic vinyl ether analogs were studied using thermogravimetric analysis.     

Three-component coupling polymerization of bisallene,aryl dihalides,and nucleophiles via π-allylpalladium complex. II. Effect of nucleophiles on polymerization

A novel palladium-catalyzed three-component polycondensation of 1,2,10,11-dodecatetraene, 4,4′-diiodobiphenyl, and nucleophiles was carried out using various carbanions and amines as a nucleophilic part. The polymerization with various sodium diethyl malonates produced polymers in high yields. Particularly, no exo-double bond was detected in the polymers prepared from sodium diethyl malonates bearing substituents directly on the carbanion center. The ratios of E- and Z- isomeric units in the polymers were dependent on the structure of the nucleophiles used. Other carbanions with appropriate electron-withdrawing groups such as sulphones and ketones can be also used as a nucleophile for the present polycondensation. Within heteronucleophiles examined, cyclic amines were suitable to produce polymers in high yields. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1211–1218, 1997     

Synthesis and characterization of hyperbranched polymers with increased chemical versatility for imprint lithographic resists

Hyperbranched polymers were prepared from a variety of mono‐ and difunctional monomers and used in the development of novel UV‐imprint lithography (UV‐IL) resists. The unique physical and chemical properties of these hyperbranched materials significantly increase the range of molecular systems that could be imprinted. Traditional challenges, such as the use of monomers that have low boiling points or the use of insoluble/highly crystalline momomers, are overcome by the preparation of hyperbranched polymers that incorporate these repeat units. In addition, the low viscosity of the hyperbranched macromolecules and the large number of reactive chain ends overcome many difficulties that are traditionally associated with the use of polymeric materials as imprint resists. Hyperbranched polymers containing up to 12 mol % pendant vinyl groups, needed for secondary crosslinking during imprinting, were prepared with a wide range of repeat unit structures and successfully imprinted with features from tens of microns to ∼ 100 nm. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6238–6254, 2008     

Synthesis of reactive aromatic polyesters having pendant chlorohydrin moieties

A monomer containing a chlorohydrin moiety, propyl chlorohydrin diphenolate (PCHDP), was synthesized. Reactive polyesters having these pendant chlorohydrin moieties were prepared by the interfacial polycondensation of isophthaloyl chloride with PCHDP or with PCHDP and diphenolic acid using phase transfer catalyst. The molar ratio of reactants and the phase ratio of water to organic solvent strongly affect the molecular weight of resulting polymers and polymers with high molecular weight are obtained at the molar ratio of 1.0–1.15 and the phase ratio of 2.0–3.5. Swelling of the growing polymers is dependent on the molar ratio of the reactants and the phase ratio because of the hydrophilic and hydrophobic nature of the pendant chlorhydrin moiety. The resulting polymers are not soluble in any solvent except water in which hydrolysis occurs. Thus so, the structure of polymers was confirmed by ¹³C CP/MAS NMR. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of hyperbranched polyesters from glycerol‐based AB2 monomer

This article describes the synthesis of a new glycerol‐based AB₂ type monomer—ethyl{3‐[2‐hydroxy‐1‐(hydroxymethyl)ethoxy]propyl}thioacetate ( 4 ) and its application for the preparation of hyperbranched polyesters. The polycondensation of 4 has been performed over a wide range of catalysts and reaction conditions leading to polymers containing solely primary hydroxyl groups. The polycondensation progress has been monitored by means of ¹H NMR. The degree of branching of the polymers showed to be in the range of 0.5 ± 0.03. The obtained polyesters easily undergo hydrolysis or alcoholysis and may be of interest as recycled materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3860–3868, 2009     

Octafluoroisobutylene epoxide derivatives

Octafluoroisobutylene epoxide (OFIBO) reacts with alkoxides in a manner similar to hexafluoropropylene epoxide (HFPO). Higher oligomers of OFIBO than previously reported have been prepared, but no difunctional polymers with molecular weights as high as obtained with HFPO could be made.Unsaturated ethers derived from OFIBO dimer and from a potassium pentafluorophenoxide-OFIBO adduct have been incorporated into perfluorinated polymers. The unsaturated ether, perfluoro(2-phenoxypropene), affords a crosslinking site for the nucleophilic vulcanization of a tetrafluoro-ethylene-perfluoro (methyl vinyl ether) perfluoroelastomer.     

Thermal properties and solubility of ordered aromatic polyamides containing a methyl-substituted phenylene linkage

Ordered aromatic polyamides and copolyamides were prepared by the polycondensation of terephthaloyl and isophthaloyl dichlorides with symmetrical diamines containing preformed amide linkages derived from unsymmetrical methyl—substituted aromatic diamines at low temperature. Thermal properties and solubilities of the ordered polyamides were compared with those of the corresponding random polyamides. There was little difference between thermal stabilities of the ordered polyamide and the corresponding random one, while the former was less soluble in organic solvents than the latter, depending on the extent of hydrogen bonding of the amide groups. The thermal stability of the alternating copolyamides containing both terephthaloyl and isophthaloyl groups as acid components was less than that of the corresponding homopolymers having either a terephthaloyl or an isophthaloyl group, and the solubility of the former resembled that of the corresponding ordered homopolysiophthalamides in accord with the extent of hydrogen bonding of the amide groups in both polymers.     

Green synthesis of polymers containing phosphorus in the main chain

New structures of polymers containing phosphorus in the main chain were prepared by interfacial polycondensation of phenylphosphonic dichloride with 4,4’-(1,3-phenylenediisopropylidene) bisphenol (bisphenol M) using two different methods: method I: gas–liquid interfacial polycondensation without an organic solvent and a catalyst; and method II: solid–liquid interfacial polycondensation using green solvents and without catalyst. The aim of this work was to apply these methodologies as eco-friendly and economical procedures for a green chemistry. The polymers were characterized by gel permeation chromatography (GPC), FT-IR, ¹H and ³¹P-NMR spectroscopy, differential scanning calorimetry (DSC) and thermal analysis. Yields in the range of 88.0–90.0, and inherent viscosities in the range of 2.2–3.2 dl/g were obtained. High molecular weight polymers (57 600–114 400) have been successfully prepared. The polymers are self-extinguishing and begin to lose weight at around 300 °C. The flammability was investigated by measuring limiting oxygen index values (LOI).