Bromination of 4-(2-thienyl)thiazoles and 2-(2-thienyl)quinoline

Depending on the substituent, the bromination of 4-(2-thienyl)thiazoles and 2-(2-thienyl)quinoline takes place in the 5 position of the thiophene or thiazole ring. When an amino group is present in the 2 position of the thiazole ring, bromination takes place in the 5 position of the thiazole ring. When excess brominating agent is present, a second bromine atom enters the 5 position of the free ring.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 35–38, January, 1982.     

Cyclization reactions of 2-(2-chloro-4-nitrophenylsulfonyl)-1-(2-thienyl)ethanone

A new sulfonyl group-containing heterocyclic compound 2-(2-chloro-4-nitrophenylsulfonyl)-1-(2-thienyl)ethanone 2 was prepared from the corresponding sulfide 2-(2-chloro-4-nitrophenylthio)-1-(2-thienyl)ethanone 1 . Two different cyclization reactions of the compound 2 were discussed. In contrast to the tandem alkylation-cyclization process [1], another cyclic procedure was described. In the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene as a base and dimethylformamide as a solvent, compound 2 was treated with ethyl acrylate or methyl methacrylate at 50–55° to give the 1,4-benzoxathiin 4,4-dioxide 5 or 6 respectively via a tandem Michael conjugate addition-cyclization process.     

Crystal Structure and Photochromic Properties of [1-(2-Methyl-5-(4-cyanophenyl)-3-thienyl)]-2-(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene

A new photochromic diarylethene, [1-(2-methyl-5-(4-cyanophenyl)-3-thienyl-2-(2-methyl-5-phenyl-3-thienyl)]perfluorocyclopentene(1o, C28H17F6NS2), was synthesized and its structure was determined by single-crystal X-ray diffraction analysis. Its crystal belongs to the monoclinic system, space group P21/c with a = 24.1381(5), b = 9.3834(6), c = 11.1073(8), β = 94.477(4)°, Z = 4, V = 2508.1(3) A3, D3 c = 1.445 mg/m, μ = 0.275, F(000) = 1112, the final R = 0.0482 and wR = 0.1429 for 5834 observed reflections(I 2σ(I)). Further study demonstrated the diarylethene underwent reversible photochromism, changing between colorless and blue in hexane solution, crystalline phase and PMMA films, respectively.     

Synthesis of 3-(2-thienyl)alanine

Summary 3-(2-Thienyl)alanine was prepared by condensing 2-thiophenecarboxaldehyde with 2,5-piperazinedione, reducing the condensation product, and finally hydrolyzing the reduction product.     

Convenient synthesis of 2-imino-3-(2-thienyl)-2(5H)-furans and their certain transformations

A convenient and effi cient method was described of the preparation of 2-imino-3-(2-thienyl)-2,5-dihydrofurans by the condensation of α-ketol with the thiophene-2-acetonitrile and some their chemical transformations were performed.     

Extractive spectrophotometric determination of niobium(V) with 3-hydroxy-2-(2-thienyl)-4H-chromen-4-one

A coloured complex of niobium (V) with 3-hydroxy-2-(2-thienyl)-4H-chromen-4-one (HTC) is produced in perchloric acid medium (4 mol/L); it is quite stable and extractable into dichloromethane. Beer's law is obeyed in the range 0.0–1.9 g Nb(V) mL^–1. The molar absorptivity at _max=420 nm is 5.0357×10⁴ L mol^–1 cm^–1. Using Job's method and the mole ratio method, the ratio of metal to ligand (Nb:HTC) in the extracted species has been found to be 1:2. The effect of anions and foreign metals is described.     

4-(Azulen-1-yl) six-membered heteroaromatics substituted in 2- and 6- positions with 2-(2-furyl)vinyl, 2-(2-thienyl)vinyl or 2-(3-thienyl)vinyl moieties

The synthesis of pyrylium and pyridinium salts and pyridines with azulene-1-yl moieties in position 4 and two 2-heteroarylvinyl groups in positions 2 and 6 was accomplished. The pyrylium salts were obtained starting from pyranones and pyridines could be prepared from these salts by treating them with ammonium acetate. The general procedures for the synthesis of pyridinium salts, which occur with good results in less delocalized electronic systems, do not take place when applied to the above obtained pyrylium salts. Therefore, as starting material 4-(azulen-1-yl)-1-(n-butyl)-2,6-dimethylpyridinium perchlorate was used, which was condensed with heteroarylcarboxaldehydes. These compounds were completely characterized and some of their spectra were discussed. Their interaction with some metal ions was revealed, observing an affinity better than in the case of simple azulenepyridines. In the last part of the paper are presented redox potentials for several pyrylium salts and pyridines in comparison with those of the nonvinylogated derivatives.     

β-(2-furyl and 2-thienyl)acroleins in reactions with vinyloxyanilines

Equimolecular amounts of-(2-furyl and 2-thienyl)acroleins and o-, m-, and p-vinyloxy-anilines react at room temperature to form-(2-furyl and 2-thienyl)acrylidinevinyloxy-anilines. Their structures were proved by hydrogenation, hydrolysis, and IR spectroscopy. Their capacity for complexing with hydrated stannic chloride was established. The bacteriostatic activity of some of the synthesized substances was tested.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1626–1630, December, 1971.     

Synthesis of ethyl 3-(3-hydroxy-2-thienyl)-3-oxopropanoates

An approach to the synthesis of substituted ethyl 3-(3-hydroxy-2-thienyl)-3-oxopropanoates was developed based on the reaction of ethyl cyanoacetate, carbon disulfide, and ethyl 4-chloroacetoacetate. The reaction regioselectively involved the ester group, rather than the nitrile one like in the case when malononitrile or cyanacetamide were used.     

Synthesis of 6-(α-thienyl)azulene from 2-butoxy-4-(α-thienyl)-Δ5-dihydropyran

2,5-Dibutoxy-4-(α-thienyl)-Δ³-dihydropyran was obtained by bromoalkoxylation at the double bond and dehydrobromination of 2-butoxy-4-(α-thienyl)-Δ⁵-dihydropyran. Acid hydrolysis of the product in the presence of N-methylaniline hydrochloride gave a salt of 3-(α-thienyl)glutaconic dialdehyde dianil, treatment of which with cyclopentadienylsodium in alcohol gives the corresponding fulvene, which is thermally cleaved to N-methylaniline and 6-(α-thienyl)azulene.     

Preparations of bis[2-(2-arylethynyl)-3-thienyl]arenes and bis[2-{2-(trimethylsilyl)ethynyl}-3-thienyl]arenes

4,4′-Bis[2-(2-phenylethynyl)-3-thienyl]biphenyl, 4,4′-bis[2-{2-(trimethylsilyl)ethynyl}-3-thienyl]biphenyl and their congeners were prepared and their properties were studied. Extension of π-system through the central benzene ring was suggested by UV-vis spectra. Connection of two 1,4-bis[2-{2-(trimethylsilyl)ethynyl}-3-thienyl]benzene units was exemplified.     

Cyclometallation of 2-(2-thienyl)pyridine and 2-(3-thienyl)pyridine with palladium(II), rhodium(III) and ruthenium(II)

Summary 2-(2-Thienyl)pyridine [H(2-tp)] and 2-(3-thienyl)pyridine [H(3-tp)] react with lithium tetrachloropalladate(II), hexachlorotetrakis(tri-n-butylphosphine) dirhodium(III), and tetrachlorohexacarbonyldiruthenium(II) to give [PdCl(C-N)]₂-(CN=2-tp and 3-tp), [RhCl₂(C-N)PBu₃]₂ (C-N = 2-tp and 3-tp), and [RuCl(2-tp)(CO)₂]₂, respectively. Some bromo analogues are also prepared. These complexes react with pyridine and tri-n-butylphosphine to give adducts in which 2-tp is chelated through pyridine-N and thiophene-3-C and 3-tp through pyridine-N and thiophene-2-C atoms. The structures of these complexes are similar to those of the corresponding complexes of cyclometallated 2-phenylpyridine.