Non-incremental interferometric displacement measurement using a laser Doppler sensor with phase coding

The inspection of fast rotating objects with rough surfaces is an important task in the emerging field of process control. However, this is challenging since fast and non-contact inspection techniques with a measurement uncertainty in the nanometer range are often required. We present a novel optical sensor allowing non-incremental interferometric displacement measurement of moving solid state objects with rough surfaces. It features three wavelength coded interference fringe systems which are superposed slightly tilted. The displacement is determined by evaluating the phase shift between the resulting scattered light signals. Experimentally, a measurement uncertainty of 660 nm was obtained. This displacement uncertainty is independent of the lateral object velocity in principle. Due to this unique feature, the sensor can be utilized advantageously for precise displacement and vibration measurements of high speed objects as demonstrated by vibration measurements at a turbo pump shaft rotating with 48 000 rpm.     

激光多普勒技术在固体测量方面的运用

介绍了激光多普勒测量技术的原理和后散射型固体表面测量方式。通过声光调制器的偏频后 ,能够确定物体的运动方向。对多普勒信号进行光学外差处理并对多普勒信号进行测相 ,可以提高测量的精度。用差动微分多普勒技术进行测量 ,可以消除由固体表面特性和激光光强的波动引起的误差。     

相位调制激光多普勒频移测量方法的改进

本文对现有相位调制激光多普勒频移测量方法进行了改进,通过定义新的鉴频参量来同时利用相位调制信号直流和交流分量中的有用信息进行多普勒频移测量.由于相位调制信号直流分量中包含着调制信号光的Fabry-Perot干涉仪光强透过率,所以这一改进本质上是将基于Fabry-Perot干涉仪的边缘技术激光多普勒频移测量方法的优势引入到相位调制测量方法中,以提高其自身的性能.理论上证明改进后的相位调制激光多普勒频移测量方法无需对信号光的光强进行测量,所以可以进一步简化探测系统的结构和较少噪声混入的通道.另外,通过对改进前后鉴频和测量灵敏度曲线进行对比,还证明了其具有更高的测量灵敏度和动态范围.实验上对硬目标反射的频移可控信号光进行测量,不但证明了理论的正确性,而且证明了改进后的相位调制激光多普勒频移测量方法,测量动态范围提高约1倍,测量标准偏差降低约35%.     

Electrohydrodynamic dispersion of metals using electron-beam heating

The generation of metallic nanoparticles using an electrohydrodynamic source is considered; in this process, the surface of a metallic anode tip is melted with an electron beam. At an anode voltage of 11–12 kV and a current of 0.2–0.3 mA, structures that mainly consist of metallic particles 20–30 nm in size form on a substrate. An increase in the current leads to the appearance of larger particles on the substrate. The conditions of nanoparticle formation are analyzed, and nanoparticles are shown to form as a result of the cascade fragmentation of the initial metallic microdrops emitted from the anode surface under the action of an electric field. The fragmentation of the initial drops is caused by the capillary instability that appears due to the recharging of these drops when they fly through an electron beam focused near the anode surface.     

Carrier-envelope phase measurement using a non phase stable laser

We demonstrate that the phase between the carrier and the pulse envelope of a few-cycle laser pulse can be retrieved from non phase stable laser systems, provided that such laser pulses are about 5 fs long and the repetition rate is in the order of 1 kHz. Our approach is based on online determination of the phase using f-2f interferometry. By a comparison of the self referencing interferometric signal with the photoelectron current emitted into a 7 degree solid angle parallel to the laser polarization, we obtain the absolute value of the carrier envelope phase. This is provided that a Coulomb correction for electron energies below 10 eV can be correctly taken into account. PACS 42.50.Hz; 42.65.Re; 32.80.Rm     

Real-time polarization phase shifting technique for dynamic deformation measurement

By using a special Ronchi phase grating and polarization phase shifting method, four phase shifted patterns can be captured simultaneously, and then the dynamic deformation can be measured. The analysis and experiments are given.     

基于超声波多普勒法的流通截面分区流速测量的研究

传统的超声波多普勒流量计测量的结果是大面积区域内具有统计意义的平均流速,不能反映流速在流通截面上的分布,当雷诺数变化很大时,测量误差很大。基于超声波多普勒效应,本文首次提出了通过对测量信息窗区域的控制,来实现在管流内部进行流速分区测量,进而测量出流速在流通截面上的分布。研制出发射传感器和接收传感器,分别能够产生细长的发射声束和接收声束,使得信息窗区域面积得以控制在很小的范围内,约 2.1× 4.8 mm2,位置也被控制在设计值处,满足分区测量要求;在自行设计的模拟管道流动装置中,成功地进行了控制信息窗区域面积和位置的实验,测量值与设计值吻合很好。实现了管道流通截面上的流速分区测量。     

Wideband optical phase modulator half-wave voltage measurement technique based on phase modulation optical link

We measured the half-wave voltage V_π of LiNbO₃ phase modulators in the broadband frequency range by analyzing the gain of phase modulation interference demodulation optical link. This is a new high practical value measurement method for half-wave voltage of LiNbO₃ phase modulators in wideband frequency range, and can accurately predict the nonlinear frequency characteristics of phase modulation optical link.     

利用moire技术测量透镜组焦距

本文提出用moire技术测量准直透镜焦距,并对结果进行了分析和讨论。     

Spatial mode compensation technique using progressive phase conjugation

Optical Review - We propose a spatial mode compensation method using progressive phase conjugation (PPC) to establish a dynamic control technology for mode distribution in multi-mode fiber (MMF)....     

Measurement of optical phase difference using a polarization technique

A method of measuring optical phase differences caused by the presence of optical path differences between two coherent light beams is reported. A polarization technique is used and the phase differences are detected as rotation angles of the plane of polarization. The sensitivity of the method is better than 10^-4λ and the stability is 3 X 10^-4λ per minute. These limitations result from thermal fluctuations of the order of 10^-3°C. A higher sensitivity of about 10^-5λ, or better, is expected if the effect due to thermal fluctuations can be reduced.     

Reducing measurement time for a laser Doppler vibrometer using regressive techniques

In the last decade the laser Doppler vibrometer (LDV) has become a widely spread instrument for measuring vibrations. It often offers accurate measurements with a high spatial resolution. However, the measurement time of the LDV and especially for the scanning LDV is long. Therefore, reducing the measurement time is an attractive objective. A way to achieve this is to use a single sine excitation (on a resonance frequency). However, this technique has two major drawbacks: the inability to provide information on the damping and a operational deflection shape that can differ from the true mode shape. In this article two methods will be introduced to reduce measurement time without these defaults. In the first method introduced in this article a narrow band multisine is used as excitation signal and the measured vibration signal in the time domain is represented by a model using sines and cosines with these fixed narrow band frequencies. The coefficients of those sines and cosines are then estimated on a global scale by means of a least-squares estimator. An important advantage of this particular technique is that one does not have to measure a full period of the signal, reducing time. The second method accelerates the measurement time for scanning LDV measurements. Using the time domain sequence from each previous scan point and a limited number of time samples from the current scan point, the full time domain sequence of the current scan point can be estimated. Both these methods are a key benefit for in-line quality control, which can have upwards of 1000 spatial measurement locations. The proposed techniques will be validated on both simulations and experiments of varying complexity.     

Temperature-insensitive strain measurement using differential double Bragg grating technique

A novel differential double Bragg grating sensor for temperature-insensitive strain measurement is presented. The sensor consists of two identical weak measuring and reference gratings separated by some distance. The reference grating is placed inside the silica capillary that made it almost strain insensitive. The basic idea in differential double Bragg grating sensor is to measure the energy of the oscillating term in the reflection spectrum of double Bragg grating structure. The normalized energy of the interference term depends on the pitch difference of the two gratings and does not change when pitch variations of both gratings are equal with temperature variation. Therefore, the normalized energy of the interference term can be used for the temperature-insensitive strain measurement.     

Real-time measurement of nano-particle size using differential optical phase detection

We demonstrate a size sensing technique for nano-particles using optical differential phase measurement by a dual fiber interferometer through phase-generated carrier(PGC) demodulation. Nano-particle diameters are obtained from the differential phase shift as a result of adding an optical scattering perturbation into two-beam interference. Polystyrene nano-particles with diameters from 200 to 900 nm in a microfluidic channel are detected using this technique to acquire real-time particle diameters. Compared with amplitude sensing with over 10 mW of laser irradiance, particle sizing by PGC phase sensing can be achieved at a laser power as low as1.18 mW. We further analyze major sources of noise in order to improve the limits of detection. This sensing technique may find a broad range of applications from the real-time selection of biological cell samples to rare cell detection in blood samples for early cancer screening.     

Studies of divacancy in Si using positron lifetime measurement

The charge state dependence of positron lifetime and trapping at divacancy (V₂) in Si doped with phosphorus or boron has been studied after 15 McV electron irradiation up to a fluence of 8.0×10¹⁷ e/cm². The positron trapping cross sections for V ₂ ^2– , V ₂ ^– and V ₂ ⁰ at 300 K were about 6×10^–14, 3×10^–14 and 0.1–3×10^–14 cm², respectively. For V ₂ ⁺ , however, no positron trapping was observed. The marked difference in the cross sections comes from Coulomb interaction between the positron and the charged divacancy. The trapping rates for V ₂ ⁰ and V ₂ ^2– have been found to increase with decreasing temperature in the temperature range of 10–300 K. These results are well interpreted by a two-stage trapping model having shallow levels with energy of 9 meV (V ₂ ⁰ ) and 21 meV (V ₂ ^2– ). The appearance of a shallow level for V ₂ ⁰ can not be explained by a conventional Rydberg state model. The lifetime (290–300 ps) in V ₂ ⁰ is nearly constant in the temperature range from 10 to 300 K, while that in V ₂ ^2– increases from 260 ps at 10 K to 320 ps at 300 K. The lifetime (260 ps) in V ₂ ^2– is shorter than that in V ₂ ⁰ at low temperature, which is due to the excess electron density in V ₂ ^2– . At high temperature, however, the longer lifetime of V ₂ ^2– than that of V ₂ ⁰ is attributed to lattice relaxation around V ₂ ^2– .     

Gradient measurement technique to identify phase transitions in nano-dispersed liquid crystalline compounds

Characterization and phase transitions in pure and 0.5% BaTiO₃ nano-dispersed liquid crystalline (LC) N-(p-n-heptyloxybenzylidene)-p-n-nonyloxy aniline, 7O.O9, com-pounds are carried out using a polarizing microscope attached with hot stage and camera. We observed that when any of these images are distorted, different local structures suffer from various degradations in a gradient magnitude. So, we examined the pixel-wise gradient magnitude similarity between the reference and distorted images combined with a novel pooling strategy – the standard deviation of the GMS map – to determine the overall phase transition variations. In this regard, MATLAB software is used for gradient measurement technique to identify the phase transitions and transition temperature of the pure and nano-dispersed LC compounds. The image analysis of this method proposed is in good agreement with the standard methods like polarizing microscope (POM) and differential scanning calorimeter (DSC). 0.5% BaTiO₃ nano-dispersed 7O.O9 compound induces cholesteric phase quenching the nematic phase, which the pure compound exhibits.     

基于反相位脉冲技术的生物组织谐波成像研究

理论及实验研究了反相位脉冲技术在生物组织二次谐波成像中的应用。结合有限振幅声波的非线性传播理论,从理论上证明了反相位脉冲技术可有效抑制基波信号,同时二次谐波信号增强两倍,轴向及径向声场的实验测量结果基波被抑制30~50dB,二次谐波提高6dB,与理论相符。建立了相应的成像系统,对若干生物离体组织进行了基于反相位脉冲相位技术的二次谐波成像,并与常规的基波及二次谐波图像对比,进一步证明了该技术能有效提高图像的对比度和清晰度。     

Single detector-based absolute velocity measurement using spectral domain Doppler optical coherence tomography

We propose an approach for absolute velocity measurement where the use of a beam displacer provides two orthogonal linearly polarized beams to probe the sample simultaneously at two different incidence angles. The approach helps remove the cross talk image and facilitates single detector-based Fourier domain Doppler velocity measurement. The system has been characterized by quantifying absolute flow velocity in a flow phantom.