M3NS3, die ersten Nitridsulfide der Lanthanide (M = La?Nd,Sm)

M₃NS₃, the First Nitride Sulfides of the Lanthanides (M = La? Nd, Sm) . The oxidation of the “light” lanthanides (M = La? Nd, Sm) with equimolar amounts of sulfur in the presence of NaN₃ as nitrogen source results in the formation of the first lanthanide nitride sulfides: M₃NS₃ (evacuated silica vessels, some NaCl as flux, 850°C, 7 d). NaCl is afterwards removed from the not moisture sensitive crude product (faint- or orange-yellow to amber-co- loured transparent needles, oftenly intergrown to feltlike bunches) upon rinsing with water. The crystal structure was determined from X-ray single crystal data for the example of Sm₃NS₃ (orthorhombic, Pnma (no. 62), a = 1 201.18(7), b = 394.32(3), c = 1 285.27(6) pm, Z = 4, R = 0.027, R_w = 0.024), and M₃NS₃ (M = La? Nd) proved to be isostructural from Guinier powder data. There are three crystallographically different M³⁺ cations in six- (1 X) and sevenfold (2 X) coordination of the N^3? and S^2? anions. [(N^3?)(M³⁺)₄] tetrahedra connected via two corners forming linear chains [N(M1)_1/1(M2)_1/1(M3)_2/2] ⁶⁺ build up the main structural feature. Arranged in the manner of a closest packing of rods, they are held together by three crystallographically different S^2? which take care for charge neutrality and three-dimensional interconnection.     

Nitridsulfidchloride der Lanthanide: I. Der Formeltyp M4NS3Cl3 (M = La?Nd)

Nitride Sulfide Chlorides of the Lanthanides. I. The Composition M₄NS₃Cl₃ (M = La Nd) The oxidation of the „light”︁ lanthanides (M = La Nd) with sulfur and NaN₃ the presence of the chlorides MCl₃ results in the formation of the first lanthanide nitride sulfide chlorides M₄NS₃Cl₃ when appropriate molar ratios of the reactants are used. The addition of some NaCl (or an excess of MCl₃) as a flux secures complete and fast reaction (7 d) at 850°C in evacuated silica vessels as well as single-crystalline products. Since these nitride sulfide chlorides (fine transparent needles) are not sensitive against hydrolysis, the surplus chloride can be removed easily with water. The crystal structure was determined from X-ray single crystal data for the example of La₄NS₃Cl₃ (hexagonal, P6₃mc (no. 186), Z = 2, a = 941.40(3), c = 700.36(3) pm, R = 0.026, R_w = 0.021) and the nitride sulfide chlorides M₄NS₃Cl₃ with M = Ce Nd proved to be isostructural from Guinier powder data. According to their Ba₃OCl₆-analogue structure, two crystallographically different M³⁺ cations are present (CN(M1) = 10, CN(M2) = 8). „Isolated”︁ tetrahedra [(N³⁻)(M³⁺)₄] build up the Mayn structural feature according to [NM₄]S₃Cl₃. They are hexagonally closest packed and interconnected via the crystallographically different but by X-ray diffraction indistinguishable anions S²⁻ and Cl⁻, which take care for charge neutrality.     

Nitridsulfidchloride der Lanthanide: II. Der Formeltyp M6N3S4Cl (M = La?Nd)

Nitride Sulfide Chlorides of the Lanthanides. II. The Composition M₆N₃S₄Cl (M = La? Nd) The oxidation of the “light” lanthanides (M = La? Nd) with sulfur and NaN₃ in the presence of the chlorides MCl₃ yields chlorine-poor nitride sulfide chlorides with the composition M₆N₃S₄Cl when appropriate molar ratios of the reactants are used. Additional NaCl as a flux secures complete and fast reactions (7 d) at 850°C in evacuated silica vessels as well as single-crystalline products (red-brown needles). The crystal structure was determined from X-ray single crystal data for the limiting representatives La₆N₃S₄Cl (orthorhombic, Pnma (no. 62), Z = 4, a = 1159.7(4), b = 410.95(7), c = 2756.8(9)pm, R = 0.030, R_w = 0.027) and Nd₆N₃S₄Cl (a = 1137.1(3), b = 399.34(6), c = 2687.6(9)pm, R = 0.034, R_w = 0.033). Guinier powder data revealed the cerium and praseodymium analogues to be isotypic. The crystal structure exhibits two different chains of connected [NM₄] tetrahedra which are commensurate in translation. Six crystallographically different M³⁺ are present, two of them (M1 and M2) build up the chain [(N1)(M1) · (M2)]³⁺ together with (N1)^3? by cis-edge connection of tetrahedra. The four remainders (M3? M6) arrange as pairs [N₂M₆] of edge-shared [NM₄] tetrahedra with (N2)^3? and (N3)^3? which are further connected via four vertices to form the [(M5)(N-2){(M3)_(1+1)/(1+1)(M4)_(1+1)/(1+1))}^e(N3)(M6)]⁶⁺ double chain. Bundled along [010] like a closest packing of rods, both types of chains are held together by five crystallographically different but by X-ray diffraction indistinguishable anions S^2? (S1? S4) and Cl^? adjusting the charge balance in a molar ratio of 4:1.     

Alkyne Insertion into the M?P and M?H Bonds (M=Pd,Ni, Pt,and Rh): A Theoretical Mechanistic Study of the C?P and C?H Bond‐Formation Steps

In hydrogen‐metal‐phosphorus (H M P) transition metal complexes (proposed as intermediates of H P bond addition to alkynes in the catalytic hydrophosphorylation, hydrophosphinylation, and hydrophospination reactions), alkyne insertion into the metal‐hydrogen bond was found much more facile compared to alkyne insertion into the metal‐phosphorus bond. The conclusion was verified for different metals (Pd, Ni, Pt, and Rh), ligands, and phosphorus groups at various theory levels (B3LYP, B3PW91, BLYP, MP2, and ONIOM). The relative reactivity of the metal complexes in the reaction with alkynes was estimated and decreased in the order of Ni>Pd>Rh>Pt. A trend in relative reactivity was established for various types of phosphorus groups: PR₂>P(O)R₂>P(O)(OR)₂, which showed a decrease in rate upon increasing the number of the oxygen atoms attached to the phosphorus center.     

Hydride Reactivity of NiII?X?NiII Entities: Mixed‐Valent Hydrido Complexes and Reversible Metal Reduction

After the lithiation of PYR‐H₂ (PYR^2?=[{NC(Me)C(H)C(Me)NC₆H₃(iPr)₂}₂(C₅H₃N)]^2?), which is the precursor of an expanded β‐diketiminato ligand system with two binding pockets, its reaction with [NiBr₂(dme)] led to a dinuclear nickel(II)–bromide complex, [(PYR)Ni(μ‐Br)NiBr] ( 1 ). The bridging bromide ligand could be selectively exchanged for a thiolate ligand to yield [(PYR)Ni(μ‐SEt)NiBr] ( 3 ). In an attempt to introduce hydride ligands, both compounds were treated with KHBEt₃. This treatment afforded [(PYR)Ni(μ‐H)Ni] ( 2 ), which is a mixed valent Ni^I? μ‐H? Ni^II complex, and [(PYR‐H)Ni(μ‐SEt)Ni] ( 4 ), in which two tricoordinated Ni^I moieties are strongly antiferromagnetically coupled. Compound 4 is the product of an initial salt metathesis, followed by an intramolecular redox process that separates the original hydride ligand into two electrons, which reduce the metal centres, and a proton, which is trapped by one of the binding pockets, thereby converting it into an olefin ligand on one of the Ni^I centres. The addition of a mild acid to complex 4 leads to the elimination of H₂ and the formation of a Ni^IINi^II compound, [(PYR)Ni(μ‐SEt)NiOTf] ( 5 ), so that the original Ni^II(μ‐SEt)Ni^IIX core of compound 3 is restored. All of these compounds were fully characterized, including by X‐ray diffraction, and their molecular structures, as well as their formation processes, are discussed.     

B?H,C?H,and B?C Bond Activation: The Role of Two Adjacent Agostic Interactions

Tuning the nature of the linker in a L∼BHR phosphinoborane compound led to the isolation of a ruthenium complex stabilized by two adjacent, δ‐C H and ε‐B_sp2 H, agostic interactions. Such a unique coordination mode stabilizes a 14‐electron “RuH₂P₂” fragment through connected σ‐bonds of different polarity, and affords selective B H, C H, and B C bond activation as illustrated by reactivity studies with H₂ and boranes.     

M4(CH2)4 Cubane‐Type Rare‐Earth Methylidene Complexes: Unique Reactivity toward Unsaturated C?O,C?N,and C?S Bonds

The reactivity of the cubane‐type rare‐earth methylidene complex [Cp′Lu(μ₃‐CH₂)]₄ ( 1 , Cp′=C₅Me₄SiMe₃) with various unsaturated electrophiles was investigated. The reaction of 1 with CO (1 atm) at room temperature gave the bis(ketene dianion)/dimethylidene complex [Cp′₄Lu₄(μ₃‐CH₂)₂(μ₃,η²‐O‐C?CH₂)₂] ( 2 ) in 86 % yield through the insertion of two molecules of CO into two of the four lutetium–methylidene units. In the reaction with the sterically demanding N,N‐diisopropylcarbodiimide at 60 °C, only one of the four methylidene units in 1 reacted with one molecule of the carbodiimide substrate to give the mono(ethylene diamido)/trimethylidene complex [Cp′₄Lu₄(μ₃‐CH₂)₃{iPrNC(=CH₂)NiPr}] ( 3 ) in 83 % yield. Similarly, the reaction of 1 with phenyl isothiocyanate gave the ethylene amido thiolate/trimethylidene complex [Cp′₄Lu₄(μ₃‐CH₂)₃{PhNC(S)=CH₂}] ( 4 ). In the case of phenyl isocyanate, two of the four methylidene units in 1 reacted with four molecules of the substrate at ambient temperature to give the malonodiimidate/dimethylidene complex [Cp′₄Lu₄(μ₃‐CH₂)₂{PhN=C(O)CH₂(O)C?NPh}₂] ( 5 ) in 87 % yield. In this reaction, each of the two lutetium–methylidene bonds per methylidene unit inserted one molecule of phenyl isocyanate. All the products have been fully characterized by NMR spectroscopy, X‐ray diffraction, and microelemental analyses.     

Dehydrogenation of Amine?Borane Me2NH⋅BH3 Catalyzed by a Lanthanum?Hydride Complex

The rare‐earth‐metal? hydride complexes [{(1,7‐Me₂TACD)LnH}₄] (Ln=La 1 a , Y 1 b ; (1,7‐Me₂TACD)H₂=1,7‐dimethyl‐1,4,7,10‐tetraazacyclododecane, 1,7‐Me₂[12]aneN₄) were synthesized by hydrogenolysis of [{(1,7‐Me₂TACD)Ln(η³‐C₃H₅)}₂] with 1 bar H₂. The tetrameric structures were confirmed by ¹H NMR spectroscopy and single‐crystal X‐ray diffraction of compound 1 a . Both complexes catalyze the dehydrogenation of secondary amine? borane Me₂NH ? BH₃ to afford the cyclic dimer (Me₂NBH₂)₂ and (Me₂N)₂BH under mild conditions. Whilst the complete conversion of Me₂NH ? BH₃ was observed within 2 h with lanthanum? hydride 1 a , the yttrium homologue 1 b required 48 h to reach 95 % conversion. Further reactions of compound 1 a with Me₂NH ? BH₃ in various stoichiometric ratios gave a series of intermediate products, [{(1,7‐Me₂TACD)LaH}₄](Me₂NBH₂)₂ ( 2 a ), [(1,7‐Me₂TACDH)La(Me₂NBH₃)₂] ( 3 a ), [(1,7‐Me₂TACD)(Me₂NBH₂)La(Me₂NBH₃)] ( 4 a ), and [(1,7‐Me₂TACD)(Me₂NBH₂)₂La(Me₂NBH₃)] ( 5 a ). Complexes 2 a , 3 a , and 5 a were isolated and characterized by multinuclear NMR spectroscopy and single‐crystal X‐ray diffraction studies. These intermediates revealed the activation and coordination modes of “Me₂NH ? BH₃” fragments that were trapped within the coordination sphere of a rare‐earth‐metal center.     

Homolytic S?S Bond Dissociation of 11 Bis(thiocarbonyl)disulfides R‐C(S)?S?S?C(S)R and Prediction of A Novel Rubber Vulcanization Accelerator

The structures and energetics of eight substituted bis(thiocarbonyl)disulfides (RCS₂)₂, their associated radicals RCS₂^., and their coordination compounds with a lithium cation have been studied at the G3X(MP2) level of theory for R=H, Me, F, Cl, OMe, SMe, NMe₂, and PMe₂. The effects of substituents on the dissociation of (RCS₂)₂ to RCS₂^. were analyzed using isodesmic stabilization reactions. Electron‐donating groups with an unshared pair of electrons have a pronounced stabilization effect on both (RCS₂)₂ and RCS₂^.. The S? S bond dissociation enthalpy of tetramethylthiuram disulfide (TMTD, R=NMe₂) is the lowest in the above series (155 kJ mol^?1), attributed to the particular stability of the formed Me₂NCS₂^. radical. Both (RCS₂)₂ and the fragmented radicals RCS₂^. form stable chelate complexes with a Li⁺ cation. The S? S homolytic bond cleavage in (RCS₂)₂ is facilitated by the reaction [Li(RCS₂)₂]⁺+Li⁺→2 [Li(RCS₂)]^.+. Three other substituted bis(thiocarbonyl) disulfides with the unconventional substituents R=OSF₅, Gu¹, and Gu² have been explored to find suitable alternative rubber vulcanization accelerators. Bis(thiocarbonyl)disulfide with a guanidine‐type substituent, (Gu¹CS₂)₂, is predicted to be an effective accelerator in sulfur vulcanization of rubber. Compared to TMTD, (Gu¹CS₂)₂ is calculated to have a lower bond dissociation enthalpy and smaller associated barrier for the S? S homolysis.     

The ?NH?(C)?Br functionality of heteroaromatic compounds as a synthon for fused dihydrooxazoles

Fused dihydrooxazoles are produced by the reaction of 8‐bromoteophylline (1), 6‐bromo‐2‐pyridone (7), or 2‐bromobenzimidazole (11) with an N‐substituted N‐(2,3‐epoxypropyl)amine. The product derived from 1 undergoes rearrangement to a fused dihydrooxazine while the fused dihydrooxazoles derived from 7 and 11 are stable. J. Heterocyclic Chem., (2011).     

The Morita?Baylis?Hillman Reaction of Chiral Highly Oxygenated Cyclopent‐2‐enones

The Morita? Baylis? Hillman (MBH) reactions of (4S,5R,7R,8R)‐ and (4R,5R,7R,8R)‐4‐hydroxy‐7,8‐dimethoxy‐7,8‐dimethyl‐6,9‐dioxaspiro[4.5]dec‐2‐en‐1‐ones ( 2 and 3 , resp.) with aldehydes using various catalysts were studied. A combination of Bu₃P/phenol in THF was found being optimum conditions giving the corresponding MBH adducts with high diastereoisomeric ratios. After separation, each stereomerically pure isomer of the MBH adducts was subjected to hydrolysis employing 1% aq. CF₃COOH (TFA) in a water bath of an ultrasonic cleaner to afford the corresponding polyhydroxylated cyclopentenones in good yields.     

Catalytic C?C,C?N,and C?O Ullmann‐Type Coupling Reactions

Copper‐catalyzed Ullmann condensations are key reactions for the formation of carbon–heteroatom and carbon–carbon bonds in organic synthesis. These reactions can lead to structural moieties that are prevalent in building blocks of active molecules in the life sciences and in many material precursors. An increasing number of publications have appeared concerning Ullmann‐type intermolecular reactions for the coupling of aryl and vinyl halides with N, O, and C nucleophiles, and this Minireview highlights recent and major developments in this topic since 2004.     

Pressure‐Induced Intersite Bi?M (M=Ru, Ir) Valence Transitions in Hexagonal Perovskites

Pressure‐induced charge transfer from Bi to Ir/Ru is observed in the hexagonal perovskites Ba_3+nBiM_2+nO_9+3n (n=0,1; M=Ir,Ru). These compounds show first‐order, circa 1 % volume contractions at room temperature above 5 GPa, which are due to the large reduction in the effective ionic radius of Bi when the 6s shell is emptied on oxidation, compared to the relatively negligible effect of reduction on the radii of Ir or Ru. They are the first such transitions involving 4d and 5d compounds, and they double the total number of cases known. Ab initio calculations suggest that magnetic interactions through very short (ca. 2.6 Å) M M bonds contribute to the finely balanced nature of their electronic states.     

An efficient synthesis of phosphenimidous esters,RO?PN?Ar

Trimethylsilyltrifluoromethane sulfonate is shown to be an efficient catalyst for the elimination of Me₃SiCl from N-trimethylsilyl-N-(2,4,6-tri-tert-butylphenyl)amidochlorophosphites la-f , leading to the phosphenimidous esters 3a–f. The crystal structures of phosphites 1a and 1d provide a stereochemical explanation for the better thermal stability of 1d On the basis of these observations a convenient and general synthesis of phosphenimidous esters 3a–f is presented.     

Modeling the H bond donor strength of ?OH, ?NH,and ?CH sites by local molecular parameters

A quantum chemical model is introduced to predict the H‐bond donor strength of monofunctional organic compounds from their ground‐state electronic properties. The model covers ? OH, ? NH, and ? CH as H‐bond donor sites and was calibrated with experimental values for the Abraham H‐bond donor strength parameter A using the ab initio and density functional theory levels HF/6‐31G** and B3LYP/6‐31G**. Starting with the Morokuma analysis of hydrogen bonding, the electrostatic (ES), polarizability (PL), and charge transfer (CT) components were quantified employing local molecular parameters. With hydrogen net atomic charges calculated from both natural population analysis and the ES potential scheme, the ES term turned out to provide only marginal contributions to the Abraham parameter A, except for weak hydrogen bonds associated with acidic ? CH sites. Accordingly, A is governed by PL and CT contributions. The PL component was characterized through a new measure of the local molecular hardness at hydrogen, η(H), which in turn was quantified through empirically defined site‐specific effective donor and acceptor energies, EE_occ and EE_vac. The latter parameter was also used to address the CT contribution to A. With an initial training set of 77 compounds, HF/6‐31G** yielded a squared correlation coefficient, r², of 0.91. Essentially identical statistics were achieved for a separate test set of 429 compounds and for the recalibrated model when using all 506 compounds. B3LYP/6‐31G** yielded slightly inferior statistics. The discussion includes subset statistics for compounds containing ? OH, ? NH, and active ? CH sites and a nonlinear model extension with slightly improved statistics (r² = 0.92). © 2008 Wiley Periodicals, Inc. J Comput Chem 2009     

The nature of the N?O bond in amine oxides

Despite the ubiquitous presence of amine oxides in chemistry, there is no consensus about the nature of the N O bond in these compounds. In this work, we have used electron density analysis to investigate the nature of this bond in substituted amine oxides, R₃NO, and have compared it with the nature of the N O bond in hydroxylamines, R₂NOR, and model molecules that have well-established chemical bond character. The results showed that the N O bond length and relative stability are proportional to the inductive effect of the substituents. Quantum chemical topology, natural bond orbitals (NBO), and natural resonance theory (NRT) analyses indicated that the N O bond is polar covalent in all the studied amine oxides, but the ionic contribution is different. NBO and NRT analyses revealed that molecules with more electronegative substituents have strongly delocalized N O and N R bonds, whereas molecules with electropositive substituents have localized bonds.