Shape-controlled synthesis of highly monodisperse and small size gold nanoparticles

We describe here that fine control of nanoparticle shape and size can be achieved by systematic varia-tion of experimental parameters in the seeded growth procedure in aqueous solution. Cubic and spherical gold nanoparticles are obtained respectively. In particularly, the Au cubes are highly mono-disperse in 33±2 nm diameter. The experimental methods involve the preparation of Au seed particles and the subsequent addition of an appropriate quantity of Au seed solution to the aqueous growth solutions containing desired quantities of CTAB and ascorbic acid (AA). Here, AA is a weak reducing agent and CTAB is not only a stable agent for nanoparticles but also an inductive agent for leading increase in the face of nanoparticle. Ultraviolet visible spectroscopy (UV-vis), X-ray diffraction (XRD), transmission electron microscopy (TEM) are used to characterize the nanoparticles. The results show that the different size gold nanoparticles displayed high size homogenous distribution and formed mono-membrane at the air/solid interface.     

Environmentally friendly synthesis of highly monodisperse biocompatible gold nanoparticles with urchin-like shape

We report a facile and environmentally friendly strategy for high-yield synthesis of highly monodisperse gold nanoparticles with urchin-like shape. A simple protein, gelatin, was first used for the control over shape and orientation of the gold nanoparticles. These nanoparticles, ready to use for biological systems, are promising in the optical imaging-based disease diagnostics and therapy because of their tunable surface plasmon resonance (SPR) and excellent surface-enhanced Raman scattering (SERS) activity.     

Magnetic properties of monodisperse NiHx nanoparticles and comparison to those of monodisperse Ni nanoparticles

We produced, for the first time, monodisperse NiH(x) nanoparticles with particle diameters of 7.0 nm and investigated their magnetic properties. We also produced monodisperse Ni nanoparticles with nearly the same particle diameters as those of NiH(x) nanoparticles as a comparison. The magnetic properties of NiH(x) nanoparticles were quite different from those of Ni nanoparticles. We observed two compositional phases in NiH(x) nanoparticles, similar to bulk material: one is the nearly pure Ni phase with the blocking temperature (T(B)) of 11 K and the other is the hydride phase. We observed T(B) of 40 K in Ni nanoparticles.     

Functionalization of monodisperse magnetic nanoparticles

We report a new strategy for the preparation of monodisperse, water-soluble magnetic nanoparticles. Oleic acid-stabilized magnetic nanocrystals were prepared by the organic synthesis route proposed by Sun et al. (J. Am. Chem. Soc. 2004, 126, 273.), with size control obtained via seeded-mediated growth. The oleic groups initially present on the nanoparticle surfaces were replaced via ligand exchange reactions with various capping agents bearing reactive hydroxyl moieties. These hydroxyl groups were (i) exploited to initiate ring opening polymerization (ROP) of polylactic acid from the nanoparticle surfaces and (ii) esterified by acylation to permit the addition of alkyl halide moieties to transform the nanoparticle surfaces into macroinitiators for atom transfer radical polymerization (ATRP). By appropriate selection of the ligand properties, the nanoparticle surfaces can be polymerized in various solvents, providing an opportunity for the growth of a wide variety of water-soluble polymers and polylectrolyte brushes (both cationic and anionic) from the nanoparticle surfaces. The nanoparticles were characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), electron microscopy, and light scattering. Light scattering measurements indicate that the nanoparticles are mostly present as individual nonclustered units in water. With pH-responsive polymers grown on the nanoparticle surfaces, reversible aggregation of nanoparticles could be induced by suitable swings in the pH between the stable and unstable regions.     

Quantised charging of monolayer-protected nanoparticles

Metal nanoparticles coated with an organic monolayer, so-called monolayer protected clusters (MPCs), can show quantised charging at room temperature due to their sub-attofarad capacitance arising from the core size and the nature of the protecting monolayer. In this tutorial review, we examine the factors affecting the energetics of MPC charging. In the first section, the underlying physics of quantised charging is outlined and we give an overview of the various methods that can be used to measure single electron transfer to nanoparticles. In the subsequent sections, we discuss how electrochemical measurements can be used to give information on the quantised charging of freely diffusing and films of immobilised MPCs. The predictions of models used to determine MPC capacitance are compared with experimental data from the literature.     

Synthesis and stabilization of monodisperse Fe nanoparticles

Monodisperse Fe nanoparticles are synthesized via a simple one-pot thermal decomposition of Fe(CO)5 in the presence of oleylamine. Controlled oxidation of the iron surface leads to crystalline Fe3O4 shell and results in dramatic increase of chemical and dispersion stability of the nanoparticles. Surface ligand exchange is readily applied to transfer the core/shell nanoparticles from hydrophobic to hydrophilic, and a stable aqueous nanoparticle dispersion in PBS is formed. The functionalized nanoparticles are suitable for biomolecule attachment and biomedical applications.     

Near monodisperse TiO2 nanoparticles and nanorods

Highly crystalline, near monodisperse TiO2 nanoparticles, nanorods and their metal-ion-doped (Sn4+, Fe3+, Co2+, and Ni2+, etc.) derivatives have been prepared by well-controlled solvothermal reactions. Through adjusting the reaction parameters, such as reaction temperature, duration, and concentration of the reactants, the size, shape, and dispersibility of the products can be controlled. A possible reaction mechanism can be proposed based on experimental evidence.     

Anionic-cationic switchable amphoteric monodisperse mesoporous silica nanoparticles

Anionic-cationic switchable monodisperse mesoporous silica nanoparticles were synthesized by one-pot amino and carboxylic acid bifunctionalization based on the self-assembly of the surfactant, two types of co-structure-directing agents containing amino and carboxylic groups, and silica sources. These nanoparticles revealed properties of dispersity and reversibility, with the advantage of the pH-responsive anionic-cationic/acid-base switchability. It was demonstrated that the extracted materials achieved reutilization and controllable dispersity in aqueous solution by adjusting the static electric power among the particles during the switching process.     

Extraction of monodisperse palladium nanoparticles from dendrimer templates

We describe a strategy for extracting nearly size-monodisperse, 1.7-nm-diameter Pd nanoparticles from within dendrimer hosts. The approach involves two steps. First, an aqueous solution of dendrimer-encapsulated Pd nanoparticles is prepared, followed by the addition of a toluene solution containing an n-alkanethiol. When the two-phase system is stirred, n-alkanethiols presumably self-assemble onto the surface of the Pd nanoparticles, extract them from the dendrimer, and transport them to toluene phase. UV-vis spectroscopy indicates that the Pd nanoparticles, in the form of monolayer-protected clusters, are transported into the toluene phase. FT-IR spectroscopy shows that the dendrimers remain in the aqueous phase. High-resolution transmission electron microscopy shows that the average size and size distribution of the particles do not change during the extraction process.     

Synthesis and characterization of monodisperse silica-polyaniline core-shell nanoparticles

Monodisperse silica-polyaniline core-shell nanoparticles with an average diameter of 26 nm were synthesized by in-situ polymerisation of aniline monomers adsorbed on the silica surface through electrostatic interactions.     

One-step synthesis of monodisperse water-soluble 'dual-responsive' magnetic nanoparticles

Monodisperse water-soluble Co and gamma-Fe(2)O(3) nanoparticles have been prepared in a single-step method using stimuli-sensitive polymers.     

Highly monodisperse bismuth nanoparticles and their three-dimensional superlattices

A simple and reproducible synthesis of highly monodisperse and ligand-protected bismuth nanoparticles (Bi NPs) is reported. The size of the single-crystalline and spherically shaped NPs is controlled between 11 and 22 nm mainly by the reaction temperature. The high uniformity of the NPs allows their self-assembly into long-range-ordered two- and three-dimensional superstructures.     

Facile preparation of controllable size monodisperse anatase titania nanoparticles

Monodisperse anatase titania nanoparticles with controllable sizes (typically 10-300 nm) can be synthesized using an efficient and straightforward protocol via fine tuning of the ionic strength in the devised sol-gel methodology.     

The charging properties of monodisperse colloidal silica in symmetrical quaternary ammonium ion solutions

The zeta potentials of monodisperse colloidal silica were measured as a function of pH and as a function of the concentration of tetramethyl-, tetrapropyl-, and tetrapentylammonium bromide in aqueous solution. The variation of the potential with pH was explained by a simple, point ion adsorption model from which a dissociation constant and Gibbs free energy of dissociation were obtained. By contrast, the results obtained with tetraalkyl ammonium ions could not be explained using this simple model. However, incorporation of a hydrophobic adsorption term and finite ion size in a more sophisticated model gave good agreement with experimental measurements. The validity of the model is supported by the reasonable dissociation constants which were obtained on fitting the experimental data. Dissociation constants and the corresponding Gibbs free energies were calculated for both hydrophobic and site binding adsorption for each tetraalkyl ammonium ion. The stability of colloidal silica in solutions of these ions can now be satisfactorily explained in terms of the electrostatic repulsion between particles rather than by a hydrophobic/hydrophilic solvation effect previously proposed.     

Rapid synthesis of highly monodisperse Au(x)Ag(1-x) alloy nanoparticles via a half-seeding approach

Gold-silver alloy Au(x)Ag(1-x) is an important class of functional materials promising new applications across a wide array of technological fields. In this paper, we report a fast and facile synthetic protocol for preparation of highly monodisperse Au(x)Ag(1-x) alloy nanoparticles in the size range of 3-6 nm. The precursors employed in this work are M(I)-alkanethiolates (M = Au and Ag), which can be easily prepared by mixing common chemicals such as HAuCl(4) or AgNO(3) with alkanethiols at room temperature. In this half-seeding approach, one of the M(I)-alkanethiolates is first heated and reduced in oleylamine solvent, and freshly formed metal clusters will then act as premature seeds on which both the first and second metals (from M(I)-alkanethiolates, M = Au and Ag) can grow accordingly without additional nucleation and thus achieve high monodispersity for product alloy nanoparticles. Unlike in other prevailing methods, both Au and Ag elements present in these solid precursors are in the same monovalent state and have identical supramolecular structures, which may lead to a more homogeneous reduction and complete interdiffusion at elevated reaction temperatures. When the M(I)-alkanethiolates are reduced to metallic forms, the detached alkanethiolate ligands will serve as capping agent to control the growth. More importantly, composition, particle size, and optical properties of Au(x)Ag(1-x) alloy nanoparticles can be conveniently tuned with this approach. The optical limiting properties of the prepared particles have also been investigated at 532 and 1064 nm using 7 ns laser pulses, which reveals that the as-prepared alloy nanoparticles exhibit outstanding broadband optical limiting properties with low thresholds.     

Electrodeposition of monodispersed metal nanoparticles in a nafion film: Towards highly active nanocatalysts

We have explored a new and facile method for the fabrication of metal nanoparticles on the electrode surface. The approach for fabricating metal nanoparticles was carried out by two steps consisting of ion-exchange in nafion film coated on the electrode and subsequent reduction of metal ions to metallic nanoparticles by electrochemical method. The results of characterization by TEM show that metal nanoparticles were nearly monodispersed in the whole nafion film. The average diameters of Cu, Co and Ni nanoparticles were statistically measured to be 5.1 nm ± 0.2 nm, 4.6 nm ± 0.2 nm and 4.7 nm ± 0.2 nm, respectively. The amount of metal nanoparticles can be readily controlled by the amount of nafion coated on the electrode. By performing the H₂O₂ reduction at the obtained Cu nanoparticles, the high electrocatalytic activity of metal nanoparticles fabricated has been confirmed.     

一种制备均匀单分散CeO2纳米微粒的新方法

利用改进的两相液流法制备了均匀单分散的ＣｅＯ２纳米微粒,用透射电子显微镜、Ｘ射线衍射仪对样品进行了形貌和结构表征。     

One-step preparation of highly monodisperse micron-size particles in organic solvents

In this communication, we report the first simple and fast one-step method for synthesizing highly monodisperse micron-size PMMA particles in organic media through dispersion polymerization in the presence of PHSA (a polyhydroxyl-stearic-acid graft PMMA copolymer) as a stabilizer. There are two significant advantages of our method over earlier methods. First, by optimizing the composition of a solvent mixture of hexane and dodecane, we were able to increase the concentration of monomer up to 50-56% and obtain unusually large (up to 10 mum in diameter) PMMA particles. Second, by strictly controlling the nucleation time, we were able to make PMMA particles with a low polydispersity of around 1%, much lower than has ever before been achieved for such large particles. We also report an unusual apparent metastable state in the nucleation stage.     

Solvent effect on the synthesis of monodisperse amine-capped Au nanoparticles

A remarkable solvent effect in a single-phase synthesis of monodisperse amine-capped Au nanoparticles is demonstrated.Oleylamine-capped Au nanoparticles were prepared via the reduction of HAuCU by an amine-borane complex in the presence of oleylamine in an organic solvent.When linear or planar hydrocarbon(e.g.,n-hexane,n-octane,1-octadecylene,benzene,and toluene) was used as the solvent, high-quality monodisperse Au nanoparticles with tunable sizes were obtained.However,Au nanoparticles with poor size dispersity were obtained when tetralin,chloroform or cyclohexane was used as the solvent.The revealed solvent effect allows the controlled synthesis of monodisperse Au nanoparticles with tunable size of 3-10 nm.