Studies in chlorin chemistry. 3. A practical synthesis of c,d-ring symmetric chlorins of potential utility in photodynamic therapy

[reaction: see text] C,D-ring symmetric chlorins 8 were prepared in 47-85% yield, on scales up to several hundred milligrams, by condensation of appropriately substituted bis-formyldihydrodipyrrins 6 and dipyrromethane bis-carboxylic acids 7 in 5% TFA/CH2Cl2 (25 examples). Target chlorins were chosen to systematically probe the effect of lipophilic and hydrophilic substituents on tissue partitioning and cellular membrane penetration in photodynamic therapy (PDT).     

New syntheses of the C,D-ring pyrromethenones of phytochrome and phycocyanin

Pyrromethenone 7, the C,D-ring segment of phytochrome (Pr, 4), has been prepared in an efficient fashion employing three new strategies. Each of these has potential advantages for the synthesis of labeled material. Our first approach is related to the Gossauer synthesis, with the difference that strong alkali is avoided in the condensation of the C- and D-ring components 8 and 17. The key silyloxypyrrole 17 was readily prepared on multigram scales beginning with inexpensive butyrolactone (10). A second synthesis began with 2-acetylbutyrolactone (41). The key steps involved conversion of 41 to the Z-enoltriflate 42, followed by Pd(0)-catalyzed coupling with trimethylsilylacetylene, p-chlorophenylselenide ring opening, and finally, amidation to afford the ring-D synthon 45 having the proper geometry and oxidation state for conversion to 7. Sonogashira coupling of 45 with the iodopyrrole 22, followed by oxidative elimination, and F(-)-induced 5-exo-dig cyclization of the resultant pyrroloalkyne 47, then completed the synthesis. In similar fashion, we have also prepared pyrromethenone 6, the C,D-ring segment of phycocyanin (2).     

Simple approach to "locked" chlorins

[reaction: see text] A novel synthetic approach to diversely functionalized "locked" chlorins is described. A suitably substituted 2,5-diformylpyrrole undergoes the macrocyclization reaction with tripyrranes, thereby generating porphyrins. Upon the reaction with 1,3-dipoles these porphyrins regioselectively furnish pyrrolidine-fused chlorins, which cannot oxidize to the corresponding porphyrins. In the process involving just six steps from commercially available and cheap materials we are able to obtain approximately 200 mg of pure stable chlorins (the overall yield is 1.5-2.8%).     

Rational synthesis of meso-substituted chlorin building blocks

Chlorins provide the basis for plant photosynthesis, but synthetic model systems have generally employed porphyrins as surrogates due to the unavailability of suitable chlorin building blocks. We have adapted a route pioneered by Battersby to gain access to chlorins that bear two meso substituents, a geminal dimethyl group to lock in the chlorin hydrogenation level, and no flanking meso and beta substituents. The synthesis involves convergent joining of an Eastern half and a Western half. A 3,3-dimethyl-2,3-dihydrodipyrrin (Western half) was synthesized in four steps from pyrrole-2-carboxaldehyde. A bromodipyrromethane carbinol (Eastern half) was prepared by sequential acylation and bromination of a 5-substituted dipyrromethane followed by reduction. Chlorin formation is achieved by a two-flask process of acid-catalyzed condensation followed by metal-mediated oxidative cyclization. The latter reaction has heretofore been performed with copper templates. Investigation of conditions for this multistep process led to copper-free conditions (zinc acetate, AgIO(3), and piperidine in toluene at 80 degrees C for 2 h). The zinc chlorin was obtained in yields of approximately 10% and could be easily demetalated to give the corresponding free base chlorin. The synthetic process is compatible with a range of meso substituents (p-tolyl, mesityl, pentafluorophenyl, 4-[2-(trimethylsilyl)ethynyl]phenyl, 4-iodophenyl). Altogether four free base and four zinc chlorins have been prepared. The chlorins exhibit typical absorption spectra, fluorescence spectra, and fluorescence quantum yields. The ease of synthetic access, presence of appropriate substituents, and characteristic spectral features make these types of chlorins well suited for incorporation in synthetic model systems.     

Synthesis of heterocycle‐substituted pyropheophorbide derivatives

Methyl pyropheophorbide‐a (MPPa) ( 1 ) was converted to two aldehydes, methyl 2‐formylmethyl‐2‐devinylpyropheophorbide‐a ( 2 ) and methyl 2‐formyl‐2‐devinylpyropheophorbide‐a ( 3 ). The former 2 reacted with active methylene compounds having a cyano function in the presence of sulfur to afford thiophene‐substituted chlorins 5a‐c and reacted with arylhydrazines to yield indole‐substituted chlorins 6a‐d . From the latter 3 , a α‐diketo chlorin 7 was obtained via Wittig reaction and oxidation. Compound 7 reacted with o‐phenylenediamine to afford 2‐quinoxalyl‐substituted pyropheophorbide‐a 8. The reaction of MPPa ( 1 ) with anthranilamide to give a spiro‐substituted compound 9 .     

Synthetic chlorins bearing auxochromes at the 3- and 13-positions

Synthetic chlorins bearing diverse auxochromes at the 3- and 13-positions of the macrocycle are valuable targets given their resemblance to chlorophylls a and b, which bear 3-vinyl and 13-keto groups. A de novo route has been exploited to construct nine zinc chlorins bearing substituents at the 3- and 13-positions and two benchmark zinc chlorins lacking such substituents. The chlorins are sterically uncongested and bear (1) a geminal dimethyl group in the reduced pyrroline ring, (2) a H, an acetyl, a triisopropylsilylethynyl (TIPS-ethynyl), or a vinyl at the 3-position, (3) a H, an acetyl, or TIPS-ethynyl at the 13-position, and (4) a H or a mesityl at the 10-position. The synthesis of the 13-substituted chlorins relied on p-TsOH x H2O-catalyzed condensation of an 8,9-dibromo-1-formyldipyrromethane (eastern half) and 2,3,4,5-tetrahydro-1,3,3-trimethyldipyrrin (western half), followed by metal-mediated oxidative cyclization, affording the 13-bromochlorin. Similar use of a bromo- or TIPS-ethynyl-substituted western half provided access to 3-substituted chlorins. A 3-bromo, 13-bromo, or 3,13-dibromochlorin was further transformed by Pd-coupling to introduce the vinyl group (via tributylvinyltin), TIPS-ethynyl group (via TIPS-acetylene), or acetyl group (via tributyl(1-ethoxyvinyl)tin, followed by acidic hydrolysis). In the 10-mesityl-substituted zinc chlorins, the series of substituents, 3-vinyl, 13-TIPS-ethynyl, 3-TIPS-ethynyl, 13-acetyl, 3,13-bis(TIPS-ethynyl), 3-TIPS-ethynyl-13-acetyl, or 3,13-diacetyl, progressively causes (1) a redshift in the absorption maximum of the B band (405-436 nm) and the Q(y) band (606-662 nm), (2) a relative increase in the intensity of the Q(y) band (I(B)/I(Q) = 4.2-1.5), and (3) an increase in the fluorescence quantum yield phi(f) (0.059-0.29). The zinc chlorins bearing a 3-TIPS-ethynyl-13-acetyl or a 3,13-diacetyl group exhibit a number of spectral properties resembling those of chlorophyll a or its zinc analogue. Taken together, this study provides access to finely tuned chlorins for spectroscopic studies and diverse applications.     

Rational synthesis of beta-substituted chlorin building blocks

Chlorins bearing synthetic handles at specific sites about the perimeter of the macrocycle constitute valuable building blocks. We previously developed methodology for preparing meso-substituted chlorin building blocks and now present methodology for preparing several complementary beta-substituted chlorin building blocks. The chlorins bear one or two beta substituents, one meso substituent, a geminal dimethyl group to lock in the chlorin hydrogenation level, and no flanking meso and beta substituents. The synthesis involves convergent joining of an Eastern half and a Western half. New routes have been developed to two beta-substituted bromo-dipyrromethane monocarbinols (Eastern halves). A new beta-substituted Western half was prepared following the method for preparing an unsubstituted Western half (3,3-dimethyl-2,3-dihydrodipyrrin). Chlorin formation is achieved by a two-flask process of acid-catalyzed condensation followed by metal-mediated oxidative cyclization. beta-Substituted chlorins have been prepared in 18-24% yield bearing a 4-iodophenyl group at the 8-position, a 4-iodophenyl group or a 4-[2-(trimethylsilyl)ethynyl]phenyl group at the 12-position, and a 4-iodophenyl group and a 4-[2-(trimethylsilyl)ethynyl]phenyl group at diametrically opposed beta-positions (2, 12). The latter building block makes possible the stepwise construction of linear multi-chlorin architectures. The chlorins exhibit typical absorption and fluorescence spectra. A systematic shift in the absorption maximum (637-655 nm for the free base chlorins, 606-628 nm for the zinc chlorins) and intensity of the chlorin Q(y)() band (epsilon up to 79 000 M(-)(1) cm(-)(1)) is observed depending on the location of the substituents. The characteristic spectral features and location of substituents in defined positions make these chlorins well suited for a variety of applications in biomimetic and materials chemistry.     

A new synthesis of chlorins

A new synthesis of chlorins has been developed, based upon the acid-catalyzed condensation of dialdehydes AB with dipyrromethanes CD.     

The rational synthesis of chlorins via rearrangement of porphodimethenes: influence of beta-substituents on the regioselectivity and stereoselectivity of pyrroline ring formation

The porphodimethene rearrangement methodology reported in this paper provides for a rational, step-by-step synthesis of chlorins from readily available pyrrole precursors. The intermediate porphodimethenes are furnished directly via the '2 + 2' MacDonald condensation, or by the less symmetry-constrained '3 + 1' condensation of a tripyrrane and bis-formyl pyrrole. The synthetic route is short and highly convergent, especially in the case of the '3 + 1' approach, and furnishes chlorins in good to moderate yields. The synthesis is highly regioselective and appears to be based on the ability of the beta-substituent to stabilize excess electron density, with an electron-neutral hydrogen or an electron-withdrawing carbonyl beta-substituent demonstrating the greatest influence on the formation of the pyrroline ring. The synthesis is highly stereoselective when epimerization of the pyrroline ring beta-carbons is possible, furnishing only the trans-reduced sterioisomer. Finally, there is substantial evidence that a fifth, axial ligand is involved in the transposition of peripheral hydrogens during the rearrangement of the pi-system from metalloporphodimethene to metallochlorin.     

Total syntheses of the Securinega alkaloids (+)-14,15-dihydronorsecurinine, (-)-norsecurinine, and phyllanthine

A new strategy for enantiospecific construction of the Securinega alkaloids has been developed and applied in total syntheses of (+)-14,15-dihydronorsecurinine (8), (-)-norsecurinine (6), and phyllanthine (2). The B-ring and C7 absolute stereochemistry of these biologically active alkaloids originated from trans-4-hydroxy-L-proline (10), which was converted to ketonitrile 13 via a high-yielding eight-step sequence. Treatment of this ketonitrile with SmI2 afforded the 6-azabicyclo[3.2.1]octane B/C-ring system 14, which is a key advanced intermediate for all three synthetic targets. Annulation of the A-ring of (-)-norsecurinine (6) with the required C2 configuration via an N-acyliminium ion alkylation was accomplished using radical-based amide oxidation methodology developed in these laboratories as a key step, providing tricycle 33. Annulation of the D-ring onto alpha-hydroxyketone 33 with the Bestmann ylide 45 at 12 kbar gave (+)-14,15-dihydronorsecurinine (8). In the securinine series, the D-ring was incorporated using an intramolecular Wadsworth-Horner-Emmons olefination of phenylselenylated alpha-hydroxyketone 47. The C14,15 unsaturation was installed late in the synthesis by an oxidative elimination of the selenoxide derived from tetracyclic butenolide 50 to give (-)-norsecurinine (6). The A-ring of phyllanthine (2) was formed from hydroxyketone 14 using a stereoselective Yb(OTf)3-promoted hetero Diels-Alder reaction of the derived imine 34 with Danishefsky's diene, affording adduct 35. Conjugate reduction and stereoselective equatorial ketone reduction of vinylogous amide 35 provided tricyclic intermediate 36, which could then be elaborated in a few steps to stable hydroxyenone 53 via alpha-selenophenylenone intermediate 52. The D-ring was then constructed, again using an intramolecular Wadsworth-Horner-Emmons olefination reaction to give phyllanthine (2).     

Isoquinoline derivatives VI. Synthesis and pharmacological properties of 4,6,7-substituted 1(2)-arylalkyl-1,2,3,4-tetrahydroisoquinolines and their analogs

The condensation of 6,7-dimethoxy-1,2.3.4-tetrahydroisoquinoline (II) with diphenylacetyl and diphenylpropionyl chlorides gave the corresponding amides (III). Reduction of III with lithium aluminum hydride converted them to tertiary amines IV, which were characterized as their hydrochlorides. The condensation of equimolecular amounts of amines I with the acid chlorides of substituted phenylacetic and diphenylpropionic acids gave amides V. The reduction of amides V with lithium aluminum hydride gave secondary amines VI. The corresponding tetrahydroisoquinolines (VII) were obtained by the cyclization of amides V and subsequent reduction with lithium aluminum hydride, The condensation of 1-diphenylethyl-6,7-dimethoxy-l,2,3,4-tetrahydroisoquinoline with formalin gave VIII. The IR spectra of the synthesized compounds were examined. The effect of these compounds on the arterial blood pressure and the coronary blood flow was studied.See [1] for communication V.Deceased.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1683–1687, December, 1971.     

Synthesis and Reactivity in [3+2] Cycloadditions of Isoxanthopterin N(5)‐Oxides – A New Synthesis of 6‐Substituted Pteridinediones

Intramolecular condensation of the N‐(4‐amino‐5‐nitrosopyrimidin‐4‐yl)‐2‐chloroacetamide 2 led to the pteridinone N(5)‐oxide 4 , while treatment of 2 with Me₃P yielded the 8‐(chloromethyl)purine 3 . A high‐yielding [3+2] dipolar cycloaddition of the N(5)‐oxide 4 to electron‐poor dipolarophiles, followed by spontaneous N,O‐bond cleavage, gave the C(6)‐substituted pteridinones 8a – 8d that were deprotected to provide the pteridine‐4,7(3H,8H)‐diones 9a – 9d , constituting a new synthesis of pterinones possessing a functionalised side chain at C(6).     

Synthesis and Characterization of Ferrocene—Containing Liquid Crystalline Materials with a Bromo—phenyl Moiety

Ten ferrocene-containing liquid crystalline materials,pFcC6H4CO2C6H4N-CHC6H4O2CC6H3BrOCnH2n 1(type I)and p-FcC6H4N=CHC6H4O2CC6H3BrOCnH2n 1(type II),were synthesized by condensation reactions of two ferrocenesubstituted amines,p-FcC6H4CO2C6H4NH2(4)and pFcC6H4NH2(5)(Fc:ferrocenyl)with five bromo-substituted benzaldehydes(3)(H2n 1CnOC6H3BrCOOC6H4CHO,n=2,4,6,8and 10).Their mesogenic behaviors were studied by hot-stage polarized optical microscopy and differential scanning calorimetry,The effects of structure(rigid core,terminal chain length)on the phase transition behaviors were discussed.     

Synthesis and Transformation of Methyl 2‐(6‐Hydroxy‐2‐phenylpyrimidin‐4‐yl)acetate: Simple Preparation of Pyrimidines with Heterocyclic Substituents

A simple and efficient synthesis of four new substituted pyrimidines, compounds 9a – d , from the title compound 3 is described. Conversion of 3 to methyl (E)‐3‐(dimethylamino)‐2‐(6‐methoxy‐2‐phenylpyrimidin‐4‐yl)prop‐2‐enoate ( 4 ), followed by condensation with various dinucleophiles according to the ‘enaminone methodology’, afforded the target compounds 9 in medium‐to‐good yields.     

Synthesis and Crystal Structure of a New Organic-inorganic Hybrid One-dimensional Polymer： [Zn（C8H23N5）]2（Pb3I10）

1 INTRODUCTION Recently, the organic-inorganic hybrid Ⅳa groupmetal halides with low-dimensional structure haveattracted much attention of chemists and physicistsdue to their particular properties and applications.For example, they are akin to “natural quantum-well”architectures and have tunable excitonic propertiesusually governed by the inorganic substructure andorganic component[1]; they have been applied assome technologically important materials, such assemiconductor materials in …     

一种基于罗丹明-硫脲类衍生物的新型活性染料的合成

首先以水合肼和异硫氰酸苯酯为原料,制得4-苯基-硫代氨基脲(M);再以罗丹明B和水合肼为原料,经闭环反应制备了罗丹明酰肼(1, RHa);然后在四氢呋喃溶剂中,化合物1在0~5 ℃条件下与三聚氯嗪经缩合取代反应,生成一缩产物罗丹明B酰肼-三聚氯嗪化合物(2, RHC);最后在氮气氛围下,化合物2进一步与M在45~50 ℃下回流,发生亲核取代反应生成文献尚未报道的新化合物--罗丹明B酰肼-三聚氯嗪-硫代氨基脲(3, RCP),其结构经¹H NMR、HRMS、IR和元素分析等表征确定。通过实验发现,RCP可在DMF-H₂O溶液[V(DMF)/V(H₂O)=1/1]中检测Hg²⁺,并且在5.0~9.0 μmol/L呈良好的线性关系。     

Efficient and Facile Catalyst‐free One‐Pot Synthesis and Characterization of Some Novel Bis(2‐benzothiazole) Derivatives

A general method for preparation of benzothiazole derivatives including oxidative cyclization of the corresponding Schiff bases was reported. Herein, we have been synthesized a series of new acyclic‐substituted bis(2‐arylbenzothiazoles). Synthesis of analogs substituted in the benzothiazole ring was achieved via the direct condensation reaction of o‐aminothiophenol with some of dialdehyde compounds under catalyst free in high yields. The structure of these products has been fully characterized by physical and spectroscopic data such as IR, ¹H‐NMR, ¹³C‐NMR, UV‐Vis, MS, and CHN analysis.     

Synthesis and Crystal Structure of a 3-D Hydrogen-bonded Supramolecular Decavanadate Compound [Habo]_6[V_(10)O_(28)]·2C_3H_7OH·2H_2O

1 INTRODUCTION The chemistry of polyoxometalates has been at- tracting much attention due to the richness in their structures, electron and proton storage abilities, ther- mal stability and applications in catalysis, medicine and surface sciences[1～3]. In recent years, the mixed- valence as well as full oxidized vanadium polyoxo- anions have been crystallized with a variety of orga- nic molecules as counteranions[4～8]. However, the guiding principles of the crystal structures of poly- o…     

Synthesis of 1,2,3‐Triazole Substituted Isoxazoles via Copper (I) Catalyzed Cycloaddition

The synthesis of a series of 3,5‐disubstituted isoxazole‐4‐carboxylic esters containing N‐substituted 1,2,3‐triazoles ( V ) starting from various benzaldehydes ( I ) is reported. Benzaldehydes undergo oximation with hydroxylamine hydrosulfate. Later, chlorination followed by condensation with methylacetoacetate and the hydrolysis of the resulting ester afforded respective carboxylic acid ( II ), which on chlorination with PCl₅ gave the corresponding acid chlorides ( III ). The coraboxylic acid chlorides ( III ) on propargylation gave propargylic esters ( IV ) and these on click reaction gave the title compounds ( V ).     

The electrochemistry of some ferrocene derivatives: redox potential and substituent effects

Fifteen ferrocene derivatives I–IX (four of which have been prepared for the first time: II, IIIf, V and VIII) have been prepared by Friedel–Crafts acetylation, Claisen condensation, Michael reaction, and ring closure by hydrazine hydrate. The anodic behaviour of these compounds has been studied by cyclic voltammetry at a platinum electrode in an aprotic solvent. All these substituted ferrocenes exhibit a reversible one‐electron oxidation reduction centred at each iron centre, and the effect of substituents on the half‐wave oxidation potential is discussed in terms of their electronic properties. Linear correlations have been observed between these potentials and the Hammett σ_x constant for the substituents. Cyclic voltammetry has been carried out for ferrocene derivatives IIIa, V and IX. Copyright © 2003 John Wiley & Sons, Ltd.