Spin‐Crossover Complex on Au(111): Structural and Electronic Differences Between Mono‐ and Multilayers

Submono‐, mono‐ and multilayers of the Fe(II) spin‐crossover (SCO) complex [Fe(bpz)₂(phen)] (bpz=dihydrobis(pyrazolyl)borate, phen=1,10‐phenanthroline) have beenprepared by vacuum deposition on Au(111) substrates and investigated with near edge X‐ray absorption fine structure (NEXAFS) spectroscopy and scanning tunneling microscopy (STM). As evidenced by NEXAFS, molecules of the second layer exhibit a thermal spin crossover transition, although with a more gradual characteristics than in the bulk. For mono‐ and submonolayers of [Fe(bpz)₂(phen)] deposited on Au(111) substrates at room temperature both NEXAFS and STM indicate a dissociation of [Fe(bpz)₂(phen)] on Au(111) into four‐coordinate complexes, [Fe(bpz)₂], and phen molecules. Keeping the gold substrate at elevated temperatures ordered monolayers of intact molecules of [Fe(bpz)₂(phen)] are formed which can be spin‐switched by electron‐induced excited spin‐state trapping (ELIESST).     

Time-dependent organization and wettability of decanethiol self-assembled monolayer on Au(111) investigated with STM

A detailed study on the time-dependent organization of a decanethiol self-assembled monolayer (SAM) at a designed solution concentration onto a Au(111) surface has been performed with scanning tunneling microscopy (STM). The SAMs were prepared by immersing Au(111) into an ethanol solution containing 1 microM decanethiol with different immersion times. STM images revealed the formation process and adlayer structure of the SAMs. It was found that the molecules self-organized into adlayers from random separation to a well-defined structure. From 10 s, small domains with ordered molecular organization appeared, although random molecules could be observed on Au(111) at the very initial stage. At 30 s, the SAM consisted of uniform short stripes. Each stripe consisted of sets of decanethiol mainly containing eight molecules. With the immersion time increasing, the length of the stripes increased. At 5 min, the alkyl chains overlapped each other between the adjacent stripes, indicating the start of a stacked process. After immersing Au(111) in decanethiol solution for 3 days, a densely packed adlayer with a (radical 3 x radical 3)R30 degrees structure was observed. The formation process and structure of decanethiol SAMs are well related to sample preparation conditions. The wettability of the decanethiolate SAM-modified Au(111) surface was also investigated.     

Through-bond versus through-space coupling in mixed-valence molecules: observation of electron localization at the single-molecule scale

Scanning tunneling microscopy (STM) is used to study two dinuclear organometallic molecules, meta-Fe2 and para-Fe2, which have identical molecular formulas but differ in the geometry in which the metal centers are linked through a central phenyl ring. Both molecules show symmetric electron density when imaged with STM under ultrahigh-vacuum conditions at 77 K. Chemical oxidation of these molecules results in mixed-valence species, and STM images of mixed-valence meta-Fe2 show pronounced asymmetry in electronic state density, despite the structural symmetry of the molecule. In contrast, images of mixed-valence para-Fe2 show that the electronic state density remains symmetric. Images are compared to constrained density functional (CDFT) calculations and are consistent with full localization of charge for meta-Fe2 on to a single metal center, as compared with charge delocalization over both metal centers for para-Fe2. The conclusion is that electronic coupling between the two metal centers occurs through the bonds of the organic linker, and through-space coupling is less important. In addition, the observation that mixed-valence para-Fe2 is delocalized shows that electron localization in meta-Fe2 is not determined by interactions with the Au(111) substrate or the position of neighboring solvent molecules or counterion species.     

Substrate‐Independent Magnetic Bistability in Monolayers of the Single‐Molecule Magnet Dy2ScN@C80 on Metals and Insulators

Magnetic hysteresis is demonstrated for monolayers of the single‐molecule magnet (SMM) Dy₂ScN@C₈₀ deposited on Au(111), Ag(100), and MgO|Ag(100) surfaces by vacuum sublimation. The topography and electronic structure of Dy₂ScN@C₈₀ adsorbed on Au(111) were studied by STM. X‐ray magnetic CD studies show that the Dy₂ScN@C₈₀ monolayers exhibit similarly broad magnetic hysteresis independent on the substrate used, but the orientation of the Dy₂ScN cluster depends strongly on the surface. DFT calculations show that the extent of the electronic interaction of the fullerene molecules with the surface is increasing dramatically from MgO to Au(111) and Ag(100). However, the charge redistribution at the fullerene‐surface interface is fully absorbed by the carbon cage, leaving the state of the endohedral cluster intact. This Faraday cage effect of the fullerene preserves the magnetic bistability of fullerene‐SMMs on conducting substrates and facilitates their application in molecular spintronics.     

Adlayers of C60-C60 and C60-C70 fullerene dimers formed on au(111) in benzene solutions studied by STM and LEED

Scanning tunneling microscopy (STM) and low-energy electron diffraction were used to reveal the structures of ordered adlayers of [2+2]-type C60-C60 fullerene dimer (C120) and C60-C70 cross-dimer (C130) formed on Au(111) by immersingit in abenzene solution containing C120 or C130 molecules. High-resolution STM images clearly showed the packing arrangements and the electronic structures of C120 and C130 on the Au(111) surface in ultrahigh vacuum. The (2 square root3 x 4square root3)R30 degrees, (2square root3 x 5square root3)R30 degrees, and (7 x 7) structures were found for the C120 adlayer on the Au(111) surface, whereas C130 molecules were closely packed on the surface. Each C60 or C70 monomer cage was discerned in the STM image of a C130 molecule.     

Assembly dynamics and detailed structure of 1-propanethiol monolayers on Au(111) surfaces observed real time by in situ STM

1-Propanethiol is chosen as a model alkanethiol to probe detailed mechanisms of the self-assembled monolayer (SAM) formation at aqueous/Au(111) interfaces. The assembly processes, including initial physi- and chemisorption, pit formation, and domain growth, were recorded into movies in real-time with high resolution by in situ scanning tunneling microscopy (STM) under potential control. Two major adsorption steps were disclosed in the propanethiol SAM formation. The first step involves weak interactions accompanied by the lift of the Au(111) surface reconstruction, which depends reversibly on the electrochemical potentials. The second step is chemisorption to form a dense monolayer, accompanied by formation of pits as well as structural changes in the terrace edges. Pits emerged at the stage of the reconstruction lift and increased to a maximum surface coverage of 4.0 +/- 0.4% at the completion of the SAM formation. Well-defined triangular pits in the SAM were found on the large terraces (more than 300 nm wide), whereas few and small pinholes appeared at the terrace edge areas. Smooth edges were converted into saw-like structural features during the SAM formation, primarily along the Au(111) atomic rows. These observations suggest that shrinking and rearrangement of gold atoms are responsible for both formation of the pits and the shape changes of the terrace edges. STM images disclose a (2 square root 3 x 3)R30 degrees periodic lattice within the ordered domains. Along with electrochemical measurements, each lattice unit is assigned to contain four propanethiol molecules exhibiting different electronic contrasts, which might originate in different surface orientations of the adsorbed molecules.     

Dihydroxy(4-thiomorpholinomethyl)benzoic acid: from molecular asymmetry to diode characteristics

One of the challenges in molecular electronics is to design molecules which can be used as functional units in electronic devices. The subject of our investigations is an asymmetrical molecule, dihydroxy(4-thiomorpholinomethyl)benzoic acid (TMBA), whose structural and electronic properties are characterized. The self-assembly behavior of TMBA on Au(111) surfaces resulting in highly ordered monolayers is obtained using scanning tunneling microscopy (STM). Furthermore, investigations on the electronic properties of the combined metal/molecule system reveal an orbital mediated tunneling process and tunneling decay constants for the carboxylic and thiomorpholino group. Thus, a diode-like character of TMBA is shown to be caused by intrinsic electronic properties of different molecular moieties.     

Molecules for organic electronics studied one by one

The electronic and geometrical structure of single difluoro-bora-1,3,5,7-tetraphenyl-aza-dipyrromethene (aza-BODIPY) molecules adsorbed on the Au(111) surface is investigated by low temperature scanning tunneling microscopy and spectroscopy in conjunction with ab initio density functional theory simulations of the density of states and of the interaction with the substrate. Our DFT calculations indicate that the aza-bodipy molecule forms a chemical bond with the Au(111) substrate, with distortion of the molecular geometry and significant charge transfer between the molecule and the substrate. Nevertheless, most likely due to the low corrugation of the Au(111) surface, diffusion of the molecule is observed for applied bias in excess of 1 V.     

The nature of alkanethiol self-assembled monolayer adsorption on sputtered gold substrates

A detailed study of the self-assembly and coverage by 1-nonanethiol of sputtered Au surfaces using molecular resolution atomic force microscopy (AFM) and scanning tunneling microscopy (STM) is presented. The monolayer self-assembles on a smooth Au surface composed predominantly of [111] oriented grains. The domains of the alkanethiol monolayer are observed with sizes typically of 5-25 nm, and multiple molecular domains can exist within one Au grain. STM imaging shows that the (4 x 2) superlattice structure is observed as a (3 x 2) structure when imaged under noncontact AFM conditions. The 1-nonanethiol molecules reside in the threefold hollow sites of the Au[111] lattice and aligned along its [112] lattice vectors. The self-assembled monolayer (SAM) contains many nonuniformities such as pinholes, domain boundaries, and monatomic depressions which are present in the Au surface prior to SAM adsorption. The detailed observations demonstrate limitations to the application of 1-nonanethiol as a resist in atomic nanolithography experiments to feature sizes of approximately 20 nm.     

Structural Transformation of Surface-Confined Porphyrin Networks by Addition of Co Atoms

The self-assembly of a nickel-porphyrin derivative (Ni-DPPyP) containing two pyridyl coordinating sites and two pentyl chains at trans meso positions was studied with scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and low energy electron diffraction (LEED) on Au(111). Deposition of Ni-DPPyP onto Au(111) gave rise to a close-packed network for coverages smaller or equal to one monolayer as revealed by STM and LEED. The molecular arrangement of this two-dimensional network is stabilized via hydrogen bonds formed between the pyridyl's nitrogen and hydrogen atoms from the pyrrole groups of neighboring molecules. Subsequent deposition of cobalt atoms onto the close-packed network and post-deposition annealing at 423 K led to the formation of a Co-coordinated hexagonal porous network. As confirmed by XPS measurements, the porous network is stabilized by metal-ligand interactions between one cobalt atom and three pyridyl ligands, each pyridyl ligand coming from a different Ni-DPPyP molecule.     

Importance of the Anchor Group Position (Para versus Meta) in Tetraphenylmethane Tripods: Synthesis and Self‐Assembly Features

The efficient synthesis of tripodal platforms based on tetraphenylmethane with three acetyl‐protected thiol groups in either meta or para positions relative to the central sp³ carbon for deposition on Au (111) surfaces is reported. These platforms are intended to provide a vertical arrangement of the substituent in position 4 of the perpendicular phenyl ring and an electronic coupling to the gold substrate. The self‐assembly features of both derivatives are analyzed on Au (111) surfaces by low‐temperature ultra‐high‐vacuum STM, high‐resolution X‐ray photoelectron spectroscopy, near‐edge X‐ray absorption fine structure spectroscopy, and reductive voltammetric desorption studies. These experiments indicated that the meta derivative forms a well‐ordered monolayer, with most of the anchoring groups bound to the surface, whereas the para derivative forms a multilayer film with physically adsorbed adlayers on the chemisorbed para monolayer. Single‐molecule conductance values for both tripodal platforms are obtained through an STM break junction experiment.     

Rastertunnelmikroskopie an chiralen Molekülen: Nanochemie

The imaging and manipulation capabilities of the scanning tunnelling microscope (STM) render possible a novel nanoscale chemistry based on experiments with single molecules. Herein, we address several aspects of a nanoscale stereochemistry using the STM. As an example, we investigate 1‐nitronaphthalene on Au(111). 1‐Nitronaphthalene becomes chiral upon planar adsorption on the metal surface. High‐resolution STM images reflect the asymmetric electronic structure of the molecules and allow for the determination of the absolute configuration of any individual molecule within complex molecular structures. At medium coverage, spontaneous breaking of the chiral symmetry results in the formation of homochiral conglomerates, while at high coverage racemic structures prevail. Finally, the tip of the STM is used to separate “supramolecule‐by‐supramolecule” a racemic mixture of chiral 1‐nitronaphthalene aggregates into the enantiopure compounds.     

Adsorption and thermal decomposition of 2-octylthieno[3,4-b]thiophene on Au(111)

The adsorption and thermal stability of 2-octylthieno[3,4-b]thiophene (OTTP) on the Au(111) surfaces have been studied using scanning tunneling microscopy (STM), temperature programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). UHV-STM studies revealed that the vapor-deposited OTTP on Au(111) generated disordered adlayers with monolayer thickness even at saturation coverage. XPS and TPD studies indicated that OTTP molecules on Au(111) are stable up to 450K and further heating of the sample resulted in thermal decomposition to produce H(2) and H(2)S via C-S bond scission in the thieno-thiophene rings. Dehydrogenation continues to occur above 600K and the molecules were ultimately transformed to carbon clusters at 900K. Highly resolved air-STM images showed that OTTP adlayers on Au(111) prepared from solution are composed of a well-ordered and low-coverage phase where the molecules lie flat on the surface, which can be assigned as a (9×2√33)R5° structure. Finally, based on analysis of STM, TPD, and XPS results, we propose a thermal decomposition mechanism of OTTP on Au(111) as a function of annealing temperature.     

High-resolution scanning tunneling microscopy images of molecular overlayers prepared by a new molecular beam deposition apparatus with spray-jet technique

We developed a new molecular beam deposition apparatus using a spray-jet technique for high-quality thin film preparation of nonsublimable molecules. The apparatus was used to deposit chloro[tri-tert-butyl-subphthalocyaninato]boron(III) (TBSubPc) molecules on an Au(111) surface for analysis by low-temperature scanning tunneling microscopy (STM). Highly resolved images, in which tert-butyl groups in a TBSubPc molecule were clearly identifiable, were obtained. The image quality and the resolution of these images compared favorably well to STM images taken on reference samples which were sublimed onto Au (111) from a heated crucible.     

Light-induced structural transformation in self-assembled monolayer of 4-(amyloxy)cinnamic acid investigated with scanning tunneling microscopy

UV light irradiation effect on the structural transformation in a self-assembled monolayer of 4-(amyloxy)cinnamic acid (AOCA) on Au(111) has been investigated by using electrochemical scanning tunneling microscopy (ECSTM), cyclic voltammetry, and infrared (IR) spectroscopy. A well-defined 4-(amyloxy)cinnamic acid adlayer with a (4 x 11) symmetry was first prepared on Au(111). After UV-light irradiation onto the adlayer, a new adlayer is observed with different molecular arrangement and a symmetry of (5 x 8). On the basis of the results from high-resolution STM image and photochemical reaction, a dimerizaion of AOCA molecules in the adlayer with structural transformation is concluded. Schematic models have been proposed for the unirradiated and irradiated adlayers, respectively. The direct evidence at molecular level about photodimerization of cinnamic acid on metal substrate is presented.     

Hierarchical chiral framework based on a rigid adamantane tripod on Au(111)

We have investigated the tripod-shaped bromo adamantane trithiol (BATT) molecule on Au(111) using scanning tunneling microscopy (STM) at 4.7 K. Adsorption of BATT leads to formation of highly ordered self-assembled monolayers (SAMs) with three-point contacts on Au(111). The structure of these SAMs has been found to have a two-tiered hierarchical chiral organization. The self-assembly of achiral monomers produces chiral trimers, which then act as the building blocks for chiral hexagonal supermolecules. SAMs begin to form from the racemic mixture of assembled molecules in ribbon-shaped islands, followed by the transformation to enantiomeric domains when SAM layers develop two-dimensionally across hcp domains. Such a chiral phase transition at the two-dimensional domain can arise from a subtle balance between molecule-substrate and intermolecular interactions. Two structural factors, the S atom (stabilization) and the methylene groups (chirality) located just above the S atom, induce the chiral ordering of BATT on Au(111).     

Control of alkanethiolate monolayer structure using vapor-phase annealing

We describe an annealing procedure for self-assembled monolayers (SAMs) that uses vapor-phase molecules to modify the local domain structure. Existing SAMs of decanethiolate on Au{111} were annealed using vapor-phase dodecanethiol molecules, so that the original and newly introduced molecules could be distinguished using scanning tunneling microscopy (STM). Molecules deposited from the vapor phase inserted at existing monolayer defect sites and domain boundaries, and at substrate step edges forming discrete network-like domains. The SAM molecular lattice can be preserved across molecular terrace boundaries between the decanethiolate and dodecanethiolate domains. Candidate molecular electronic component molecules were inserted from solution in the decanethiolate matrix as isolated molecules. These inserted molecules could then be surrounded by dodecanethiolate molecules introduced from the vapor phase, thus demonstrating a method for controlling the local environment of inserted molecules.     

Epitaxial supramolecular assembly of fullerenes formed by using a coronene template on a Au(111) surface in solution

Characteristic properties of the coronene layer formed on Au(111) for the epitaxial growth of various fullerenes are described. The electrochemical behavior of the coronene adlayer prepared by immersing a Au(111) substrate into a benzene solution containing coronene was investigated in 0.1 M HClO4. The as-prepared coronene adlayer on Au(111) revealed a well-defined (4 x 4) structure. Structural changes of the array of coronene molecules induced by potential manipulation were clearly observed by in situ scanning tunneling microscopy (STM). Supramolecularly assembled layers of fullerenes such as C60, C70, C60-C60 dumbbell dimer (C120), C60-C70 cross-dimer (C130), and C60 triangle trimer (C180) were formed on the well-defined coronene adlayer on the Au(111) surface by immersing the coronene-adsorbed Au(111) substrate into benzene solutions containing those molecules. The adlayers thus prepared were characterized by comparison with those which were directly attached to the Au(111) surface. The C60 molecules formed a honeycomb array with an internal structure in each C60 cage on the coronene adlayer, whereas C70 molecules were one-dimensionally arranged with the same orientations. The dimers, C120 and C130 molecules, formed an identical structure with c(11 x 4 radical3)rect symmetry. For the C130 cross-dimer molecule, C60 and C70 cages were clearly recognized at the molecular level. It was difficult to identify the adlayer of the C180 molecule directly attached to Au(111); however, individual C180 molecules could be recognized on the coronene-modified Au(111) surface. Thus, the adlayer structures of those fullerenes were strongly influenced by the underlying coronene adlayer, suggesting that the insertion of a coronene adlayer plays an important role in the formation of supramolecular assemblies of fullerenes.     

STM investigation of the photoisomerization of an azobis-(benzo-15-crown-5) molecule and its self-assembly on Au(111)

Scanning tunneling microscopy (STM) has been employed to investigate the photoisomerization of azobis-(benzo-15-crown-5) on Au(111). A self-assembled monolayer of azobis-(benzo-15-crown-5) with a (3 x 7) symmetry was observed on Au(111). After ex-situ UV-light irradiation, a new adlayer structure with a different molecular arrangement could be seen on Au(111), although the domain size of the ordered packing is small. On the basis of a high-resolution STM image and photochemical reaction result, schematic models have been proposed for the original and ex-situ irradiated adlayers. After in-situ UV-light irradiation, the ordered arrays disappeared and many bright clusters emerged at domain boundaries. The results presented here provide direct evidence at the molecular level for a photochemical reaction.     

Substrate-Independent Magnetic Bistability in Monolayers of the Single-Molecule Magnet Dy2ScN@C80 on Metals and Insulators

Magnetic hysteresis is demonstrated for monolayers of the single-molecule magnet (SMM) Dy₂ScN@C₈₀ deposited on Au(111), Ag(100), and MgO|Ag(100) surfaces by vacuum sublimation. The topography and electronic structure of Dy₂ScN@C₈₀ adsorbed on Au(111) were studied by STM. X-ray magnetic CD studies show that the Dy₂ScN@C₈₀ monolayers exhibit similarly broad magnetic hysteresis independent on the substrate used, but the orientation of the Dy₂ScN cluster depends strongly on the surface. DFT calculations show that the extent of the electronic interaction of the fullerene molecules with the surface is increasing dramatically from MgO to Au(111) and Ag(100). However, the charge redistribution at the fullerene-surface interface is fully absorbed by the carbon cage, leaving the state of the endohedral cluster intact. This Faraday cage effect of the fullerene preserves the magnetic bistability of fullerene-SMMs on conducting substrates and facilitates their application in molecular spintronics.