Speciation of butyltin compounds in environmental and biological samples using headspace single drop microextraction coupled with gas chromatography-inductively coupled plasma mass spectrometry

A method based on headspace single drop microextraction (HS-SDME) in combination with gas chromatography-inductively coupled plasma mass spectrometry (GC-ICP-MS) was proposed for the speciation analysis of butyltin compounds in environmental and biological samples. The sodium tetraethylborate (NaBEt4) and sodium tetrahydroborate (NaBH4) were used as the derivatizing reagent for in situ derivatization of the butyltins. For the two derivatizations, the HS-SDME parameters such as organic solvent, drop volume, sample pH, stirring rate, temperature, extraction time and the ionic strength were examined systematically. The analytical performance including the linearity ranges, limits of detection (LODs) and reproducibilities of the two derivatizations were compared under the respective optimized conditions. Derivatization with NaBEt(4) proved to be more sensitive and robust than that with NaBH4, leading to the LODs of 1.4 ng/L for MBT, 1.8 ng/L for DBT and 0.8 ng/L for TBT. The reproducibilities, expressed as relative standard deviations (RSDs), were in the range of 1.1-5.3% (c=1 microg/L, n=3). With tripropyltin (TPrT) as internal standard, HS-SDME-GC-ICP-MS with NaBEt(4) derivatization was applied for the speciation analysis of butyltins in real seawater and shellfish samples. The butyltins found in the real-world samples are 31ng/L MBT, 79 ng/L DBT and 32 ng/L TBT for seawater, and 11.6-30.4 ng/g MBT, 11.8-8.9 ng/g DBT and 12.8-52.6 ng/g TBT for different shellfish samples. For validation, the developed method was also employed for the speciation analysis of butyltins in certified reference material (CRM) of PACS-2 sediment, and the determined values are in a good agreement with the certified values. The developed method is simple, rapid, sensitive, and cost-effective and provides an attractive alternative for butyltins speciation in biological and environmental samples with complex matrix.     

Coupled two-step microextraction devices with derivatizations to identify hydroxycarbonyls in rain samples by gas chromatography-mass spectrometry

Coupling a two-step liquid-phase microextraction (LPME) with O-(2,3,4,5,6-pentafluorobenzyl)-hydroxylamine/bis(trimethylsilyl)trifluoroacetamide (PFBHA)/(BSTFA) derivatization was developed to detect hydroxycarbonyls in rainwater samples using gas chromatography-mass spectrometry (GC-MS). LPME provides a fast and inexpensive pre-concentration, and miniaturized extraction to analyze the target compounds rainwater samples. Derivatization techniques offer a clear method to identify target compounds. The hydroxycarbonyls were determined using two-step derivatizations. Dynamic-LPME was applied in the first derivatization, and head-space single drop derivatization was employed in the second reaction. The LODs varied from 0.023 to 4.75 microg/l. The calibration curves were linear for at least two orders of magnitude with R2>or=0.994. The precision was within 6.5-12%, and the relative recoveries in rainwater were more than 89% (the amount added ranged from 0.3 to 15 microg/l). A field sample was found to contain 2.54 microg/l of hydroxyacetone and 0.110 microg/l of 3-hydroxy-2-butanone. Hydroxyacetone was also detected in one of the tested samples at a concentration of 2.39 microg/l.     

Derivatization of tributyltin with sodium tetrakis(4-fluorophenyl)-borate for sensitivity improvement of tandem mass spectrometry.

Derivatization of tributyltin for tandem mass spectrometry is described. Tributyltin (TBT) and triphenyltin (TPT) were derivatized with sodium tetrakis(4-fluorophenyl)borate. After optimization of their MS/MS conditions, derivatization conditions were examined. Under the optimum conditions using in-situ derivatization, the calibration curves for the TBT and TPT were linear in the ranges of 0.4 - 200 and 1.2 - 200 pg of Sn, respectively. The detection limits for TBT and TPT were 0.07 and 0.43 pg of Sn, respectively. In the case of TBT, the detection limit with 4-fluorophenylation was improved about five times compared with that with pentylation (0.35 pg). This improvement is ascribed to the bond-dissociation energy of Sn-aryl being stronger than that of Sn-alkyl. Namely, the selective fragmentation of 4-fluorophenyl TBT resulted in high sensitivity. The relative recoveries of TBT and TPT from seawater were 99 and 109%, respectively. The method was successfully applied to the seawater samples.     

Tributyltin speciation in aquatic matrices by CGC-FPD and CGC-MS confirmation

An analytical procedure for the determination of tributyltin (TBT) in seawater, sediments and biota is described. Extraction of TBT as chloride is achieved by hydrochloric acid treatment followed by a liquid extraction using a modified solvent with a metal coordinating ligand, and a Grignard derivatization (CH₃MgCl). The organotin fraction was isolated from the derivatized extract by column chromatography. The final determination was accomplished by on-column capillary gas chromatography (CGC) coupled to a flame photometric detector (FPD) and mass spectrometry (MS) confirmation. The relative detection limits of the analytical procedure were dependent of the environmental compartment, 0.5 ng 1^–1 (as TBT) for seawater, and 0.1 ng g^–1 and 0.4 ng g^–1 for sediments and biota, respectively. The TBT recovery of fortified samples was in the range of 90% for water and biota, and of 60% in case of sediments. The reproducibility (RSD) of the whole procedure for three independent replicates was around 15%.     

Contamination and biomethylation of organotin compounds in pearl/fish culture areas in Japan.

Uwakai of Japan is famous for pearl and yellowtail fish culture. Recently, pearl culture farming in that region has suffered from a low production of pearls. An illegal use of organotin antifouling paints on fishing nets was reported. In the line of pollution studies, thus, the present investigation was carried out to examine the contamination status and fate of organotin compounds. Totally, 23 water, 10 sediment and 8 pearl oyster tissue samples were analyzed for tributyltin (TBT), triphenyltin (TPT), and their breakdown products (di- and mono compounds) by gas chromatography combined with inductively coupled plasma mass spectrometry (GC/ICP-MS). The results show that the TBT concentrations in water, sediment and biota were in the range from 0.11 to 10.6 ng Sn l(-1), 0.35 to 2500 ng Sn g(-1), and 50.4 to 181 ng Sn g(-1), respectively. The values for sediment and biota are expressed on the dry-weight basis. Triphenyltin in water, sediment and biota were in the range from 0.009 to 0.108 ng l(-1), non-detect to 12.7 ng g(-1), and non-detect to 6.83 ng g(-1), respectively. Although the TBT concentration in seawater is below the tentative assessment level of 10 ng l(-1) set by the Japanese Environment Agency in 1992, it may cause endocrine disruption/other effects in aquatic organisms. Octyltin compounds (mono-, di- and trioctyltin) were also quantified in seawater and sediment. The detection of dibutyldimethyltin (DBDMT) and tributylmonomethyltin (TBMMT) in sediment (methylated butyltins comprised 2.8-31% of total butyltins), and TBMMT in seawater suggested that biomethylation of anthropogenic tributyltins is a significant transformation pathway in the coastal environment.     

Liquid-phase microextraction-gas chromatography-mass spectrometry for the determination of bromate, iodate, bromide and iodide in high-chloride matrix

In the determination of bromate and iodate, any free bromide and iodide present was quantitatively removed by anion exchange with silver chloride exploiting the differences in silver salts solubility product, being AgCl, 1.8 x 10(-10), AgBr, 5.0 x 10(-13), AgI, 8.3 x 10(-17), AgBrO(3), 5.5 x 10(-5) and AgIO(3), 3.1 x 10(-8). The oxyhalides were reduced with ascorbic acid to halides and converted to 4-bromo-2,6-dimethylaniline and 4-iodo-2,6-dimethylaniline by their reaction with 2-iodosobenzoate in the presence of 2,6-dimethylaniline at pH 6.4 and 2-3, respectively. Single drop microextraction (SDME) of the haloanilines in 2 microl of toluene and injection of the whole extract into GC-MS, or liquid-phase microextraction (LPME) into 50 microl of toluene and injection of 2 microl of extract, resulted in a sensitive method for bromate and iodate. The latter method of extraction has been found more robust, sensitive and to give better extraction in shorter period than SDME. Total bromine/iodine was determined without any treatment with silver chloride. High concentration of chloride in the matrix did not interfere. A rectilinear calibration graph was obtained for 0.05 microg-25 mg l(-1) of bromate/bromide and iodate/iodide, the limit of detection were 20 ng l(-1) of bromate, 15 ng l(-1) of iodate, 20 ng l(-1) of bromide and 10 ng l(-1) of iodide (by LPME in 50 microl of toluene). The method has been applied to seawater and table salt. From the pooled data, the average recovery of spiked oxyhalide/halide to real samples was in range 96.7-105.7% with RSD in range 1.6-6.5%.     

Optimization of butyltin measurements for seawater,tissue, and marine sediment samples

Optimized techniques for measuring butyltins at the sub-part-per-trillion (ppb; 1:10¹²) level in seawater and at the part-per-billion (ppb; 1:10⁹) level in tissues and sediments are presented. Purge and trap/hydride derivatization followed by atomic absorption (AA) detection was optimized to give better sensitivity than was previously attained for seawater, yielding environmental detection limits of 0.08–0.2 ng dm^?3. Improvement in precision and reproducibility in measurement of butyltins in tissues and sediments was attained by adjustment of the concentration in an organic extract to minimize matrix effects and by use of internal standards. The tissues and sediments were homogenized and extracted with methylene chloride (CH₂Cl₂) after acidification. The butyltins in the organic layer were derivatized with hexylmagnesium bromide and analyzed by gas chromatography (GC) with a flame photometric detector (FPD). The absolute detection limits in tissues and sedimets were 0.1 ng for tributyltin (TBT), 0.12 ng for dibutyltin (DBT) and 0.29 ng for monobutyltin (MBT).     

Liquid-phase microextraction for sample preparation in analysis of unconjugated anabolic steroids in urine

The applicability of in-vial two-phase liquid-phase microextraction (LPME) in porous hollow polypropylene fiber was studied for the sample preparation of unconjugated anabolic steroids in urine. Four different anabolic steroids - metabolites of fluoxymesterone, 4-chlorodehydromethyltestosterone, stanozolol and danazol - were used as test compounds and methyltestosterone as an internal standard. A standard two-phase LPME method for use with liquid chromatography/mass spectrometry (LC/MS) was set up and the influence of different parameters, including the nature of organic solvent, extraction time, salting-out and temperature, on the LPME process was investigated. Taking advantage of the preliminary studies, a novel two-phase LPME method utilizing simultaneous in-fiber silylation was developed and validated for gas chromatographic/mass spectrometric (GC/MS) analysis of a danazol metabolite in urine. In all, LPME allowed a very straightforward, simple and selective way to prepare urine samples for steroid analysis, being most suitable for hydrophobic steroids. The LPME method with in-fiber derivatization for GC/MS analysis exhibited high sensitivity, repeatability and linearity and enabled simultaneous filtration, extraction, enrichment and derivatization of the analyte from urine matrix without any other steps in sample pretreatment.     

Determination of phenols in environmental water samples by two-step liquid-phase microextraction coupled with high performance liquid chromatography

In this work, a two-step liquid-phase microextraction (LPME) method was presented for the extraction of phenols in environmental water samples. Firstly, the polar phenol in water samples (donor phase) was transferred to 1-octanol (extraction mesophase) by magnetic stirring-assisted LPME. Subsequently, target analytes in the 1-octanol was back extracted into 0.1 mol/L sodium hydroxide solution (acceptor phase) by vortex-assisted LPME. By combination of the two-step LPME, the enrichment factors were multiplied. The main features of this two-step LPME for phenols lie in the following aspects. Firstly, the extraction can be accomplished within relatively short time (ca. 20 min). Secondly, it was compatible with HPLC analysis, avoiding derivatization step that is generally necessary for GC analysis. Thirdly, high enrichment factors (296-954 fold) could be obtained for these analytes. Under the optimized conditions, the linearities were 10-1000, 1-500, 1-500, 5-500 and 1-500 ng/mL for different phenols with all regression coefficients higher than 0.9985. The limits of detection were in the range from 0.3 to 3.0 ng/mL for these analytes. Intra-and inter-day relative standard deviations were below 7.6%, indicating a good precision of the proposed method.     

Analysis of organotin compounds by grignard derivatization and gas chromatography-ion trap tandem mass spectrometry

The determination of organotin compounds in water using gas chromatography-tandem mass spectrometry (GC-MS-MS) is described. Several organotin derivatives were synthesized by the reaction of organotin chlorides with Grignard reagents such as methyl-, propyl- and pentylmagnesium halides. After the optimization of the GC-MS-MS conditions, several derivatizations with the Grignard reagents were compared by evaluating the molar responses and volatilities of the derivatives and derivatization yields. As a result, the derivatizing reagent of choice is pentylmagnesium bromide. Calibration curves for the mono-, di- and tributyltins and mono-, di- and triphenyltins with pentylmagnesium bromide were linear in the range of 0.5-100 pg of Sn. The instrumental detection limits of six organotins ranged from 0.20 to 0.35 pg of Sn. The recovery tests from water samples (500 ml) were performed by using sodium diethyldithiocarbamate (DDTC) as a complexing reagent. Except for monophenyltin, the absolute recoveries of organotins from pure water at 200 ng of Sn/l were satisfactory. The recoveries calibrated by surrogate compounds (perdeuterated organotin chlorides) ranged from 71 to 109%. The method detection limits ranged from 0.26 to 0.84 pg of Sn (500-ml sample). This method was applied to the recovery of organotins from river water and seawater. The calibrated recoveries were between 90 and 122%.     

Determination of 4-alkylphenols by novel derivatization and gas chromatography-mass spectrometry

A simple and sensitive method for the determination of alkylphenols in water samples has been developed using gas chromatography-mass spectrometry. Alkylphenols were determined after the extractive derivatization with pentafluoropyridine. The derivatization of alkylphenols efficiently proceeded to give the corresponding 4-tetrafluoropyridyl derivatives under the biphasic reaction system. The derivatization conditions including the phase-transfer catalyst, the amount of pentafluoropyridine, the reaction time, the concentration of NaOH and organic solvent were optimized. On the mass spectra of these derivatives, intense specific ion peaks were observed: m/z 256 for 4-n-alkylphenols and m/z 284 for 4-tert.-alkylphenols. Calibration curves were linear in the range of 20-1000 ng/l (200-10,000 ng/l for nonylphenol), and the detection limits varied between 6.93 and 15.7 ng/l (85.2 ng/l for nonylphenol). The average recoveries of the alkylphenols in a fortified river water sample (100 ng/l except for nonylphenol: 1000 ng/l) ranged from 91.1 to 112%. The relative standard deviations were found to be between 5.6 and 16%. This method was successfully applied to the determination of alkylphenols in river water.     

Comparison of GC/MSD and GC/AED for the determination of organotin compounds in the environment

Summary Methods are described for the analysis of environmental samples like water, sediment and suspended matter for the determination of all organotin compounds (OTs) that are currently used as biocides: tributyltin (TBT), triphenyltin (TPT), tricyclohexyltin (TCT) and fenbutatin oxide (FBTO). In water also five degradation products (di and mono substituted analogs) can be determined. Alkylation using a Grignard reagent was used to obtain OT derivatives amenable to gas chromatography (GC). Both methylation and pentylation have been employed for derivatization prior to GC analysis. The present results show that derivatization efficiencies for TPT, TCT and FBTO at trace levels are higher using methylation than pentylation. Detection limits for each type of sample matrix were determined using GC/Mass Selective Detection (GC/MSD) and GC/Atomic Emission Detection (AED). In sediment and suspended matter only tri-substituted OTs (i.e. the parent compounds) could be determined. Detection limits ranged from 0.2 to 10 ng/g dry weight. FBTO, not previously detected in environmental samples, was found at levels of 4 and 11 ng/g in a suspended matter sample and a sediment sample, respectively. In water the OTs and their degradation products were determined at levels of 1–10 ng/l (as tin) using 200 ml water samples.     

Distribution and fate of tributyltin in the united states marine environment

Tributyltin (TBT) has been measured in water in 12 of 15 harbors studied during US Navy baseline surveys. The highest concentrations of TBT (some exceeding laboratory toxicity limits) have been found in yacht harbors and near vessel repair facilities. Many sites (75%) in harbors and estuaries had no detectable (<5 ng dm^?3) TBT. TBT monitoring studies with increased detection limits (<1 ng dm^?3) have documented a high degree of TBT variability associated with tide, season and intermittent point source discharges. Although yacht harbors were shown to be the principal TBT source in most regions, dry-docks can be significant sources. Tributyltin degradation studies were conducted using unfiltered seawater from four geographic regions and incubated under natural conditions. Degradation half-lives were always in the range of 4–19 days, providing evidence that TBT is not highly persistent in the water column at environmental concentrations. Preliminary degradation experiments suggest that TBT has a longer residence time in sediment with a half-life of several months. Tributyltin is primarily in the dissolved form in unfiltered seawater, although the association with particulate fractions may increase in samples collected near yacht repair facilities, Partition coefficients for particulate TBT versus bulk water are frequently near 3000 and vary with the particulate concentration, salinity and presence of natural organics.     

Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography - mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30-1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography – mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography – mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30–1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

Isotope dilution GC-MS routine method for the determination of butyltin compounds in water

A standard GC-MS instrument with electron impact ionisation has been used to develop a fast, simple and reliable method for the simultaneous determination of monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) in water samples. Isotope dilution analysis (IDA) is used for the determination of species, taking advantage of a commercially available spike solution containing a mixture of MBT, DBT and TBT enriched in ¹¹⁹Sn. Method detection limits for 100-mL samples were between 0.18 and 0.25 ng L⁻¹ for the three butyltin compounds with typical RSD between 2 and 4% at levels between 100 and 10 ng L⁻¹, respectively. Recovery of tin species in spiked samples (natural water, wastewater and seawater) was quantitative. The stability of butyltin compounds in collected seawater samples was also studied. The addition of a 1% (v/v) glacial acetic acid preserved tin species in the samples for at least 5 days at room temperature. The IDA method was finally implemented in a routine testing laboratory and it was subsequently accredited by the Spanish National Accreditation Body according to the requirements of UNE-EN ISO/IEC 17025.     

Determination of tributyltin (TBT) in marine sediment using pressurised liquid extraction–gas chromatography–isotope dilution mass spectrometry (PLE–GC–IDMS) with a hexane–tropolone mixture

Extraction conditions for the determination of tributyltin (TBT) in sediment samples have been developed further. The analytical procedure is based on spiking with isotopically labelled analyte, pressurised liquid extraction (PLE) with a hexane/tropolone mixture, Grignard derivatization and quantification by GC–MS. It was applied to two unknown sediment samples as part of an intercomparison exercise of the Comité Consultatif pour la Quantité de Matière (CCQM). The detection limit was approximately 1.5 ng/g TBT as Sn, while the repeatability and intermediate precision (as the coefficient of variation) were 1.9% and 3.2%, respectively. The expanded uncertainty was 6.2% (coverage factor k = 2), and the accuracy was confirmed by measurement of a certified reference material.     

Multivariate optimization approach for the analysis of butyltin compounds in mussel tissues by gas chromatography-mass spectrometry

The derivatization with NaBEt(4) for the determination of butyltin compounds in mussel tissues (Mytilus galloprovincialis) by GC-MS was optimized using a central composite design. The effects of NaBEt(4) concentration, pH and acetate buffer concentration on the derivatization efficiency were considered. Solid-phase extraction with Florisil cartridges was performed, demonstrating that the clean-up drastically reduces the background and improves the sensitivity. The good accuracy of the method was verified on a certified reference material (ERM 477); the figures of merit for all the three analytes, evaluated under optimum conditions, were satisfactory. The optimized derivatization procedure was applied to the determination of the analytes in mussels exposed to tributyltin (TBT). All considered tissues showed considerable accumulation of TBT, especially gills.     

Optimisation of solvent desorption conditions for chemical warfare agent and simulant compounds from Porapak Q using experimental design. Part 2: Extraction of sulphur mustard from steel and glass Porapak tubes

The ion-pair solid-phase extraction (SPE) of 4-alkylphenols followed by derivatization with pentafluoropyridine is demonstrated. Under alkaline conditions, the 4-alkylphenols could be efficiently adsorbed on a C18 SPE cartridge conditioned with an ion-pair reagent, tetra-n-hexylammonium bromide. The ion pairs, ammonium phenolates, formed on the C18 solid phase, were eluted with a solvent containing the derivatizing reagent, pentafluoropyridine, and completely derivatized during the elution. After optimization of the adsorption and derivatization, we established a method for the determination of the 4-alkylphenols in water samples. The method showed good linearity between 20 and 1000 ng (200-10,000 ng for nonylphenol). By processing 20-ml samples, the method detection limits (MDL) were in the range of 5.2-8.9 ng/l for the 4-alkylphenols (76 ng/l for nonylphenol). To evaluate its applicability to a real aqueous matrix, several river water samples were analyzed.     

The distribution and potential toxic effects of TBT in UK estuaries during 1986

The concentrations of butyltin compounds in seawater were measured at nine sites in the UK during 1986. In popular yachting centres concentrations of tributyltin (TBT) ranged from less than detectable ( < 1 ng dm^?3) in the winter, up to 1500 ng dm^?3 in marinas in the summer. Measurements of wastewater generated by high-pressure hosing of yachts demonstrated that even higher environmental concentrations of TBT resulted from the procedure. The results of the monitoring programme are discssed in relation to the toxicity of TBT and recent government legislative actions.