Fluoroalcohols as novel buffer components for basic buffer solutions for liquid chromatography electrospray ionization mass spectrometry: retention mechanisms

Two fluoroalcohols--1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) and 1,1,1,3,3,3-hexafluoro-2-methyl-2-propanol (HFTB)--were evaluated as volatile buffer acids in basic mobile phases for LC-ESI-MS determination of acidic and basic compounds. HFIP and HFTB as acidic buffer components offer interesting possibilities to adjust retention behavior of different analytes and expand the currently rather limited range of ESI-compatible buffer systems for basic mobile phases. Comparing with commonly used basic buffer components the fluoroalcohols did not suppress the ionization of the analytes, for several analytes ionization enhancement was observed. RP chromatographic retention mechanisms were evaluated and compared to traditional buffer system. All trends in retention of the acidic and basic analytes can be interpreted by the following model: the neutral fluoroalcohols are quite strongly retained by the stationary phase whereas their anions are less retained, thus their amount on the stationary phase is dependent on mobile phase pH; the anions of the fluoroalcohols form ion pairs in the mobile phase with the basic analytes; the fluoroalcohols on the stationary phase surface compete with acidic analytes thereby hindering their retention; the fluoroalcohols on the stationary phase bind basic analytes thereby favoring their retention.     

Rapid characterization of oligonucleotides by capillary liquid chromatography-nano electrospray quadrupole time-of-flight mass spectrometry

A fast quality control method is developed allowing the desalting and characterization of oligonucleotides by capillary liquid chromatography and on-line nano-electrospray ionization quadrupole time-of-flight mass spectrometry using column switching. The influence of addition of ammonium acetate, trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid, formic acid or acetic acid to the sample, addition of ammonium acetate to the trapping solvent and variation of the trapping time on the further reduction of cation adduction was studied. Final conditions were the addition of 0.1 M ammonium acetate to the sample, the use of a trapping solvent consisting of 0.4 M aqueous 1,1,1,3,3,3-hexafluoro-2-propanol (HFLP) adjusted to pH 7.0 with triethylamine plus 10 mM ammonium acetate during 8 min and the elution of the oligonucleotides with 0.4 M HFIP in 50% methanol. The potential of the optimized procedure is demonstrated for different synthetic oligonucleotides.     

Polystyrene-supported phosphine oxide-catalysed Beckmann rearrangement of ketoximes in 1,1,1,3,3,3-hexafluoro-2-propanol

A polystyrene-supported phosphine oxide-catalysed Beckmann rearrangement of ketoximes in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) has been developed. Good substrate compatibility, mild reaction conditions, good yields as well as the reusability of the catalyst/solvent made this procedure more environmentally benign.     

N,N-dimethylformamide-induced phase separation of hexafluoroisopropanol-water mixtures

We found that addition of N,N-dimethylformamide (DMF) induces phase separation of 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP)-water mixtures. The phase diagram of a DMF-HFIP-water ternary system at 298 K showed that phase separation occurs in a closed-loop area in the water-rich mole fraction range of x(H(2)O) > ～0.4. To clarify the mechanism of DMF-induced phase separation of DMF-HFIP-water mixtures at the molecular level, small-angle neutron scattering (SANS) and (1)H and (13)C NMR measurements were conducted on the mixtures with varying DMF concentrations along a volume ratio of HFIP to water of 1?:?1 (x(S)(HFIP) = 0.147). Additionally, the solvation structure of DMF in water and HFIP-water mixtures was elucidated by molecular dynamics (MD) simulations. The SANS results revealed that the inherent heterogeneity of HFIP-water mixtures is increased with increasing DMF concentration toward the lower phase separation concentration, but decreased when the DMF concentration further increased beyond the upper phase separation one. (1)H and (13)C NMR measurements and MD simulations suggested that preferential solvation of the hydrophobic moiety of DMF by HFIP is the main driver of the phase behaviour of the DMF-HFIP-water system.     

Molecular and electronic structures, infrared spectra, and vibrational assignment for ap and sc conformers of hexafluoro-iso-propanol

Comprehensive studies of the molecular structures, vibrational frequencies and infrared intensities of the antiperiplanar (ap) and synclinal (sc) conformers of 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) have been performed by the density functional (B3LYP) method using the extended 6-311++G(df,pd) basis set. The detailed natural bond orbital (NBO) analysis has revealed the nature of the hyperconjugative interactions, which stabilize each conformer, in the gas phase. The mid-infrared spectra of HFIP in carbon tetrachloride solution were measured, and the experimental intensities of each conformer were obtained by the curve–resolution procedure. The relative abundance of the two conformers, calculated from the relative intensities, shows nearly equimolar ratio (N_sc/N_ap ≈ 1), in this solution. The DFT-predicted frequencies show very good agreement with the experimental data. The clear-cut vibrational assignment for each conformer is reported on the basis of the calculated potential energy distributions. Several controversies in an earlier assignment of HFIP have been elucidated.     

Pictet-Spengler reactions catalyzed by Brønsted acid-surfactant-combined catalyst in water or aqueous media

Perfluorooctanesulfonic acid (PFOSA), Brønsted acid-surfactant-combined catalyst, efficiently catalyzes the Pictet-Spengler reactions of β-arylethyl carbamate derivatives with aldehydes in water. The present reaction is accelerated by the addition of 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP).     

Hexafluoroisopropanol: the magical solvent for Pd-catalyzed C–H activation

Among numerous solvents available for chemical transformations, 1,1,1,3,3,3-hexafluoro-2-propanol (popularly known as HFIP) has attracted enough attention of the scientific community in recent years. Several unique features of HFIP compared to its non-fluoro analogue isopropanol have helped this solvent to make a difference in various subdomains of organic chemistry. One such area is transition metal-catalyzed C–H bond functionalization reactions. While, on one side, HFIP is emerging as a green and sustainable deep eutectic solvent (DES), on the other side, a major proportion of Pd-catalyzed C–H functionalization is heavily relying on this solvent. In particular, for distal aromatic C–H functionalizations, the exceptional impact of HFIP to elevate the yield and selectivity has made this solvent irreplaceable. Recent research studies have also highlighted the H-bond-donating ability of HFIP to enhance the chiral induction in Pd-catalyzed atroposelective C–H activation. This perspective aims to portray different shades of HFIP as a magical solvent in Pd-catalyzed C–H functionalization reactions.

Among numerous solvents available for chemical transformations, 1,1,1,3,3,3-hexafluoro-2-propanol (popularly known as HFIP) has attracted enough attention of the scientific community in recent years.     

Synthesis of tetrahydroisoquinolines and isochromans via Pictet-Spengler reactions catalyzed by Brønsted acid-surfactant-combined catalyst in aqueous media

Perfluorooctanesulfonic acid (PFOSA), Brønsted acid-surfactant-combined catalyst, efficiently catalyzes the Pictet-Spengler reactions of β-arylethyl carbamate derivatives with aldehydes in water. The present reaction is accelerated by the addition of 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP). PFOSA in HFIP-water (10 v/v %) is also successfully applied to the oxa-Pictet-Spengler reactions of β-arylethyl alcohol compounds.     

A new finding in selective Baeyer-Villiger oxidation of α-fluorinated ketones; a new and practical route for the synthesis of α-fluorinated esters

α-Fluorinated esters were effectively prepared by the Baeyer-Villiger oxidation of α-fluorinated ketones with m-chloroperbenzoic acid (m-CPBA) under mild conditions. The yield of the esters was influenced by the choice of solvent, base, and substituent on the aryl group of the ketones. 4-Methoxyphenyl substituted fluoroketones were oxidized almost quantitatively with m-CPBA within 10 min to 12 h at room temperature using 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) as a cosolvent with CH₂Cl₂ (1:1, v/v) and aqueous buffer (KH₂PO₄-NaOH, pH 7.6) as an additive base. The oxidation reaction rates of α-fluorinated ketones were higher than those of the corresponding non-fluorinated ketones. The fluorine atom at α-position of fluoromethyl aryl ketones enhanced the reactivity in the Baeyer-Villiger oxidation.     

Improved regioselectivity in pyrazole formation through the use of fluorinated alcohols as solvents: synthesis and biological activity of fluorinated tebufenpyrad analogs

The preparation of N-methylpyrazoles is usually accomplished through reaction of a suitable 1,3-diketone with methylhydrazine in ethanol as the solvent. This strategy, however, leads to the formation of regioisomeric mixtures of N-methylpyrazoles, which sometimes are difficult to separate. We have determined that the use of fluorinated alcohols such as 2,2,2-trifluoroethanol (TFE) and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) as solvents dramatically increases the regioselectivity in the pyrazole formation, and we have used this modification in a straightforward synthesis of fluorinated analogs of Tebufenpyrad with acaricide activity.     

Enantiomeric separations of cationic and neutral compounds by capillary electrochromatography with monolithic chiral stationary phases of beta-cyclodextrin-bonded negatively charged polyacrylamide gels

Enantiomeric separation by capillary electrochromatography with beta-cyclodextrin-bonded negatively charged polyacrylamide gels was examined. The columns used are capillaries filled with a negatively charged polyacrylamide gel, a so-called monolithic stationary phase, to which allyl carbamoylated beta-CD (AC-beta-CD) derivatives covalently bind. The capillary wall is activated first with a bifunctional reagent to make the resulting gel bind covalently to the inner surface of the fused-silica tubing. Enantiomeric separations of 15 cationic compounds were achieved using the above-mentioned columns and mobile phases of 200 mmol l(-1) Tris-300 mmol I(-1) boric acid buffer (pH 7.0 or 9.0) or 200 mmol l(-1) Tris-300 mmol l(-1) boric acid buffer (pH 7.0) containing an achiral crown ether (18-crown-6). Enantiomeric separations of two neutral compounds were also achieved using 200 mmol l(-1) Tris-300 mmol l(-1) boric acid buffer (pH 9.0) as a mobile phase. High efficiencies of up to 150,000 plates m(-1) were obtained. Both the within- and between-run reproducibilities of retention time and separation factor were good. The reproducibilities of retention time and separation factor for three different columns prepared from a different batch of monomers were acceptable. The gel-filled capillaries were stable for at least 3 months with intermittent use, utilizing the mobile phase of 200 mmol I(-1) Tris-300 mmol I(-1) boric acid buffer (pH 9.0).     

Development of an ion-pair reversed-phase HPLC method with indirect UV detection for determination of phosphates and phosphites as impurities in sodium risedronate

A method based on RP-HPLC with indirect UV detection was developed for the determination of phosphates and phosphites as impurities in sodium risedronate. RP separation of the phosphates and phosphites was achieved by adding tetrabutylammonium hydroxide as an ion-pairing agent in the mobile phase. Potassium hydrogen phthalate was added to the mobile phase as an ionic chromophore in order to obtain high background absorption of the mobile phase. Separation was performed on a C18 column using a mixture of pH 8.2 buffer (containing 0.5 mM tetrabutylammonium hydroxide and 1 mM phthalate) and acetonitrile (95 + 5, v/v) as the mobile phase, with indirect UV detection at 248 nm. The validation of the method included determination of specificity/selectivity, linearity, LOD, LOQ, accuracy, precision, and robustness. The LOD was 0.86 microg/mL for phosphates and 0.76 microg/mL for phosphites. The LOQ was 2.60 microg/mL for phosphates and 2.29 microg/mL for phosphites. The developed method is suitable for quantitative determination of phosphates and phosphites as impurities in QC of sodium risedronate.     

Synthesis of succinimidyl-(S)-naproxen ester and its application for indirect enantioresolution of penicillamine by reversed-phase high-performance liquid chromatography

Synthesis of N-succinimidyl-(S)-2-(6-methoxynaphth-2-yl) propionate was carried out by the reaction of (S)-naproxen with N-hydroxysuccinimide in the presence of dicyclohexyl carbodiimide. It was characterized and was used as a chiral derivatizing reagent, under mild conditions, to form diastereomers of dl-penicillamine which were resolved by reversed-phase high-performance liquid chromatography using triethyl ammonium phosphate buffer (pH 4.0, 5mM)-acetonitrile (linear gradient (30min) of acetonitrile from 30 to 70%). Excellent separation was achieved with gradient mobile phase. The detection limit was at pmol level.     

Experimental and Theoretical Investigation of an Azaoxyallyl Cation-Templated Intramolecular Aryl Amination Leading to Oxindole Derivatives

Herein, development and detailed investigation of a S_N′-type intramolecular aromatic substitution reaction involving α-arylazaoxyallyl cation intermediate, is disclosed. The study showcased that while α-aryl-α-chlorohydroxamate could be activated by a combination of base and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) into the corresponding azaoxyallyl cations, it could further emerge into a π-extended species involving the adjacent α-aryl moiety, and this transition is contingent on electronic effects of the aromatic ring as well as on α-substituents. An effective activation of the α-aromatic ring could pave the path for intramolecular Ar(Csp²)-N bond formation towards oxindoles. Control experiments and DFT calculations suggested that a non-pericyclic nucleophilic amination pathway is most likely operative and precluded the possibility of concerted or electrophilic amination mechanism. HFIP as the reaction solvent plays pivotal roles in the transformation.     

Enantiomeric separation of amlodipine and its two chiral impurities by nano‐liquid chromatography and capillary electrochromatography using a chiral stationary phase based on cellulose tris(4‐chloro‐3‐methylphenylcarbamate)

In this work, a novel polysaccharide‐based chiral stationary phase, cellulose tris(4‐chloro‐3‐methylphenylcarbamate), also called Sepapak 4 has been evaluated for the chiral separation of amlodipine (AML) and its two impurities. AML is a powerful vasodilatator drug used for the treatment of hypertension. Capillary columns of 100 μm id packed with the chiral stationary phase were used for both nano‐LC and CEC experiments. The optimization of the mobile phase composed of ACN/water, (90:10, v/v) containing 15 mM ammonium borate pH 10.0 in nano‐LC allowed the chiral separation of AML and the two impurities, but not in a single run. With the purpose to obtain the separation of the three pairs of enantiomers simultaneously, CEC analyses were performed in the same conditions achieving better enantioresolution and higher separation efficiencies for each compound. To fully resolve the mixture of six enantiomers, parameters such as buffer pH and concentration sample injection have been then investigated. A mixture of ACN/water (90:10, v/v) containing 5 mM ammonium borate buffer pH 9.0 enabled the complete separation of the three couples of enantiomers in less than 30 min. The optimized CEC method was therefore validated and applied to the analysis of pharmaceutical formulation declared to contain only AML racemate.     

Dramatic acceleration of olefin epoxidation in fluorinated alcohols: activation of hydrogen peroxide by multiple h-bond networks

In 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) as solvent, the epoxidation of olefins by hydrogen peroxide is accelerated up to ca. 100 000-fold (relative to that in 1,4-dioxane as solvent). The mechanistic basis of this effect was investigated kinetically and theoretically. The kinetics of the epoxidation of Z-cyclooctene provided evidence that higher-order solvent aggregates (rate order in HFIP ca. 3) are responsible for the rate acceleration. Activation parameters (DeltaS++ = -39 cal/mol.K) indicated a highly ordered transition state in the rate-determining step. In line with these findings, DFT simulations revealed a pronounced decrease of the activation barrier for oxygen transfer from H(2)O(2) to ethene with increasing number of (specifically) coordinated HFIP molecules. The oxygen transfer was unambiguously identified as a polar concerted process. Simulations (combined DFT and MP2) of the epoxidation of Z-butene were in excellent agreement with the experimental data obtained in the epoxidation of Z-cyclooctene (activation enthalpy, entropy, and kinetic rate order in HFIP of 3), supporting the validity of our mechanistic model.     

Temperature optimization for improved determination of phosphatidylserine species by micro liquid chromatography with electrospray tandem mass spectrometric detection

A sensitive method for determination of disaturated phosphatidylserine species in the presence of their monounsaturated analogs has been developed, using micro liquid chromatography coupled to electrospray ionization tandem mass spectrometry. The hydrophobic nature of the phosphatidylserine species required a combination of low-eluting sample solvents and sub-ambient temperatures in order to focus large sample volumes up to 20 microL. The samples were dissolved in 2-propanol:hexane:water (20:10:4, v/v/v) prior to 1:9 dilution with ammonium formate buffer:2-propanol:tetrahydrofuran (30:55:15, v/v/v) and final 1:4 dilution with ammonium formate buffer (10 mM):2-propanol: tetrahydrofuran (55:37.5:7.5, v/v/v). The analytical column was a 0.5 x 150 mm stainless steel column packed with 5 microm C30 particles, while the mobile phase contained ammonium formate buffer (10 mM): 2-propanol:tetrahydrofuran (30:55:15, v/v/v). A temperature program from 5 degrees C (hold for 3 minutes) to 75 degrees C at 8 K/min provided separation of the disaturated phosphatidylserine species from their monounsaturated analogs, making available a sensitive determination of the isobaric species. The mass limit of detection for dipalmitoyl phosphatidylserine was 100 pg, corresponding to a concentration limit of detection of 5 pg/microL when using an injection volume of 20 microL. This is an improvement by a factor of 20 as compared to previously reported numbers obtained with conventional LC columns. The within-assay precision of dipalmitoyl phosphatidylserine was 11.9% RSD (n = 3), while the retention time precision was 4.1% RSD (n = 6).     

On-column amperometric detection in capillary electrophoresis with an improved high-voltage electric field decoupler

The analysis of polyamide-6 oligomers and polymer is usually performed with expensive fluorinated alcohols like 2,2,2-trifluoroethanol (TFE) or 1,1,1,3,3,3-hexafluoroisopropanol (HFIP). Formic acid is well known as a mobile phase additive to adjust pH in reversed-phase high-performance liquid chromatography. However, formic acid is seldom used as a modifier to perform gradient elution chromatography on octadecyl-modified silica-based columns. Here we demonstrate the determination of cyclic and linear polyamide-6 oligomers using formic acid as a modifier on an octadecyl-modified silica-based column. This column was shown to be stable for more than 5000 column volumes, even when a mobile phase of 65-95% formic acid in water at a flow of 1 ml/min is applied. With formic acid under the conditions used (65-95% formic acid in water) the oligomers are retained on the column, while the polymer does not precipitate. In comparison, during adsorption and separation with a HFIP gradient, precipitation of the polymer occurs. The implications of the different separation mechanisms, i.e., adsorption vs. precipitation chromatography are discussed. Loadability is shown to be much better with the formic acid system. However, with formic acid as a modifier UV detection below 250 nm is not feasible. The less sensitive evaporative light scattering detector is used to detect the polyamide oligomers in the formic acid phase. In addition it is shown that capillary zone electrophoresis (CZE) with UV-absorbance detection using HFIP is an attractive combination as HFIP is UV-transparent and CZE allows low modifier consumption.     

Synthesis of Soluble Quinacridone Photocatalysts for the Homogeneous Oxidation of Thioethers

Evaluation of quinacridone (QA) derivatives as homogeneous metal-free photocatalysts is here presented. QA derivatives were synthetized and systematically characterized, measuring their ground state and excited state redox potentials in dichloromethane (DCM) and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP), in order to understand how structural modifications influenced their photocatalytic properties. In particular, the effect of dicyanomethylene and nitro EWG groups was investigated, in order to develop a photocatalyst capable of promoting oxidative processes in the presence of molecular oxygen. Among the analyzed derivatives, 2,9-dinitro-N,N′-dibutylquinacridone (DNDBQA) was the one with the highest excited state reduction potential (E_red*=1.60 V in HFIP vs SCE), while N,N’-dibutylquinacridone (DBQA) showed valuable excited state redox potentials (E_red*=1.29 V; E_ox*=−1.28 V in HFIP vs SCE), making it suitable for bimodal applications in oxidative and reductive photocatalytic processes. Afterwards, the synthetized QA derivatives were examined as photocatalysts to promote the selective aerobic oxidation of thioether to sulfoxide. Promising results in thioanisole oxidation were achieved with all the QA derivatives tested as photocatalysts, in terms of yield and selectivity. Remarkably, DBQA showed the best performances, catalyzing the reaction in only 20 minutes, using 0.5 % of the photocatalyst, and showing excellent performances in the oxidation of several thioether derivatives.     

Methoxy-substituted stilbenes, styrenes, and 1-arylpropenes: photophysical properties and photoadditions of alcohols

The photochemistry of trans-stilbene and four methoxy-substituted stilbene derivatives has been investigated in a variety of solvents. The fluorescence of all five trans isomers was quenched by 2,2,2-trifluoroethanol (TFE). Upon irradiation of the five substrates in TFE, the products derived from photoaddition of the solvent were detected. Nuclear magnetic resonance spectroscopy of the products formed by irradiation in TFE-OD indicated that the proton and nucleophile are attached to two adjacent atoms of the original alkene double bond. Irradiation of the corresponding methoxy-substituted styrenes and trans-1-arylpropenes in TFE produced the analogous solvent adducts. The photoaddition of TFE proceeded with the general order of reactivity: styrenes > trans-1-arylpropenes > trans-stilbenes. Transient carbocation intermediates were observed following laser flash photolysis of the stilbenes in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP). The results are consistent with a mechanism that involves photoprotonation of the substrates by TFE or HFIP, followed by nucleophilic trapping of short-lived carbocation intermediates. Compared to the other stilbene derivatives, trans-3,5-dimethoxystilbene displayed a large quantum yield of fluorescence and a low quantum yield of trans-cis isomerization in polar organic solvents. The unique photophysical properties of trans-3,5-dimethoxystilbene are attributed to formation of a highly polarized charge-transfer excited state (mu(e) = 13.2 D).