Monitoring subcellular biotransformation of N-l-leucyldoxorubicin by micellar electrokinetic capillary chromatography coupled to laser-induced fluorescence detection

Development of prodrugs is a promising alternative to address cytotoxicity and nonspecificity of common anticancer agents. N-l-leucyldoxorubicin (LeuDox) is a prodrug that is biotransformed to the anticancer drug doxorubicin (Dox) in the extracellular space; however, its biotransformation may also occur intracellularly in endocytic organelles. Such organelle-specific biotransformation is yet to be determined. In this study, magnetically enriched endocytic organelle fractions from human uterine sarcoma cells were treated with LeuDox. Micellar electrokinetic chromatography with laser-induced fluorescence detection (MEKC-LIF) was used to determine that 10 % of LeuDox was biotransformed to Dox, accounting for ～43 % of the biotransformation occurring in the post-nuclear fraction. This finding suggests that endocytic organelles also participate in the intracellular biotransformation of LeuDox to Dox.

Raman spectroscopic identification of single bacterial cells under antibiotic influence

The identification of pathogenic bacteria is a frequently required task. Current identification procedures are usually either time-consuming due to necessary cultivation steps or expensive and demanding in their application. Furthermore, previous treatment of a patient with antibiotics often renders routine analysis by culturing difficult. Since Raman microspectroscopy allows for the identification of single bacterial cells, it can be used to identify such difficult to culture bacteria. Yet until now, there have been no investigations whether antibiotic treatment of the bacteria influences the Raman spectroscopic identification. This study aims to rapidly identify bacteria that have been subjected to antibiotic treatment on single cell level with Raman microspectroscopy. Two strains of Escherichia coli and two species of Pseudomonas have been treated with four antibiotics, all targeting different sites of the bacteria. With Raman spectra from untreated bacteria, a linear discriminant analysis (LDA) model is built, which successfully identifies the species of independent untreated bacteria. Upon treatment of the bacteria with subinhibitory concentrations of ampicillin, ciprofloxacin, gentamicin, and sulfamethoxazole, the LDA model achieves species identification accuracies of 85.4, 95.3, 89.9, and 97.3 %, respectively. Increasing the antibiotic concentrations has no effect on the identification performance. An ampicillin-resistant strain of E. coli and a sample of P. aeruginosa are successfully identified as well. General representation of antibiotic stress in the training data improves species identification performance, while representation of a specific antibiotic improves strain distinction capability. In conclusion, the identification of antibiotically treated bacteria is possible with Raman microspectroscopy for diverse antibiotics on single cell level.

Sensitive detection of enteropathogenic E. coli using a bfpA gene-based electrochemical sensor

We have developed a sensitive assay for enteropathogenic E. coli (EPEC) by integrating DNA extraction, specific polymerase chain reaction (PCR) and DNA detection using an electrode modified with the bundle-forming pilus (bfpA) structural gene. The PCR amplified products are captured on the electrode and hybridized with biotinylated detection probes to form a sandwich hybrid containing two biotinylated detection probes. The sandwich hybridization structure significantly combined the numerous streptavidin alkaline phosphatase on the electrode by biotin-streptavidin connectors. Electrochemical readout is based on dual signal amplification by both the sandwich hybridization structure and the enzyme. The electrode can satisfactorily discriminate complementary and mismatched oligonucleotides. Under optimal conditions, synthetic target DNA can be detected in the 1 pM to 10 nM concentration range, with a detection limit of 0.3 pM. EPEC can be quantified in the 10 to 10⁷ CFU mL^?1 levels within 3.5 h. The method also is believed to present a powerful platform for the screening of pathogenic microorganisms in clinical diagnostics, food safety and environmental monitoring.

Gas-Phase Arylmethyl Transfer and Cyclodeamination of Argentinated N-Arylmethyl-Pyridin-2-Ylmethanimine

In collisional activation of argentinated N-arylmethyl-pyridin-2-ylmethanimine, a neutral molecule of AgNH₂ is eliminated, carrying one hydrogen from the methylene and the other one from the ortho position (relative to the ipso carbon) of the aryl ring. Taking argentinated N-benzyl-pyridin-2-ylmethanimine for example, the proposition that the AgNH₂ loss results from intramolecular arylmethyl transfer combined with cyclodeamination is rationalized by deuterium labeling experiments, blocking experiments, and theoretical calculations. The structure of the final product ion from loss of AgNH₂ was confirmed further by multistage mass spectrometry.

Model system for targeted drug release triggered by immune-specific signals

A new sense-and-act system was realized by integrating a biocatalytic/bioaffinity electrode responding to immune signals represented by an antibody and a polymer-modified electrode loaded with drug-mimicking species. The release of the drug-mimicking species was achieved specifically in response to a signal antibody, thus demonstrating for the first time an immune-induced drug-releasing process. The present approach promises new options for future applications in controlled drug release and personalized medicine.

Microfluidic robotic device coupled with electrochemical sensor field for handling of paramagnetic micro-particles as a tool for determination of plant mRNA

The expression of genes responsible for the biosynthesis of stress proteins corresponds to the exposition of an organism to abiotic and/or biotic stress. We utilize two types of paramagnetic particles for isolation of total mRNA from early somatic embryos of Norway Spruce (Picea abies /L./ Karst.) and maize plants (Zea mays L.) treated with cadmium(II) ions. The paramagnetic particles were evaluated for analysis of real samples, and poly-adenine was used as a model mRNA. Various approaches (from non-automatic to fully automatic) were tested in terms of handling the particles.

New validated HPLC methodology for the determination of (−)-trans-paroxetine and its enantiomer in pharmaceutical formulations with use of ovomucoid chiral stationary phase

A new chromatographic method for the enantioseparation and the determination of (?)-trans-paroxetine and (+)-trans-paroxetine has been developed with the aid of amylose ovomucoid-based chiral stationary phase. The method is faster and five times more sensitive than procedures recommended previously: limit of detection and limit of quantification are 5 and 16 ng/mL, respectively [modified (Ferretti et al. in J Chromatogr B 710:157–164, 1998): 20 and 60 ng/mL]. It was carefully validated and applied for the determination of (?)-trans-paroxetine and (+)-trans-paroxetine in Parogen (Mc Dermott Laboratories Ltd.) and Xetanor (Actavis) coated tablets.

Simultaneous determination of multi-class antibiotic residues in water using carrier-mediated hollow-fiber liquid-phase microextraction coupled with ultra-high performance liquid chromatography tandem mass spectrometry

A method has been developed for carrier-mediated hollow-fiber liquid-phase microextraction (HF-LPME) and enrichment of multiple classes of antibiotics in water samples. Eleven compounds (erythromycin, spiramycin, tilmicosin, sulfathiazole, sulfamethazine, sulfamerazine, oxytetracycline, tetracycline, ciprofloxacin, danofloxacin and enrofloxacin) from four important classes of antibiotics (of the macrolide, sulfonamide, tetracycline and quinolone type) have been simultaneously preconcentrated with one set of HF-LPME conditions, followed by determination by ultra-HPLC combined with electrospray ionization tandem mass spectrometry (UHPLC-MS/MS). Antibiotics can be determined at ng L^?1 levels using this highly sensitive and selective method. Parameters including immersion time, liquid membrane composition, sample pH, acceptor composition and extraction time were optimized to finally give detection limits in the 10?C250?ng?L^?1 range. Good linearity was achieved, with up to 156 times enrichment over the four classes of antibiotics. This multi-residue method enabled the simultaneous enrichment of all 11 multi-class antibiotics from spiked river water samples, with relative recovery between 79 and 118%.

Electrochemical DNA biosensor for the detection of Trichoderma harzianum based on a gold electrode modified with a composite membrane made from an ionic liquid, ZnO nanoparticles and chitosan, and by using acridine orange as a redox indicator

An electrochemical DNA biosensor was developed that is based on a gold electrode modified with a nanocomposite membrane made from an ionic liquid, ZnO nanoparticles and chitosan. A single-stranded DNA probe was immobilized on this electrode. Acridine orange was used as the hybridization probe for monitoring the hybridization of the target DNA. The biosensor was capable of detecting target DNA in the concentration range from 1.0?×?10?C14 to 1.8?×?10?C4?mol?L-1, with a detection limit of 1.0?×?10?C15?mol?L-1. The approach towards constructing a DNA biosensor allows studies on the hybridization even with crude DNA fragments and also to analyze sample obtained from real samples. The results show that the DNA biosensor has the potential for sensitive detection of a specific sequence of the Trichoderma harzianum gene and provides a quick, sensitive and convenient method for the study of microorganisms.

Rapid separation of four probiotic bacteria in mixed samples using microchip electrophoresis with laser-induced fluorescence detection

Microchip electrophoresis (MCE) coupled to laser-induced fluorescence detection was applied to the rapid separation of Bifidobacterium, Lactobacillus casei, Lactobacillus acidophilus, and Enterococccus faecalis. All bacteria were quickly separated within 150?s using a running buffer of pH 8.5 containing Tris, borate, EDTA, and poly(ethylene oxide). The latter was crucial to reduce the bacterial adsorption on the walls of the microchannels. The pH of 8.5 warrants that bacteria carry a negative charge at their surface and thus display good electrophoretic performance. The method was used to analyze medical samples containing these probiotics, and the results showed that the identification and detection of bacteria by MCE is advantageous in terms of sample consumption, waste production, time of analysis, and instrumental effort.

Capillary liquid chromatographic fingerprint used for discrimination of Zingiber montanum from related species

Fingerprint analysis using capillary liquid chromatography (CLC) has been developed for discrimination of Zingiber montanum (ZM) from related species, for example Z. americans (ZA) and Z. zerumbet (ZZ). By comparing the fingerprint chromatograms of ZM, ZA, and ZZ we could identify ZM samples and discriminate them from ZA and ZZ by using their marker peaks. We also combined CLC fingerprint with multivariate analysis, including principal-component analysis (PCA) and canonical variate analysis (CVA); all three species were discriminated successfully. This result indicates that CLC fingerprint analysis in combination with PCA and CVA can be used for discrimination of ZM samples from samples of related species.

Bacterial Spores Survive Electrospray Charging and Desolvation

The survivability of Bacillus subtilis spores and vegetative Escherichia coli cells after electrospray from aqueous suspension was tested using mobility experiments at atmospheric pressure. E. coli did not survive electrospray charging and desolvation, but B. subtilis did. Experimental conditions ensured that any surviving bacteria were de-agglomerated, desolvated, and electrically charged. Based on mobility measurements, B. subtilis spores survived even with 2,000–20,000 positive charges. B. subtilis was also found to survive introduction into vacuum after either positive or negative electrospray. Attempts to measure the charge distribution of viable B. subtilis spores using electrostatic deflection in vacuum were inconclusive; however, viable spores with low charge states (less than 42 positive or less than 26 negative charges) were observed.

Part I: characterization of the extracellular proteome of the extreme thermophile Caldicellulosiruptor saccharolyticus by GeLC-MS2

The proteome of extremely thermophilic microorganisms affords a glimpse into the dynamics of microbial ecology of high temperature environments. The secretome, or extracellular proteome of these microorganisms, no doubt harbors technologically important enzymes and other thermostable biomolecules that, to date, have been characterized only to a limited extent. In the first of a two-part study on selected thermophiles, defining the secretome requires a sample preparation method that has no negative impact on all downstream experiments. Following efficient secretome purification, GeLC-MS² analysis and prediction servers suggested probable protein secretion to complement experimental data. In an effort to define the extracellular proteome of the extreme thermophilic bacterium Caldicellulosiruptor saccharolyticus, several techniques were considered regarding sample processing to achieve the most in-depth analysis of secreted proteins. Order of operation experiments, all including the C₁₈ bead technique, demonstrated that two levels of sample purification were necessary to effectively desalt the sample and provide sufficient protein identifications. Five sample preparation combinations yielded 71 proteins and the majority described, as enzymatic and putative uncharacterized proteins, anticipate consolidated bioprocessing applications. Nineteen proteins were predicted by Phobius, SignalP, SecretomeP, or TatP for extracellular secretion, and 11 contained transmembrane domain stretches suggested by Phobius and transmembrane hidden Markov model. The sample preparation technique demonstrating the most effective outcome for C. saccharolyticus secreted proteins in this study, involved acetone precipitation followed by the C₁₈ bead method in which 2.4% (63 proteins) of the predicted proteome was identified, including proteins suggested to have secretion and transmembrane moieties.

Development of a direct ELISA based on carboxy-terminal of penicillin-binding protein BlaR for the detection of β-lactam antibiotics in foods

β-Lactam antibiotics, including penicillins and cephalosporins, are commonly used in veterinary medicine. Illegal use and abuse of β-lactams could cause allergy and selected bacterial resistance. BlaR-CTD, the carboxy-terminal of penicillin-recognizing protein BlaR from Bacillus licheniformis ATCC 14580, was utilized in this study to develop a receptor-based ELISA for detection and determination of β-lactam antibiotics in milk, beef, and chicken. This assay was based on directly competitive inhibition of binding of horseradish peroxidase-labeled ampicillin to the immobilized BlaR-CTD by β-lactams. The assay was developed as screening test with the option as semiquantitative assay, when the identity of a single type of residual β-lactam was known. The IC₅₀ values of 15 β-lactam antibiotics, including benzylpenicillin, ampicillin, amoxicillin, dicloxacillin, oxacillin, nafcillin, cefapirin, cefoperazone, cefalotin, cefazolin, cefquinome, ceftriaxone, cefotaxime, cefalexin, ceftiofur and its metabolite desfuroylceftiofur were evaluated and ranged from 0.18 to 170.81 μg L^?1. Simple sample extraction method was carried out with only phosphate-buffered saline, and the recoveries of selected β-lactam antibiotics in milk, beef, and chicken were in the range of 53.27 to 128.29 %, most ranging from 60 to 120 %. The inter-assay variability was below 30 %. Limits of detection in milk, beef, and chicken muscles with cefquinome matrix calibration were 2.10, 30.68, and 31.13 μg kg^?1, respectively. This study firstly established a rapid, simple, and accurate method for simultaneous detection of 15 β-lactams in edible tissues, among which 11 β-lactams controlled by European Union could be detected below maximum residue limits.

Non-destructive depth profile reconstruction of bio-engineered surfaces by parallel-angle-resolved X-ray photoelectron spectroscopy

In the present, contribution angle-resolved X-ray photoelectron spectroscopy (AR-XPS) was proposed as a useful tool to address the challenge of probing the near-surface region of bio-active sensor surfaces. A model bio-functionalised surface was characterised by parallel AR-XPS and commercially available Thermo Avantage-ARProcess software was used to generate non-destructive concentration depth profiles of protein-functionalised silicon oxide substrates. At each step of the functionalisation procedure, the surface composition, the overlayer thickness, the in-depth organisation and the in-plane homogeneity were evaluated. The critical discussion of the generated profiles highlighted the relevance of the information provided by PAR-XPS technique.

Improved MALDI-TOF Microbial Mass Spectrometry Imaging by Application of a Dispersed Solid Matrix

The key step in high quality microbial matrix-assisted laser desorption/ionization mass spectrometry imaging (microbial MALDI MSI) is the fabrication of a homogeneous matrix coating showing a fine-grained morphology. This application note addresses a novel method to apply solid MALDI matrices onto microbial cultures grown on thin agar media. A suspension of a mixture of 2,5-DHB and α-CHCA is sprayed onto the agar sample surface to form highly homogeneous matrix coatings. As a result, the signal intensities of metabolites secreted by the fungus Aspergillus fumigatus were found to be clearly enhanced.

Soft Ionization of Saturated Hydrocarbons, Alcohols and Nonpolar Compounds by Negative-Ion Direct Analysis in Real-Time Mass Spectrometry

Large polarizable n-alkanes (approximately C18 and larger), alcohols, and other nonpolar compounds can be detected as negative ions when sample solutions are injected directly into the sampling orifice of the atmospheric pressure interface of the time-of-flight mass spectrometer with the direct analysis in real time (DART) ion source operating in negative-ion mode. The mass spectra are dominated by peaks corresponding to [M + O₂]￣^?. No fragmentation is observed, making this a very soft ionization technique for samples that are otherwise difficult to analyze by DART. Detection limits for cholesterol were determined to be in the low nanogram range.

The Effective Temperature of Ions Stored in a Linear Quadrupole Ion Trap Mass Spectrometer

The extent of internal energy deposition into ions upon storage, radial ejection, and detection using a linear quadrupole ion trap mass spectrometer is investigated as a function of ion size (m/z 59 to 810) using seven ion-molecule thermometer reactions that have well characterized reaction entropies and enthalpies. The average effective temperatures of the reactants and products of the ion-molecule reactions, which were obtained from ion-molecule equilibrium measurements, range from 295 to 350 K and do not depend significantly on the number of trapped ions, m/z value, ion trap q _z value, reaction enthalpy/entropy, or the number of vibrational degrees of freedom for the seven reactions investigated. The average of the effective temperature values obtained for all seven thermometer reactions is 318?±?23 K, which indicates that linear quadrupole ion trap mass spectrometers can be used to study the structure(s) and reactivity of ions at near ambient temperature.

Optimal experimental designs in RPLC at variable solvent content and pH based on prediction error surfaces

When pH is used as factor in reversed-phase liquid chromatographic (RPLC) separations, the need for providing quality and informative data with the minimal experimental effort becomes imperative. The most rational way to achieve this is by means of experimental designs. The interest in finding optimal designs involving solvent content and pH in RPLC is considerable, since these factors allow large variations in selectivity when ionisable compounds are involved. Unfortunately, the equations that describe the retention of these compounds with pH are nonlinear. As a consequence, factorial and other designs based on geometrical considerations are not well suited, whereas D-optimal and related designs can only be applied in an iterative fashion. In this work, an extension of G-optimal designs, aimed to enhance the quality of the predictions, is examined for problems involving solvent content and pH. The study was carried out with a set of probe ionisable compounds, for which information on retention behaviour was accurately known. A stepwise strategy was used to obtain a rapid estimation of the best design with a given number of experiments. The objective of the study was to investigate the distribution and number of points in the ideal design for compounds of different acid?Cbase behaviour, and the possibility of finding common designs for groups of compounds. A further goal was to derive design construction rules containing the information requirements, without needing any further mathematical treatment.