The relationship between acidic activation and microstructural changes in montmorillonite from Heping, China

The montmorillonite sample from Heping, China had been studied by chemical analysis, XRD, IR, AFM and MAS NMR. The results showed that acid concentration had much influence on surface structure of montmorillonite. When the acid concentration reached 2M, the Q3Si structure in silica-oxygen tetrahedron recombined, some Q3Si structure in montmorillonite transformed to distortion Q3Si structure and Q4Si structure. However, the structure of Al had no changes, according with the observation results of atomic force microscope. The Br?nsted acid site of montmorillonite increases with the accretion of the concentration of acid activation, while oversize concentration of acid activation will decrease the surface site of montmorillonite.     

The thermal degradation behaviour of polydimethylsiloxane/montmorillonite nanocomposites

A series of novel polydimethylsiloxane/montmorillonite (PDMS/MMT) nanocomposites was prepared. The thermal degradation behaviour of these nanocomposites was studied by means of Thermal Volatilization Analysis (TVA) and Thermogravimetric Analysis (TGA). The major degradation products were identified as cyclic oligomeric siloxanes from D₃ to D_7, and higher oligomeric siloxane residues. Other minor degradation products include methane, bis-pentamethylcyclotrisiloxane, propene, propanal, benzene and dimethylsilanone. The results demonstrate that the nanoclay significantly alters the degradation behaviour of the PDMS network, modifying the profile of the thermal degradation and reducing the overall rate of volatiles evolution. The results also indicate that the nanoclay promotes the formation of dimethylsilanone and benzene by inducing low levels of radical chain scission.     

Effect of montmorillonite treatment on the thermal stability of poly(vinyl chloride) nanocomposites

The aim of this research was to study the effect of different intercalants on the thermal degradation/dehydrochlorination of poly(vinyl chloride) (PVC). PVC nanocomposites were prepared containing 2 phr of montmorillonite clay. The montmorillonite was treated with different organic intercalants and analysed by thermogravimetric analysis and X-ray diffraction. All intercalants were found to intercalate the clay. The nanocomposites were prepared on a two-roll mill and pressed into 0.7 mm thick plates. The degradation was analysed by yellowness index, Congo red test and UV–visible spectroscopy. All cationic intercalants were found to accelerate the dehydrochlorination of PVC whereas the non-ionic did not affect thermal degradation. On the other hand, some non-ionic intercalants showed poor dispersion.     

Polymer/montmorillonite nanocomposites with improved thermal properties: Part I. Factors influencing thermal stability and mechanisms of thermal stability improvement

The results of recent research indicate that the introduction of layered silicate - montmorillonite - into polymer matrix results in increase of thermal stability of a number of polymer nanocomposites. Due to characteristic structure of layers in polymer matrix and nanoscopic dimensions of filler particles, several effects have been observed that can explain the changes in thermal properties. The level of surface activity may be directly influenced by the mechanical interfacial adhesion or thermal stability of organic compound used to modify montmorillonite. Thus, increasing the thermal stability of montmorillonite and resultant nanocomposites is one of the key points in the successful technical application of polymer-clay nanocomposites on the industrial scale. Basing on most recent research, this work presents a detailed examination of factors influencing thermal stability, including the role of chemical constitution of organic modifier, composition and structure of nanocomposites, and mechanisms of improvement of thermal stability in polymer/montmorillonite nanocomposites.     

Darstellung,Kristallstrukturen und Schwingungsspektren von [(Mo6X)Y]2–; Xi = Cl,Br; Ya = NO3, NO2

Synthesis, Crystal Structures, and Vibrational Spectra of [(Mo₆X)Y]^2–; Xⁱ = Cl, Br; Y^a = NO₃, NO₂ By treatment of [(Mo₆X)Y]^2–; Xⁱ = Y^a = Cl, Br with AgNO₃ or AgNO₂ by strictly exclusion of oxygene in acetone the hexanitrato and hexanitrito cluster anions [(Mo₆X)Y]^2–, Y^a = NO₂, NO₃ are formed. X-ray structure determinations of (Ph₄As)₂[(Mo₆Cl)(NO₃)] · 2 Me₂CO ( 1 ) (monoclinic, space group P2₁/n, a = 12.696(3), b = 21.526(1), c = 14.275(5) Å, β = 115.02(2)°, Z = 2), (n-Bu₄N)₂[(Mo₆Br)(NO₃)] · 2 CH₂Cl₂ ( 2 ) (monoclinic, space group P2₁/n, a = 14.390(5), b = 11.216(5), c = 21.179(5)Å, β = 96.475(5)°, Z = 2) and (Ph₄P)₂[(Mo₆Cl)(NO₂)] (3) (monoclinic, space group P2₁/n, a = 11.823(5), b = 13.415(5), c = 19.286(5) Å, β = 105.090(5)°, Z = 2) reveal the coordination of the ligands via O atoms with (Mo–O) bond lengths of 2.11–2.13 Å, and (MoON) angles of 122–131°. The vibrational spectra of the nitrato compounds show the typical innerligand vibrations ν_as(NO₂) (∼ 1500), ν_s(NO₂) (∼ 1270) and ν(NO) (∼ 980 cm^–1). The stretching vibrations ν(N=O) at 1460–1490 cm^–1 and ν(N–O) in the range of 950–1000 cm^–1 are characteristic for nitrito ligands coordinated via O atoms.     

Crosslinking investigation of polybutadiene thermal degradation by carbon-13 nuclear magnetic resonance

Thermal degradation of polybutadiene (PBD) in anaerobic atmosphere at 250 °C had been studied by carbon-13 nuclear magnetic resonance spectroscopy (¹³C NMR) before complete crosslinking. In this investigation four types of low molecular weight PBD with different 1,2-vinyl isomer content had been chosen, then pure and mixed samples of PBD were heated in different time periods. ¹³C NMR spectra showed that two kinds of crosslinking mechanisms occur that both of them produce methyl groups. The first mechanism is a reaction between 1,2-vinyl isomers of two PBD chains, and the second one occurs between 1,2-vinyl isomer of one chain via methylene carbon of cis or trans isomer in another chain. Also ¹³C NMR results showed that the presence of 1,2-vinyl isomer in the PBD structure is necessary and without it none of the mentioned reactions will occur. Furthermore isomers sequence is another important parameter which affects crosslinking. Results show that cis or trans isomer which is not adjacent to 1,2-vinyl isomer does not take part in crosslinking reaction. Moreover such cis or trans isomer can take part in second mechanism of crosslinking that 1,2-vinyl isomer was attached from head to cis or trans isomer, thus in this arrangement of isomers second mechanism of crosslinking will become dominant rather than first mechanism of crosslinking.     

Study of elastomeric polyurethane nanocomposites prepared from grafted organic–montmorillonite

4,4′-Diphenylmethane diisocyanate (MDI) was grafted on to organic–montmorillonite (OMMT) by reaction between hydroxyl groups (−OH) on surface of the montmorillonite and the isocyanate groups (−NCO) of MDI, thus forming grafted organic–montmorillonite (MOMMT). Intercalated nanocomposites based on polyurethane (PU) and MOMMT were prepared by solution intercalation technology. The interface interaction of PU/MOMMT nanocomposites was better than that of PU/MMT composites. The tensile strength, elongation at break, and tear strength of the PU/MOMMT nanocomposites increased for MOMMT content up to 5% w/w, and then decreased with further increase in MOMMT content. At the same filler content, the tensile strength and tear strength of PU/MOMMT nanocomposites were higher than those of PU/OMMT nanocomposites, whereas the elongations at break of PU/MOMMT nanocomposites were smaller than those of PU/OMMT nanocomposites. The initial temperatures of weight loss of PU/MOMMT nanocomposites were lower than for PU/MMT composites in the first step of thermal degradation, whereas in the second step initial temperatures of weight loss were higher for PU/MOMMT nanocomposites.     

Synthesis and mass spectrometric study of α,ω-diallylpermethyloligosilanes

Representatives of the homologous series of α,ω-diallylpermethyloligosilanes were synthesized for the first time by the reaction of α,ω-dichloropermethyloligosilanes Cl(Me₂Si)_nCl (n = 2–6) with allylmagnesium chloride. Fragmentation of α,ω-diallylpermethyloligosilanes under electron impact ionization was studied by mass spectrometry.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2129–2132, October, 2004.     

Reaktionen von [B12H12–n(OH)n]2–, n = 1, 2 mit Säuredichloriden und Kristallstruktur von Cs2[1,2-B12H10(ox)] · CH3OH

Reactions of [B₁₂H_12–n(OH)_n]^2–, n = 1, 2 with Acid Dichlorides and Crystal Structure of Cs₂[1,2-B₁₂H₁₀(ox)] · CH₃OH By treatment of [B₁₂H₁₁(OH)]^2– with organic and inorganic acid dichlorides in acetonitrile the bridged dicluster compounds [B₁₂H₁₁(ox)B₁₂H₁₁)]^4– ( 1 ), [B₁₂H₁₁(p-OOCC₆H₄COO)B₁₂H₁₁]^4– ( 2 ), [B₁₂H₁₁(m-OOCC₆H₄COO)B₁₂H₁₁]^4– ( 3 ), [B₁₂H₁₁(SO₃)B₁₂H₁₁]^4– ( 4 ), [B₁₂H₁₁(SO₄)B₁₂H₁₁]^4– ( 5 ) are obtained in good yields. The dihydroxododecaborates [1,2-B₁₂H₁₀(OH)₂]^2– and [1,7-B₁₂H₁₀(OH)₂]^2– afford clusters with an anellated ring: [1,2-B₁₂H₁₀(ox)]^2– ( 6 ), [1,2-B₁₂H₁₀(SO₄)]^2– ( 7 ) and [1,7-B₁₂H₁₀(OOC(CH₂)₈COO)]^2– ( 8 ). Isomerically pure [1,7-B₁₂H₁₀(OH)₂]^2– ( 9 ) is formed by reaction of (H₃O)₂[B₁₂H₁₂] with ethylene glycol. All new compounds are characterized by vibrational, ¹¹B, ¹³C and ¹H NMR spectra. The crystal structure of Cs₂[1,2-B₁₂H₁₀(ox)] · CH₃OH (monoclinic, space group P 2₁/c, a = 9.616(2), b = 10.817(1), c = 15.875(6) Å, β = 95.84(8)°, Z = 4) reveals a distortion of the B₁₂ icosahedron caused by the anellated six-membered heteroring.     

Darstellung,Kristallstrukturen, Schwingungsspektren und Normalkoordinatenanalyse von [(Mo6Br)Y]2−; Ya  CN,NCS

Preparation, Crystal Structures, Vibrational Spectra, and Normal Coordinate Analysis of [(Mo₆Br )Y ]^2?; Y^a ? CN, NCS By treatment of [(Mo₆Br)Br^a₆]^2? with AgNO₃ in acetone and addition of KCN or KNCS the hexacyano and hexaisothiocyanato derivates [(Mo₆Br)Y]^2?, Y^a ? CN, NCS are formed. X-ray structure determinations of (Ph₄P)₂ [(Mo₆Br)(CN)^a₆]·4H₂ O ( 1 ) (triclinic, spacegroup P1, a = 11.63(3), b = 11.85(1), c = 14.23(5) Å, α = 71.8(1)°, β = 67.6(3)°, γ = 62.8(1)°, Z= 1) and (n-Bu₄N)₂[(Mo₆Br ⁱ₈)(NCS)^a₆] · 2Et₂O ( 2 ) (monoclinic, spacegroup P2₁/n, a = 11.483(3), b = 16.348(5), c = 20.059(6) Å, β= 95.44(3)°, Z = 2) have been performed. The via C coordinated cyano ligands of ( 1 ) reveal facial groups with (MoCN) angles of 168.0–171,5° and 174.1°–175.7°. In ( 2 ) the via N coordinated isothiocyanato groups at the apical positions show MoNC-angles of 164.4°, the equatorial angles are 172.7–173.5°. Using the molecular parameters of the X-ray determinations the 10 K IR and Raman spectra of the (n-Bu₄N) cluster salts are assigned by normal coordinate analyses based on a modified valence force field. The valence force constants are f_d(MoMo) = 1.41 (CN^a), 1.43 (NCS^a), f_d (MoBrⁱ) = 0.97 (CN^a), 0.96 (NCS^a), f_d(MoC) = 1.62, f_d(Mo-N) = 2.09 mdyne/Å.     

Darstellung,Kristallstruktur und spektroskopische Eigenschaften der Clusteranionen [(Mo6Br)X]2− mit Xa = F,Cl, Br,I

Synthesis, Crystal Structure and Spectroscopic Properties of the Cluster Anions [(Mo₆Br )X ]^2? with X^a = F, Cl, Br, I The tetrabutylammonium (TBA), tetraphenylphosphonium (TPP) and tetraphenylarsonium (TPAs) salts of the octa-μ₃-bromo-hexahalogeno-octahedro-hexamolybdate(2?) anions [(Mo₆Br)X]^2? (X^a = F, Cl, Br, I) are synthesized from solutions of the free acids H₂[(Mo₆Br)X] · 8 H₂O with X^a = Cl, Br, I. The crystal structures show systematic stretchings in the Mo? Mo bond length and a slight compression of the Brⁱ₈ cube in the F^a to I^a series. The cations do not change much. The i.r. and Raman spectra show at 10 K almost constant frequencies of the (Mo₆Brⁱ₈) cluster vibrations, whereas all modes with X^a ligand contribution are characteristically shifted. The most important bands are assigned by polarization measurements and the force constants are derived from normal coordinate analysis. The ⁹⁵Mo nmr signals are shifted to lower field with increasing electronegativity of the X^a ligands. The fluorine compound shows a sharp ¹⁹F nmr singlet at ?184.5 ppm.     

The effects of thermal treatment on the antioxidant activity of polyaniline

The thermal stability of chemically synthesized polyaniline (PANI) was examined, including granular (G) polyaniline powders formed conventionally in an HCl medium, and nanorod (NR) samples prepared using a falling-pH synthesis. The samples were examined before and after dedoping (dd) using thermogravimetric analysis (TGA), which showed small mass losses in the 200-300 °C temperature range, and greater mass losses due to oxidative degradation at higher temperatures. Furthermore, samples were treated thermally at 100, 125, 150, 175, 200, 250 and 300 °C for 30 min in air. SEM images did not show any pronounced effect on the morphologies of the samples from thermal treatment up to 300 °C. The ratios of the intensities (Q/B) of the predominantly quinonoid (Q) and benzenoid peaks (B) from FTIR spectroscopic analysis revealed that NR-PANI and NR-PANIdd underwent cross-linking upon thermal treatment up to 175 °C and were oxidized after treatment above 175 °C. G-PANI and G-PANIdd also underwent the same chemical changes with oxidation occurring above 200 °C. The free radical scavenging capacity of the samples was evaluated using the 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay, and was found to be independent of the spin concentrations of the samples. All samples exhibited a rapid decline in free radical scavenging capacity when exposed to temperatures above 200 °C, indicating that any polymer processing should be undertaken at temperatures less than this value to achieve high antioxidant activity.     

Darstellung von μ-Schwefeldisulfoniumsalzen [(CH3)2S?Sx?S(CH3)2]2+2A− (x = 1–3, A− = AsF6−, SbF6−, SbCl6−). Über die Analogie im Reaktionsverhalten zwischen Sulfanen und Sulfoniumsalzen

Preparation of μ-Sulfurdisulfonium Salts [(CH₃)₂S? S_x? S(CH₃)₂]²⁺2A^? (x = 1–3, A^? = AsF₆^?, SbF₆^?, SbCl₆^?). On the Analogy of the Reactivity of Sulfanes and Sulfonium Salts The preparation of the μ-sulfurdisulfonium salts [(CH₃)₂S? S_x? S(CH₃)₂]²⁺(A^?)₂ with x = 1–3 and A^? = AsF₆^?, SbF₆^?, SbCl₆^? is reported. The salts are formed by reaction of (CH₃)₂SH⁺A^? and (CH₃)₂SSH⁺A^? with SCl₂ and S₂Cl₂, resp. They are characterized by vibrational spectroscopic measurements. [(CH₃)₂S? S₂? S(CH₃)₂]²⁺(SbF₆^?)₂ crystallizes in the space group C2/c with a = 1 884.5(7) pm, b = 1 302.8(5) pm, c = 1 477.2(5) pm, β = 98.62(3)° und Z = 8.     

Synthesen und Kristallstrukturanalysen neuer zwitterionischer spirocyclischer (Ammonioorganyl)bis[vic-arendiolato(2–)]silicate: Untersuchungen zur Struktur der λ5Si-Koordinationspolyeder

Syntheses and Crystal Structure Analyses of New Zwitterionic Spirocyclic (Ammonioorganyl)bis[vic-arenediolato(2–)]silicates: Studies on the Structure of the λ⁵Si Coordination Polyhedra A new crystallographic modification ( 1-II ) of the zwitterionic λ⁵Si-spirosilicate [2-(pyrrolidinio)ethyl]bis[3,4,5,6-tetrabromobenzene-1,2-diolato(2 – )]silicate ( 1 ) was synthesized. In addition, two solvent-free crystallographic modifications ( 2-I, 2-II ) and two solvates ( 2 · Me₂CO, 2 λ MeNO₂) of the zwitterionic λ⁵Si-spirosilicate [(morpholinio)methyl]bis[2,3-naphthalenediolato(2 – )]silicate ( 2 ) were prepared. All new compounds were studied by ²⁹Si-CP/MAS NMR spectroscopy and compounds 1-II (Pna2₁), 2 · Me₂CO (P2₁/c), and 2 · MeNO₂ (P2₁/n) were structurally characterized by single-crystal X-ray diffraction.     

Nanocomposite of montmorillonite with telechelic sulfonated poly(butylene terephthalate): Effect of ionic groups on clay dispersion, mechanical and thermal properties

Telechelic ionomeric poly(butylene terephthalate) nanocomposites with organically modified clays have been prepared by the melt intercalation technique both in Brabender mixer and in twin screw-extruder. The presence of ionic groups tethered at the end of the polymer chains permits electrostatic interaction between the polymer and the surface of an organically modified clays providing a thermodynamic driving force for the dispersion of the clay platelets in the polymer matrix. The improved dispersion has been verified by TEM and XRD analyses. Nanocomposites with telechelic polymers present therefore consistently higher thermo-mechanical properties and improved thermal and hydrolytic stability respect to nanocomposites with standard PBT. Nanocomposite obtained using PBT with 3% telechelic ionic groups and with 5% of clay present a heat deflection temperature that is 48 °C higher compared to that of the commercial material. The presence of the clay also slightly increases the thermal and hydrolytic stability respect to standard PBT.     

Darstellung,Kristallstruktur und Schwingungsspektren von (n-Bu4N)2[(Mo6I)(NCS)]

Synthesis, Crystal Structure, and Vibrational Spectra of (n-Bu₄N)₂[(Mo₆I)(NCS)] By treatment of [(Mo₆I)I]^2– with (SCN)₂ in dichloromethane at –20 °C the hexaisothiocyanato cluster anion [(Mo₆I)(NCS)]^2– is formed. The X-ray structure determination of (n-Bu₄N)₂[(Mo₆I)(NCS)] · 2 Me₂CO (monoclinic, space group P2₁/c, a = 13.168(5), b = 11.964(5), c = 24.636(5) Å, β = 104.960(5)°, Z = 2) shows, that the thiocyanate groups are coordinated exclusively via N atoms with Mo–N bond lengths of 2.141–2.150 Å, Mo–N–C angles of 166–178° and N–C–S-angles of 174–180°. The vibrational spectra exhibit characteristic innerligand vibrations at 2073–2054 (ν_CN), 846–844 (ν_CS) and 480–462 cm^–1 (δ_NCS).     

X-ray, Raman and FTIRS studies of the microstructural evolution of zirconia particles caused by the thermal treatment

Genesis of the structure of zirconia particles prepared by precipitation of amorphous hydrated zirconia by ammonia from the ZrO(NO₃)₂ solution followed by a mild hydrothermal treatment (HTT) of precipitate, washing and calcination under air up to 1000 °C has been studied by X-ray diffraction (XRD), Raman and FTIRS. As revealed by FTIRS of lattice modes, the local structure of amorphous zirconia subjected to HTT is close to that in m-ZrO₂. This helps to obtain nearly single-phase monoclinic nanozirconia (particle size 5-15 nm) already after a mild calcination at 500 °C. Stability of this phase with nanoparticles sizes below the critical value determined by thermodynamic constraints is due to its excessive hydroxylation demonstrated by FTIRS. Dehydroxilation and sintering of these nanoparticles at higher (600-650 °C) temperatures of calcination leads to reappearance of the (111) “cubic” reflection in XRD patterns. Modeling of XRD patterns revealed that this phenomenon could be explained by polysynthetic (001) twinning earlier observed by HRTEM.