Yieldlike constitutive transition in shear flow of entangled polymeric fluids

We describe an unexpected constitutive transition in entangled polymer solutions. At and beyond a critical stress, the initial spatially homogeneous and well-entangled sample transforms from its entangled (coiled) state into a fully disentangled (stretched) state over a period during which the resulting shear rate increases in a spatially inhomogeneous fashion. In the mode of controlled shear rate, the sample exhibits a stress plateau over three decades. Flow birefringence and normal stress observations unravel additional features of these flow phenomena.     

Oscillating viscosity in a lyotropic lamellar phase under shear flow

We report some time-dependent behavior of lyotropic lamellar phase under shear flow. At fixed stress, near a layering instability, the system presents an oscillating shear rate. We build up a new stress versus shear rate diagram that includes temporal behavior. This diagram is made of two distinct branches of stationary states which correspond, respectively, to disordered and ordered multilamellar vesicle phases. When increasing the shear stress, prior to the transition to the ordered structural state, sustained oscillations of the viscosity are recorded. They correspond to periodic structural change of the entire sample between a disordered and a ordered state of multilamellar vesicles.     

Age-dependent transient shear banding in soft glasses

We study numerically the formation of long-lived transient shear bands during shear startup within two models of soft glasses (a simple fluidity model and an adapted "soft glassy rheology" model). The degree and duration of banding depends strongly on the applied shear rate, and on sample age before shearing. In both models the ultimate steady flow state is homogeneous at all shear rates, consistent with the underlying constitutive curve being monotonic. However, particularly in the soft glassy rheology case, the transient bands can be extremely long lived. The banding instability is neither "purely viscous" nor "purely elastic" in origin, but is closely associated with stress overshoot in startup flow.     

The synergetic theory of the glass transition in liquids

The glass transition is treated as a spontaneous emergence of the shear components of strain and stress elastic fields upon cooling a liquid at a rate exceeding the critical value. The stationary elastic strains and stresses and the effective relaxation time are determined within the adiabatic approximation. It is shown that the glass transition process occurs through the mechanism of a first-order kinetic transition with allowance made for the strain dependence of the shear modulus. The critical cooling rate turns out to be proportional to the thermal diffusivity and unrelaxed shear modulus and inversely proportional to the temperature derivative of the relaxed shear modulus and the square of the heat conductivity length of the sample.     

Ultrasonic interferometry for the measurement of shear velocity and attenuation in viscoelastic solids

A method for the measurement of the shear properties of solid viscoelastic materials is presented. The viscoelastic material is cut into a cylindrical sample which is clamped between two rods. The transmission and reflection coefficient spectra of the fundamental torsional mode through the sample are measured by means of two pairs of piezoelectric transducers placed at the free ends of the rod-sample-rod system. Such spectra exhibit maxima and minima which occur approximately at the resonance frequencies of the free viscoelastic cylinder. Therefore, the shear velocity can be obtained by measuring the frequency interval between two consecutive maxima or minima. The shear attenuation is derived by best fitting the analytical expression of the reflection and transmission coefficients to the experimental spectra. The test is very quick to set up as the sample is simply clamped between the two rods.     

Shear modulus of polydomain, mono-domain and non-mesomorphic side-chain elastomers: Influence of the nematic order

We investigate the behavior of the complex shear modulus of a series of elastomers including mono-domain and poly-domain liquid crystal samples, and a non-mesomorphic sample. We find that the dynamics of the glass transition are strongly modified by the nematic order. This result explains why the truly elastic response of liquid crystal elastomers can only be observed in the isotropic phase at very high temperatures and at very low frequencies. Between the elastic regime and the glassy state, the elastomers have a visco-elastic regime, which is characterized by a Rouse-like behavior for mono-domain and poly-domain samples, and by a Zimm-like behavior for the non-mesomorphic sample. We also show that the mono-domain sample exhibits marked anisotropy of the shear-modulus G ^′. This anisotropy, which is observed for the first time, is a function of frequency and is inverted between low and high frequencies, due to relaxation effects of the orientational order. Received 28 January 2000 and Received in final form 16 October 2000     

Effects of charge-density-wave depinning on the low frequency shear compliance of NbSe3

We report on measurements of the voltage dependence of the complex shear compliance of two crystals of the charge-density-wave (CDW) conductor NbSe₃, for torsional frequencies between 1 Hz and 71 Hz. For both samples, there is a frequency independent, ∼1% increase of the magnitude of the compliance when the voltage exceeds the threshold for CDW depinning, but the internal friction has a striking sample dependence which we do not understand. For one sample, there is a frequency independent decrease in internal friction with CDW depinning, suggesting that the elastic changes are not relaxational and might reflect changes in the screening of the crystal strain by the CDW. For the second sample, the sign and magnitude of the change in internal friction is strongly frequency dependent, which we associate with a change in screening due to the finite electron diffusion time. The second sample also exhibits a frequency dependent peak in internal friction near threshold that may reflect relaxation of the CDW phase. Received 14 August 2001 and Received in final form 3 October 2001     

Influence of cold rolling on the anisotropy of the shear modulus and the poisson coefficient of polycrystalline copper and silicon steel

We consider a method for calculating the anisotropy of the shear modulus and the Poisson coefficient in the rolling plane for textured polycrystalline materials with a cubic lattice, which makes use of the integrated texture characteristics for averaging over the single-crystal properties, which are a certain combination of direction cosines in the sample coordinates, averaged with respect to orientation. The integrated texture characteristics are determined from two experimentally opposite polar figures of the plates. We study the influence of the amount of deformation during cold rolling on the anisotropy of the plate properties listed above for copper and silicon steel. The accuracy in the calculations is better than 5%. The results are compared with data from other authors. K. D. Ushinskii Institute, Odessa. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 2, pp. 25–29, February, 1993.     

Slow nonlinearity kinetics of the viscoelastic properties of oil during shear vibrations

Earlier we discovered the slow evolution of viscoelastic moduli of heavy crude oil. The shear modulus was measured at frequencies of 0.5, 5, and 50 Hz at different temperatures over 72 h. New studies of the dependence of the complex shear modulus on the strain amplitude revealed a logarithmic increase in the nonlinearity parameter as a function of time for this oil sample. It was experimentally established that the complex shear modulus is a linear function of the amplitude of shear perturbations. This is possible in the case of a linear dependence of values of the viscoelastic characteristics on the medium modulus of deformation.     

Correlation between the viscoelastic properties of a soft crystal and its microstructure

We investigate the rheological properties of a cubic fcc phase of micelles obtained by aggregation of a triblock copolymer (PEO)₁₂₇(PPO)₄₈(PEO)₁₂₇ in water as selective solvent. The resulting soft solid is submitted to a range of stresses varying from 20 to 800Pa in Couette geometry. Creep and flow behaviour can be distinguished and interpreted in terms of structural changes previously observed by SAXS under flow. Contrasting with other systems, no discontinuity in the flow behaviour is associated with the structural changes. The strong shear thinning is interpreted from the scattering data, as resulting from the nucleation of a new structure of hexagonal compact planes parallel to the Couette walls. This creates a lubricating domain in the gap, whose size grows with the applied shear rate. We argue moreover that the very existence of flow (as a steady state opposed to creep) is associated with this so-called layer-sliding structure in a fraction, however small, of the sample. Received on 4 June 1999 and Received in final form 6 September 1999     

Heterogeneity and the role of normal stresses during the extensional thinning of non-Brownian shear-thickening fluids

We contrast the extensional and shear dynamics of non-Brownian suspensions as a function of particle concentration. We show that the thinning rate selected during the viscoelastic pinch-off of a liquid bridge is related to the shear rate at which normal stresses become positive, which differs from the shear rate at the onset of shear thickening. By tracking particles, we demonstrate that the extensional flow is heterogeneous, with local variations of the volume fraction consistent with self-dilution. This nonuniform structure is the cause of the buckling of the threads formed after breakup.     

Increase in the efficiency of the shear wave generation in gelatin due to the nonlinear absorption of a focused ultrasonic beam

Experimental results and theoretical estimates are presented to demonstrate the prospects of using the acoustic nonlinearity of a gel-like medium for increasing the efficiency of the shear wave generation in it by a pulsed ultrasonic beam. The experiment is based on the propagation of a focused beam of longitudinal acoustic waves at a frequency of 1.1 MHz in a gelatin sample and on the detection of shear waves by the optical method [1]. It is demonstrated that the amplitude of the shear wave excited by a nonlinear acoustic pulse can be increased by an order of magnitude owing to the formation of shock fronts in the profile of this pulse.     

Shear modulation force microscopy study of near surface glass transition temperatures

We report results of glass transition (T(g)) measurements for polymer thin films using atomic force microscopy (AFM). The AFM mode, shear modulation force microscopy (SMFM), involves measuring the temperature-dependent shear force on a tip modulated parallel to the sample surface. Using this method we have measured the surface T(g) of thin (17-500 nm) polymer films and found that T(g) is independent of film thickness (t>17 nm), strength of substrate interactions, or even presence of substrate.     

Phase field modeling precipitation of β-phase and mechanical properties change in Zr–Nb alloys under neutron irradiation

ABSTRACT

We study microstructure transformation in Zr–Nb system under neutron irradiation and its mechanical properties change under mechanical loads in a form of shear deformation by using phase field methodology. The developed phase field approach takes into account defects dynamics based on reaction rate theory and elastic contribution to study mechanical properties change. A numerical modeling is provided in three stages: sample preparation, irradiation of the prepared sample and mechanical loading of the irradiated sample. A precipitation of β-Niobium particles of the size of several nanometers is discussed. Results of phase field modeling indicate that β-Niobium particles grow slowly during irradiation due to point defects rearrangement. Statistical analysis of dynamics of radiation-induced microstructure transformations is provided. Simulation results of shear deformation of pre-irradiated and post-irradiated alloys are discussed. Maps of local distribution of strain and stress and strain–stress curves are obtained. Results are verified with experimental data.     

Temporal oscillations of the shear stress and scattered light in a shear-banding-shear-thickening micellar solution

The results of optical and rheological experiments performed on a viscoelastic solution (cetyltrimethylammonium bromide + sodium salicylate in water) are reported. The flow curve has a horizontal plateau extending between two critical shear rates characteristic of heterogeneous flows formed by two layers of fluid with different viscosities. These two bands which also have different optical anisotropy are clearly seen by direct observation in polarized light. At the end of the plateau, apparent shear thickening is observed in a narrow range of shear rates; in phase oscillations of the shear stress and of the first normal stress difference are recorded in a shearing device operating under controlled strain. The direct observation of the annular gap of a Couette cell in a direction perpendicular to a plane containing the vorticity shows that the turbidity of the whole sample also undergoes time dependent variations with the same period as the shear stress. However no banding is observed during the oscillations and the flow remains homogeneous.     

Steady low shear rate cholesteric flow normal to the helical axis

Steady cholesteric flow at low shear rate normal to the helical axis is studied analytically for shear flow and plane Poiseuille flow on the basis of Leslie’s continuum theory. For general asymmetric solutions the angle made by the director at the sample centre with the primary flow is found to profoundly affect the oscillations of the apparent viscosity with pitch for pitches of the order of the sample thickness. The velocity and orientation profiles are also found to change drastically. These considerations may be important in flow experiments on long pitch cholesterics.     

Measurement of shear elasticity and viscosity of rubberlike materials

The method and results of measuring the shear elastic modulus of a rubberlike polymer by the deformation of a plane elastic layer are described. For shear deformations not exceeding 0.5 of the layer thickness, the shear modulus is constant and its value is in agreement with the value determined by pressing a rigid ball against the polymer layer. For deformations exceeding 0.5 of the layer thickness, the stress-strain dependence becomes nonlinear. The coefficient of shear viscosity is determined from the shear wave form generated by focused ultrasound in a homogeneous polymer sample.     

On the effect of an applied magnetic field on the shear-induced pattern formation in nematic polymer liquid crystals

The effect of an applied magnetic field and of the boundaries on the stability of the shear flow of nematic polymer liquid crystals of the tumbling type with respect to the formation of the transient spatially periodic patterns that appears after the start-up of shearing is studied. The unidirectional shear of a nematic director initially uniformly oriented orthogonally to the sample plane and with strong anchoring is considered. The magnetic field is applied orthogonally to the sample plane or in the same direction of the flow. For a given value of the Ericksen number of the flow a critical value of the magnetic-to-viscous energy ratio shows up above which the uniform flow is stable. When the influence of the boundaries may be neglected, an internal Ericksen number that stays constant in a given material is considered such that the wavelength of the periodic pattern is a self-adjusted length. An internal generalized Ericksen number is defined such that it is a universal function of the magnetic-to-viscous energy ratio.To the memory of my mother     

Coherent shear phonon generation and detection with ultrashort optical pulses

Using an optical technique we generate and detect picosecond shear and quasishear coherent acoustic phonon pulses in the time domain. Thermoelastic and piezoelectric generation are directly achieved by breaking the sample lateral symmetry using crystalline anisotropy. We demonstrate efficient detection in isotropic and anisotropic media with various optical incidence geometries.