三检测体积排除色谱表征聚合物支化结构

以α-溴代异丁酸叔丁酯(t-BBiB)为引发剂,CuBr/联二吡啶为催化体系,二乙烯苯(DVB)为支化单体,采用原子转移自由基聚合反应(ATRP)经过一步加料方法和先臂后核方法分别合成不同支化结构类型的支化聚合物,同时以四官能度引发剂经ATRP合成臂数确定的星形聚合物为参照。采用三检测体积排除色谱(TD-SEC)得到Zimm相对支化因子g′与g和表征聚合物支化结构类型的指数因子ε(g′=gε)。结果表明:随支化结构类型的不同,支化结构指数因子ε表现出不同的分子量依赖特性。星状支化聚合物的ε平均值<1,而且随分子量的变化保持相对恒定;无规支化聚合物的ε平均值>1,而且其值随分子量的增加不断减小。因此,可以由三检测体积排除色谱进行分析确证聚合物的支化结构类型。     

长链支化聚乳酸的多重松弛行为

在辐照法制备长链支化聚乳酸(LCB-PLA)的基础上,采用凝胶渗透色谱-多角度激光光散射联用(SEC-MALLS)表征了LCB-PLA的支化结构,利用动态流变学方法考察了PLA的黏弹松弛行为,计算得到了线型及支化PLA在较宽时间范围内完整的加权松弛时间谱.结果表明,由于长支链的引入及支链长度的增加,导致LCB-PLA松弛时间谱加宽,松弛时间增长,并呈现多重松弛行为.提出了一种计算长链支化聚合物支链长度的方法,可以定量表征LCB-PLA的支链长度以及长支链的分子量.     

双烯化合物类单体合成支化聚合物的支化结构的研究

分别以二乙烯基苯(DVB)、双甲基丙烯酸二缩三乙二醇酯(tri-EGDMA)和1,6-双马来酰亚胺基正己烷(BMIH)为支化单体,采用原子转移自由基聚合合成支化聚苯乙烯;以先核后臂法合成的星状支化聚苯乙烯为参照对合成的支化聚合物的支化形态进行研究.采用气相色谱(GC)、核磁共振氢谱(1H-NMR)和三检测凝胶渗透色谱(TD-SEC)测定了苯乙烯的转化率,聚合物分子量及其分布,特性黏数和均方回转半径.实验结果表明3个支化聚合反应体系内悬垂双键是逐步消耗的,不存在明显的成核过程.反应前期,以形成带有悬垂双键的初级链和轻度支化聚合物为主,聚合物分子量随单体转化率逐步上升;反应后期,悬垂双键聚合导致的分子之间的偶合更加明显,使得聚合物分子量快速上升,合成得到的都是无规支化聚合物.     

单体慢加入技术对超支化聚合物分子参数的影响

详细分析了单体慢加入到多官能度核分子中制备超支化聚合物的动力学过程,以单体转化率为参数导出了产物的聚合度分布函数、平均聚合度、多分散性指标和支化度等分子参数的解析式,计算结果与文献报道的实验数据十分一致.分子参数依赖于核的官能度(f)、核分数(α)和单体转化率(x),这为通过聚合反应条件来进行分子结构的设计提供了理论依据.与一步聚合方法的产物相比,单体慢加入技术能够改进产物的分子量分布,提高其支化度.     

聚乙酸乙烯酯的溶液性质及长链支化度

用粘度法,GPC和LALLS测定了线型及不同转化率的PVAc分级级份的粘度与分子量。提出了以线型和支化聚合物的K,α计算临界分子量的方法。讨论了表征PVAc长链支化的各种参数与分子量和转化率之间的关系以及不同条件下迭代法计算的支化频率λ的差异。实验结果表明,特性粘数和数均分子量乘积所表示的流体力学体积更适合GPC的普适标定概念。     

用GPC-级分特性粘数法表征高顺式-1,4聚丁二烯的长链支化

本文在Ambler方法和kraus方法的基础上,用GPC-级分特性粘数法来测定聚合物的长链支化度,能同时以g_i、λ_i、G_i、m_i、支化重量百分数等支化参数来表征聚合物的支化分布、支化程度和支化含量等;得到了相应的计算gi、λi、[η]_i等有关的计算公式和计算方法;还研制成了以光导纤维为冷光源的高精度光电自动计时毛细管粘度计和60小时内恒温精度优于±5×10~(-4)℃的超级恒温水浴,使计时精度达到≤±4×10~(-3)秒;并以国产和进口的镍系顺丁橡胶为例,讨论了分子量和支化度多分散性之间的某些关系;从而确定了该法比较合理地、全面地相对比较聚合物的长链支化度。     

用凝胶色谱与毛细管粘度计联用法研究顺丁胶的长链支化

本文讨论了用GPC与自动粘度计联用技术测定高聚物长链支化度的方法,将得到的实测关系[η](V)转化成校准关系[η](V_R)后,利用在同一淋出体积流出支化物和线型分子的([η]·M)乘积相等这一普遍原理,计算出各级分的支化因子g_i、总平均支化因子以及产生支化的临界分子量M~*,并讨论了检测器与粘度计连结管死体积△V及虹吸管残留液对支化参数计算值的影响。     

顺丁橡胶分子结构参数对其浓溶液流变性质的影响

对顺丁橡胶浓溶液作了较为深入的研究,主要讨论了分子量分布和支化因子与顺丁橡胶浓溶液流动行为的关系。用倒沉淀分级的方法进行了大量分级,得到分子量分布较窄的试样;对这些试样用GPC-自动粘度计联用的方法测定了分子量、分子量分布和支化因子,同时用同轴圆筒式粘度计及落球方法测定了这些试样的浓溶液粘度。     

链转移剂单体存在下苯乙烯乳液聚合反应研究

以α-甲基丙烯酸-3-巯基己酯(MHM)为链转移剂单体,过硫酸钾(KPS)为引发剂,十二烷基苯磺酸钠(LAS)为乳化剂,通过乳液聚合合成支化聚苯乙烯(BPSt).采用1H-NMR和三检测体积排除色谱(TD-SEC)对聚合反应过程和合成的聚合物进行了表征分析.结果表明,在合适的乳化剂用量、引发剂用量和聚合反应温度等条件下,反应初期生成的初级链可以完全转化成支化聚合物,在高单体转化率下不发生交联得到较窄分子量分布的高分子量支化聚苯乙烯(Mn,SEC1.4×105,Mw,MALLS2.0×106,PDI4.5),而且所得聚合物表现出很高的支化程度(g'=0.5~0.6).     

醋酸乙烯酯的辐射乳液聚合

本文研究了各种因素对醋酸乙烯酯(VAc)辐射乳液聚合反应速度、胶乳粒子数、分子量、分子量分布及支化度的影响,在Friis导出的VAc化学引发乳液聚合的动力学和分子量公式的基础上,修改了K′_α等参数表达式,对VAc辐射乳液聚合曲线、分子量等随转化率变化的曲线作了理论计算,与实验结果较吻合。     

CHARACTERIZATION OF BRANCHING POINT DISTRIBUTION IN THE SOL OF IRRADIATED POLYSTYRENE WITH SEC-LALLS

In this paper, the change behavior of branching point distribution of irradiated polystyrene in sol has been first studied by the SEC-LALLS method. The experimental results show that branching parameter of the part with lower molecular weight in the sol changes little at the early stage of irradiation and that of the part with the higher molecular weight becomes greater with the increase in radiation dose.     

茂金属聚乙烯的非等温结晶行为及其动力学研究

为探索分子量和支链含量对聚乙烯非等温结晶过程的影响,选用3组样品:(1)不同分子量的无支链线形聚乙烯;(2)低分子量的支链含量不同的试样;(3)高分子量的支链含量不同的试样.用DSC研究了这3组样品的非等温结晶动力学.结果表明:(1)与支链含量相比,分子量大小对结晶的影响是次要的,但高分子量样品的结晶度比低分子量样品低;(2)支链对聚乙烯的非等温结晶有重要影响,在支化聚乙烯中起决定作用;(3)无论是高分子量试样还是低分子量试样,支化含量增加,聚乙烯的结晶温度、结晶度、结晶动力学以及晶体的熔点等显著降低.     

Inter and intra-molecular branching distribution of tailored LLDPEs inferred by melting and crystallization behavior of narrow fractions

Here we report the melting and isothermal crystallization behavior of two sets of fractions obtained from a film-grade metallocene catalyzed ethylene-1-hexene resin with enhanced mechanical properties. One set of fractions was obtained by molecular weight fractionation, the second set was obtained fractionating by content of 1-hexene. The melting behavior, crystallization kinetics and supermolecular morphology of the fractions are analyzed in reference to the behavior of model systems with uniform inter-chain branching content and a random intra-chain distribution. While melting and crystallization kinetics of molecular weight fractions conforms to the bivariate (molecular weight-comonomer content) distribution of the original copolymer, the behavior of 1-hexene compositional fractions indicate a blockier branching distribution in the highly branched high molar mass fractions. Major differences with model random copolymers are also observed in the supermolecular morphology of the latter fractions.     

GPC-VIS-MALS study of EVA copolymers: Quantification and interactions of SCB and LCB

Long-chain branching (LCB) is a structural phenomenon that affects important properties in polyethylene (PE) and some copolymers. Quantification of LCB frequency (λ) can be carried out by gel permeation chromatography dotted with detector for viscosity (GPC-VIS) or light scattering (GPC-MALS) by calculating branching indexes against a linear reference. In copolymers, interactions between LCB and SCB (short chain branching) have been described and lead to errors in quantification.In this work, ethyl vinyl acetate (EVA) copolymers of composition ranging 3–20 wt% VA have been studied. A numerical method, developed for the reduction of GPC-VIS and GPC-MALS data of PE, was used for quantifying molecular weights, intrinsic viscosities and gyration radius, as well as the confident ranges. Reliable results were obtained despite the low LCB determined values.A low density polyethylene was also included and compared. Discrepancies in the scaling laws for gyration radius and intrinsic viscosity reveal a strong effect of SCB which was confirmed by the structure factor and its dependence on molecular weight and comonomer content. However, the recently designed gpcBR index revealed to be nearly independent on the short chain branching and allowed detecting differences between apparently similar samples.     

INFLUENCES OF MOLECULAR WEIGHT AND BRANCHING PARAMETER OF LACQUER POLYSACCHARIDE ON THE GROWTH OF LEUCOCYTES

A method of determining branching parameter of lacquer polysaccharide wasestablished by acid-base back-titration of terminal uronic acid of branches. The branchingfactors obtained are in agreement with the values determined by colorimetric method withcarbazole and the results estimated by using Zimm-Stockmayer equation from viscositydata. Influences of molecular weights and branching factors of five fractions of lacquerpolysaccharide on the bioactivities were studied. The results show that the polysaccharideshave bioactivities in motivating the growth of leucocytes, and the effect increases with thedecrease of molecular weight and branching factor in the range studied (17×10~4 >M_w>4×10~4).     

STUDY ON LONG CHAIN BRANCHING IN POLYBUTADIENES BY GPC COUPLED WITH CAPILLARY VISCOMETER

The long chain branching of polybutadienes (PB) was measured with gel permeation chroma-tography coupled to an automatically recording capillary viscometer. In this method the experimentalrelation [η] (V) was translated into the calibration curve [η] (V_R) for the monodisperse species. The curve is combined with the universal calibration so that the molecular weight distributionand an additional parameter, e.g. the average branching factor of this samples may be obtained. Longchain branching molecular weight changes with polyemerization conditions.     

Theoretical Studies of O(1D)+HD (v=0, j=0, 1, 2, 3)→OD(H)+H(D) Reaction

The quasi-classical trajectory calculation for the reaction O(¹D)+HD is carried out based on the Dobbyn and Knowles potential energy surface. In this work, the reaction cross section and product branching ratio are obtained. The product branching ratio OD/OH was discussed. The calculated results show that the cross-section decreases thoroughly with the increasing of the collision energy from 4.6 kJ/mol to 46.0 kJ/mol. The average branching ratio decrease with the increase of rotational quantum number of reactant HD.     

Random cross-linked poly(styrene-co-maleic anhydride): Characterization of cross-linking intermediates by size exclusion chromatography

The cross-linking reaction of poly(styrene-co-maleic anhydride) (SMA) with ethylene glycol (EG) was monitored using size exclusion chromatography. On-line viscosity and static light scattering detection provided [η] and R_g for structural analysis of the cross-linking intermediates. With increasing reaction time a decrease of the expansion exponent α of the Kuhn-Mark-Houwink-Sakurada relationship was observed. A change from coiled structures to spherical molecules during the cross-linking reaction was confirmed by analyzing the fractal dimensions of the molecules after different reaction times. The calculation of the branching parameters g and g′ revealed the formation of contracted branched molecules. The connection of SMA chains by EG leads to a contraction of the polymers with increasing molecular weight.