尿素法合成高结晶度类水滑石

尿素的高温分解特性被用于控制层状化合物合成过程中的pH值。室温下尿素可与硝酸盐形成均一溶液，当其高温分解时可以保证溶液内部各点的pH值始终一致，因而可获得高结晶度的水滑石样品。利用该法可合成出Mg-Al、Zn-Al及Ni-Al类水滑石，但难以合成出Co-Al，Mn-Al及Co-Cr类水滑石，相信这与不同金属离子发生沉淀时所需的pH值有关。     

Urea Decomposition Method to Synthesize Hydrotalcites

The urea decomposition property at high temperature has been used to control the pH value in the synthesis of layer compounds. The hydrotalcites of Mg-Al and Ni-Al with high crystallinity were synthesized by using this property.     

尿素水解法制备晶须碳酸钙

采用尿素水解法合成了晶须碳酸钙,研究了原料配比、反应时间等合成条件对晶须产率的影响,采用SEM、TG和X-射线衍射技术等方法对晶须进行了表征。结果表明,本方法体系简单,条件易于控制,且随尿素比例的增加、反应时间的延长,晶须的产率得以提高。     

脲和盐酸胍诱导过氧化氢酶去折叠的研究

用荧光相图法分别研究了脲和盐酸胍诱导牛肝过氧化氢酶去折叠的过程。当脲 浓度从0依次增大至0.50,4.5和8.0 mol/L时,过氧化氢酶从天然四聚体依次转变 为蓬松的四聚体、部分折叠的无活性二聚体和去折叠态,而当盐酸胍浓度从0依次 变化至0.65,2.5和6.0 mol/L时,过氧化氢酶则从天然四聚体集资转变为部分折叠 的激活二聚体、部分折叠的单体和去折叠态,这表明无论是用脲还是用盐酸胍作为 变性剂,该蛋白的变性过程都符合“四态模型”,但这两种变性剂诱导该蛋白去折 叠的途径和机制有较大差异。实验结果表明荧光相图法可以检测蛋白质去折叠的中 间态。用等温滴定量去热法研究了盐酸胍诱导过氧化氢酶去折叠过程的热力学, 25.0 ℃时低浓度盐酸胍诱导该蛋白从天然四聚体转变为部分折叠的激活二聚体的 本征摩尔构象变化焓、Gibbs自由能和熵分别为-69.2 kJ·mol~(-1),6.43 kJ· mol~(-1)和-254 J·K~(-1)·mol~(-1),据此推断盐酸胍通过熵效应和静电效应来 稳定和激活该二聚体。     

刀豆组织电极用于脲测定的研究

关于生物组织传感器的研究,Arnold有详细综述。刀豆中包含丰富的脲酶,本文报道将刀豆切片与自制石墨内导PVC膜pH电极型氨气敏电极偶合制成了刀豆切片脲电极,对其响应特性、介质条件、固定化及切片厚度等因素进行了研究,取得了较满意的结果。     

Study on Sythesis of Crosslinked Chitosan Prolymer and Its Use in the Removal of Urea

ＳｔｕｄｙｏｎＳｙｔｈｅｓｉｓｏｆＣｒｏｓｓｌｉｎｋｅｄＣｈｉｔｏｓａｎＰｒｏｌｙｍｅｒａｎｄ　Ｉｔｓ　Ｕｓｅｉｎ　ｔｈｅＲｅｍｏｖａｌｏｆＵｒｅａＺｈａｎｇＹｕｅｈｕａ；ＺｈａｎｇＹａｎ；ＨｅＢｉｎｇｌｉｎ（ＩｎｓｔｉｔｕｔｅｏｆＰｏｌｙｍｅｒＣｈ...     

尿素醇解法合成碳酸二甲酯的研究进展

综述了尿素醇解法合成碳酸二甲酯的工艺研究中有关反应的热力学及相应的催化剂研究进展,归纳了工艺研究中所采用的实验装置的主要类型。分析了该工艺研究目前存在的主要问题,提出了设计融熔尿素醇解工艺和采用氨基钠作为催化剂的构想。     

A Urea Electrode Based on the Ammonia Probe

Abstract

An enzyme electrode specific for the substrate urea is described. The electrode consists of a layer of urease polymerized directly on to the surface of the gas diffusion membrane of an ammonia probe by means of glutaraldehyde. The calibration curves obtained when the electrode is allowed to measure in buffered solutions are discussed in terms of enzyme activity and pH-gradients in the membrane.     

Long Afterglow Room‐Temperature Phosphorescence from Nanopebbles: A Urea Pyrolysis Product

Materials having long afterglow are highly sought after for various applications such as light‐emitting diodes, security signs and bioimaging. Herein, we report a simple, low‐cost synthesis of a purely organic room‐temperature phosphorescent nanomaterial with a pebble‐like structure by heating urea, a biocompatible and easily available precursor, at 200 °C with a high phosphorescence lifetime of 1.0365 s and a visible afterglow for up to 10 s. This urea derived phosphorescent nanocomposite (UPNC) can be mixed with commercially available acrylic paint base and common gum, which can be readily used as a phosphorescent pigment.     

Stabilization of Sensing Assay within Polyelectrolyte-Coated Alginate Microspheres for Optical Urea Sensing

Abstract

A new absorbance-based enzymatic biosensor for determination of urea (in the range 0.01 to 6.7 mM) is described. Quantification using cresol red dye, immobilized in the nanofilm coatings assembled on alginate microspheres to immobilize the urease enzyme, has been accomplished using ratiometric absorbance measurements. The effect of salt concentration in polyelectrolyte nanofilms (on the stability of dye molecules) and buffer pH (on the enzyme stability) are reported. The results demonstrate excellent stability of sensing assay within alginate microspheres. Urea-sensing experiments demonstrate the potential to develop an optical urea sensor that is stable over a month.     

脲和盐酸胍诱导溶菌酶去折叠的荧光相图法研究

用荧光相图法分别研究了脲和盐酸胍诱导卵清溶菌酶去抓叠的过程。当变性体 系中无还原剂2－巯基乙醇存在、脲浓度从0变化至4.0 mol/L（或盐酸胍浓度从0变 化至3.0 mol/L）时,溶菌酶从天然态转变为部分折叠中间态,当脲浓度从4.0 mol/L变化至8.0 mol/L（或盐酸胍浓度从3.0 mol/L变化至6.0 mol/L）时,溶菌 酶从中间态转变为去折叠态,此时该蛋白的变性过程符合“三态模型”。而当变性 体系中有该还原剂存在时,溶菌酶则由天然态直接转变为去折叠态,此时脲诱导该 蛋白去折叠的过程符合曲型的“二态模型”。实难结果表明荧光相图法可以检测蛋 白南去抓叠的中间态。     

有机脲类快速固化环氧粉末涂料的研究

有机脲类化合物一般作为一种有效固化促进剂使用。但作者经大量的实验得出,有机脲类可以单独作为一种优良的快速固化剂,其固化速度快,并且有优良的附着性能。研究结果表明,有机脲类化合物ND作为快速潜伏性环氧树脂固化剂,在环氧粉末涂料中加入4%时,固化温度为180℃,粉料55秒可以完全固化。     

以尿素为氮源制备氮改性二氧化钛及其改性机理

以钛酸丁酯为前驱体,以尿素为氮源,采用改进溶胶-凝胶法制备了不同N含量的改性TiO2光催化剂(N-TiO2).以重铬酸钾为目标污染物,以甲酸为空穴捕获剂,评价了可见光下该催化剂的催化还原活性.结果表明,N-TiO2催化剂活性明显高于未改性催化剂,当催化剂中N/Ti摩尔比为10%、焙烧温度为400℃时,其光催化还原活性最...     

Colorimetric Determination of Microgram Quantities of Urea

Abstract

A sensitive colorimetric method of determining urea is described. It involves measurement of the absorbance of the red color formed when urea is heated with diacetyl monoxime and thiosemicarbazide under acidic conditions (phosphoric acid-sulfuric acid medium). The method is accurate and precise, and it permits determination of microgram amounts of urea in the presence of ammonium, nitrate, amino acids, amides, and amino sugars.     

A Ninhydrin‐Type Urea Sorbent for the Development of a Wearable Artificial Kidney

The aim of this study is to develop polymeric chemisorbents with a high density of ninhydrin groups, able to covalently bind urea under physiological conditions and thus potentially suitable for use in a wearable artificial kidney. Macroporous beads are prepared by suspension polymerization of 5‐vinyl‐1‐indanone (vinylindanone) using a 90:10 (v/v) mixture of toluene and nitrobenzene as a porogen. The indanone groups are subsequently oxidized in a one‐step procedure into ninhydrin groups. Their urea absorption kinetics are evaluated under both static and dynamic conditions at 37 °C in simulated dialysate (urea in phosphate buffered saline). Under static conditions and at a 1:1 molar ratio of ninhydrin: urea the sorbent beads remove ≈0.6–0.7 mmol g^?1 and under dynamic conditions and at a 2:1 molar excess of ninhydrin ≈0.6 mmol urea g^?1 sorbent in 8 h at 37 °C, which is a step toward a wearable artificial kidney.     

手性不对称脲氨基醇的合成

L-氨基酸甲酯盐酸盐与三光气和苯胺反应合成了手性不对称脲氨基酸甲酯(2),2经NaBH4还原得到8个手性不对称脲氨基醇,其结构经1H NMR,IR和MS确证。     

ZnCl＿2－尿素熔体的电化学研究

研究了温度、浓度对ＺｎＣｌ２－尿素熔体电导的影响,ＺｎＣｌ２－ＮａＣｌ－尿素熔体的电导率（１２５℃）可达３０ｍｓ·ｃｍ－１以上．用循环伏安曲线、恒电位电解及断电后的电位－时间曲线,研究尿素熔体中Ｚｎ２＋的电还原和锌在钛、铜电极上的电沉积．Ｚｎ２＋的电还原为一步可逆过程,锌沉积在铜电极上会形成ＣｕＺｎ５合金．Ｚｎ２＋在熔体中扩散系数为１．３×１０－６ｃｍ２·ｓ－１（１２５℃）     

尿素催化的高效绿色Knoevenagel缩合反应

An efficient and green procedure for the urea catalyzed Knoevenagel condensation was developed. In the presence of a catalytic ammount of urea, stoichiometric aldehyde and active methylene compound reacted under sol-vent-free conditions at 100℃ for 5-60 min to give nearly quantitative yield of product.     

氨基酸从水到尿素水溶液中的迁移焓研究

用微量量热法测定甘氨酸、L-丙氨酸、L-丝氨酸在水和尿素水溶液中的溶解焓, 计算得到氨基酸从水到尿素水溶液的迁移焓, 并根据水合结构相互作用模型予以讨论. 结果表明, 氨基酸两性离子与尿素分子的静电作用以及两性离子头部与尿素分子的结构相互作用对氨基酸迁移焓有负贡献, 氨基酸侧链与尿素分子的结构相互作用依其亲水性或疏水性分别对迁移焓有负贡献或正贡献. 在实验浓度范围(0～13 mol/kg)内, 三种氨基酸的迁移焓总体上随尿素浓度的增加而下降, 其大小依次为L-丝氨酸＜甘氨酸＜L-丙氨酸, 氨基酸迁移焓的差异反映了溶质-溶剂结构相互作用的变化.