等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

THE SEPARATION,PURIFICATION AND DECOLORIZATION OF NEW ANTIBIOTICS-MILUPEINAN USING ADSORPTION RESIN

1. INTRODUCTION Fig.1 The Chemical Structure of Milupeinan As a new type of antibiotics Milupeinan, not only possesses antibacterial activities against a wide range of Gram-positive and Gram-negative bacteria, but also higgh stability under th…     

树脂法分离纯化米洛培南

采用国产AAS大孔吸附树脂及D－280大孔脱色树脂对抗生素米洛培南制备母液进行分离纯化。实验表明，与日本Diaion公司生产的Diaion CHP20相比，AAS大孔吸附树脂对米洛培南具有更优良的吸附性能，使用D－280大孔脱色树脂对抗生素米洛培南制备母液进行脱色，未发现类似报道，分析结果证实，以上述方法制备的抗生素米洛培南收率高，纯度高，各项分析数据与文献报道相符。     

Study on Adsorption and Separation of Naringin with Macroporous Resin

X-5 resin, with higher adsorption and easier desorption of naringin, was selected from five kinds of macroporous resins through static adsorption and desorption experiments. Effects of concentration, pH value, and flow rate of naringin extract on the adsorption of naringin by X-5 resin were studied. Meanwhile, the effect of these factors on the desorption of naringin from X-5 resin was also investigated. The experimental results show that the adsorption isotherm of naringin by X-5 resin can be described by the Langmuir isotherm equation. The static maximum adsorption capacity of naringin is 32.6 mg/g with naringin concentration at 2.7 g/L, while the dynamic adsorption capacity of naringin is 23.8 mg/g with naringin extract flow rate at two times that of resin volume per hour. The optimal eluant is 60% (v/v) ethanol-water with pH value of 10. The desorption ratio will rise to more than 85% when the flow rate of this optimal eluant is one to two times that of resin volume per hour. Translated from Journal of Central South University (Science and Technology)     

大孔吸附树脂分离纯化异甘草素的研究

研究大孔吸附树脂分离纯化异甘草素的工艺条件及参数。通过研究HPD-600、D4020、D101、AB-8、NKA-II、AL-2和NKA-9树脂对异甘草素的吸附和解吸附能力,筛选最佳树脂为AB-8,并研究了其对异甘草素的吸附和解吸附性能,确定了最佳的吸附与解吸附工艺参数,吸附:pH=5,室温,流速1.5BV/h,溶液处理量为5BV;脱附:洗脱剂为70%的乙醇溶液,流速1BV/h,洗脱剂用量4.5BV。异甘草素样品溶液经AB-8树脂吸附与脱附后回收率为76.7%,纯度由2.02%提高到29.1%,提高了14.4倍。实验结果表明,AB-8树脂对异甘草素的吸附量大,脱附容易,可以应用于异甘草素的分离纯化。     

Separation and purification of flavonoid from Taxus remainder extracts free of taxoids using polystyrene and polyamide resin

An efficient separation process of flavonoid from Taxus wallichiana var. mairei remainder extracts free of taxoids was developed in this study. AB‐8 macroporous resin and polyamide resin offered the fine adsorption capacity, and its adsorption rate at 30°C fitted well to the Langmuir and Freundich isotherms. Resin dynamic adsorption and desorption experiments were conducted to optimize the separation process of total flavonoids from T. wallichiana var. mairei remainder extracts free of taxoids. The optimum parameters for adsorption by AB‐8 resin were as follows: (1) the concentration of flavonoids in a sample solution of 5.61 mg/mL with a processing volume of 2 bed volume (BV) (60 mL); (2) for desorption, ethanol–water (80:20, v/v), with 6 BV as an eluent at a flow rate of 2 BV/h. After a one‐run treatment with AB‐8 resin, the content of flavonoids was increased 5.10‐fold from 4.05 to 20.65%. The optimum parameters for adsorption by polyamide resin were as follows: processing volume of 2 BV (30 mL); for desorption, ethanol–water (70:30, v/v), with 8 BV as an eluent at a flow rate of 2 BV/h. After one‐run treatment with polyamide resin, the content of total flavonoids increased from 20.65 to 65.21%. The method will provide a potential approach for large‐scale separation and purification of flavonoid for its wide pharmaceutical use.     

ADSORPTION AND DESORPTION OF DSD ACID MANUFACTURING WASTEWATER ON MACROPOROUS RESIN

4,4‘-diaminostilbene-2,2‘-disulfonic acid (DSD acid) manufacturing wastewater was treated by a macroporous resin in a fixed-bed column.The results showed that this method was suitable for removal of chemical oxygen demands(COD) and color,About 91% COD and 99.5% color removal were obtained under the optimum adsorption conditions.i.e.temperature 20℃,flow rate lbed volume/hour(BV/hr)and pH1-2.The resin was efficiently regenerated with aqueous sodium hydroxide and water.Furthermore,65.5% of 4,4‘-dinitrostilbene-2,2‘-disulfonic acid(DNS) could be recovered from wastewater for possible recycling to the manufactureing process.The adsorption capacity of resin remained constant during the repetition process of adsorption and desorption.     

Zn2＋型磺酸树脂对维生素B12的配位吸附及洗脱性能

原位吸附;分离;Zn2＋型磺酸树脂对维生素B12的配位吸附及洗脱性能     

大孔阳离子交换树脂对奈替米星的吸附研究

通过正交实验合成了9种大孔弱酸性阳离子交换树脂,筛选出具有最大动态饱和吸附量的FB-1树脂.采用红外光谱和热重分析的方法对其表征,并研究其对奈替米星的吸附及解吸性能,结果表明:该树脂对奈替米星的吸附符合Langrnuir吸附:用氨水做洗脱剂,0.3mol/L和0.4mol/L的氨水解吸率均达95%以上.FB-1与HD-2树脂比较:动态吸附量FB-1为398.0mg/mL湿树脂、HD-2为232.1mg/mL湿树脂;0.3mol/L氨水解吸,前者解吸率较后者高约15%.     

大孔树脂-高速逆流色谱法分离纯化地黄中毛蕊花糖苷

该文建立了大孔树脂-高速逆流色谱分离中药材地黄中有效成分毛蕊花糖苷的方法。考察了4种大孔树脂对地黄粗提物中毛蕊花糖苷的静态吸附与解吸情况,其中D101大孔树脂对目标成分的吸附率与解吸率最理想,实验结果表明体积分数为10%的乙醇洗脱得到的毛蕊花糖苷含量最高,目标成分含量从4.9%提高到32.6%。最后,部分纯化的样品（165 mg）采用高速逆流色谱进一步纯化,两相溶剂系统由乙酸乙酯-正丁醇-水（1：4：5,v/v/v）组成,分离得到45 mg纯度为96%的毛蕊花糖苷。     

酚醛型吸附树脂对VB_(12)的吸附性能研究

研究了酚醛型吸附树脂JDW 1、JDW 2 (自制 )和DuoliteS 76 1对VB12 的静态和动态吸附 .结果表明 ,JDW 1对VB12 的吸附量达 84mg g ,明显优于DuoliteS 76 1;吸附VB12 的初始阶段 ,即达到 4 3%～6 9%平衡吸附时 ,吸附速率数据和半经验速率方程很吻合 ;酚醛型吸附树脂等温吸附VB12 的平衡吸附数据符合Langmuir方程 ,相关系数在 0 99以上 ,因此 ,酚醛型吸附树脂吸附VB12 属单分子层吸附 ;在动态条件下 ,用含甲醇 80 %溶液以 1 1BV h来洗脱吸附VB12 的JDW 2 ,在 4 2、6 4个床体积的洗脱率分别是 92 2 0 %、95 93% ,这表明酚醛型吸附树脂具有良好的洗脱性能 ,用含甲醇为 80 %溶液作洗脱剂从JDW 2洗脱VB12 ,效果很好