Synthesis and biological evaluation of novel SIPI-7623 derivatives as farnesoid X receptor (FXR) antagonists

Most of reported steroidal FXR antagonists are restricted due to low potency. We described the design and synthesis of novel nonsteroidal scaffold SIPI-7623 derivatives as FXR antagonists. The most potent compound A-11 (IC₅₀?=?7.8?±?1.1 μM) showed better activity compared to SIPI-7623 (IC₅₀?=?40.8?±?1.7 μM) and guggulsterone (IC₅₀?=?45.9?±?1.1 μM). Docking of A-11 in FXR’s ligand-binding domain was also studied.

     

Novel tacrine-based acetylcholinesterase inhibitors as potential agents for the treatment of Alzheimer’s disease: Quinolotacrine hybrids

A new series of quinolotacrine hybrids including cyclopenta- and cyclohexa-quinolotacrine derivatives were designed, synthesized, and assessed as anti-cholinesterase (ChE) agents. The designed derivatives indicated higher inhibitory effect on the acetylcholinesterase (AChE) with IC₅₀ values of 0.285–100 µM compared to butyrylcholinesterase (BChE) with IC₅₀ values of?>?100 µM. Of these compounds, cyclohexa-quinolotacrine hybrids displayed a little better anti-AChE activity than cyclopenta-quinolotacrine hybrids. Compound 8-amino-7-(3-hydroxyphenyl)-5,7,9,10,11,12-hexahydro-6H-pyrano[2,3-b:5,6-c'] diquinolin-6-one (6m) including 3-hydroxyphenyl and cyclohexane ring moieties exhibited the best AChE inhibitory activity with IC₅₀ value of 0.285 µM. The kinetic and molecular docking studies indicated that compound 6m occupied both the catalytic anionic site (CAS) and peripheral anionic site (PAS) of AChE as a mixed inhibitor. Using neuroprotective assay against H₂O₂-induced cell death in PC12 cells, the compound 6h illustrated significant protection among the assessed compounds. In silico ADME studies estimated good drug-likeness for the designed compounds. As a result, these quinolotacrine hybrids can be very encouraging AChE inhibitors to treat Alzheimer’s disease.

Graphic abstract

A novel series of quinolotacrine hybrids were designed, synthesized, and evaluated against AChE and BChE enzymes as potential agents for the treatment of AD. The hybrids showed good to significant inhibitory activity against AChE (0.285–100 μM) compared to butyrylcholinesterase (BChE) with IC₅₀ values of?>?100 μM. Among them, compound 8-amino-7-(3-hydroxyphenyl)-5,7,9,10,11,12-hexahydro-6H-pyrano[2,3-b:5,6-c′] diquinolin-6-one (6 m) bearing 3-hydroxyphenyl moiety and cyclohexane ring exhibited the highest anti-AChE activity with IC₅₀ value of 0.285 μM. The kinetic and molecular docking studies illustrated that compound 6 m is a mixed inhibitor and binds to both the catalytic anionic site (CAS) and peripheral anionic site (PAS) of AChE.

     

Synthesis and biological evaluation of benzomorpholine derivatives as novel EZH2 inhibitors for anti-non-small cell lung cancer activity

The histone lysine methyltransferase EZH2 has been reported to play important roles in cancer aggressiveness, metastasis and poor prognosis. In this study, a series of benzomorpholine derivatives were synthesized and biologically evaluated as EZH2 inhibitors. The target compounds were obtained in good yields from 3-amino-5-bromo-2-hydroxybenzoic acid via cyclization, Suzuki coupling and amidation as the key steps. A preliminary optimization study led to the discovery of several potent novel EZH2 inhibitors (6b, 6c, 6x and 6y). Moreover, 6y inhibited the A549 and NCI-H1975 cell lines (IC₅₀?=?1.1 µM and 1.1 µM, respectively). Further studies indicated that 6y can reduce EZH2 expression in intact cells and cause cell arrest in the G2/M phase.

     

The 13C bicarbonate method: an inverse end product method for measuring CO2 production and energy expenditure

We reconsider the principle of the ¹³C bicarbonate (NaH¹³CO₃) method (¹³C-BM) for the determination of the CO₂ production to obtain an estimate of energy expenditure (EE). Its mathematical concept based on a three-compartmental model is related to the [¹⁵N]glycine end product method. The CO₂ production calculated by the ¹³C-BM, R_aCO₂(¹³C) is compared to the result from the indirect calorimetry, RCO₂(IC). In an interspecies comparison (dog, goat, horse, cattle, children, adult human; body mass ranging from 15 to 350?kg, resting and fasting conditions) we found an excellent correlation between the results of ¹³C-BM and IC with RCO₂(IC)?=?0.703?×?R_aCO₂(¹³C), (R²?=?0.99). The slope of this correlation corresponds to the fractional ¹³C recovery (RF(¹³C)) of ¹³C in breath CO₂ after administration of NaH¹³CO₃. Significant increase in RF(¹³C) was found in physically active dogs (0.95?±?0.14; n?=?5) vs. resting dogs (0.71?±?0.10, n?=?17; p?=?.015). The ¹³C recovery in young bulls was greater in blood CO₂ (0.81?±?0.05) vs. breath CO₂ (0.73?±?0.05, n?=?12, p?<?.001) and in ponies with oral (0.76?±?0.03, n?=?8) vs. intravenous administration of NaH¹³CO₃ (0.69?±?0.07; n?=?8; p?=?.026). We suggest considering the ¹³C-BM as a ‘stand-alone’ method to provide information on the total CO₂ production as an index of EE.     

Libraries of 2β-(N-substituted piperazino)-5α-androstane-3α, 17β-diols: chemical synthesis and cytotoxic effects on human leukemia HL-60 cells and on normal lymphocytes

Libraries of steroid derivatives with two levels of molecular diversity were prepared to optimize the antiproliferative activity on leukemia HL-60 cells by first varying the amino acid (AA) at R¹ (libraries A, B, C, and D: with 45, 45, 20, and 20 members, respectively) and, subsequently, the capping group at R² (library E: 168 members). The screening of these aminosteroids revealed interesting structure–activity relationships. In library A, the compounds bearing a tetrahydroisoquinolone residue as the first element of diversity showed potent cytotoxicity, principally when isovaleric or cyclohexyl acetic acid was used as a capping group (>40% of cell growth inhibition at 1 μM). In library B, the phenylalanine (Phe) derivatives bearing a cyano group induced a higher growth inhibition than the other Phe derivatives. The screening of library C indicated the increase of hydrophobicity of proline (Pro) seems to preserve the cytotoxic effect achieved by the lead compound. However, the synthesis of structural Pro variants (library D) clearly shows weaker activities when compared to L-Pro building blocks. Finally, by incorporating some of the most active AA of libraries A–D in library E, we observed that the amide coupling functionality gave stronger cytotoxic activity compared to the corresponding sulfonamides or benzylamines. Six of the most active amide derivatives (E-37P, E-41P, E-42P, E-46P, E-48F, and E-12T) were selected and IC₅₀ determined on HL-60 cells as well as on normal human lymphocytes. Among this series of new anticancer agents, good to high selectivity indices (SI = IC₅₀ (lymphocytes)/IC₅₀ (HL-60 cells) = 5 - 55) were obtained.     

X-ray structure refinement and ionic conductivity of Na6.69Ca3.355(SO4)6Cl0.77F0.63

The structure of Na_6.69Ca_3.355(SO₄)₆Cl_0.77F_0.63, isostructural with fluorapatite, was determined by X-ray powder diffraction methods. The results of Rietveld refinement revealed a space group P6₃/m with lattice parameters of a?=?9.477 (2) Å, c?=?6.865 (5) Å. Final refinement led to R _F?=?1.83 % and R _B?=?7.64 %. The location of Na⁺ ions in the M (2) sites surrounding the channels was related particularly to the high polarizability of the Ca²⁺. The ionic conductivity over a wide range of temperature was investigated according to the complex impedance method. The highest overall conductivity values were found at σ _500 °C?=?1.03?×?10^?5?S?cm^?1 and E_a?=?0.70 eV.     

Calibration of the R ruby fluorescence lines in the pressure range [0-1 GPa] and the temperature range [250-300 K]

Abstract

The pressure range [&1 GPa] and the temperature range [250–300 K] are commonly used in many science fields like biology, agro-chemistry, pharmacology, or geology. In this paper, the calibration of the ruby R lines of fluorescence is performed in these pressure and temperature ranges, using the melting curve of pure water. The linear shifts of ruby peaks are equal to ?0.140cm^?1/K and ?0.768cm^?1/kbar with R₁, and to ?0.137cm^?1/K and ?0.779 cm^?1/kbar with R₂. The accuracy of pressure measurements can be as good as ± 10MPa if the temperature is known with ±0.5 K. Such a precision is achieved if: (1) the position of each peak is determined using an inversion method; (2) daily shifts of the spectrometer are corrected before each acquisition; (3) peak positions of each ruby are known at ambient pressure and temperature.     

P–V–T equation of state of rhodium oxyhydroxide

A high pressure X-ray diffraction study of RhOOH was carried out up to 17.44?GPa to investigate the compression behavior of an oxyhydroxide with an InOOH-related structure. A fit to the third-order Birch–Murnaghan equation of state gave K₀?=?208?±?6?GPa, and K′?=?9.4?±?1.3. The temperature derivative of the bulk modulus was found to be ?K/?T?=??0.06?±?0.02?GPa K^?1. The refined parameters for volume thermal expansion were α₀?=?2.7?±?0.3?×?10^?5 K^?1; α₁?=?1.7?±?1.1?×?10^?8 K^?2 in the polynomial form (α(T)?=?α_0?+?α₁(T?300)). Our results show that RhOOH is very incompressible, and has a higher bulk modulus than other InOOH-structured oxyhydroxides (e.g. δ-AlOOH, ε-FeOOH, and γ-MnOOH).     

Novel Electrochemical Synthesis and Characterization of Zn(II) Metal Organic Framework for Photo-catalytic and Sensing Applications

Multidentate 1,3,5-benzenetricarboxylic acid (organic linker), Zn (II) based Zn-BTC has been synthesized via electrochemical method. Quantitative and Qualitative analyses of synthesized metal–organic framework (MOF) have been done using Fourier Transform Infrared (FTIR) Spectroscopy, Energy Dispersive X- Ray Spectroscopy (EDS), and Photoluminescence (PL). Powder X-Ray Diffraction (PXRD) and Scanning Electron Microscopy (SEM) have been used for crystallographic and morphological & topographical analyses, respectively. Crystallographic studies confirm the formation of face-centered cubic (fcc) crystal structure with good crystallinity. Photo-catalytic activity of synthesized MOF has been tested using Methylene Blue (MB) dye as a test contaminant in aqueous media under sunlight irradiation. Recorded results reveal that the synthesized MOF efficiently degrade MB dye upto 96% under sunlight exposure after 270 min. Photoluminescence studies indicate that Zn-BTC could be used as an efficient material for sensing of nitroaromatic compounds (NACs): 4-Nitroaniline (4-NA), 2-Nitroaniline (2-NA), 3- Nitroaniline (3-NA), 2,4-Dinitrotoulene (2,4-DNT), 4-Nitrotoulene (4-NT) in N,N’-Dimethylformamide (DMF) by fluorescence quenching and shows maximum quenching efficiency towards 3-NA (72.80%). Notably, the variation in luminescence intensity of 3-NA@Zn-BTC shows a linear relationship over its different concentrations from 0–1000 ppb range with K_SV?=?2.7?×?10⁴ M^?1 and R²?=?0.9924 with limit of detection 0.889 ppb (6.43 µM) (LOD). The possible ways of luminescence quenching are successfully explained by the combination of Photoinduced Electron Transfer (PET) and Resonance Energy Transfer (RET) mechanisms. Additionally, the Density Functional Theory (DFT) calculations have been employed to support the experimental results. Zn-BTC fully demonstrates the power of a multi component MOF, which provides a feasible pathway for the design of novel material towards fast responding luminescence sensing and photocatalytic degradation of pollutants.

Graphical Abstract

     

Computational study of linear and nonlinear optical properties of substituted thiophene imino dyes using long-range corrected hybrid DFT methods

The molecular structures, linear and nonlinear optical properties of a series constituted by four R-substituted thiophene imino dyes, namely A(R?=?SO₂Me), B(R?=?SO₂Ph), C(R?=?NO₂), and D(R?=?C₂(CN)₃) were analysed using CAM-B3LYP, ωB97XD and LC-ωPBE hybrid DFT functionals in combination of the 6-311++G(d,p) standard basis set. The dipole moments, polarisabilities, HOMO-LUMO energy gaps, maximum absorption wavelengths and first hyperpolarisabilities were calculated in the gas phase and the obtained results are in good agreement with experimental NLO activity order A?<?B?<?C. Compared to synthesised dyes A-C, the designed dye D presents a longer maximum absorption wavelength and a lower HOMO-LUMO gap because of the appreciable stabilisation of its LUMO energy. These results were confirmed by the calculation of the total second-order stabilisation energy E⁽²⁾ defined in the context of the NBO population analysis. Consequently, dye D is predicted to exhibit a higher first hyperpolarisability in comparison with dyes A-C. This result can be justified by the enhanced intramolecular charge transfer in dye D due to the stronger electron-withdrawing ability and the cumulative action of the long π-conjugation of the tricyanovinyl moiety. The very high total hyperpolarisability (27 times greater than that of para-nitroaniline) of the designed dye D suggests its promising use in organic NLO devices.     

Effects of strontium on the characteristics of Pb(Zr1/2Ti1/2)O3--Pb(Zn1/3Nb2/3)O3 ceramics

The dielectric and piezoelectric properties of pyrochlore-free lead zirconate titanate-lead zinc niobate ceramics were investigated systematically as a function of Sr doping. The powders of Pb_{(1? x )}Sr _x [0.7(Zr_{1 / 2}Ti_{1 / 2})–0.3(Zn_{1 / 3}Nb_{2 / 3})]O₃, where x?=?0–0.06 were prepared using the columbite-(wolframite) precursor method. The ceramic materials were characterized using X-ray diffraction, dielectric spectra, hysteresis and electromechanical measurements. The phase-pure perovskite phase of Sr-doped PZN--PZT ceramics was obtained over a wide compositional range. The results showed that the optimized electrical properties were also achieved at composition x?=?0.0, which were K _P?=?0.69, d ₃₃?=?670?pC?N^?1, P _r?=?31.9?µC?cm^?2 and ε_rmax?=?18600. Maximum dielectric constant values of the systems decreased rapidly with increasing Sr concentration. Moreover, with increasing Sr concentration dielectric constant versus temperature curves become gradually broader. The diffuseness parameter increased significantly with Sr doping. Furthermore, Sr doping has been shown to produce a linear reduction in the transition temperature (T _m)?=?294.1–12.7x°C with concentration (x). Sr shifts the transition temperature of this system at a rate of 12.7°C?mol^?1%.     

Segregation in In x Ga1− x As/GaAs Stranski–Krastanow layers grown by metal–organic chemical vapour deposition

Using quantitative high-resolution transmission electron microscopy we studied the chemical morphology of wetting layers in In _x Ga_{1? x} As/GaAs quantum dot structures which were optimized for applications to optical devices operating around 1.3?µm. The samples are grown by low-pressure metal–organic chemical vapour deposition on GaAs substrates. The In concentration profiles of the wetting layers are evaluated with the composition evaluation by lattice fringe analysis method. The profiles reveal a clear signature of segregation. A fit of the profiles with the Muraki et al. model for segregation reveals a segregation efficiency R?=?0.65?±?0.05 at the growth temperature of 550°C, which is significantly lower than segregation efficiencies observed in samples grown by molecular beam epitaxy at similar temperatures.     

ESR and optical study of Cu2+-doped bis-(5,5′-diethylbarbiturato)bis picoline Zn(II)

ESR studies were conducted on Cu²⁺-doped bis-(5,5′-diethylbarbiturato)bis picoline Zn(II). Two Cu²⁺ lattice sites, Cu²⁺(I) and Cu²⁺(II), were identified. These sites exhibit two sets of four hyperfine lines in all directions. The g factor and hyperfine splitting were calculated from ESR absorption spectra: g_x ?=?2.0201?±?0.002, g_y ?=?2.0900?±?0.002, g_z ?=?2.1634?±?0.002, A_x ?=?(30?±?2)?×?10^?4?cm^?1, A_y ?=?(40?±?2)?×?10^?4?cm^?1 and A_z ?=?(154?±?2)?×?10^?4?cm^?1. It was found that Cu²⁺ enters the lattice substitutionally. The ground-state wavefunction of the Cu²⁺ ion in this lattice was determined from the spin Hamiltonian constants obtained from the ESR studies. With the help of an optical absorption study, the nature of the bonding in the complex is also discussed.     

The keto-enol equilibrium in substituted acetaldehydes: focal-point analysis and ab initio limit

High-level ab initio electronic structure calculations up to the CCSD(T) theory level, including extrapolations to the complete basis set (CBS) limit, resulted in high precision energetics of the tautomeric equilibrium in 2-substituted acetaldehydes (XH₂C-CHO). The CCSD(T)/CBS relative energies of the tautomers were estimated using CCSD(T)/aug-cc-pVTZ, MP3/aug-cc-pVQZ, and MP2/aug-cc-pV5Z calculations with MP2/aug-cc-pVTZ geometries. The relative enol (XHC?=?CHOH) stabilities (ΔE _{e,CCSD(T)/CBS}) were found to be 5.98?±?0.17, ?1.67?±?0.82, 7.64?±?0.21, 8.39?±?0.31, 2.82?±?0.52, 10.27?±?0.39, 9.12?±?0.18, 5.47?±?0.53, 7.50?±?0.43, 10.12?±?0.51, 8.49?±?0.33, and 6.19?±?0.18?kcal?mol^?1 for X?=?BeH, BH₂, CH₃, Cl, CN, F, H, NC, NH₂, OCH₃, OH, and SH, respectively. Inconsistencies between the results of complex/composite energy computations methods Gn/CBS (G2, G3, CBS-4M, and CBS-QB3) and high-level ab initio methods (CCSD(T)/CBS and MP2/CBS) were found. DFT/aug-cc-pVTZ results with B3LYP, PBE0 (PBE1PBE), TPSS, and BMK density functionals were close to the CCSD(T)/CBS levels (MAD?=?1.04?kcal?mol^?1).     

Properties of (Bi1/9Na2/3)(Mn1/3Nb2/3)O3 analysed within dielectric permittivity,conductivity, electric modulus and derivative techniques approach

The (Bi_1/9Na_2/3)(Mn_1/3Nb_2/3)O₃ ceramics with perovskite structure were sintered. The XRD test proved that the samples are cubic (a?=?3.920?±?0.001?Å). Microstructure and atomic composition were determined with a SEM (JSM-5410) equipped with energy dispersion X-ray analyser (ISIS-300). The fluctuation in the chemical composition was found indicating on local disorder. Broadband dielectric spectroscopy in the range 10^?1–3?·?10⁷?Hz was applied within the range of 100–650?K. The real, ?′(f,?T), and imaginary, ?″(f,?T), parts of complex dielectric permitivity characteristics, both in the temperature and frequency domain, show relaxation processes partially covered by electric conductivity. At high temperatures the electric conductivity exhibits a thermally activated behaviour σ(f,?T)?∝?exp(?E _a/kT) but the variable range hopping (VRH) dependence σ?∝?exp[?(T ₀/T)^1/4] is manifested at low temperatures. The derivatives technique in the frequency (??log??/??log?ω) and temperature (??log??/?T) domain enabled various relaxation processes to be distinguished. The data converted to electric modulus representation, M*(f,?T)?=?1/?*, exhibited clearly resolved relaxation peaks. The relaxation times obtained from the peaks position show a slightly non-Arrhenius temperature behaviour with the activation energy varying in 0.4–0.6?eV range and characteristic time of the electric conductivity relaxation of the order of 10^?12?s. The relaxation times can be fitted at better accuracy with the VRH dependence where T ₀ are of the order of 10⁸?K. It is shown that the low frequency ac-conductivity converges to dc-conductivity and the relation σ(0)?～?ω_m?～?τ_m ^?1 typical for the disordered solids applies. The conduction current relaxation relationship behaves in accord with the VRH system: σ_dc?∝?(T/T ₀)^q (e ²/kT) ω_c, where ω_c?=?ν_ph exp[?(T ₀/T)^1/4] is valid for the locally disordered (Bi_1/9Na_2/3)(Mn_1/3Nb_2/3)O₃ compound.     

Precision bond lengths for Rydberg Matter clusters K19 in excitation levels n =4, 5 and 6 from rotational radio-frequency emission spectra

Several long series of up to 40 equally spaced lines are observed in the radio-frequency range 15–90?MHz that are attributed to stimulated emission from the electronically excited condensed matter called Rydberg Matter (RM). These frequencies are more than a factor of 1000 smaller than for most ordinary molecules, and if they did not agree with RM clusters they would indicate extremely large and heavy molecules that are unlikely to exist in the gas phase at room temperature. Theoretical predictions for RM clusters agree within 2% with the observed frequencies. Such clusters are planar, six-fold symmetric oblate rotors. The most prominent series with B?=?0.9292?±?0.0001?MHz (3.067?×?10^?5?cm^?1) agrees accurately with the theoretically predicted B value for the cluster K₁₉ in excitation level n?=?4, thus with a K–K bond length of 2.4074?nm. Two other prominent long series agree accurately with K₁₉ at n?=?5 and 6, with bond lengths of 3.804 and 5.518?nm, respectively. The ratio between the interatomic distance and the electron orbit radius for n?=?4 is found to be 2.8433?±?0.0003, a considerable improvement in precision over the theoretical value of 2.9.     

Breath water-based doubly labelled water method for the noninvasive determination of CO2 production and energy expenditure in mice

ABSTRACT

We explored a novel doubly labelled water (DLW) method based on breath water (BW-DLW) in mice to determine whole body CO₂ production and energy expenditure noninvasively. The BW-DLW method was compared to the DLW based on blood plasma. Mice (n?=?11, 43.5?±?4.6?g body mass (BM)) were administered orally a single bolus of doubly labelled water (1.2?g H₂¹⁸O kg BM^?1 and 0.4?g ²H₂O kg BM^?1, 99 atom% (AP) ¹⁸O or ²H). To sample breath water, the mice were placed into a respiration vessel. The exhaled water vapour was condensed in a cold-trap. The isotope enrichments of breath water were compared with plasma samples. The ²H/¹H and ¹⁸O/¹⁶O isotope ratios were measured by means of isotope ratio mass spectrometry. The CO₂ production (RCO₂) was calculated from the ²H and ¹⁸O enrichments in breath water and plasma over 5 days. The isotope enrichments of breath water vs. plasma were correlated (R²?=?0.89 for ²H and 0.95 for ¹⁸O) linearly. The RCO₂ determined based on breath water and plasma was not different (113.2?±?12.7 vs. 111.4?±?11.0?mmol?d^–1), respectively. In conclusion, the novel BW-DLW method is appropriate to obtain reliable estimates of RCO₂ avoiding blood sampling.     

Experimental and Theoretical Studies of the Pyrazoline Derivative 5-(4-methylphenyl)-3-(5-methylfuran-2-yl)-1-phenyl-4,5-dihydro-1H-Pyrazole and its Application for Selective Detection of Cd2+ ion as Fluorescent Sensor

A simple fluorescent chemosensor 5-(4-methylphenyl)-3-(5-methylfuran-2-yl)-1-phenyl-4, 5-dihydro-1H-pyrazole (PY) has been synthesized for the detection of Cd²⁺ ion.The fluorescent probe PY shows high selectivity for Cd²⁺in the presence of othermetal ions (Co²⁺, Cu²⁺, Hg²⁺, Mn²⁺, Zn²⁺, Fe³⁺, Pb²⁺, Ni²⁺, and Al³⁺). The fluorescence intensity of the PY has been strongly quenched with increasing concentration of Cd²⁺ (0–0.9 μM)via photoinduced electron transfer mechanism. The binding constant of Cd²⁺ to PY for the 1:1 complex isfound to be 5.3?×?10⁵ M^?1with a detection limit of 0.09 μM. The chemosensor was successfully applied for determination of Cd²⁺ in different water samples (tap, river, and bottled water) showing good recovery values in the range of 94.8–101.7% with RSD less than 3%. Density functional theory (DFT) calculations were also performed to investigate electronic and spectral characteristics which are quite agreeable with the experimental value. The results show that the synthesized fluorescent chemosensor shows good selectivity towards Cd²⁺ and can be readily applied for the detection of Cd²⁺ in real samples including water samples.

Graphical Abstract

     

Additivity and non-additivity of dissociation energies in intermolecular interactions. Theoretical studies on (H2)n,n = 2-8, (CO2)n,n = 2-6 and (HF)n,n = 2-8

CCSD(T) and MP2 results using the aug-cc-pV5Z basis set are reported for chain, cyclic and other structures of the clusters (H₂)_n, n?=?2-8, (CO₂)_n, n?=?2-6 and (HF)_n, n?=?2-8. In chain-like structures of (H₂)_n and (CO₂)_n, with the bonding type of the dimer maintained, the dissociation energy D_e of the dimer doubles for the trimer, triples for the tetramer, and so on. Due to these systems being dominated by short-range forces, interactions are essentially restricted to neighbouring monomers. For other types of (H₂)_n and (CO₂)_n structures, the multipliers relative to the dimerisation energy can be much higher. Dissociation energies for the hexamers in S₆ symmetry of both H₂ (379?cm^?1) and CO₂ (4925?cm^?1) are over ten times the respective dimerisation energies. For the chain-like trimer of HF, however, D_e is in excess of double the dimer value. Mainly due to longer-range dipolar forces, the interactions reach beyond the neighbouring monomers. The interaction energy between HF monomers in chains follows an approximate R^?2 (R being the F–F distance) relationship, The calculated dissociation energies of the HF octamer are 15,985?cm^?1 (factor of 10.4) for the chain, and 21,003?cm^?1 (factor of 13.7) for the C_6h cyclic structure.