新型树枝状桥联镍配合物的合成及催化烯烃齐聚性能

合成了一种N,N-二齿配位的新型树枝状桥联吡啶亚胺配体及其镍配合物,利用元素分析、傅里叶变换红外光谱(FTIR)和电喷雾电离质谱(ESI-MS)对其结构进行了表征.以二氯乙基铝(Et Al Cl2)为助催化剂,考察了树枝状桥联镍配合物催化乙烯齐聚和1-戊烯齐聚的聚合条件对产物分布的影响.结果表明,当聚合时间为60 min,聚合压力为0.5 MPa,Al/Ni摩尔比为150时,乙烯齐聚产物中C10~C14的选择性最高,达到93%,催化活性为0.99×106g/(mol Ni·h);当聚合时间为60 min,Al/Ni摩尔比为300时,1-戊烯齐聚产物中C20的选择性最高为70.5%,催化活性为2.47×105g/(mol Ni·h).该树枝状桥联镍配合物对乙烯齐聚反应和1-戊烯齐聚反应均具有良好的催化活性和较高碳数的齐聚产物选择性.     

树状PAMAM改性纳米二氧化硅负载镍催化剂的制备及催化乙烯齐聚性能

以纳米二氧化硅为载体,树状聚酰胺-胺(PAMAM)镍络合物为催化活性中心,通过共价负载制备了一种具有良好催化活性和循环利用性的PAMAM改性纳米二氧化硅负载镍催化剂(化合物G).采用元素分析、傅里叶变换红外光谱(FTIR)、 X射线衍射(XRD)和扫描电子显微镜(SEM)表征了化合物G的组成及形貌.研究了该类负载镍催化剂催化乙烯齐聚的性能,考察了齐聚条件对其性能的影响.结果表明,化合物G具有良好的催化乙烯齐聚活性和循环利用性.基于灰色关联分析得出反应压力是影响乙烯齐聚活性的最主要因素,反应温度是影响乙烯齐聚选择性的最主要因素.当以甲基铝氧烷(MAO)为助催化剂,反应压力0.7 MPa, n(Al)/n(Ni)为500,反应温度为35℃,主催化剂用量为5μmol时,化合物G催化乙烯齐聚活性为3.75×105 g/(mol Ni·h),齐聚产物中C4～C8烯烃选择性为94.98%.化合物G的树状效应使其金属负载量、催化乙烯齐聚活性和C8烯烃的选择性均高于氨基化改性纳米二氧化硅负载镍(化合物E);且化合物G经3次回收循环使用后,催化乙烯齐聚活性为3.12×105 g/(mol Ni·h),齐...     

树枝状钴催化剂的合成及催化乙烯齐聚性能

以1,8-辛二胺为核的1.0代(1.0G)树枝状分子、水杨醛和六水氯化钴为原料,依次通过席夫碱反应和配位反应合成了一种新型树枝状水杨醛亚胺配体和钴催化剂;并对目标产物进行FT-IR、UV、1H NMR和MS表征,证实其合成产物的结构与理论结构相符。考察了助催化剂种类、溶剂种类、反应条件及金属活性中心对乙烯齐聚性能的影响。结果表明,当以一氯二乙基铝(Et2Al Cl)为助催化剂、甲苯为溶剂时,催化剂具有良好的催化乙烯齐聚性能,并在反应温度为25℃、Al/Co摩尔比为1500、压力为1.0MPa、时间为0.5h时,催化活性达到6.84×10~5g/(mol Co·h),齐聚产物中C_8及C_8以上的烯烃含量为52.77%。     

硅烷基Schiff碱共价修饰纳米二氧化硅负载过渡金属催化乙烯齐聚性能

将3种水杨醛Schiff亚胺配合过渡金属（Si-Schiff-M,M=Ni,Co,Cr）通过共价键接枝到纳米二氧化硅,制备了3种硅烷基Schiff碱共价修饰纳米二氧化硅负载过渡金属催化剂（Si-Schiff-SiO₂-M）,并对其催化乙烯齐聚性能进行了研究;采用元素分析、红外光谱、扫描电子显微镜和电感耦合等离子色谱表征了3种Si-Schiff-SiO₂-M的结构和形貌。以甲基铝氧烷（MAO）为助催化剂,研究了反应条件及催化活性中心种类对3种Si-Schiff-SiO₂-M催化乙烯齐聚产物性能的影响。结果表明,当Si-Schiff-SiO₂-M用量为7 μmol, n（Al）/n（M）（M=Cr,Ni,Co）为500,反应温度为35 ℃,反应压力为0.5 MPa和反应时间为30 min时, Si-Schiff-SiO₂-Cr、Si-Schiff-SiO₂-Ni和Si-Schiff-SiO₂-Co催化乙烯齐聚活性分别为1.92×10⁵ g/（mol Cr·h）、2.17×10⁵ g/（mol Ni·h）和2.07×10⁵ g/（mol Co·h）,且3种催化剂催化乙烯齐聚产物主要是C4和C6烯烃。Si-Schiff-SiO₂-M由于载体的限域效应,其催化乙烯齐聚活性低于相应的均相催化剂（Si-Schiff-M）,但产物分布较均相催化剂窄。Si-Schiff-SiO₂-M具有良好的循环利用性,3次循环使用后,3种负载型催化剂催化乙烯齐聚活性分别为1.39×10⁵ g/（mol Cr·h）、1.68×10⁵ g/（mol Ni·h）和1.42×10⁵ g/（mol Co·h）。     

芳氧基锆系催化剂催化乙烯齐聚与Friedel-Crafts烷基化的串联反应

从锆系催化剂的结构修饰出发,合成了一系列具有Zr(OAr)nCl4-n·m Ar OH(n=1~4,m=0~7)结构的芳氧基锆系催化剂,并研究了锆酚配比及游离Ar OH含量等对乙烯齐聚行为的影响.结果表明,Zr(OPh)3Cl·m Ph OH/TEA/Et Al Cl2催化体系具有较高的齐聚催化活性[6.8×104g/(mol Zr·h)],所得产物主要为C4~C24的α-烯烃,无高聚物生成.研究发现,游离酚的存在对体系的催化性能有较大影响.该系列芳氧基锆系催化剂可催化乙烯齐聚与Friedel-Crafts烷基化的串联反应,即齐聚反应产物α-烯烃与甲苯溶剂发生烷基化反应而生成多取代芳香烃,压力越大烷基化反应程度越高.     

吡啶亚胺基酞菁镍系催化剂催化乙烯齐聚性能及其动力学研究

以四氨基镍酞菁、吡啶-2-甲醛和NiCl2·6H2O为原料,先后经过席夫碱反应和络合反应得到一种新型吡啶亚胺基酞菁配体及其镍系催化剂。合成产物的结构通过红外光谱(FTIR)、紫外(UV-Vis)、核磁共振氢谱(¹H-NMR)、电感耦合等离子体质谱(ICP-MS)、同步热分析(TG-DSC)及电喷雾电离质谱(ESI-MS)等方法进行表征。对其催化乙烯齐聚性能进行考察,并研究了该反应的动力学。催化乙烯齐聚实验结果表明,当溶剂为环己烷、助催化剂为甲基铝氧烷(MAO)、催化剂用量为5μmol/L、齐聚压力为1.0 MPa、齐聚温度为35℃、Al/Ni摩尔比为500时,吡啶亚胺基酞菁镍系催化剂的活性可达8.82×10⁵ g/(mol Ni·h),丁烯和己烯的含量分别为58.22%和39.85%。对吡啶亚胺基酞菁镍系催化剂催化乙烯齐聚反应动力学方程进行拟合计算,结果表明该反应对催化剂摩尔浓度的反应级数为1.24,对齐聚压力的反应级数为0.95,当活性中心的浓度为5μmol/L、齐聚压力为1.0 MPa、齐聚温度为5～35℃时,该反应的表观活化能为71.4...     

树枝状吡啶亚胺铬催化剂的合成及其催化性能研究

以1. 0代聚酰胺-胺树枝状大分子为配体骨架、吡啶二甲醛为原料,合成了一种新型树枝状吡啶亚胺(DPI)配体,再以CrCl_3·6H_2O为络合试剂,制备DPI-Cr催化剂。采用IR、UV-Vis、MS、元素分析等确证了产物结构。考察溶剂种类、助催化剂种类、反应温度、乙烯压力以及Al/Cr摩尔比对DPI-Cr催化乙烯齐聚性能的影响。结果表明,DPI-Cr催化剂表现出良好的催化活性和烯烃选择性,优化反应条件下,催化效率可达4. 91×10~4g/mol Cr·h,C_6和C_8选择性为73. 90%。     

一维金属铁有机配位聚合物的乙烯选择性四聚催化性能研究

以AlEt_2Cl为助催化剂,将一维金属铁有机配位聚合物应用于乙烯齐聚,并考察了金属铁有机配位聚合物的真空处理温度、催化体系的反应时间、反应压力、催化剂用量和n(Al)/n(Fe)对乙烯齐聚性能的影响.结果表明,该一维铁催化体系的C8选择性高达94.75%,其中α-C8占19.18%,催化活性可达3.88×10~5g/(mol Fe h).     

树枝状钴系催化剂的合成及催化乙烯齐聚性能

以1,8-辛二胺为核的1.0代(1.0G)树枝状大分子、水杨醛和六水氯化钴为原料,依次通过席夫碱反应和配位反应合成了一种新型的树枝状水杨醛亚胺配体和钴系催化剂;并对目标产物进行FT-IR、UV、1H NMR和MS表征,证实其合成产物的结构与理论结构相符。考察了助催化剂种类、溶剂种类、反应条件及金属活性中心对乙烯齐聚性能的影响。结果表明,当以一氯二乙基铝(Et2AlCl)为助催化剂,甲苯为溶剂时,催化剂具有良好的催化乙烯齐聚性能,并在反应温度为25℃、Al/Co摩尔比为1500、压力为1.0 MPa、时间为0.5 h时,催化活性达到6.84×105 g/(mol Co?h),齐聚产物中C8及C8以上的烯烃含量为52.77%。     

α-二亚胺镍(Ⅱ)催化甲基丙烯酸甲酯聚合

以4种不同结构的α-二亚胺镍(Ⅱ)催化剂[(t-Bu)—N CH—CH N—(t-Bu)]NiBr2(C1),[C6H5—N C(Me)—C(Me)N—C6H5]NiBr2(C2),[(2,6-C6H3(Me)2)—N C(Me)—C·(Me)N—(2,6-C6H3(Me)2)]NiBr2(C3)和[(2,6-C6H3(i-Pr)2)—N C(An)—C(An)N—(2,6-C6H3(i-Pr)2)]NiBr2(An=acenaphthyl)(C4),在甲基铝氧烷(MAO)作用下,对甲基丙烯酸甲酯(MMA)进行催化聚合.以C2为模型催化剂系统研究了Al/Ni摩尔比、单体浓度、聚合温度、聚合时间和反应溶剂对催化活性及聚合物分子量的影响.在较适合的聚合条件(催化剂用量为1.6μmol,Al/Ni摩尔比为800,MMA浓度为2.9 mol/L,甲苯为溶剂,聚合温度为60℃,聚合时间为4 h)下,讨论了催化剂结构对催化活性和聚合物分子量的影响.研究发现,催化剂C1~C3催化MMA聚合均得到富含间规结构的聚甲基丙烯酸甲酯(PMMA).催化剂结构中空间位阻增大导致催化活性降低,空间位阻最小的C1催化活性最高[达107.8 kg/(mol Ni·h)];而空间位阻最大的C4催化活性仅为7.8 kg/(mol Ni·h).催化剂结构中给电子效应增加有利于催化活性及聚合物分子量的增加.C2催化活性为62.5 kg/(mol Ni·h),所得聚合物的分子量为5.0×104;而具有较强给电子效应的C3催化活性达到96.9 kg/(mol Ni·h),并得到更高分子量的聚合物(7.6×104).     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.