Tris(2-methyl-8-quinolinolato)gallium(III) as a fluorescent probe for sensitive silanol-testing.

The peak shape of tris(2-methyl-8-quinolinolato)gallium(III) by reversed-phase high-performance liquid chromatography was found to be very sensitive to trace amounts of silanol groups on the surface of octadecylsylanized silica gel (ODS silica gel). The variation of the peak of the gallium(III) complex can be used as a probe of the residual silanol groups in an ODS column. The chromatographic peak parameters of the complex were compared with the silanol activities output by some silanol-detecting tests using nitrogen-containing compounds as probes. The comparison was performed with several commercially available ODS columns and laboratory-packed columns in which the amount of silanol groups was controlled by mixing fully endcapped ODS materials and a non-endcapped ODS material. The peak height was the most effective parameter among the peak parameters, and much more sensitive than the silanol-detecting tests using nitrogen-containing compounds, in detecting a trace amount of silanol groups that could not be detected by other silanol-detecting tests.     

Test compounds for detecting the silanol effect on the elution of ionized amines in reversed‐phase LC

The effectiveness of several basic compounds for testing silica‐based stationary phases was reviewed by applying them to recent columns for reversed‐phase HPLC. Most octadecylsilylated (C18) stationary phases, prepared as a base‐deactivated material from high‐purity silica gel with endcapping, provided excellent peak shape and column efficiency for the bases including benzylamine and amitriptyline that once caused problems and were subsequently employed for testing silanol activities. However, a cyclic tertiary amine, dextrometorphan, was eluted as an acceptable peak from only a few columns at neutral pH. Such a more sensitive probe is expected to contribute to further improvement of the stationary phase for reversed‐phase HPLC.     

Comparison of the chromatography of octadecyl silane bonded silica and polybutadiene-coated zirconia phases based on a diverse set of cationic drugs

In this study, we compare the separation of basic drugs on several octadecyl silane bonded silica (ODS) phases and a polybutadiene-coated zirconia (PBD-ZrO2) phase. The retention characteristics were investigated in detail using a variety of cationic drugs as probe solutes. The ODS phases were selected to cover a relatively wide range in silanol activity and were studied with ammonium phosphate eluents at pH 3.0 and 6.0. Compared to any of the ODS phases, the PBD-ZrO2 phase showed very significant differences in selectivities towards these drugs. Due to the presence of both reversed-phase and ion-exchange interactions between the stationary phase and the basic analyte on ODS and PBD-ZrO2, mixed-mode retention takes place to some extent on both types of phases. However, very large differences in the relative contributions from ion-exchange and reversed-phase interactions on the two types of phases led to quite different selectivities. When phosphate is present in the eluent and adsorbs on the surface, the PBD-ZrO2 phase takes on a high negative charge over a wide pH range due to phosphate adsorption on its surface. On ODS phases, ion-exchange interactions result from the interactions between protonated basic compounds and ionized residual silanol groups. Since the pH of the eluent influences the charge state of the silanol groups, the ion-exchange interactions vary in strength depending on pH. At pH 6.0, the ion-exchange interactions are strong. However, at pH 3.0 the ion-exchange interactions on ODS are significantly smaller because the silanol groups are less dissociated at the lower pH. Thus, not only are the selectivities of the ODS and PBD-ZrO2 phases different but quite different trends in retention are observed on these two types of phases as the pH of the eluent is varied. More importantly, by using the large set of "real" basic analytes we show the extreme complexity of the chromatographic processes on the reversed stationary phases. Both the test condition and solute property influence the column performance. Therefore, use of only one or two probe solutes is not sufficient for column ranking.     

Sorption of iron(III) in ionic and colloidal states on iron(III) oxide deposited on a silica gel sufrace

The sorption of iron(III) in ionic and colloidal states on iron(III) oxide deposited on a silica gel surface has been studied as a function of pH of aqueous solution by batch equilibrations. The behaviour of Fe³⁺ and colloidal Fe(III) on the sorbent column has also been investigated. Conditions for sorption of iron from aqueous solutions are given. The colloidal iron(III) can be quantitatively separated from Fe³⁺ on the sorbent column under given experimental conditions.     

Separation of Tron(Iii) By Extraction Chromatography With Aliquat 3365 From Citrate Solution

Abstract

A rapid method is proposed for separation of iron(III) with Aliquat 336S as the stationary phase coated on silica gel column with citric acid buffered at pH 4,5 as mobile phase. the extracted iron is stripped from the column with different mineral acids and determined spectrophotracally as its complex with 1,10-phenanthroline, Iron was separated from chromium, molybdenum, titanium and nickel which are generally associated in steel samples. Similar separations of iron from lead, zinc, cadmium, bismuth and cobalt have significance in environmental sample analysis. the method is extended for analysis of iron from samples of sediment and sea-water.     

Interaction between thallium(III) bromide and dicyclohexano-18-crown-6 immobilized on silica

The adsorption of cis-syn-cis-dicyclohexano-18-crown-6 on silica gel from organic solvents was studied. In the adsorption from chloroform solutions, the immobilization of the reagent molecules at the surface was coplanar. Hydrogen bonds between surface silanol groups and oxygen atoms of the polyether ring of the crown ether play an important role in the immobilization of the reagent. The reaction between thallium(III) bromide and the immobilized reagent was studied. The composition of complex compounds formed at the surface of the modified adsorbent was found. A procedure was proposed for the sorption-spectrophotometric determination of thallium(III) (≥0.05 mg/L) in the presence of heavy metal ions.     

The 1H NMR spectra of 8-quinolinolato complexes of Mn(III)

¹H NMR spectra are reported for tris(8-quinolinolato)manganese(III), tris(2-methyl-8-quinolinolato)manganese(III) and mixtures of tris(acetylacetonato)manganese(III) and tris(8-quinolinolato)manganese(III). In the latter case, mixed complexes are formed in equilibrium, with only one of the three possible isomers of acetylacetonato bis(8-quinolinolato)manganese(III) being present in detectable amounts. The spectra were assigned making extensive use of selective deuteriation.     

Separation Mechanism of Copolymers from Styrene and Methyl Methacrylate According to Composition by Liquid Adsorption Chromatography

Abstract

Silica gel and a mixture of chloroform and ethanol were used as the stationary and the mobile phases, respectively. At the isocratic elution mode, the copolymers tended to adsorb on the column with increasing MMA content in the copolymers, with increasing column temperature, and with decreasing ethanol content in the mobile phase. The copolymers appeared always at the position proportional to the interstitial volume in the column, otherwise they adsorbed on the column. The equilibrium distribution of the copolymers between the mobile phase and the stationary phase cannot be considered in this system. Hydrogen bonding of carbonyl groups in MMA units of the copolymers to silanol groups on the surface of silica gel was considered to be the main interaction between the copolymers and the adsorbent. The hydrogen bonding increases with increasing the number of carbonyl groups per unit surface of copolymer coil in solution and with increasing free silanol groups on the silica surface. Ethanol in the stationary phase controls the content of the free silanol groups on the surface and is controlled by the content of ethanol in the mobile phase in addition to column temperature. This phenomena can be explained by introducing the term of the adsorption energy of a copolymer segment with the silica surface. The adsorption energy is proportional to the strength of the hydrogen bonding. Above the critical adsorption energy which is defined to be equal to the dissolution energy of the copolymer to the mobile pahse, the copolymers adsorb on the surface of silica gel and the desorption of the copolymers advances when the adsorption energy approaches to the critical adsorption energy. No adsorption of the copolymers is possible when the adsorption energy is equal or below the critical adsorption energy.     

Study of the selective extraction of iron (III) by silica-immobilized 5-formyl-3-arylazo-salicylic acid derivatives

A method for immobilization of 5-formyl-3-arylazosalicylic acid derivatives on the surface of silica gel is described. The new silica gel phases were synthesized by a very simple and rapid route which can be defined as a one-step reaction. The phases were proved to show an excellent improvement in the iron (III) extraction and the determined mmol g(-1) values are in the range of 1.24 - 1.32. The metal-uptake properties of eleven metal ions were also evaluated at different pH values and shaking times. The process of selective extraction of iron (III), in presence of an interfering ion, by these phases was also studied by both column and batch equilibrium techniques in order to identify the possible type of interference of each metal ion in this process. Three divalent metal ions (Mg, Ca and Mn) exhibited a minimum interference in iron (III) extraction. A group of six divalent metal ions (Co, Ni, Cu, Zn, Cd and Pb) were found to be interfering in the selective extraction of iron (III) via the arylazo-moiety of the silica phase, while Cr(III) was found to show a specific interference type based on the affinity of Cr(III) for binding to the chelation centers of the salicylic acid moiety of the silica phase.     

厚朴酚键合硅胶高效液相色谱固定相分离嘌呤、嘧啶、蝶呤及黄酮

将新制备的厚朴酚键合硅胶固定相(MSP)用于嘌呤、嘧啶、蝶呤及黄酮类化合物的液相色谱分离分析。选取了4种嘌呤、8种嘧啶、4种蝶呤及5种黄酮类药物作为极性化合物的代表,以商品反相碳十八烷基键合硅胶柱(ODS)作参照,研究了新固定相对碱性化合物的选择性和相关分离机理。实验发现,在简单流动相条件下,厚朴酚键合硅胶固定相对上述药物表现出较高的选择性及分离效果。尽管MSP没有进行封尾处理,但含氮类极性化合物(嘌呤、嘧啶、蝶呤)仍表现出基本对称的色谱峰形。多数药物在两柱上的洗脱顺序大致相同,说明疏水作用始终存在,这说明新固定相具有反相色谱性能。比较研究还发现,MSP在分离上述极性药物时能够提供除疏水性作用之外的其他作用位点。例如,在分离嘌呤、嘧啶及蝶呤时,氢键和偶极作用明显存在;同时MSP与溶质结构中的芳环(硫唑嘌呤、紫花牡荆素)之间有较强的π-π电子相互作用等,使得含氮类极性化合物和黄酮的保留一般比ODS强,分离度也有一定的改善。多种作用可以合理地解释MSP柱对极性溶质有更强的分离能力,厚朴酚键合硅胶固定相可在一定程度上弥补ODS单一疏水作用的不足,有利于分类碱性化合物。     

Accessible silanol sites - beneficial for the RP-HPLC separation of constitutional and diastereomeric azaspirovesamicol isomers

Different RP-HPLC columns (phenyl, conventional ODS, cross-linked C(18) and special end-capped C(8) and C(18) phases) were used to investigate the separation of four basic ionizable isomers. Using ACN/20mM NH(4)OAc aq., a separation was observed exclusively on RP columns with higher silanol activity at unusual high ACN concentration, indicating cation-exchange as main retention mechanism. Using MeOH/20mM NH(4)OAc aq., another separation at low MeOH concentrations was observed on both, RP columns with higher as well as RP columns with lower silanol activity, which is mainly based on hydrophobic interactions. The isomers were also separated on a bare silica column at higher MeOH content using NH(4)OAc. Since cation-exchange governs this retention, the elution order was different compared to the RP phases. A strong retention on the silica column was observed in ACN, which could be attributed to partition processes as additional retention mechanism.     

Selective solid phase extraction and preconcentration of iron(III) based on silica gel-chemically immobilized purpurogallin

The immobilization of purpurogallin on the surface of amino group containing silica gel phase for the formation of a newly synthesized silica gel-bound purpurogallin (SGBP) is described. The surface modification was studied and evaluated by determination of the surface coverage value by both the elemental analysis and metal probe testing method, which was found to be 0.485 and 0.460 mmol g⁻¹, respectively. The metal sorption properties of SGBP were examined by a series of di- and tri-valent metal ions. The metal capacity values (mmol g⁻¹) for this series of metal ions were also determined under different buffer solutions (pH 1.0–6.0) as well as shaking times by the batch equilibrium technique. The results of this study confirmed the strong affinity and selectivity as well as the fast equilibration and interaction processes of SGBP and Fe(III) compared to the other tested metal ions. The reduction–oxidation process of iron(II)/iron(III) by SGBP was also studied and the results indicated only 2.1% reduction of iron(III) into iron(II). The selectivity incorporated into silica gel phase via the immobilization of purpurogallin was intensively studied for a several binary mixtures containing iron(III)—another interfering metal ion. The determined percentage extraction values of iron(III) from these mixtures were found to be in the range of 94–100%. The potential applications of SGBP as a selective solid extractor for iron(III) from natural tap water samples and real matrices were also studied and the results revealed good percentage extraction values of iron(III) (93.5−94.9±4.6−5.3%) of the spiked iron(III) in the acidified tap water samples as well as a high preconcentration factor of 500 was also established when SGBP was used as a selective solid phase extractor and preconcentration of iron(III) from acidified soft drink samples with percentage recovery values of (98.0−97.4±4.7−5.3%) of the spiked iron(III).     

Reversed phase HPLC determination of titanium(IV) and iron(III) with sodium 1,2-dihydroxybenzene-3,5-disulfonic acid

A highly sensitive method has been developed for the determination of titanium(IV) and iron(III) by ion-pair reversed phase liquid chromatography using sodium 1,2-dihydroxybenzene-3,5-disulfonic acid (Tiron) as a precolumn chelating reagent. The metal - Tiron chelates were separated on a C₁₈ (ODS) column; the mobile phase was a 2:8 (v/v) mixture of acetonitrile and acetate buffer (0.04 mol/L, pH 6.2) containing 2.0 × 10^?3 mol/L Tiron, 0.04 mol/L tetrabutylammonium bromide, and 0.1 mol/L potassium nitrate. The detection limits for titanium(IV) and iron(III) are 0.5 and 2.0 μg/L, respectively. The method has been applied to the simultaneous determination of titanium(IV) and iron(III) in river water samples and has furnished highly precise results.     

The versatile surface properties of poly(cyclopentadiene)-modified silica particles (PCPD–silica): XPS and electrokinetic studies

Surface properties of poly(cyclopentadiene)–silica hybrid particles (PCPD–silica) were studied by means of XPS and electrokinetic measurements. The surfaces of PCPD–silica particles exhibit two different areas with different properties: bare silica holes and PCPD patches. The PCPD chains contain different functional groups such as alcohol and carbonyl groups that were identified by XPS. The PCPD chains are grafted covalently onto the silica surface via Si–O–C bonds created by the reaction of silanol groups and active PCPD chains. The amount of Si–O–C was examinated by means of XPS. The Brønsted acidity of the residual silanol groups was determined by means of electro-kinetic measurements. It was found that the pK _a values of the residual silanol groups increase with increasing polymer content on the particle surface. The surface acceptor strengths of the hybrid particles in non-aqueous liquids were investigated by the solvatochromic indicator bis(1,10-phenanthroline)-cis-dicyano-iron-II in 1,2-dichloroethane.     

Sorption of iron(II) and ruthenium(III)-triazine complexes on silica gel and its analytical applicability

2,4,6-Tri(2′-pyridyl)-s-triazine (TPTZ) complexes with iron(II) and ruthenium(III) were prepared. Their sorption and desorption features on silica gel have been investigated. Both complexes were strongly adsorbed. This has been utilized for separating and preconcentrating iron(II) and ruthenium(III) using TPTZ-impregnated silica gel. The chromatographic behavior of TPTZ on silica gel column was examined and found to be effective modifier for silica gel surface. The sorption capacity of silica gel for those metal-triazine complexes has been determined under static conditions and was found to be 5.28 × 10^–3 mM (Fe(TPTZ)₂²⁺) and 2.9 × 10^–3 mM (Ru(TPTZ)₂³⁺). Saturated methanolic solutions of KI or 25% NaClO₄ solutions desorbed both complexes quantitatively from the silica gel surface.     

Rh(III) porphyrins as building blocks for porphyrin coordination arrays: from dimers to heterometallic undecamers

The coordination chemistry of a Rh(III) porphyrin building block was investigated with a view to the construction of heterometallic arrays of porphyrins. The Rh(III) porphyrin was found to coordinate methanol in the solid state and weakly in CDCl(3) solution. Crystallization afforded five coordinate pi stacked Rh(III) porphyrins. The distribution of products from reaction of Rh(III) porphyrin with DABCO, 4,4'-bipyridine, and 4,4'-bipyrimidine could be displaced toward dimeric species by silica gel column chromatography or recrystallization which served to remove excess ligand. Weak coordination to nitriles was observed, although it was sufficiently strong to organize a dimeric complex of 5,5'-dicyano-2,2'-bipyridine in the solid state. Complexes with 4,4'-bipyrimidine and 5,5'-dicyano-2,2'-bipyridine possess uncoordinated chelating nitrogen atoms. Larger heterometallic porphyrin arrays were assembled using a combination of Sn(IV) and Rh(III) porphyrin coordination chemistry. A Sn(IV) porphyrin acted as a core around which were coordinated two isonicotinate groups, carboxylic acid functionalized porphyrins, or porphyrin trimer dendrons. Rh(III) porphyrins were coordinated to pyridyl groups at the periphery of these entities. In this way an eleven porphyrin array, with four different porphyrin metalation states, was assembled. The diamagnetic nature of both the Rh(III) and Sn(IV) porphyrins, the slow ligand exchange kinetics on the NMR time scale, and tight ligand binding permitted the porphyrin arrays to be analyzed by two-dimensional (1)H NMR techniques.     

Use of cerium oxide (CeO(2)) as a packing material for the chromatographic separation of C(60) and C(70) fullerenes

Cerium oxide (CeO₂) was tested as a packing material in liquid chromatography for the separation of C₆₀ and C₇₀ fullerenes. The separation of C₆₀ and C₇₀ fullerenes could be achieved within 20 min by using pure n-hexane as the mobile phase. Furthermore, some higher fullerenes could also be separated in less than 40 min. The peak area was reproducible to a large extent. The separation of fullerenes by liquid chromatography on CeO₂ is shown to be an effective method for their isolation in large amounts. The column efficiency of the CeO₂ column was compared with commercial silica gel and ODS columns. The main advantage of the CeO₂ column is its ability to separate large amounts of fullerenes (C₆₀ and C₇₀) in toluene.     

活性自由基聚合(Iniferter)法制备聚合物包覆硅胶固定相及其色谱性能评价

应用活性自由基聚合法, 在接枝iniferter的硅球表面键合甲基丙烯酸异辛酯-co-乙二醇二甲基丙烯酸酯聚合层, 制备了聚合物包覆硅胶色谱固定相, 并研究了合成条件对于聚合层及分离效果的影响. 在一定聚合时间中, 接枝聚合物质量与反应时间呈线性关系, 并可以在得到聚合物包覆硅胶的基础上, 利用包覆硅胶中的iniferter再次引发接枝聚合, 体现了活性自由基聚合的特点. 聚合物包覆硅胶对于烷基苯同系物、碱性化合物及羟基苯甲酸酯具有很好的色谱分离能力及柱效, 同时, 由于聚合层能够有效地覆盖硅球表面的硅羟基, 减小了碱性化合物的拖尾. 研究工作提供了新的聚合物包覆硅胶固定相的合成方法.     

Solid phase extraction/programmed temperature vaporizer (PTV) injection in GC-analysis of toxaphene and PCBs in aqueous samples

Summary A high-resolution gas-chromatographic (HRGC) method with electron capture detection is described for the sensitive determination of PCBs and toxaphene in water in the lower ng/l range. The required low detection limits are guaranteed by isolation of the target compounds and concentration from the filtered water sample by solid phase extraction with specific C₁₈ silica gel (200–250 m) alone or combined with the injection of larger extract volumes into a programmed temperature vaporizer (PTV) operating in the solvent venting mode. The bonded silica gel was prepared by reaction of the surface silanol groups with octadecyltrichlorosilane. A C₁₈ silica of reproducible coverage was received. Practical aspects of the use of the solid phase extraction in combination with the PTV injection technique are discussed. The recoveries for toxaphene and PCBs were 85 and 78%.     

Silica-immobilized formylsalicylic acid as a selective phase for the extraction of iron(III)

The immobilization of formylsalicylic acid compounds on the surface of amino group-containing silica gel phases is described. The resulting phases were tested for the extraction of iron(III) and showed an exchange capacity of 0.95-0.96 mmol g(-1). The other metal ions tested showed lower metal capacity values than iron(III). The selectivity of the phases tested for the extraction of iron(III) from a mixture containing several other metal ions was evaluated using atomic absorption spectrometry. A method for the recycling of immobilized silica gel after metal extraction is described for practical applications.