A study on radiation sterilization of medical devices in the South of China

In this paper, directing at the peculiarity of south China, the technique and quality control of Co-80 r radiation sterilization of medical devices have been studied. Radiation dose setting is determined by the AAMI method. Experiment shows that radiation treatment has no effect upon the attributes of the products. Under the same condition of packing and environment, storing time of radiation sterilization is 4 times than that of sterilization by heat. Clinical appliances of 1000 carton products show that radiation sterilization products are safe and reliable.     

Studies on the disposable obstetrical dressings sterilized by radiation and the effect of its application

In order to attain an optimum sterilization treatment to obstetric dressings, a new product made by us, with ⁶⁰Coγ-ray, the effects of radiation on standard bacteria pseudomonas aeruginosa ATcc27853, Escherichia coli ATcc25922, Staphylococcus aureus ATcc25923, Clostridium PB6KA, short Bacillus E60163202 and HBSAg were studied. Results showed that at the absorbed dose of 10 kGy, all the bacteria, bacillus and HBSAg were killed off, and sterilized with the dose, the dressings can completely accord with the demands of hygiene, which was further confirmed by microbiological and poisonous tests and the effects of clinical application. In Nov. 1988, the dressings was awarded the excellent prize in the 1st international exhibition of patent, new technique and new equipment in Guangzhou; its effective application is also reported in the paper.     

Studies of radiosterilization and radiation effect on disposable medical products and their packing materials

This report describes the studies of radiation effects in the physical and chemical properties of various disposable medical products, such as catguts, syringes and theirpacking materials; toxic tests on them; sufficient radiation conditions and radiation doses. These studies could provide the basis for production of medical products and quality assurance of radiation sterilization.     

Simultaneous screening and determination eight phthalates in plastic products for food use by sonication-assisted extraction/GC-MS methods

Studies on determination of eight kinds of phthalates, e.g. di-ethyl phthalate (DEP), di-propyl phthalate (DPP), di-isobutyl phthalate (DIBP), di-butyl phthalate (DBP), benzyl butyl phthalate (BBP), di-cyclohexyl phthalate (DCHP), di-(2-ethylhexyl) phthalate (DEHP), di-octyl phthalate (DOP), in 25 kinds of plastic products for food use, including packaging bags, packaging film, containers, boxes for microwave oven use, sucking tubes, spoons, cups, plates, etc. by gas chromatography in combination with mass spectrometry detector (GC-MS) in electronic ionisation mode (EI) with selected-ion monitoring (SIM) acquisition method (GC-MS (EI-SIM)) have been carried out. Methods have been developed for both qualitative and quantitative analysis of phthalates. Extraction, clean-up and analysis procedure have been optimized. Determination of samples were performed after frozen in liquid nitrogen and sonication-assisted extraction with hexane, clean-up with LC-C18 SPE and analyzed by GC-MS methods. The base peak (m/z = 149) of all the phthalates was selected for the screening studies. The characteristic ions, 121, 177, 222 for DEP; 191, 209 for DPP; 57, 223 for DIBP; 104 for DBP; 91, 132, 206 for BBP; 55, 167 for DCHP; 113, 167, 279 for DEHP; 279 for DOP were chosen for quantitative studies. These techniques are possible to detect phthalates at the level of 10.0 μg/kg. Overall recoveries were 82-106% with R.S.D. values at 3.8-10.2%. Only one of the 25 examined samples was free from phthalates. The rest 24 samples were found to contain at least three or more of these phthalates. The predominant phthalate detected in the studied samples was DEHP.     

Comments on the Japanese study of the radiation resistance of the bioburden of medical devices

The findings obtained in an extensive study of the radiation resistance of microbes forming the bioburden of a number of medical devices has been carried out by Takehisa et al. and reported in this number of this Journal. The following paper reviews the expected behaviour of the reported populations under the conditions specified in ISO Standard 11137 Method 1, which is widely used in the determination of the radiation sterilization dose required for sterilization of medical devices. The populations reported for “dry” devices contain a higher proportion of more radiation resistant microbes than that found in the standard distribution of resistance (SDR) that is used for setting the sterilization dose in Method 1. A possible alternative dose setting method for more resistant microbial populations is introduced and discussed.     

On-line ionic liquid-based preconcentration system coupled to flame atomic absorption spectrometry for trace cadmium determination in plastic food packaging materials

A novel on-line preconcentration method based on liquid-liquid (L-L) extraction with room temperature ionic liquids (RTILs) coupled to flame atomic absorption spectrometry (FAAS) was developed for cadmium determination in plastic food packaging materials. The methodology is based on the complexation of Cd with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) reagent after sample digestion followed by extraction of the complex with the RTIL 1-butyl-3-methylimidazolium hexafluorophosphate ([C₄mim][PF₆]). The mixture was loaded into a flow injection analysis (FIA) manifold and the RTIL rich-phase was retained in a microcolumn filled with silica gel. The RTIL rich-phase was then eluted directly into FAAS. A enhancement factor of 35 was achieved with 20 mL of sample. The limit of detection (LOD), obtained as IUPAC recommendation, was 6 ng g⁻¹ and the relative standard deviation (R.S.D.) for 10 replicates at 10 μg L⁻¹ Cd concentration level was 3.9%, calculated at the peak heights. The calibration graph was linear and a correlation coefficient of 0.9998 was achieved. The accuracy of the method was evaluated by both a recovery study and comparison of results with direct determination by electrothermal atomic absorption spectrometry (ETAAS). The method was successfully applied for Cd determination in plastic food packaging materials and Cd concentrations found were in the range of 0.04-10.4 μg g⁻¹.     

The radiation resistance of the bioburden from medical devices

An extensive study of the radiation resistance of microbial species constituting the bioburden of a number of different medical devices obtained from Japanese medical device manufacturers has been carried out. A standard protocol for determining radiation resistance was used and validated at the fourteen centres involved in the study. Individual microbial isolates from the bioburden obtained from seven different devices manufactured in these centres were studied. A total of 3742 unselected isolates were obtained, of which 197 failed to survive long enough for subsequent radiation resistance studies. The remainder were subjected to an initial screen test to identify those organisms that were sensitive to the lethal effects of radiation with a D₁₀ of < 1.5kGy. The 465 isolates that survived the screen doses were then tested for survival in an incremental series of radiation doses using methods similar to those of Whitby (1979) and Yan and Tallentire(1995). The isolates from “dry” devices were more resistant than those obtained from the one water filled (“wet”) device studied. The overall distribution of radiation resistance among the isolates was considered to be similar to that forming the “Standard Distribution of Resistance” (SDR) included in the ISO International Standard 11137 “Sterilization of Health Care Products — Requirements for validation and routine control — Radiation sterilization”.     

Rationale for practical medical device accelerated aging programs in AAMI TIR 17

A Technical Information Report, TIR 17, entitled, “Radiation Sterilization Material Qualification” has been published by the Association for the Advancement of Medical Instrumentation (AAMI) to provide guidance in order to increase the quality and reduce the cost and amount of time required for performing medical device material qualifications. It contains four sections that cover the fundamentals of material selection, processing, testing and accelerated aging programs. The last of these sections, entitled “Accelerating Aging Programs,” provides step-by-step guidance for simple, empirical accelerated programs of use to the medical device industry. The methods are based on van’t Hoff’s observation that the rate of chemical reactions increases by a factor of two for every 10°C increase in temperature, the Q₁₀=2 rule.

With critical patient safety concerns in the medical device industry, it is appropriate for both device manufacturers and regulators to ask if simple, empirical methods such as those outlined in TIR 17 are reasonable and responsible. One reason for confidence in the methods is their success when used in aging environments that are much more severe than those commonly used in the medical device industry. Another reason for confidence in the methods is found from the observation that the working equations of the method can be derived from theory. This paper provides an overview of the thermal accelerated aging theory that forms the basis for the working equations of the accelerated aging programs of TIR 17. Assumptions used are examined and found reasonable; the theoretical foundation is established. While this foundation provides added confidence for the application of the methods of TIR 17 to the medical device industry, it is emphasized that application of the methods within appropriate boundaries is critical. Theoretical boundaries are explained and demonstrated by means of Arrhenius plots, and practical boundaries discussed.     

加速溶剂萃取-气相色谱质谱法测定电子电气产品塑料部件中的多氯化萘

建立了测定电子电气产品塑料部件中的7种多氯化萘(PCNs)化合物的GC/MS法。粉碎后的样品经加速溶剂萃取法(ASE)萃取,并经硅胶小柱净化后,GC/MS法测定。7种多氯化萘的线性范围为：0.01～1.0μg/mL(相关系数R2＞0.999),加标回收率为64.0％～99.0％,相对标准偏差RSD为2.2％～9.9％。     

Independent components analysis coupled with 3D-front-face fluorescence spectroscopy to study the interaction between plastic food packaging and olive oil

Olive oil is one of the most valued sources of fats in the Mediterranean diet. Its storage was generally done using glass or metallic packaging materials. Nowadays, plastic packaging has gained worldwide spread for the storage of olive oil. However, plastics are not inert and interaction phenomena may occur between packaging materials and olive oil. In this study, extra virgin olive oil samples were submitted to accelerated interaction conditions, in contact with polypropylene (PP) and polylactide (PLA) plastic packaging materials. 3D-front-face fluorescence spectroscopy, being a simple, fast and non destructive analytical technique, was used to study this interaction. Independent components analysis (ICA) was used to analyze raw 3D-front-face fluorescence spectra of olive oil. ICA was able to highlight a probable effect of a migration of substances with antioxidant activity. The signals extracted by ICA corresponded to natural olive oil fluorophores (tocopherols and polyphenols) as well as newly formed ones which were tentatively identified as fluorescent oxidation products. Based on the extracted fluorescent signals, olive oil in contact with plastics had slower aging rates in comparison with reference oils. Peroxide and free acidity values validated the results obtained by ICA, related to olive oil oxidation rates. Sorbed olive oil in plastic was also quantified given that this sorption could induce a swelling of the polymer thus promoting migration.     

固相萃取-高效液相色谱法同时测定食品塑料包装材料中9种光稳定剂

建立了同时测定食品塑料包装材料中9种紫外光稳定剂含量的高效液相色谱方法。样品用甲醇-乙酸乙酯混合溶剂超声提取,经固相萃取小柱净化后,以ZORBAX SB-C18柱(250 mm×4.6 mm, 5 μm)为分离色谱柱,甲醇和水为流动相,梯度洗脱,以310 nm为检测波长进行定性、定量分析。该方法前处理简单、易操作,9种紫外光稳定剂分离效果良好。9种紫外光稳定剂在0.2～10 mg/L范围内呈良好的线性关系,线性相关系数大于0.999;方法检出限为0.05～0.1 mg/L;实际样品中的加标回收率为70.2%～89.0%,相对标准偏差为0.4%～4.5%。该方法简单、准确,能够满足食品塑料包装材料中紫外光稳定剂的检测要求。     

Ultra‐high pressure LC for astaxanthin determination in shrimp by‐products and active food packaging

Nowadays, there is increasing interest in natural antioxidants from food by‐products. Astaxanthin is a potent antioxidant and one of the major carotenoids in crustaceans and salmonids. An ultra‐high pressure liquid chromatographic method was developed and validated for the determination of astaxanthin in shrimp by‐products, and its migration from new packaging materials to food simulants was also studied. The method uses an UPLC® BEH guard‐column (2.1 × 5 mm, 1.7 µm particle size) and an UPLC® BEH analytical column (2.1 × 50 mm, 1.7 µm particle size). Chromatographic separation was achieved using a programmed gradient mobile phase consisting of (A) acetonitrile–methanol (containing 0.05 m ammonium acetate)–dichloromethane (75:20:5, v/v/v) and (B) ultrapure water. This method was evaluated with respect to validation parameters such as linearity, precision, limit of detection, limit of quantification and recovery. Low‐density polyethylene films were prepared with different amounts of the lipid fraction of fermented shrimp waste by extrusion, and migration was evaluated into food simulants (isooctane and ethanol 95%, v/v). Migration was not detected under the tested conditions. Copyright © 2012 John Wiley & Sons, Ltd.     

Alpha particle absorption and inclined incidence track parameters evaluation in plastic detectors

In this work the use of our recently constructed irradiation chamber was involved in the current experiments. The absorption of alpha particle in air has been studied through a set of experiments in which the stopping power has been measured. A comparison between the calculated values and the present experimental results is given and a good agreement has been found. Critical angle (θ_c) determination has been carried out using two different techniques, via indirect and direct measurements, under different etching conditions and at various alpha energies. An empirical fit of θ_c−h (h is the removal thickness layer) dependence has been calculated and found to work well in the studied h ranges. Also, the inclined alpha tracks parameters of energies between 1.0 and 5.0 MeV have been studied. Results can be successfully applicable in alpha autoradiography studies and detector efficiency determination for track registration in plastic recorders.     

Development of methods for testing barriers in food packaging materials

In some countries recycled materials are not allowed to come into contact with food without a protective layer such as plastic or virgin fiber. The purpose of this kind of barrier is to reduce migration of substances form beyond the barrier to the food. Two methods for studying a functional barrier are described. Both utilize migration cells in which one surface of the test specimen (for example a paper plate) is exposed to the food simulant. The first method involves the addition of indidcatsor substances to the non-food contact layer. The second method is to measure the migration of substances originally present in the layers beyond the functional barrier layer. Several kinds of barrier used in commercial papaer plates were studied and differences between them were found.     

Analytical method for the simultaneous determination of polyfunctional amines used as monomers in the manufacture of food packaging materials

This paper describes the development of a multi-analyte method for the determination of polyfunctional amines commonly used as monomers in the manufacture of food contact materials. Amines were analyzed by high-performance-liquid chromatography with diode-array detection (HPLC-DAD) after derivatization with dansyl chloride. The chromatographic analysis and the derivatization conditions were optimized. The proposed method was validated in terms of linearity, limits of detection and repeatabilities. The method showed an excellent sensitivity (LOD≤0.05 μg/mL) and appropriate repeatabilites (RSD (n=7)≤5%)). LC-MS/MS was used as a confirmatory technique. The stability of the amines in five food simulants (distilled water, 3% acetic acid, 10% ethanol, 50% ethanol and olive oil) under the most common testing conditions (10 days at 40 °C) was also studied. Results showed that amines had an acceptable stability in aqueous simulants but in the olive oil a loss of 100% was observed for all analytes.     

Applications of nanotechnology in food packaging and food safety: barrier materials, antimicrobials and sensors

In this article, several applications of nanomaterials in food packaging and food safety are reviewed, including: polymer/clay nanocomposites as high barrier packaging materials, silver nanoparticles as potent antimicrobial agents, and nanosensors and nanomaterial-based assays for the detection of food-relevant analytes (gasses, small organic molecules and food-borne pathogens). In addition to covering the technical aspects of these topics, the current commercial status and understanding of health implications of these technologies are also discussed. These applications were chosen because they do not involve direct addition of nanoparticles to consumed foods, and thus are more likely to be marketed to the public in the short term.     

The origins of volatile oxidation products in the thermal degradation of polypropylene, identified by selective isotopic labeling

Making use of polypropylene samples that are selectively labeled with carbon-13 at each of the three unique positions within the repeating unit, we are conducting mass spectral analyses of the volatile organic oxidation products that are produced when the polymer is subjected to elevated temperature in the presence of air. By examination of both the parent and fragmentation ion peaks in the mass spectrum, we are able to identify the positioning of the C-13 labels within the volatile compounds, and thereby map each compound onto its site of origin from within the macromolecular structure of polypropylene. Most of the organic oxidation products are remarkably specific in terms of their genesis from the polymer. The structural results are discussed in terms of the oxidation chemistry of the macromolecule.     

Experiences using IAEA Code of practice for radiation sterilization of tissue allografts: Validation and routine control

Problems of tissue allografts in using International Standard (ISO) 11137 for validation of radiation sterilization dose (RSD) are limited and low numbers of uniform samples per production batch, those are products obtained from one donor. Allograft is a graft transplanted between two different individuals of the same species. The minimum number of uniform samples needed for verification dose (VD) experiment at the selected sterility assurance level (SAL) per production batch according to the IAEA Code is 20, i.e., 10 for bio-burden determination and the remaining 10 for sterilization test. Three methods of the IAEA Code have been used for validation of RSD, i.e., method A1 that is a modification of method 1 of ISO 11137:1995, method B (ISO 13409:1996), and method C (AAMI TIR 27:2001). This paper describes VD experiments using uniform products obtained from one cadaver donor, i.e., cancellous bones, demineralized bone powders and amnion grafts from one life donor. Results of the verification dose experiments show that RSD is 15.4 kGy for cancellous and demineralized bone grafts and 19.2 kGy for amnion grafts according to method A1 and 25 kGy according to methods B and C.     

Depth-dose profiles in continuous and discontinuous materials of food products and medical devices irradiated by 10 MeV electron beam

Journal of Radioanalytical and Nuclear Chemistry - Depth-dose profiles of electron radiation in continuous and discontinuous materials of water, plastic and food-like dummy irradiated by 10 MeV...