A 3D Iodoplumbate Semiconducting Open Framework with Visible‐light‐induced Photocatalytic Performance

Employing in situ N‐alkylation of the conjugated compound 9,10‐bis(4‐pyridyl)anthracene (bpanth) as structure‐directing agent, a 3D inorganic‐organic hybrid iodoplumbate, [Me₂(bpanth)][Pb₄I₁₀] ( 1 ), was solvothermally prepared. The in situ N‐alkylation of bpanth with alcohols was investigated. 1 features a novel 3D open framework based on an interesting Pb₆I₂₄ cluster. UV/Vis spectroscopy analyses indicate that 1 is a potential semiconductor material with a narrow energy gap of 2.06 eV. It exhibits good catalytic activity in the visible‐light‐drived degradation of an organic dye. This work further illustrates that introducing conjugated organic molecules as templates is conducive to achieving semiconducting hybrid halometallates with narrow band gaps.     

In situ Alkylation of 4,4′‐Vinylenedipyridine for Inorganic‐Organic Iodides/Iodidomercurates

Solvothermal reactions of HgI₂, 4,4′‐vinylenedipyridine, and HI in alcoholic solution (methanol, ethanol, or pentanol) gave rise to a family of organic‐inorganic hybrid complexes, formulated as [C₁₄H₁₆N₂][I₄]^2– ( 1 ), [C₁₆H₂₀N₂][HgI₄] ( 2 ), and [C₂₂H₃₂N₂][HgI₄]₄ ( 3 ). Single‐crystal X‐ray diffraction reveals that all three compounds are discrete structures, including the inorganic anion [I₄]^2– or [HgI₄]^2– and an organic cation, where the resulting organic cations were generated in situ alkylation reactions of 4,4′‐vinylenedipyridine with alcohols, with cleavage of the alcoholic C–O bond followed by a one‐step in situ N‐alkylation reaction of 4,4′‐vinylenedipyridine in acidic HI solution. X‐ray powder diffraction (XRD), ¹H NMR and ¹³C NMR, energy‐dispersive X‐ray (EDS), IR, as well as UV/Vis/NIR spectroscopy, elemental analysis, and thermogravimetric analysis (TGA) were used to characterize the complexes.     

Environmental sources and sinks of alkyllead compounds

Evidence is presented in favour of a natural environmental alkylation process as a source of atmospheric vapour-phase alkyllead. Several species of marine flora have been cultured under laboratory conditions with added doses of inorganic lead, and production of alkyllead, predominantly trimethyllead (Me₃Pb⁺), has been measured. Atmospheric concentrations and ratios of alkyl and inorganic lead at urban, rural and remote sites suggest that differential decay and deposition processes for different species, together with an environmental alkylation source, may explain enhanced ratios of total alkyllead/total lead in maritime air masses.     

Merging Regiodivergent Catalysis with Atom‐Economical Radical Arylation

A titanocene‐catalyzed regiodivergent radical arylation is described that allows access to either enantiomerically pure tetrahydroquinolines or indolines from a common starting material. The regioselectivity of epoxide opening that results in the high selectivity of heterocycle formation is controlled by two factors, the absolute configuration of the enantiopure ligands of the (C₅H₄R)₂TiX₂ catalyst and the inorganic ligand X (X=Cl, OTs). The overall reaction is atom‐economical and constitutes a radical Friedel–Crafts alkylation.     

The mechanism of N-alkylation of weak N-H-acids by phase transfer catalysis

The alkylation of aromatic amines in the presence of inorganic bases is accelerated by a PT catalyst $\text{even}$ if KHCO₃ is the base. ArNR^θ ions seem not to be involved. A novel type of mechanism for a PTC process is proposed.     

The “Borrowing Hydrogen Strategy” by Supported Ruthenium Hydroxide Catalysts: Synthetic Scope of Symmetrically and Unsymmetrically Substituted Amines

The N‐alkylation of ammonia (or its surrogates, such as urea, NH₄HCO₃, and (NH₄)₂CO₃) and amines with alcohols, including primary and secondary alcohols, was efficiently promoted under anaerobic conditions by the easily prepared and inexpensive supported ruthenium hydroxide catalyst Ru(OH)_x/TiO₂. Various types of symmetrically and unsymmetrically substituted “tertiary” amines could be synthesized by the N‐alkylation of ammonia (or its surrogates) and amines with “primary” alcohols. On the other hand, the N‐alkylation of ammonia surrogates (i.e., urea and NH₄HCO₃) with “secondary” alcohols selectively produced the corresponding symmetrically substituted “secondary” amines, even in the presence of excess amounts of alcohols, which is likely due to the steric hindrance of the secondary alcohols and/or secondary amines produced. Under aerobic conditions, nitriles could be synthesized directly from alcohols and ammonia surrogates. The observed catalysis for the present N‐alkylation reactions was intrinsically heterogeneous, and the retrieved catalyst could be reused without any significant loss of catalytic performance. The present catalytic transformation would proceed through consecutive N‐alkylation reactions, in which alcohols act as alkylating reagents. On the basis of deuterium‐labeling experiments, the formation of the ruthenium dihydride species is suggested during the N‐alkylation reactions.     

H3PW12O40/mpg‐C3N4 as an efficient and reusable catalyst in the alkylation of o‐xylene and styrene

A heterogeneous catalyst (HPW/mpg‐C₃N₄) for the alkylation of o‐xylene and styrene reaction was acquired by the immobilization of phosphotungstic acid (HPW) on mesoporous graphitic carbon nitride (mpg‐C₃N₄) through electrostatic interaction. The results of Fourier transform infrared spectroscopy (FT‐IR), X‐ray powder diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA) proved that HPW was successfully immobilized on the protonated mpg‐C₃N₄ by electrostatic interaction. The textural properties and morphology of HPW/mpg‐C₃N₄ were characterized by N₂ adsorption–desorption, scanning electron microscopy (SEM). Among them, 40% HPW/mpg‐C₃N₄ displays the best catalytic performance in the alkylation reaction with 91.8% yield and 96.5% selectivity to 1, 2‐diphenylethylane. Moreover, protonated mpg‐C₃N₄ not only displays as a support to facilitate great dispersion of HPW but also promotes the alkylation product diffusion effectively. Besides, the HPW/mpg‐C₃N₄ catalyst could be recycled easily without significant loss of catalytic activity, which is demonstrate by the recyclability of HPW/mpg‐C₃N₄ catalyst test.     

Alkylation of 5-substituted tetrazoles with mannich bases

Mixtures of N(₁) and N(₂) isomers are formed in the alkylation of 1H-5-R-tetrazoles with N-(2-hydroxy-3-methoxy-5-formylbenzyl)piperidine, whereas primarily one of two possible N(₁) or N(₂) isomers is formed in the case of alkylation with N-(3,5-di-methyl-4-hydroxybenzyl)piperidine, depending on substituent R.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 851–853, June, 1984.     

吡啶离子液体催化作用下的FCC汽油烷基化脱硫

合成一种Brønsted酸性离子液体[BPY]HSO₄,采用红外光谱和核磁共振对其进行表征。以[BPY]HSO₄为催化剂,对FCC汽油进行烷基化脱硫,考察反应温度、反应时间和剂油质量比对脱硫效果的影响及脱硫前后FCC汽油性质的变化,并对[BPY]HSO₄进行了再生。结果表明,在反应温度为65 ℃、反应时间为90 min和剂油质量比为0.09的条件下,FCC汽油的硫含量从580.0 μg/g降至6.4 μg/g,脱硫率为98.90%,满足中国国Ⅴ车用汽油硫含量标准(<10 μg/g);脱硫前后硫分布变化表明,在[BPY]HSO₄的催化作用下,前170 ℃馏分油中硫化物大部分转移到后170 ℃重馏分中,重馏分中硫化物可采用加氢方法进行脱除;PONA组成变化表明,烷基化脱硫过程对FCC汽油的烃类组成影响较小,且脱硫前后辛烷值变化不大;[BPY]HSO₄经萃取再生后可循环使用。     

Synthesis of polyisobutylene with arylamino terminal group by combination of cationic polymerization with alkylation

The controlled cationic polymerization of isobutylene (IB) initiated by H₂O as initiator and TiCl₄ as coinitiator was carried out in n‐Hexane/CH₂Cl₂ (60/40, v/v) mixture at −40 °C in the presence of N,N‐dimethylacetamide (DMA). Polyisobutylene (PIB) with nearly theoretical molecular weight (M_n = 1.0 × 10⁴ g/mol), polydispersity (M_w/M_n) of 1.5 and high content (87.3%) of reactive end groups (tert‐Chlorine and α‐double bond) was obtained. The Friedel‐Crafts alkylation of triphenylamine (TPA) with the above reactive PIB was further conducted at different reactions, such as [TPA]/[PIB], solvent polarity, alkylation temperature, and time. The resultant PIBs with arylamino terminal group were characterized by ¹H NMR, UV, and GPC with RI/UV dual detectors. The experimental results indicate that alkylation efficiency (A_eff) increased with increases in [TPA]/[PIB], reaction temperature, and reaction time and with a decrease in solvent polarity. The alkylation efficiency could reach 81.0% at 60/40(v/v) mixture of n‐Hex/CH₂Cl₂ with [TPA]/[PIB] of 4.49 at 50 °C for 54 h. Interestingly, the synthesis of PIB with arylamino terminal group could also be achieved in one pot by combination of the cationic polymerization of IB initiated by H₂O/TiCl₄/DMA system with the successive alkylation by further introduction of TPA. Mono‐, di‐ or tri‐alkylation occurred experimentally with different molar ratio of [TPA]/[PIB]. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 936–946, 2008     

Functionalization of Quinazolin‐4‐ones Part 1: Synthesis of Novel 7‐Substituted‐2‐thioxo Quinazolin‐4‐ones from 4‐Substituted‐2‐Aminobenzoic Acids and PPh3(SCN)2

4‐(Nitro, amino, acetylamino)‐2‐aminobenzoic acid were allowed to react with PPh₃(SCN)₂ and gave the crossholding 7‐nitro, 7‐acetylamino‐ and 7‐amino‐2‐thioxo quinazolin‐4‐ones respectively. The nature of the substituent at position 4 of the 2‐aminobenzoic acids has significant influence on the outcome of the cyclisation reaction with PPh₃(SCN)₂. Similarly, the nature of the substituent at position 7 of the 2‐substituted quinazolin‐4‐ones significantly affected the ease with which alkylation reactions could be performed. The alkylation selectivity of the 7‐ substiuted‐2‐thioxo quinazolin‐4‐ones was found to depend on the nature of the alkyl halide and the nature of the substituent at position 2.     

On the Alkylation of 5-Fluorouracil-Some Recent Findings

Since its discovery 5-fluorouracil ¹(1,5-FU), an important anticancer drug, has been the subject of study for the preparation of some suitable derivatives² which may have better therapeutic efficacy. These are prepared through silylation method³, mercuri salt method⁴ and direct alkylation method⁵ of 5-FU. It was reported⁵ that the direct alkylation of 5-FU with saturated and allylic type halides under controlled conditions occur at N₃ (3-) and N₁ (1-) position respectively in contrast to alkylation of uracil where N₁ alkylated products are obtained in both cases. The position of alkylation in 5-FU was determined, with analogy from uracil⁶, by the bathochromic shift in UV from the neutral pH to alkaline pH of the 3-substituted product compared to no such shift of the 1-substituted product.     

硫酸亚铈催化的芳香化合物与苄基醇、烯丙醇类化合物以及苄基氯的傅-克烷基化反应研究

硫酸亚铈作为一种便宜的和有效的催化剂催化芳香化合物与苄基醇、烯丙醇类化合物和苄基氯的傅-克烷基化反应. 在1～10 mol%的硫酸亚铈存在下, 芳香化合物分别与苄基醇、烯丙醇类化合物和苄基氯能够顺利有效地进行傅-克烷基化反应. 此外, 催化剂能回收, 再次使用三次也没有明显地失去催化活性.     

Facile Synthesis of 2‐Alkylthio‐3‐alkyl‐5‐phenylmethylidene‐4H‐imidazol‐4‐ones

2‐Alkylthio‐3‐alkyl‐5‐phenylmethylidene‐4H‐imidazol‐4‐ones 6 were synthesized by N‐alkylation and S‐alkylation of 2‐thioxo‐5‐phenylmethylidene‐4‐imidazolidinone 5, which was obtained via cyclization of vinyl isothiocyanate 4 with excess ammonium hydroxide (28% NH₃ in water).     

Catalysis and deactivation of SO 4 2− /ZrO2 solid acid on the alkylation of benzene with 1-dodecene

Catalysis and deactivation of SO₄²⁻/ZrO₂ solid acid on the alkylation of benzene and 1-dodecene were studied by the characterization of XRD, BET, IR, TG/DTA, and NH₃-TPD techniques and the determination of the 1-dodecene conversion, the yield of dodecylbenzene and the selectivity of linear alkylbenzene respectively. In addition, some treatment methods, such as the extraction with benzene or THF as solvent, and the calcinations with or without the dipping of H₂SO₄ in air, were respectively used to recover the activity of deactivated catalyst. The results indicate that SO₄²⁻/ZrO₂ solid acid shows higher catalytic activity for the alkylation of benzene and 1-dodecene with nearly 100% of 1-dodecene conversion and more than 80% of dodecylbenzene yield, and higher selectivity of 2-LAB. The activity of catalyst for the alkylation of benzene is in proportion to the content and the strength of medium acid site. However, the distinct deactivation of catalyst was also obversed in the alkylation. According to the characterization of deactivated catalyst, the accumulation of hydrocarbon fragment and the removal of are mainly reasons of SO₄²⁻/ZrO₂ deactivation. The SO₄²⁻/ZrO₂ calcinated at higher temperature is apt to deactivate. The treatment by extraction with solvent or calcinations can recover the catalytic activity of spent catalyst at a certain extent, especially calcination with the dipping of H₂SO₄. Published in Russian in Kinetika i Kataliz, 2009, Vol. 50, No. 3, pp. 455–463. The article is published in the original.     

Use of Trifluoromethyl Groups for Catalytic Benzylation and Alkylation with Subsequent Hydrodefluorination

The electrophilic organofluorophosphonium catalyst [(C₆F₅)₃PF][B(C₆F₅)₄] is shown to effect benzylation or alkylation by aryl and alkyl CF₃ groups with subsequent hydrodefluorination, thus resulting in a net transformation of CF₃ into CH₂–aryl fragments. In the case of alkyl CF₃ groups, Friedel–Crafts alkylation by the difluorocarbocation proceeded without cation rearrangement, in contrast to the corresponding reactions of alkyl monofluorides.     

Effect of Inorganic Components on Thermal Stability of Methylsiloxane-Based Inorganic/Orgnaic Hybrids

The thermal decomposition behavior of methylsiloxane-based inorganic/organic hybrids containing an inorganic component derived from metal alkoxides such as Si(OCH₃)₄, Al(O^sC₄H₉)₃, Ti(OⁱC₃H₇)₄ and Nb(OC₂H₅)₅ was investigated by means of thermogravimetric and differential thermal analysis (TG-DTA), Fourier transform infrared (FT-IR) spectroscopy and nuclear magnetic resonance (NMR) spectroscopy. The decomposition temperature of methyl groups in methylsiloxane-based inorganic/organic hybrids containing an inorganic component derived from metal alkoxides was higher than that in the methylsiloxane-based inorganic/organic hybrid prepared from only CH₃Si(OC₂H₅)₃. In particular, when incorporating Nb and Ti inorganic components, methyl groups in methylsiloxane-based inorganic/organic hybrids decomposed at about 100 and 200^∘C higher temperatures, respectively, than those in the methylsiloxane-based inorganic/organic hybrid prepared from only CH₃Si(OC₂H₅)₃. The incorporation of an inorganic component other than siloxane into methylsiloxane-based inorganic/organic hybrids was found to thermally stabilize the methyl groups of methylsiloxane networks.     

Chlorogallate(III) ionic liquids: Synthesis, acidity determination and their catalytic performances for isobutane alkylation

A series of triethylammonium-based chlorogallate(Ⅲ) ionic liquids with varied Lewis acidity was synthesized, characterized, and firstly applied to isobutane alkylation. The [Et3NHCl]-GaCl3 with χGaCl3 = 0.65 displayed a potential catalytic activity for the alkylation. The addition of copper halide into the chlorogallate(Ⅲ) ionic liquids dramatically enhanced the alkylation reaction. Up to 70.1% C8 selectivity and 91.3 RON were achieved with the [Et3NHCl]-GaCl3-CuCl (χGaCl3 = 0.65, CuCl = 5% mol) under 0.5 MPa, 900 r/min, 15 min, 288 K using the industrial C4 cut (isobutane/butene = 10). These results indicate that the chlorogallate(Ⅲ) system may be used as a promising catalyst for the C4 alkylation.     

Kinetic studies of hydrazine and 2‐hydroxyethylhydrazine alkylation by 2‐chloroethanol: Influence of a strong base in the medium

To optimize yields, the study of reaction kinetics related to the synthesis of 2‐hydroxyethylhydrazine (HEH) obtained from the alkylation of N₂H₄ by 2‐chloroethanol (CletOH) was carried out with and without sodium hydroxide. In both cases, the main reaction of HEH formation was followed by a consecutive, parallel reaction of HEH alkylation (or dialkylation of N₂H₄), leading to the formation of two isomers: 1,1‐di(hydroxyethyl)hydrazine and 1,2‐di(hydroxyethyl)hydrazine. In this study, hydrazine and hydroxyalkylhydrazine alkylations followed S_N2 reactions triggered directly by CletOH or indirectly in the presence of a strong base by ethylene oxide, an intermediate compound. The kinetics was studied in diluted mediums by quantifying HEH and CletOH by gas chromatography and gas chromatography coupled with mass spectrometry (GC‐MS). The activation parameters of each reaction and the influence of a strong base present in the medium on the reaction mechanisms were established. A global mathematical treatment was applied for each alternative. It allowed modeling the reactions as a function of reagent concentrations and temperature. In the case of direct alkylation by CletOH, simulation was established for semi‐batch and batch syntheses and was confirmed in experiments for concentrated mediums (1.0 M ≤ [CletOH]₀ ≤ 3.2 M and 15.7 M ≤ [N₂H₄]₀ ≤ 18.8 M). Simulation therefore permits the prediction of the instantaneous concentration of reagents and products, in particular ethylene oxide concentration in the case of indirect alkylation, which must be as weak as possible. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 41: 382–393, 2009     

TG-MS analysis for studying the effects of fire retardants on the pyrolysis of pine-needles and their components

Thermogravimetry-mass spectrometry (TG-MS) was used to study the effect of the inorganic salts (NH₄)₂SO₄ and (NH₄)₂HPO₄, active substances of many commercial forest fire retardants, on the pyrolysis of Pinus halepensis needles and their main components (cellulose, lignin and extractives). These salts seemed to affect the pyrolysis of cellulose by increasing significantly the char residue, decreasing the pyrolysis temperature and changing the composition of the evolved gases, that is, increasing levoglucosenone and decreasing oxygen containing volatile products. (NH₄)₂SO₄ seemed to have negligible effect on the pyrolysis of lignin, while (NH₄)₂HPO₄ increased the char residue and decrease the relative contribution of guaiacols in the evolved gases. No effects of the inorganic salts on the extractives were observed. Finally, the inorganic salts seemed to affect the pyrolysis of pine-needles, mainly the cellulose component, but the effects were not as intense as in the pyrolysis of cellulose.