静电纺丝制备图案化无机纳米纤维

静电纺丝技术近几年在制备纳米纤维领域得到了广泛的应用,被认为是批量制备纳米纤维材料最简单有效的方法。本文综述了近几年高压静电纺丝技术制备图案化无机物纳米纤维的纺丝装置和过程,特别详细综述了纺丝过程中纤维直径的变化,利用带电流体动力学(EHD)理论推导出纤维直径变化的运动方程,并对方程进行一定程度的修订,以符合电纺无机物纳米纤维直径的变化;并综述了取向纳米纤维、中空纳米纤维、壳-核结构纳米纤维、纳米线、纳米带、纳米管及多层次结构纳米纤维的构建及其基本性能。最后对电纺制备图案化无机纳米纤维未来发展方向,特别是功能化多层次结构电纺无机纳米纤维制备进行了展望。     

较细ZnS:Mn/PVP纳米纤维的制备及表征

采用静电纺丝的方法制备了ZnS:Mn/Polyvinylpyrrolidone复合纳米纤维.使用的溶剂为水、乙醇及DMF(N,N-Dimediylfommnide),的使用有助于制备较细的纤维,电纺溶液中随着聚合物PVP浓度降低,纤维的直径变小,当PVP质量分数为6.6%时,纤维的直径是80 nm,通过荧光显微镜和荧光...     

静电纺丝法制备多壁碳纳米管/聚乙烯醇复合纤维的综合实验设计

设计了静电纺丝法制备多壁碳纳米管/聚乙烯醇复合纤维综合实验。该实验对纺丝浓度、纺丝电压、接收距离、接收面积、多壁碳纳米管的改性及其添加量对复合纤维形貌的影响进行研究,对纤维进行了红外光谱、扫描电镜测试分析,得到优化的静电纺丝制备多壁碳纳米管/聚乙烯醇复合纤维的电纺工艺。该实验易于分组操作,涉及高分子材料的改性、制备、形貌表征和结果分析等多方面内容,有利于学生巩固理论知识,提高实践能力和综合应用能力。     

静电纺丝法和气流-静电纺丝法制备聚砜纳米纤维

应用电纺法制备了聚砜纳米纤维.设计了一种新型的气流静电纺丝装置,其特点是在喷丝头上添加了喷气组件.电纺过程中所用聚砜的特性粘数为0.97dLg,溶剂为二甲基乙酰胺,载气为氮气.研究了聚砜纳米纤维的平均直径与过程参数之间的关系.研究表明影响聚砜纳米纤维的平均直径的主要因素为电压、纺丝液的流速、喷丝头与收集器之间的距离、操作温度以及纺丝液的性质(如粘度、表面张力和电导率).纳米纤维的平均直径和直径分布用扫描电镜表征.应用这种气流静电纺丝法制备的纳米纤维的直径范围是50～500nm.所得纳米纤维的直径依赖于电压、喷丝头与收集器之间的距离以及喷丝液的浓度.结果表明,采用气流静电纺丝不仅能制备较细而且均匀的纳米纤维,而且产量更高.     

静电纺丝法制备聚甲醛纳米纤维

以六氟异丙醇为溶剂, 用静电纺丝的方法制备了聚甲醛纳米纤维. 利用场发射扫描电镜对纤维形貌进行了表征, 纤维的直径为0.3~1.2 μm. 讨论了溶液浓度、接收距离、电压和温度等纺丝参数对纤维形貌的影响. 用DSC方法对电纺纤维膜的结晶性能进行了研究, 并与溶液浇铸膜的进行了比较. 结果表明, 电纺纤维膜的熔点与溶液浇铸膜的相同, 与溶液的浓度无关, 但结晶度比溶液浇铸膜的低. 力学性能用拉伸试验进行了测试, 观察到很长的断裂伸长率.     

较细ZnS:Mn/PVP纳米纤维的制备及表征

采用静电纺丝的方法制备了ZnS:Mn/Polyvinylpyrrolidone复合纳米纤维.使用的溶剂为水、乙醇及DMF(N,N-Dimediylfommnide),的使用有助于制备较细的纤维,电纺溶液中随着聚合物PVP浓度降低,纤维的直径变小,当PVP质量分数为6.6%时,纤维的直径是80 nm,通过荧光显微镜和荧光光谱仪的测试可以知道,该纤维能够发光.基于纤维的发光及直径较小的特性,该纤维在一维纳米光电子领域有着潜在的应用.     

熔体静电纺丝研究进展

静电纺丝法是制备超细/纳米纤维的一种有效方法。相对于研究已经较为深入广泛的溶液电纺,熔体电纺还处于研究的初级阶段。但其原料适用性广、无毒无污染及产品转化率高等特点,使其在过滤、生物医药等领域有着广阔的应用前景。同时,熔体电纺也存在装置较复杂、纤维直径较粗等缺陷。本文介绍了目前熔体电纺的各典型装置,总结了用于熔体电纺的聚合物种类、实验工艺,比较了各种聚合物纺丝过程中的参数对纤维物化性质的影响,探讨了熔体电纺纤维的应用,并对其发展方向进行了预测和展望。     

电纺聚氧化乙烯纤维的分散形态和结晶行为研究

将聚氧化乙烯(PEO)水溶液在不同的工艺条件下进行电纺,制备了PEO纤维.用SEM研究了纤维的分散形态;用DSC和XRD研究了纤维的结晶性能.电纺纤维分散形态是由浓度、电压、固化距离等因素综合作用的结果.其中,浓度是最关键的因素.降低溶液浓度,提高静电压和增加固化距离均会使纤维变细.电纺得到的纤维与原粉相比,电纺使纤维结晶度下降,理论上分析了可能的机理.     

溶剂性质对两亲性聚肽静电纺丝的影响

通过对聚(γ-苄基L-谷氨酸酯)(PBLG)的亲水改性制备了两亲性聚(γ-苄基L-谷氨酸酯-co-羟乙谷酰胺)无规共聚肽(PBHG)用于静电纺丝制备超细纤维.通过傅里叶变换红外光谱、核磁共振氢谱表征了聚合物结构.通过测定溶液表面张力、黏度、电导率及扫描电镜观察纤维形貌考察了不同溶剂及PBHG浓度对纺丝溶液性质及电纺纤维的影响.通过水浸实验及MTT法评价了电纺纤维膜的亲水性及细胞相容性.研究发现在三氯甲烷(TCM)和四氢呋喃(THF)中PBHG采取α-螺旋构象,刚性分子链自取向排列,可获得直径为微米或亚微米的电纺纤维.以TCM为溶剂时,因溶液表面张力大、导电率低导致纤维品质较差,而以THF为溶剂可获得表面光洁、尺寸均匀的电纺纤维.当溶剂为三氟乙酸(TFA)时,PBHG采取无规线团构象,柔性分子链彼此缠结,同时溶液表面张力小、黏度低、电导率高,可获得纳米电纺纤维.但因TFA挥发性相对较差,易造成纤维粘连.将TFA与TCM复配后作为溶剂可改善纤维粘连问题.与PBLG电纺纤维相比,改性后的PBHG电纺纤维的亲水性得到了改善,可在水中保持纤维骨架而无需交联,并表现出良好的细胞相容性,能促进细胞在电纺纤维膜上的增殖.     

刺激响应性电纺纳米纤维

采用静电纺丝法制备的、平均直径通常小于1000 nm的刺激响应性电纺纳米纤维是一种可响应外界刺激而发生物理化学性能改变的智能聚合物纤维,由它形成的纤维膜具有比表面积大、孔隙率高、对外界刺激产生响应速度快等优点,因此在诸多领域显示出诱人的应用前景,是近年来受到国内外高度关注的一种智能纳米材料。本文首先归纳了制备刺激响应性电纺纳米纤维的三种方法。然后从成纤聚合物的合成或选用、纺丝液配制、静电纺丝和后处理4个方面讨论了制备过程中影响纳米纤维尺寸、结构和刺激响应性等性能的主要因素。接下来重点述评了除电场外的其他各种刺激响应性电纺纳米纤维的设计及其构建研究进展,另外介绍了这些刺激响应性电纺纳米纤维膜在分离与纯化、药物控制释放、伤口敷料、细胞培养、传感器与检测等方面的应用研究情况。最后,就它们的未来研究方向进行了展望。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.