Dielectrophoretic manipulation of fluorescing single-walled carbon nanotubes

We investigate the behavior of fluorescing single-walled carbon nanotubes (SWCNTs) under dielectrophoretic conditions and demonstrate their collection with fluorescence microscopy. SWCNTs are dispersed in water with the aid of a nonionic surfactant, Triton X-100, and labeled through noncovalent binding with the dye 3,3'-dihexyloxacarbocyanine iodide (diOC(6)). The chromophore's affinity to the SWCNTs is due to pi-stacking interactions. Carbon nanotube (CNT) localization is clearly identified on the fluorescence images, showing that the nanotubes concentrate between the electrodes and align along the electric field lines.     

Kinetics of PL quenching during single-walled carbon nanotube rebundling and diameter-dependent surfactant interactions

The kinetics of single-walled carbon nanotube rebundling have been investigated by photoluminescence (PL) spectroscopy. The rate of loss of PL intensity was measured for 12 different nanotubes in three common aqueous surfactants (sodium dodecyl sulfate, SDS; sodium dodecylbenzene sulfonate, SDBS; and sodium cholate, SC) as the surfactant suspensions were diluted to promote nanotube rebundling, quenching of semiconductor nanotube PL, and precipitation. The rate of PL decay was first-order in the concentration of isolated nanotubes, as expected if surfactant desorption is rate-limiting in the rebundling process. Temperature-dependent measurements permitted an Arrhenius analysis from which diameter-dependent activation energies were determined. SDS was found to have very strong diameter dependence for activation energy, with stronger binding to smaller-diameter nanotubes, whereas SDBS displayed a weaker diameter dependence. SC was found to bind strongly to certain nanotubes and weakly to the (10,2) nanotube. The PL emission red shifted with time after dilution as surfactant desorption proceeded. This effect is attributed to an increase in the micropolarity at the nanotube surface.     

Role of adsorbed surfactant in the reaction of aryl diazonium salts with single-walled carbon nanotubes

Because covalent chemistry can diminish the optical and electronic properties of single-walled carbon nanotubes (SWCNTs), there is significant interest in developing methods of controllably functionalizing the nanotube sidewall. To date, most attempts at obtaining such control have focused on reaction stoichiometry or strength of oxidative treatment. Here, we examine the role of surfactants in the chemical modification of single-walled carbon nanotubes with aryl diazonium salts. The adsorbed surfactant layer is shown to affect the diazonium derivatization of carbon nanotubes in several ways, including electrostatic attraction or repulsion, steric exclusion, and direct chemical modification of the diazonium reactant. Electrostatic effects are most pronounced in the cases of anionic sodium dodecyl sulfate and cationic cetyltrimethylammonium bromide, where differences in surfactant charge can significantly affect the ability of the diazonium ion to access the SWCNT surface. For bile salt surfactants, with the exception of sodium cholate, we find that the surfactant wraps tightly enough such that exclusion effects are dominant. Here, sodium taurocholate exhibits almost no reactivity under the explored reaction conditions, while for sodium deoxycholate and sodium taurodeoxycholate, we show that the greatest extent of reaction is observed among a small population of nanotube species, with diameters between 0.88 and 0.92 nm. The anomalous reaction of nanotubes in this diameter range seems to imply that the surfactant is less effective at coating these species, resulting in a reduced surface coverage on the nanotube. Contrary to the other bile salts studied, sodium cholate enables high selectivity toward metallic species and small band gap semiconductors, which is attributed to surfactant-diazonium coupling to form highly reactive diazoesters. Further, it is found that the rigidity of anionic surfactants can significantly influence the ability of the surfactant layer to stabilize the diazonium ion near the nanotube surface. Such Coulombic and surfactant packing effects offer promise toward employing surfactants to controllably functionalize carbon nanotubes.     

Controlling the electrophoretic mobility of single-walled carbon nanotubes: a comparison of theory and experiment

The electrophoretic mobilities of single-walled carbon nanotubes (SWNTs) in agarose gels subjected to negatively charged covalent functionalization and noncovalent anionic surfactant adsorption are compared using a simplified hydrodynamic model. Net charges are calculated on the basis of estimated friction coefficients for cylindrical rodlike particles. The effects of functionalization with negatively charged 4-hydroxybenzene diazonium and anionic sodium cholate are quantified and compared with model predictions. The adsorption of Na+ counterions into the nonionic surfactant layer adsorbed on SWNTs (Triton-X-405) is shown to induce a positive charge and reverse the mobility under select conditions. This effect has not been identified or quantified for nanoparticle systems and may be important in the processing of these systems.     

NEXAFS光谱分析聚合物修饰的单壁碳纳米管

利用C1s、O1s、N1s近边X射线吸收精细结构(Near Edge X-Ray Absorption Fine Structure,NEXAFS)光谱对聚合物修饰的碳纳米管进行了分析,研究了氧化及偶联聚合物对碳纳米管结构的影响。氧化碳纳米管及十八胺修饰的、聚合物/十八胺双修饰的碳纳米管的NEXAFS光谱均出现了碳/氧K边π*(C=O)和σ*(C-O)共振峰;而十八胺修饰的、聚合物/十八胺双修饰的碳纳米管则出现了氮K边π*(N-C=O)和σ*(N1s)共振峰。分析表明,NEXAFS光谱可有效表征聚合物修饰的碳纳米管。     

Electrical transport characteristics of surface-conductance-controlled, dielectrophoretically separated single-walled carbon nanotubes

Alternating current dielectrophoresis has attracted considerable attention as a possible candidate to separate single-walled carbon nanotubes according to electronic types. Recently, the significant effect of surface charge on the polarizability of semiconducting nanotubes was demonstrated using comparative Raman spectroscopic studies. Here we present electrical transport characteristics of surface-charge-controlled, dielectrophoretically deposited nanotube arrays. The surface charge was controlled using cationic/anionic surfactant mixtures. Complete separation between metallic and semiconducting species was achieved at the electric field frequency of 10 MHz only when the surface charge of nanotubes was neutralized, which is consistent with previous Raman investigation. A theoretical analysis, using zeta potential information as input, further supported the experimental observation.     

High-speed countercurrent chromatography for purification of single-walled carbon nanotubes

A new chromatographic purification of single-walled carbon nanotubes using high-speed countercurrent chromatography is reported. The purification was accomplished on the basis of experiment that dispersed the single-walled carbon nanotubes with sodium dodecyl sulfate, and the result mixture was separated using the two phase system composed of n-butanol/water = 1/1 （v/v）. The sizes of SWNTs separated were observed by scanning electron microscopy. The results demonstrated that the high-speed countercurrent chromatography possessed a good efficency for purification of single-walled carbon nanotubes.     

Vibrational and electrical investigations of a uniaxially stretched polystyrene/carbon nanotube composite

Multiwall carbon nanotube (MWCNT)/polystyrene (PS) composite materials were prepared in the absence and in the presence of a surfactant. TEM analysis reveals the formation of chains made of several nanotubes tied up together upon application of the surfactant while an almost random distribution is observed without any treatment. These nanotubes are seen to be highly oriented in the uniaxially stretched composite. It is shown that the presence of the surfactant and the alignment reduce electrical conductivity while polymer chain orientation remains insensitive to these parameters.     

Shear-induced ordering of micellar arrays in the presence of single-walled carbon nanotubes

Single-walled carbon nanotubes were found to induce elongation and alignment of surfactant micelles in thin films under the action of shear, leading to the formation of ordered arrays over micron lengths.     

Solid-state reference electrodes based on carbon nanotubes and polyacrylate membranes

A novel potentiometric solid-state reference electrode containing single-walled carbon nanotubes as the transducer layer between a polyacrylate membrane and the conductor is reported here. Single-walled carbon nanotubes act as an efficient transducer of the constant potentiometric signal originating from the reference membrane containing the Ag/AgCl/Cl⁻ ions system, and they are needed to obtain a stable reference potentiometric signal. Furthermore, we have taken advantage of the light insensitivity of single-walled carbon nanotubes to improve the analytical performance characteristics of previously reported solid-state reference electrodes. Four different polyacrylate polymers have been selected in order to identify the most efficient reservoir for the Ag/AgCl system. Finally, two different arrangements have been assessed: (1) a solid-state reference electrode using photo-polymerised n-butyl acrylate polymer and (2) a thermo-polymerised methyl methacrylate:n-butyl acrylate (1:10) polymer. The sensitivity to various salts, pH and light, as well as time of response and stability, has been tested: the best results were obtained using single-walled carbon nanotubes and photo-polymerised n-butyl acrylate polymer. Water transport plays an important role in the potentiometric performance of acrylate membranes, so a new screening test method has been developed to qualitatively assess the difference in water percolation between the polyacrylic membranes studied. The results presented here open the way for the true miniaturisation of potentiometric systems using the excellent properties of single-walled carbon nanotubes.     

An explanation of dispersion states of single-walled carbon nanotubes in solvents and aqueous surfactant solutions using solubility parameters

Dispersions of single-walled carbon nanotubes in various solvents and aqueous surfactant emulsions were investigated to correlate the degree of dispersion state with Hansen solubility parameters (deltat2=deltad2+deltap2+deltah2). It was found that the nanotubes were dispersed or suspended very well in the solvents with certain dispersive component (deltad) values. They were precipitated in the solvents with high polar component (deltap) values or hydrogen-bonding component (deltah) values. The solvents in the dispersed group occupied a certain region in a 3-dimensional space of three components. The surfactants with a lipophilic group equal to and longer than decyl, containing 9 methylene groups and 1 methyl group, contributed to the dispersion of nanotubes in water. The surfactants in the dispersed group had a lower limit in the dispersive component (deltad) of the Hansen parameter.     

Separation of carbon nanotubes in aqueous medium by capillary electrophoresis

A robust and reproducible method for the dispersion of carbon nanotubes, either single-walled or multi-walled is presented. Dispersion of nanotubes was achieved as surfactant-coated species of sodium dodecyl sulphate. The addition of small amounts of hydroxypropyl methyl cellulose (HPMC) together with the surfactant, sodium dodecyl sulphate, was found critical to achieve reproducible nanotubes dispersion and to obtain an homogeneous and stable solution. This solution is further analyzed by capillary electrophoresis using a background electrolyte solution containing a polymer, 0.025% (w/v) HPMC solution prepared in 5 mM ammonium acetate at pH 8.03. This electrophoretic method presents a high reproducibility between runs, being an interesting alternative to study nanotube size distribution or characterization after synthesis. In addition, the methodology developed allowed the study of the interaction of the different types of carbon nanotubes with a molecular probe such as pentachlorophenol. This procedure was showed effective to detect small differences on the chemical/physical surface properties of the nanotubes. The different interaction behavior found within the two SWNTs selected was critically discussed.     

Understanding surfactant aided aqueous dispersion of multi-walled carbon nanotubes

Dispersions of multi-walled carbon nanotubes (MWNTs) assisted by surfactant adsorption were prepared for a number of ionic and non-ionic surfactants including sodium 4-dodecylbenzenesulfonate (NaDDBS), hexadecyl(trimethyl)azanium bromide (CTAB), sodium dodecane-1-sulfonate (SDS), Pluronic? F68, Pluronic? F127, and Triton? X-100 to examine the effects of nanotube diameter, surfactant concentration, and pH on nanotube dispersability. Nanotube diameter was found to be an important role in surfactant adsorption rendering single-walled carbon nanotube studies as unreliable in predicting MWNT dispersive behavior. Similar to other reports, increasing surfactant concentrations resulted in a solubility plateau. Quantification of nanotube solubility at these plateaus demonstrated that CTAB is the best surfactant for MWNTs at neutral pH conditions. Deviations from neutral pH demonstrated negligible influence on non-ionic surfactant adsorption. In contrast, both cationic and anionic surfactants were found to be poor dispersing aids for highly acidic solutions while, CTAB remained a good surfactant under strongly basic conditions. These pH dependent results were explained in the context of nanotube surface ionization and Debye length variation.     

A triptycene-based approach to solubilising carbon nanotubes and C60

We describe herein the synthesis of a triptycene-based surfactant designed with the ability to solubilise single-walled carbon nanotubes (SWNTs) and C(60) in water through non-covalent interactions. Furthermore, an amphiphilic naphthalene-based surfactant with the same ability to solubilise SWNTs and C(60) has also been prepared. The compounds synthesised were designed with either two ionic or non-ionic tails to ensure a large number of supramolecular interactions with the solvent, thereby promoting strong solubilisation. The surfactants produced stable suspensions in which the SWNTs are dispersed and the surfactant/SWNT complexes formed are stable for more than one year. UV/Vis/NIR absorption spectroscopy, TEM and AFM were employed to probe the solubilisation properties of the dispersion of surfactants and SWNTs in water.     

UV-light mediated decomposition of a polyester for enrichment and release of semiconducting carbon nanotubes

Purification of single-walled carbon nanotubes using conjugated polymers to selectively disperse either semiconducting or metallic nanotubes is effective and has received significant attention. However, the interaction between the conjugated polymer and the nanotube surface is very strong, making it difficult to remove the adsorbed polymer. Here, we report a poly(carbazole-co-terephthalate) polymer that is not only selective for semiconducting carbon nanotubes but can also be largely removed from the nanotube surface via irradiation with UV light. Irradiation of the polymer-nanotube dispersion causes degradation of ester linkages in the polymer backbone, effectively cutting the polymer into fragments that no longer bind strongly to the nanotube surface. Characterization of the electronic nature of the samples was carried out via the combination of absorption, Raman, and fluorescence spectroscopy. In addition, thermogravimetric analysis allowed determination of the amount of polymer left on the nanotube surface after irradiation and indicated that a large proportion of the polymer is removed. The reported methodology opens new possibilities for purification of semiconducting single-walled carbon nanotubes and their isolation from the polymeric dispersant.     

Interactions between polymers and carbon nanotubes: a molecular dynamics study

We used force-field-based molecular dynamics to study the interaction between polymers and carbon nanotubes (CNTs). The intermolecular interaction energy between single-walled carbon nanotubes and polymers was computed, and the morphology of polymers adsorbed to the surface of nanotubes was investigated. Furthermore, the "wrapping" of nanotubes by polymer chains was examined. It was found that the specific monomer structure plays a very important role in determining the strength of interaction between nanotubes and polymers. The results of our study suggest that polymers with a backbone containing aromatic rings are promising candidates for the noncovalent binding of carbon nanotubes into composite structures. Such polymers can be used as building blocks in amphiphilic copolymers to promote increased interfacial binding between the CNT and a polymeric matrix.     

Analysis of stability of nanotube dispersions using surface tension isotherms

In this paper, we present the analyses of surface tension of surfactant-stabilized dispersions of carbon nanotubes. This method allows one to study interactions of carbon nanotubes with surfactants at different levels of nanotube loading when optical methods fall short in quantifying the level of nanotube separation. Sodium dodecyl sulfate was used as a stabilizing agent to uniformly disperse single-walled carbon nanotubes in an aqueous media. We show that surface tension is very sensitive to small changes of nanotube and surfactant concentrations. The experimental data suggest that, at moderate concentrations, surfactant displaces carbon nanotubes from the air-water interface and the nanotubes are mostly moved into the bulk of the liquid. By analyzing the surface tension as a function of surfactant concentration, we obtained the dependence of critical micelle concentration on nanotube loading. We then constructed the adsorption isotherm for dodecyl sulfate on carbon nanotubes and bundles of carbon nanotubes. The results of these experiments enabled us to extend the phase diagram of the produced dispersions to a broader range of surfactant and nanotube concentrations.     

Interaction between zigzag single-wall carbon nanotubes and polymers: a density-functional study

Density-functional all-electrons calculations within local-density approximation show that the two isoelectronic polymers poly(para-phenylene) and poly(para-borazylene) weakly interact with zigzag single-walled carbon nanotubes. The analysis of the electronic properties of the joint systems, both with the polymer inside and outside the nanotubes, reveals a physisorption process with small changes in band structures and densities of states with respect to the constituents. We evaluate the potential barrier arising between polymers and nanotubes. Finally, we remark a generic selectivity of poly(para-phenylene) with respect to the electronic behavior of nanotubes, leading to a change in the density of states of metallic tubules.     

The effects of the lengths and orientations of single-walled carbon nanotubes on the electrochemistry of nanotube-modified electrodes

The influence of both nanotube orientation and length on the electrochemical properties of electrodes modified with single-walled carbon nanotubes was investigated. Gold electrodes were modified with either randomly dispersed or vertically aligned nanotubes to which ferrocenemethylamine was attached. Electron transfer kinetics were found to depend strongly on the orientation of the nanotube, with electron transfer between the gold electrode and the ferrocene moiety being 40 times slower through randomly dispersed nanotubes than through vertically aligned nanotubes. The difference is hypothesized to be due to electron transfer being more direct through a single tube than that with electrodes modified with randomly dispersed nanotubes. With the vertically aligned nanotubes the rate constant for electron transfer varied inversely with the mean length of the nanotubes. The results indicate there is an advantage in using aligned carbon nanotube arrays over randomly dispersed nanotubes for achieving efficient electron transfer to bound redox active species such as in the case of bioelectronic or photovoltaic devices.