Stereochemistry of dihydroxylation of <Emphasis Type="Italic">N</Emphasis>-arylbicyclo[2.2.1]-hept-5-ene-<Emphasis Type="Italic">endo</Emphasis>- and -<Emphasis Type="Italic">exo</Emphasis>-2,3-dicarboximides

Stereochemistry of the oxidation of N-arylbicyclo[2.2.1]hept-5-ene-endo-and-exo-2,3-dicarboximides at the double bond with peroxyacetic acid generated in situ in the presence of sulfuric acid and with an anhydrous dioxane solution of peroxyacetic acid was studied. In both cases, the reaction was stereospecific, regardless of the substituent in the N-aryl group and configuration of the imide ring, but the reaction direction depended on the presence of water in the system. In the first case, the corresponding trans-5,6-dihydroxy derivatives were formed, while in the second, exo-5,6-epoxy derivatives. The oxidation of N-arylbicyclo[2.2.1]-hept-5-ene-endo-and-exo-2,3-dicarboximides with a solution of potassium permanganate in aqueous acetone gave the corresponding N-aryl-cis-5,6-dihydroxybicyclo[2.2.1]heptane-endo-and-exo-2,3-dicarboximides. The exo,cis,exo and exo,cis,endo configurations of the synthesized compounds were determined by ¹H NMR spectroscopy.     

Kinetics and mechanism of the catalytic reaction between ozone and <Emphasis Type="Italic">para</Emphasis>-cresol in acetic anhydride

The kinetics of the liquid-phase catalytic oxidation of para-cresol with an ozone-air mixture in the presence of manganese(II) acetate is reported. In an acetic anhydride medium, para-cresol reacts with ozone as para-cresyl acetate, which is formed at the instant the solution to be oxidized is prepared. Under these conditions, the major oxidation products are para-acetoxybenzyl acetate (63.5%) and para-acetoxybenzylidene diacetate (13.7%). The effect of the managanese(II) acetate concentration on the traction selectivity with respect to the oxidation of the methyl group of the substrate is reported. A mechanism consistent with the experimental data available on this catalytic redox reaction is suggested.     

Sodium perborate/NaNO<Subscript>2</Subscript>/KHSO<Subscript>4</Subscript>-triggered synthesis and kinetics of nitration of aromatic compounds

Sodium perborate (SPB) was used as efficient green catalyst for NaNO₂/KHSO₄-mediated nitration of aromatic compounds in aqueous acetonitrile medium. Synthesis of nitroaromatic compounds was achieved under both conventional and solvent-free microwave conditions. Reaction times were comparatively shorter in the microwave-assisted than conventional reaction. The reaction kinetics for nitration of phenols in aqueous bisulfate and acetonitrile medium indicated first-order dependence on [Phenol], [NaNO₂], and [SPB]. Reaction rates accelerated with introduction of electron-donating groups but retarded with electron-withdrawing groups. Kinetic results did not fit well quantitatively with Hammett’s equation. Observed deviations from linearity were addressed in terms of exalted Hammett’s constants (\( \bar{\sigma } \) or σ_eff), para resonance interaction energy (ΔΔG_p) parameter, and Yukawa–Tsuno parameter (r). This term provides a measure of the extent of resonance stabilization for a reactive structure that builds up charge (positive) in its transition state. The observed negative entropy of activation (?ΔS^#) suggests greater solvation and/or cyclic transition state before yielding products.     

The first principle computational study for the competitive mechanisms of oxidative aromatization of 2-substituted imidazolines using KMnO<Subscript>4</Subscript>/SiO<Subscript>2</Subscript>

The efficiently oxidized various types of 2-substituted imidazolines to the corresponding imidazoles using potassium permanganate supported on silica gel (KMnO₄/SiO₂) under mild conditions and at room temperature have been reported before. In this study, the competitive concerted, catalytic stepwise (E ₁ cb′ _Cat .) and E ₁ cb′ mechanisms of the oxidative aromatization process of 2-imidazolines to the corresponding imidazoles using KMnO₄/SiO₂ have been theoretically investigated by DFT-B3LYP/6-31G** method. The achieved data from this computational study confirmed that the reaction occurs by stepwise E ₁ cb′ mechanism on the basis of the anomeric effect.     

Rheological study on the cure kinetics of two-component addition cured silicone rubber

The cure kinetics for two-component silicone rubber formed by addition reaction was studied by the rheological method. The influence of reaction temperature (T) on the cure kinetics was explored in detail. It was observed that the data of gel time (t _gel, i.e. the time when the reaction reaches the gel point) or a specific reaction time (t _nc) (defined as the reaction time before which time the influence of confinement of network on the diffusion of reaction components can be neglected) versus T obey certain functional relationship, which was well explained by the cure kinetics model of thermoset network. The cure kinetics for the two-component silicone rubber can be well fitted by the Kamal-Sourour(autocatalyst) reaction model rather than Kissinger model. When the reaction time was before or equal to t _nc, the reaction order obtained by the Kamal-Sourour reaction model was 2, which was consistent with the reaction order inferred from the two components chemical reaction when the diffusion of reaction components was not influenced by the formed cross-linked polymer network. When the reaction time was larger than t _nc, such as to the end of reaction (t _e), the influence of confinement of network on the diffusion of reaction components cannot be neglected, and the reaction order obtained by the Kamal-Sourour reaction model was larger than 2. It was concluded that the confinement effect of network had a greater influence on the cure kinetics of the silicone rubber. The reaction rate constants (k _r) under different temperatures were also determined by Kamal-Sourour reaction model. The activation energy (E) for the two-component silicone rubber was also calculated from the results of lnt _gel, lnt _nc, and lnk _r versus 1/T, respectively. The three values of E were close, which indicated that above analyses were self-consistent.     

A comparison of energy changes accompanying growth processes by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Calculations are made using the equations Δ_r G = Δ_r H ? TΔ_r S and Δ_r X = Δ_r H ? Δ_r Q where Δ_r X represents the free energy change when the exchange of absorbed thermal energy with the environment is represented by Δ_r Q. The symbol Q has traditionally represented absorbed heat. However, here it is used specifically to represent the enthalpy listed in tabulations of thermodynamic properties as (H _T  ? H ₀) at T = 298.15 K, the reason being that for a given substance TS equals 2.0 Q for solid substances, with the difference being greater for liquids, and especially gases. Since Δ_r H can be measured, and is tangibly the same no matter what thermodynamics are used to describe a reaction equation, a change in the absorbed heat of a biochemical growth process system as represented by either Δ_r Q or TΔ_r S would be expected to result in a different calculated value for the free energy change. Calculations of changes in thermodynamic properties are made which accompany anabolism; the formation of anabolic, organic by-products; catabolism; metabolism; and their respective non-conservative reactions; for the growth of Saccharomyces cerevisiae using four growth process systems. The result is that there is only about a 1% difference in the average quantity of free energy conserved during growth using either Eq. 1 or 2. This is because although values of TΔ_r S and Δ_r Q can be markedly different when compared to one another, these differences are small when compared to the value for Δ_r G or Δ_r X.     

Stability of <Emphasis Type="Italic">s</Emphasis>-, <Emphasis Type="Italic">p</Emphasis>-, and <Emphasis Type="Italic">d</Emphasis>-element diphosphates in water

The mean atomic Gibbs energies of formation of (Δ _f ? _at ⁰ ) of s-, p-, and d-element diphosphates have been calculated using ion increments of the Gibbs energy (Δ _f G ⁰). The diphosphate hydrolysis kinetics is considered, and a correlation between the Δ _f ? _at ⁰ values and the hydrolysis rate constants is presented.     

In Vitro Binding of Furadan to Bovine Serum Albumin

Under physiological conditions, the interaction between furadan (FRD) and bovine serum albumin (BSA) was investigated by spectroscopy including fluorescence emission, UV-visible absorption, scattering, circular dichroism (CD) spectra, synchronous and three-dimensional fluorescence spectra. The observed binding constant K _b and the number of binding sites n were determined by the fluorescence quenching method. The distance r between donor (BSA) and acceptor (FRD) was obtained according to the Förster theory of non-radiation energy transfer. The enthalpy change (ΔH ^θ ), Gibbs energy change (ΔG ^θ ) and entropy change (ΔS ^θ ) at four different temperatures were calculated. The process of binding was proposed to be a spontaneous process since the ΔG ^θ values were negative. The positive ΔS ^θ and ΔH ^θ values indicated that the interaction of FRD and BSA was driven mainly by hydrophobic interactions. The addition of FRD to BSA solutions leads to enhancement in scattering intensity, exhibiting the formation of an aggregate in solution. CD spectra, synchronous and three-dimensional fluorescence spectra were used to measure the structural change of BSA molecules with FRD present.     

Theoretical Study of Substituent Effect in Aryl Group Migration in (<Emphasis Type="Italic">para</Emphasis>-C<Subscript>6</Subscript>H<Subscript>4</Subscript>X)Mn(CO)5 Complexes

In this study, we report substituent effect on aryl group migration in (para-C₆H₄X)Mn(CO)₅ complexes using mpw1pw91 quantum chemical calculations. These calculations reveal good linear relationships between barrier energy (ΔE), activation energy (ΔH^?), activation free energy (ΔG^?) values and rate constants with Hammett constants of X-substituents. The occupancy values of Mn–CO_cis and Mn–C(O)-(para-C₆H₄X) bonds in reactant, transition state and product were calculated by Natural bond orbital (NBO) method.     

Synthesis and piezoelectric properties of <Emphasis Type="Italic">N</Emphasis>-phthaloylglutamic acid derivatives

The (S,S)- and (R,R)-enantiomers of dimethyl 2,4-diphthalimidoglutarate were synthesized by nucleophilic substitution of bromine in dimethyl (2S,4RS)-4-bromo-N-phthaloyl-glutamate upon treatment with potassium phthalimide, followed by separation. The crystal structure of the obtained compounds was studied by X-ray diffraction. Crystals of enantiomerically pure dimethyl 4-hydroxy- and 4-phthalimido-N-phthaloylglutamates were found to possess a noticeable piezoelectric activity.     

The synthesis of substituted 5-aminopyrido[3′,2′:4,5]thieno[3,2-<Emphasis Type="Italic">c</Emphasis>]isoquinolines and their sulfinyl and sulfonyl derivatives

5-Aminopyrido[3′,2′:4,5]thieno[3,2-c]isoquinolines were synthesized via alkylation of 3-cyanopyridine-2(1H)-thiones with 2-(chloromethyl)benzonitrile followed by treatment of the products with potassium tert-butoxide. The oxidation of the alkylated products to corresponding sulfoxides or sulfones followed by treatment with potassium tert-butoxide provided the corresponding 11-oxides or 11,11-dioxides.     

Thermal deformation thermodynamics of a smectite mineral

A method has been purposed to calculate some of the thermodynamic quantities for the thermal deformation of a smectite without using any basic thermodynamic data. The Hanç?l? (Keskin, Ankara, Turkey) bentonite containing a smectite of 88% by volume was taken as material. Thermogravimetric (TG) and differential thermal analysis (DTA) curves of the sample were obtained. Bentonite samples were heated at various temperatures between 25–900°C for the sufficient time (2 h) until to establish the thermal deformation equilibrium.Cation-exchange capacity (CEC) of heated samples was determined by using the methylene blue standard method. The CEC was used as a variable of the equilibrium. An arbitrary equilibrium constant (K _a) was defined similar to chemical equilibrium constant and calculated for each temperature by using the corresponding CEC-value. The arbitrary changes in Gibbs energy (ΔG _a ⁰ ) were calculated from K _a-values. The real change in enthalpy (ΔH ⁰) and entropy (ΔS ⁰) was calculated from the slopes of the lnK vs. 1/T and ΔG vs. T plots, respectively. The real changes in Gibbs energy (ΔG ⁰) and real equilibrium constant (K) were calculated by using the ΔH ⁰ and ΔS ⁰ values. The results at the two different temperature intervals are summarized as below: ΔG ₁ ⁰ =ΔH ₁ ⁰ ?ΔS ₁ ⁰ T=?RTlnK ₁=47000?53t, (200–450°C), and ΔG ₂ ⁰ =ΔH ₂ ⁰ -ΔS ₂ ⁰ T=?RTlnK ₂=132000?164T, (500–800°C).     

Kinetics of ethylene glycol electrooxidation on the noble metal-based nano-catalysts

A comparative electrooxidation of Eg in the alkaline solution was investigated over Pt, Pd and Au nanoparticle-modified carbon-ceramic electrode. The kinetic parameters of Eg oxidation, i.e., Tafel slope and activation energy (E _a), were determined on the modified electrodes. The lowest E _a value of 8.9 kJ mol^?1 was calculated on Pt|CCE. In continuation, the reaction orders with respect to the Eg and NaOH concentrations on Pd|CCE were found to be 0.4–0.2 and 0.6, respectively. An adsorption equilibrium constant (b) of 22.36 M^?1 and the adsorption Gibbs energy change (ΔG°) of ?7.7 kJ mol^?1 were obtained on Pd|CCE. The chronopotentiometry (CP) and chronoamperometry (CA) results showed that Pd|CCE and then Au|CCE have better performance stability than Pt|CCE for Eg electrooxidation. Additionally, the electrochemical impedance spectroscopy (EIS) suggested faster electron-transfer kinetics on Pt than that on the Pd and Au electrocatalysts.     

Effect of donor and acceptor properties of solvents on the kinetics of photoreduction of sterically hindered <Emphasis Type="Italic">о</Emphasis>-benzoquinones

Effect of the solvent nature on the kinetics of photoreduction of 3,6-di-tert-butyl-1,2-benzoquinone and its six derivatives in the presence of N,N-dimethylaniline and 4-(N,N-dimethylamino)benzaldehyde has been investigated. It has been found that for the о-quinone—amine pair, for which the free energy change of electron transfer is ΔG_e > +0.11 eV, the rate constant of о-quinone photoreduction k_H decreases proportionally to the increase in the acceptor number of the solvent. For the о-quinone—amine pair with ΔG_e < +0.11 eV, the k_H value decreases proportionally to the increase in the donor number of the solvent. It has been established that the enhancement of the electron-acceptor properties of the solvent leads to the emergence of kinetic isotope effect for the reactant pairs of 3,6-di-tert-butyl-1,2-benzoquinone and 4,5-dimethoxy-3,6-di-tert-butyl-1,2-benzoquinone with N,N-di-methylaniline (ΔG_e = +0.11 and +0.22 eV, respectively).     

Oxidation with potassium permanganate of <Emphasis Type="Italic">p-tert</Emphasis>-butylcalix[4]arene derivatives containing olefinic substituents at the lower rim

In oxidation with potassium permanganate of p-tert-butylcalix[4]arene derivatives containing olefinic substituents at the lower rim, with the formation of the corresponding carbonyl compounds, calixarene acts as both the substrate and the catalyst.     

Hydrogen bonds,coordination isomerism,and catalytic dehydrogenation of alcohols with the bifunctional iridium pincer complex $$^{{{\left( {HOC{H_2}} \right)}_2}}\left( {P{C_{s{p^3}}}P} \right)$$IrHCl

The reaction of iridium(iii) hydride complex 1 based on the pincer dibenzobarrelene ligand \(^{{{\left( {HOC{H_2}} \right)}_2}}\left( {P{C_{s{p^3}}}P} \right)\) with pyridine proceeds stepwise to show different reactivities of the starting fac-isomers 1A and 1B. The kinetic product of the reaction is mer-complex 2 with a trans disposition of the pyridine and hydride ligands. Isomerization into the thermodynamic product 2′ containing pyridine in the cis-position with regard to hydride proceeds slowly. The estimation of activation parameters (ΔH ^≠ and ΔS ^≠) shows that the change in the geometry of fac-complexes upon coordination of pyridine occurs through an associative transition state, while isomerization of the mer-complexes is a dissociative process. The isomers of complex 1 and its pyridine-containing derivatives 2 and 2′ are shown to exhibit different reactivities in the formation of dihydrogen bond and the catalytic dehydrogenation of PrⁱOH under model conditions.     

Factors determining the reactivity of the bromine atom toward haloalkanes

Experimental data concerning reactions of the bromine atoms with haloalkanes and carbonyl compounds (25 reactions) have been analyzed within the intersecting parabolas model. The following factors have an effect on the activation energy of these reactions: enthalpy of reaction, triplet repulsion, electronegativity of reaction center atoms, dipole–dipole and multidipole interactions of the reaction center with polar groups, and the interaction of π electrons with electrons of the reaction center. The increments characterizing the contribution from each factor to the activation energy of the reaction have been calculated. The increment ΔEμ, which characterizes the dipole–dipole interaction in the transition state, and the dipole moment of the polar group (μ) are correlated by the following empirical equation: ln(ΔE _μ/Σμ) = ?0.14 + 0.47(ΔE _μ/Σμ) ? 0.024(ΔE _μ/Σμ)².     

Effect of Medium pH And Ion Strength on the Thermal Stability of Plant Formate Dehydrogenases

The effect of medium pH and ion strength on the thermal stability of formate dehydrogenases (EC 1.2.1.2, FDH) from model plant Arabidopsis thaliana (AthFDH) and soybean Glycine max (SoyFDH) are studied. The dependence of the residual activity on time is described by the kinetics of the reaction of the first order in all the experimental conditions. The dependence of the first order thermal inactivation constants on phosphate buffer concentration has the form of a bell-shaped curve. It was found that an increase in the pH value resulted in an increase and decrase of inactivation rate constans for SoyFDH and AthFDH, respectively. The activation parameters of the thermal inactivation process, ΔH^≠ and ΔS^≠ are calculated from the experimental data at different medium pH values and phosphate buffer concentrations.     

Supramolecular structure,spectroscopic, thermal studies and antimicrobial activities of Schiff base complexes

Metal(II) complexes of 4-(((2-hydroxynaphthalen-1-yl)methylene)amino)-1,5-dimethyl-2-phenyl-1,2-dihydro-3H-pyrazol-3-one (HL) were prepared, and their compositions and physicochemical properties were characterized on the basis of elemental analysis, with¹HNMR, UV–Vis, IR, mass spectroscopy and thermogravimetric analysis. All results confirm that the novel complexes have a 1:1 (M:HL) stoichiometric formulae [M(HL)Cl₂] (M = Cu(II)(1), Cd(II)(5)), [Cu(L)(O₂NO)(OH₂)₂](2), [Cu(HL)(OSO₃)(OH₂)₃]2H₂O(3), [Co(HL)Cl₂(OH₂)₂]3H₂O(4), and the ligand behaves as a neutral/monobasic bidentate/tridentate forming a five/six-membered chelating ring towards the metal ions, bonding through azomethine nitrogen, exocyclic carbonyl oxygen, and/or deprotonated phenolic oxygen atoms. The XRD studies show that both the ligand and Cu(II) complex (1) show polycrystalline with monoclinic crystal structure. The molar conductivities show that all the complexes are non-electrolytes. On the basis of electronic spectral data and magnetic susceptibility measurements, a suitable geometry has been proposed. The trend in g values (g _ll > g _⊥ > 2.0023) suggest that the unpaired electron on copper has a \(d_{{x^{2} - y^{2} }}\) character, and the complex (1) has a square planar, while complexes (2) and (3) have a tetragonal distorted octahedral geometry. The molecular and electronic structures of the ligand (HL) and its complexes (1–5) have been discussed. Molecular docking was used to predict the binding between HL ligand and the receptors of the crystal structure of Escherichia coli (E. coli) (3t88) and the crystal structure of Staphylococcus aureus (S. aureus) (3q8u). The activation thermodynamic parameters, such as activation energy (E _a), enthalpy (ΔH), entropy (ΔS), and Gibbs free energy change of the decomposition (ΔG) are calculated using Coats–Redfern and Horowitz–Metzger methods. The ligand and its metal complexes (1–5) showed antimicrobial activity against bacterial species such as Gram positive bacteria (Bacillus cereus and S. aureus), Gram negative bacteria (E. coli and Klebsiella pneumoniae) and fungi (Aspergillus niger and Alternaria alternata); the complexes exhibited higher activity than the ligand.     

Synthesis of oxo derivatives of <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">p</Emphasis>-tolysulfonyl)hexahydrocycloalka[<Emphasis Type="Italic">b</Emphasis>]indoles

Hydroxymercuration-demercuration of N-p-tolysulfonyl-4,4a,9,9a-tetrahydro-3H-carbazoles and N-p-tolyl(or methyl)sulfonyl-1,3a,4,8b-tetrahydrocyclopenta[b]indoles leads to the formation of the corresponding N-p-tolylsulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-2-ols and N-p-tolyl(or methyl)sulfonyl-1,2,3,3a,4,8b-hexahydrocyclopenta[b]indol-2-ols. The latter are oxidized to 2-oxo derivatives with potassium dichromate. The oxidation of 2-methoxy-8-methyl-N-p-tolylsulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-1-ol under analogous conditions gives 2-methoxy-8-methyl-N-p-tolysulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-1-one.