Modulation techniques and applications in comprehensive two-dimensional gas chromatography (GC x GC)

More than a decade after Phillips' first published work this article reviews recent developments in comprehensive two-dimensional gas chromatography (GC x GC). Special attention is devoted to the further development and diversity of modulation devices. These include heated sweepers, cryofocused modulators, and a variety of diaphragm valve-switching strategies. It is demonstrated that all modulation approaches can be very well suited to GC x GC, depending on the particular application. Diaphragm-valve modulation is very powerful for volatile organic compounds. Slotted heater and cryofocused modulation are preferred for samples that contain non-volatile components. Applications ranging from petroleum to environmental and biological samples are illustrated. Extension of the technique to GC x GC-mass spectrometry (MS) is also discussed and trends for future research activity are pointed out.     

Flow-switching device for comprehensive two-dimensional gas chromatography

A simple flow-switching device has been developed as a differential flow modulator for comprehensive two-dimensional gas chromatography (GC x GC). The device is assembled from tubing, four tee unions, and a solenoid valve. The solenoid valve is located outside the oven of the gas chromatograph and is not in the sample path. The modulation technique has no inherent temperature restrictions and passes 100% of the primary column effluent to the secondary column(s). Secondary peaks are produced with widths at half maximum less than 100 ms when operating in GC x 2GC mode with a 2.0 s modulation period. The efficacy of this approach is demonstrated through the analysis of a standard mixture of volatile organic compounds (VOCs) and diesel fuel.     

Application of comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry in the analysis of volatile oil of traditional Chinese medicines

This paper reports comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry (GC x GC-TOF MS) analysis of Pogostemon cablin Benth (Cablin Parchouli) volatile oil. The suitable column system and operation conditions were chosen on the basis of the properties of composition of the volatile oil. One-dimensional gas chromatography (ID-GC) and GC x GC, GC-MS and GC x GC-TOF MS were compared under appropriate conditions, and the enhanced sensitivity and superior resolution of GC x GC were demonstrated. 394 components were tentatively identified by GC x GC-TOF MS.     

Development and Applications of an Automated In-Column Pyrolysis Gas Chromatography-Mass Spectrometry System

A novel system for sample introduction into a Gas Chromatograph (GC) using an automated in-column pyrolysis device has been developed. The in-column pyrolysis device is suitable for use with any GC or GC-MS system. Solid samples are dissolved or emulsions can be diluted and injected into the system. Because the system is designed for introducing liquid samples, a better control of the injected sample amounts is achieved. This leads to high reproducibility of the peak areas, offering new opportunities for quantitation of polymers or other high molecular weight materials. In addition, a better statistical representation of the material to be analyzed is given if the samples are dissolved in a solvent. The system can be operated both in a normal GC injection mode, and in the pyrolysis mode. As a conventional GC injector working in on-column or Programmed Temperature Vaporization (PTV) injection mode, (without the pyrolysis function), information on the volatile fraction of a sample can be obtained. Once the volatile materials in the sample have been separated, a second analysis on the non-volatile matrix can be performed by initiating the pyrolysis sequence, yielding information on the non-volatile fraction of the sample. Both features, on column or PTV injection mode and in-column pyrolysis can be used separately or in combination. This new technology is expected to be useful for the determination of additives, monomers, solvents and other volatile components in a non volatile matrix, such as polymers, as well as in the characterization of the non-volatile matrix itself, in a single run. Revised: 20 June and 21 July 2005     

Automated on-line comprehensive two-dimensional LC x GC and LC x GC-ToF MS: instrument design and application to edible oil and fat analysis

After a successful off-line feasibility study, the automation of comprehensively coupled liquid chromatography and gas chromatography (LC x GC) has been studied. Important aspects to consider when developing automated LG x GC include the relative speeds of the two dimensions, the compatibility of the LC eluent (type and flow rate) with the GC dimension, and the column loadabilities. Because the GC separation is relatively slow, the LC instrument has to be operated in the stop-flow mode. Two interfaces for transferring large numbers of subsequent LC fractions to the GC were constructed: one based on a six-port switching valve, and one which uses a dual side-port syringe. Both interfaces were found to perform fully acceptably. The actual transfer of the LC fraction to the GC was realised using a standard split injector to vaporise the compounds and LC eluent. Gas phase splitting was applied to match LC mass load and GC column loadability. The standard deviations of the peak areas obtained in this way were better than 7% (n = 6). The reliability of the system was demonstrated by the problem-free analysis of large series of oil and fat samples, with the focus on both intact triglycerides and their fatty acid methyl esters (FAMEs). Finally, the hyphenation of the automated LC x GC system to a sensitive and rapid-scanning time-of-flight mass spectrometer was realised. By using LC x GC-ToF MS, the information density of the chromatograms could be improved even further, which allowed easy identification of individual compounds as well as compound groups.     

Comprehensive multi-dimensional chromatographic studies on the separation of saturated hydrocarbon ring structures in petrochemical samples

Characterization of complex petrochemical samples has been a classical subject of comprehensive two-dimensional (2D) gas chromatography (GC x GC). Macroscopic properties of these samples can be described accurately by separation of compounds in classes of identical molecular functionality. Ring structures in the carbon backbone of these compounds, which can be divided in saturated and unsaturated, are amongst the foremost functionalities affecting samples properties. Unfortunately, GC x GC tuned for separation of both saturated and unsaturated ring structures is likely to result in convoluted chromatograms when a distribution of both molecular properties is present in the sample. An independent liquid chromatographic (LC) separation preceding GC x GC could be used to resolve the mixture based on unsaturated rings, allowing saturated rings to be resolved separately in the GC x GC separation. This three-dimensional separation (abbreviated LC-GC x GC) was performed after rigorous evaluation of LC as part of a multidimensional separation using LC x GC. Group-type separation was achieved using this separation for components with either saturated or unsaturated rings. Results of this separation were used to compare information obtained by GC x GC with LC-GC x GC.     

Combination of a liquid chromatography-ultraviolet method with a non-volatile eluent, peak trapping and a liquid chromatography-mass spectrometry method with a volatile eluent to characterise erythromycin related substances

The selectivity and sensitivity obtained with volatile liquid chromatographic (LC) methods are often inferior compared to non-volatile ones. However, the buffers often used in the non-volatile system are incompatible to mass spectrometry (MS). So, the characterisation of unknown peaks in a non-volatile system, based on data obtained from a volatile LC-MS method, is problematic. In this study, the unknown peaks in a non-volatile liquid chromatography coupled with ultraviolet detection (LC-UV) system were directly characterised by a volatile LC-MS system using a peak trapping technique. Each peak eluted from the non-volatile system was trapped by a switching valve and sent to a LC-MS system using a volatile mobile phase. Mass spectral data were acquired on an LCQ ion trap mass spectrometer equipped with electrospray ionisation (ESI) operated in the positive ion mode. Using this technique, the fragmentation behaviour of erythromycin and its related substances was studied and the components occurring in commercial samples were investigated. In total 25 compounds mentioned in the literature were traced. Fourteen more unknown impurities were also studied.     

Qualitative mass spectrometric analysis of the volatile fraction of creosote-treated railway wood sleepers by using comprehensive two-dimensional gas chromatography

The volatile composition of 20-year-old out-of-service creosote-treated railway wood sleepers was studied. The emitted volatile fraction was collected by means of dynamic purge-and-trap concentration at ambient temperature, and analyzed by comprehensive two-dimensional gas chromatography (GC x GC) hyphenated with mass spectrometric detection systems, using quadrupole (GC x GC/qMS) and time-of-flight (GC x GC/ToF-MS) mass analyzers and selective nitrogen-phosphorus detection (GC x GC-NPD). The analysis of mass spectrometry data and GC x GC retention time allowed the tentative identification of about 300 compounds based on spectrometric data and positioning of each compound in the GC x GC plot. Major important headspace components are polyaromatic hydrocarbons, phenols and benzene derivatives, hydrocarbons and heterocyclic compounds containing nitrogen, sulphur or oxygen atoms. Many of the reported compounds are listed as belonging to toxicological substance classes which have been related to harmful health effects. GC x GC provides greater speciation and evidence of composition heterogenicity of the sample than one-dimensional GC analysis, thus allowing to better demonstrate its potential toxicity. Data obtained by specific detection systems for N-heterocycles assisted mass data interpretation assignments. The enhanced separation power obtained after GC x GC compared to one-dimensional gas chromatography (1D-GC) together with spectral deconvolution and correlation with physical-chemical data, allowed the identification of complex isomer clusters, as demonstrated for alkylquinolines, and applied also to alkylphenols, alkylbenzenes and alkylnaphthalenes.     

New valve switching modulator for comprehensive two-dimensional gas chromatography

This paper describes a new design for a valve switching modulation system developed for comprehensive two-dimensional gas chromatography (GC x GC). This system is based on the differential flow and is different from the earlier reported in the literature. It has several advantages and constructed of inexpensive, commercially available parts that are easily installed on most gas chromatographs. Operation is easy and robust and requires no external coolants. This new design allows GC x GC analysis to be conducted in any laboratory environment capable of supporting conventional GC and imposes no additional consumable costs. The system is flexible and permits the use of a wide range of stationary phase combinations. The system has been successfully tested for complete material transfer and is suitable for quantitative analysis. The flexibility of this system is demonstrated using several test mixtures that show its extended application in petroleum, biochemistry, and environmental studies.     

Comprehensive two-dimensional gas chromatography: a hyphenated method with strong coupling between the two dimensions.

Comprehensive two-dimensional gas chromatography (GC x GC) provides a true orthogonal separation system. It is explained and demonstrated that it generates a peak capacity that is approximately equal to the product of the peak capacities of the two individual separation systems. The resulting peaks are ordered in a two-dimensional plane in bands of compounds with the same characteristics. Quantitation of the separated (groups of) components is fundamentally not different from one-dimensional gas chromatography, but the sensitivity is far better and true baseline is always available. The two co-ordinates of each peak in the plane make the identification more reliable. Instrumental considerations of GC x GC are discussed. The three designs of contemporary GC x GC systems are presented and compared. Although the technique is still very young, a number of applications on complex samples as petroleum and environmental samples have already been reported. Finally, the future perspectives of GC x GC are discussed.     

Innovations in high-pressure liquid injection technique for gas chromatography: pressurized liquid injection system

In gas chromatography (GC), highly volatile liquefied hydrocarbons are commonly injected using devices such as high-pressure syringes, piston valves, liquid rotary sampling valves, or vaporizing regulators. Although these techniques are adequate in some cases, there are known deficiencies. A new generation of sampling valve has been recently innovated and commercialized. Some of the highlights of the pressurized liquid injection system (PLIS) include compact size, the capability to directly couple to an injection port without the need for preinjection vaporization and transfer lines, and sample sizes ranging from 0.2 to 2.0 micro L. Although the valve has a specification of helium leak-free rating of 82.7 bar (1200 psig), the valve passes a hydrostatic pressure test of up to 414 bar (6000 psig). In the unheated version of PLIS, vaporization of solutes occur mainly because of the sheering effect of carrier gas in combination with thermal energy drawn from an injection port or a heated adaptor. This was found to be adequate for solutes with high to medium volatility of up to nC14 hydrocarbon. A higher molecular weight range of up to nC44 hydrocarbon can be achieved with the implementation of a heated version of PLIS, in which the channel of the shaft can be resistively heated at a rate of up to 400 degrees C/s. With its first introduction in May 2002, PLIS has gained acceptance amongst practitioners in GC because it addresses a key unarticulated need in sample introduction/enrichment and by specifically targeting many deficiencies encountered in contemporary high-pressure injection devices. In this paper, the design and performance of the various valve systems of PLIS, as well as industrial chromatographic applications, is presented.     

水蒸气蒸馏提取与顶空进样GC-MS分析高良姜挥发性成分

比较了水蒸气蒸馏法和顶空加热法提取高良姜挥发性成分的方法,并进行GC-MS分析。结果表明,两种提取方法无论在成分还是其相对含量均存在一定的差异。采用顶空进样技术可鉴定出31个挥发性化学成分,采用水蒸气蒸馏法可鉴定出31个挥发性化学成分,两种方法共有成分为16种。两种样品采集方法分别提供了高良姜不同沸点挥发物的化学信息,运用这两种方法可以建立更全面的高良姜挥发性成分GC-MS表征体系。     

全二维气相色谱技术及其进展

 许多分析问题的解决需要得到比一维色谱技术能提供的更高的分辨率。分离能力可通过使用多种分离技术或机理的组合来增强。此时 ,样品被分散在不同的时间维 ,最终的分辨率强烈地依赖于这些维间分离特性的差异。当它们之间没有关联 ,也即相互间正交时 ,系统可获得最高的分辨率。全二维气相色谱 (GC×GC)提供了一个真正的正交分离系统。它把分离机理不同而又互相独立的两支色谱柱以串联方式结合组成二维气相色谱。在这两支色谱柱之间装有的一个调制器起捕集再传送的作用。全二维色谱的峰容量为组成它的两支色谱柱各自峰容量的乘积。     

Determination of radix ginseng volatile oils at different ages by comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry

Comprehensive 2-D GC (GC x GC) coupled with TOF MS or flame ionization detector (FID) was employed to characterize and quantify the chemical composition of volatile oil in the radixes of Panax ginseng C. A. Mey. (ginseng) at different ages. Thirty-six terpenoids were tentatively identified based on the MS library search and retention index in a ginseng sample at the age of 3 years. An obvious group-type separation was obtained in the GC x GC-TOF MS chromatogram. The data collected by GC x GC-FID were processed using a principal component analysis (PCA) method to classify the samples at different ages. The compounds responsible for the significant differentiation among samples were defined. It was found that the relative abundances of alpha-cadinol, alpha-bisabolol, thujopsene, and n-hexadecanoic acid significantly rise with the increase in age.     

全二维气相色谱/飞行时间质谱法在莪术挥发油组成分析中的应用

通过优化GC×GC的柱系统、温度程序和调制参数等色谱条件,建立了分析中药莪术挥发油组成的全二维气相色谱/飞行时间质谱(GC×GC/TOFMS)方法,实现了莪术挥发油的单个组分与族组分分析.采用所建立的GC×GC/TOFMS方法,鉴定出匹配度大于800的组分有249种,其中单萜18种,单萜含氧衍生物34种,倍半萜35种,倍半萜含氧衍生物37种,有69种组分的体积分数大于0.02%.     

Improved determination of flavour compounds in butter by solid-phase (micro)extraction and comprehensive two-dimensional gas chromatography

The practicability and potential of comprehensive two-dimensional gas chromatography (GC x GC) coupled to both conventional flame ionisation (FID) and time-of-flight mass spectrometric (TOF-MS) detection, were compared with those of conventional one-dimensional (1D) GC, with the determination of flavour compounds in butter as an application. For polar flavour compounds, which were collected from the aqueous fraction of butter by means of solid-phase extraction (SPE), it was found that GC x GC dramatically improves the overall separation. Consequently, quantification and preliminary identification based on the use of ordered structures, can be performed more reliably. The improvement effected by replacing 1D-GC by GC x GC is considerable also in the case of TOF-MS detection, as illustrated by the high match factors generally obtained during identification. GC x GC was also used successfully for the characterisation of volatile flavour compounds in the headspace of butter collected by solid-phase microextraction (SPME) and to study the effect of heat treatment on the composition of butter samples in more detail.     

Evaluation of different internal-diameter column combinations in comprehensive two-dimensional gas chromatography in flavour and fragrance analysis

A series of OV1-OV1701 column sets, in which the two dimensions differ in id and/or film thickness, were adopted to separate components of the volatile and semivolatile fraction of samples of plant origin. In particular two applications are presented: a target analysis approach to determine volatile suspected allergens in a medium-complexity fragrance and in sandalwood essential oil, and a fingerprint analysis approach to compare herbal extracts. Some basic chromatographic parameters of these combinations, i. e. net separation measure (S(GC x GC)), degree of orthogonality and a suitable number of modulations per peak, were also estimated by analysing two test mixtures: FAME (C4:0-C24:0) and suspected volatile allergens. Experimental results show that 0.25 mm homologous id column combination, despite their lower separation power, have good capacity to separate and resolve medium-to-complex fractions from samples of plant origin, demonstrating: (i) good system orthogonality, maximized through proper exploitation of stationary-phase selectivity and (ii) reduced 2-D column overloading effects due to the increased 2-D mass loadability, thus facilitating the analysis of mixtures whose components differ significantly in relative abundance.     

Implementation and optimisation of a high‐temperature loading strategy of liquid standards in the quantification of volatile organic compounds using solid sorbents

High‐temperature liquid standard loading strategy onto solid sorbent traps for calibration of thermal desorption–GC–MS techniques for the analysis of volatile organic compounds is evaluated and optimised. With this proposed set‐up, volatilised liquid‐loaded standards interact in gas phase with solid sorbent particles. Response factor for 15 volatile compounds with different vapour pressures have been evaluated and compared with common strategies based on liquid matrix interactions. Using gas matrix strategy improves signal output in the range 10–700%. Average increase for benzene, toluene, ethylbenzene and xylenes is 480%. Reported systematic bias between liquid standards and gas samples are reduced, enhancing thermal desorption methodologies on one of its more important issues. In addition, the proposed system improves the average repeatability to a 3.2%, over 13 times some reported data. The use of an ultra‐thin GC capillary column of 150 μm id performs better peak resolution in about 60% the time with usual 250 μm id capillary columns. The usefulness of this proposed optimised procedure has been proved in real air matrix samples, through a large study with the reliable characterisation of 93 different volatile compounds in the ambient air of a municipal solid waste treatment area     

Application of comprehensive two-dimensional gas chromatography to the quantification of overlapping faecal sterols

Standard solutions containing a mixture of seven sterols and 5alpha-cholestane as internal standard, and sample mixtures that comprised varying ratios of sterol and stanols from green lip mussel tissue and dried cow faeces were analysed by using comprehensive two-dimensional gas chromatography (GC x GC). Quantitative results were compared with single-column GC analysis. The latter samples included sterols of interest, but which cannot be readily obtained elsewhere. It may also mimic potential environmental samples where dairy production and aquaculture (oyster, mussel cultivation) share the same catchment; environmental sterol signatures may exhibit characteristics of both sample types comprising this mixture. Whereas single-column GC-flame ionisation detection was unable to reliably quantitate target sterols, the GC x GC experiment permitted small amounts of sterols and stanols to be detected and separated. Likewise GC-MS analysis was unable to detect some of the minor sterols which coeluted on a single column. The GC x GC mode allows complete separation of several important sterols and stanols, such as 24-ethylcoprostanol, campesterol and 24-methylenecholesterol, demonstrating the enhanced resolving power of the GC x GC system. Separation of 24-ethyl-epi-coprostanol from several algal-derived interfering components was achieved, leading to higher degree of confidence in the quantitative analysis of faecal sterols. The effects of a number of operating variables--column length, carrier flow-rate and elution temperature--on component resolution and presentation of data in the two-column analysis are described.     

Chromatographic analysis of hydrocarbons in marine sediments and seawater.

The low concentration of hydrocarbons anticipated in pollution baseline studies necessitates the development of analytical techniques sensitive at the sub-microgram per kilogram concentration level. The method of analysis developed in this laboratory involves dynamic headspace sampling for volatile hydrocarbon components of the sample, followed by coupled-column liquid chromatography for the non-volatile components. These techniques require minimal sample handling, reducing the risk of sample component loss and/or sample contamination. Volatile sample components are separated from the matrix in a closed system and concentrated on a TENAX-GC packed pre-column, free from large amounts of solvent and ready for GC/GC-MS analysis. Non-volatile compounds, such as the benzpyrenes, may be extracted from large volumes of water and concentrated on a Bondapak C18 packed pre-column for coupled-column liquid chromatographic separation and analysis. Results of the application of these techniques to the analysis of samples from sites of known low level hydrocarbon contamination are presented and discussed.