An extended optimal replacement model of systems subject to shocks

A system is subject to shocks that arrive according to a non-homogeneous Poisson process. As shocks occur a system has two types of failures: type I failure (minor failure) is rectified by a minimal repair, whereas type II failure (catastrophic failure) is removed by replacement. The probability of a type II failure is permitted to depend on the number of shocks since the last replacement. This paper proposes a generalized replacement policy where a system is replaced at the nth type I failure or first type II failure or at age T, whichever occurs first. The cost of the minimal repair of the system at age t depends on the random part C(t) and deterministic paper c(t). The expected cost rate is obtained. The optimal n¹ and optimal T¹ which would minimize the cost rate are derived and discussed. Various special cases are considered and detailed.     

Inverse problems for parabolic equations 2

Let u_t − u_xx = h(t) in 0 ⩽ x ⩽ π, t ⩾ 0. Assume that u(0, t) = v(t), u(π, t) = 0, and u(x, 0) = g(t). The problem is: what extra data determine the three unknown functions {h, v, g} uniquely? This question is answered and an analytical method for recovery of the above three functions is proposed.     

Unsteady magnetohydrodynamic Hartmann–Couette flow and heat transfer in a Darcian channel with Hall current,ionslip, viscous and Joule heating effects: Network numerical solutions

A theoretical study of unsteady magnetohydrodynamic viscous Hartmann–Couette laminar flow and heat transfer in a Darcian porous medium intercalated between parallel plates, under a constant pressure gradient is presented. Viscous dissipation, Joule heating, Hall current and ionslip current effects are included as is lateral mass flux at both plates. The dimensionless conservation equations for the primary (x¹-direction), secondary (z¹-direction) momentum and also energy conservation equation are derived and solved using a computational technique known as Network Simulation Methodology (NSM). Velocity distributions (u¹, w¹) and temperature distribution (T¹) at the channel centre (y¹ = 0) over time (t¹) are studied graphically for the effects of Darcy number (Da), Hartmann number (Ha), transpiration (N_t), Hall current parameter (Be), ionslip parameter (Bi), pressure gradient parameter (dP/dx¹) with Prandtl number prescribed at 7.0 (electrically conducting water), Eckert number held constant at 0.25 (heat convection from the plates to the fluid) and Reynolds number (Re) fixed at 5.0 (for Re < 10, Darcian model is generally valid). Increasing Darcy number causes an increase in temperature, T¹; values are however significantly reduced for the higher Hartmann number case (Ha = 10). For the case of low transpiration (i.e. N_t = 1 which corresponds to weak suction at the upper plate and weak injection at the lower plate), both primary velocity (u¹) and secondary velocity (w¹) are increased with a rise in Darcy number (owing to a simultaneous decrease in Darcian porous drag); temperature T¹ is also increased considerably with increasing Da. However, for stronger transpiration (N_t = 10), magnitudes of u¹, w¹ and T¹ are significantly reduced and also significant overshoots are detected prior to the establishment of steady state flow. With increasing Hall current parameter, Be, (for the purely fluid regime i.e. Da → ∞), primary velocity is considerably increased, whereas secondary velocity is reduced; temperatures are decreased in the early stages of flow but effectively increased in the steady state with increasing Be. With strong Darcian drag present (Da = 0.01 i.e. very low permeability), magnitudes of u¹, w¹ and T¹ are considerably reduced and temperatures are found to be reduced for all t¹, with increasing Hall current effect (Be). Increasing ionslip current parameter (Bi) increases primary velocity (u¹), decreases secondary velocity (w¹) and also temperature (T¹) for all time (t¹), in the infinite permeability case (Da → ∞). For weakly Darcian flow, ionslip parameter (Bi) has a much reduced effect on the velocity distributions. Temperature, T¹ is strongly increased with a rise in pressure gradient parameter, dP¹/dx¹, as is primary velocity (u¹); however, secondary velocity (w¹) is reduced. The present study has applications in hybrid magnetohydrodynamic (MHD) energy generators, materials processing, geophysical hydromagnetics, etc.     

Existence of quasibounded solutions for the higher order dynamic equations on measure chains

By using the exponential dichotomy and Schauder’s fixed point theorem, some new criteria are established for the existence of quasibounded solutions of the inhomogeneous system x^Δ = A(t)x + g(t, x) + h(t), which generalize the previous results in [15], [19].     

Homotopy analysis of unsteady boundary layer flow adjacent to permeable stretching surface in a porous medium

This communication deals with the unsteady boundary layer flow of a viscous fluid in porous medium started due to the impulsively stretching of the plane wall. The wall is assumed to be porous so that suction or injection is possible. Complete analytic solution which is uniformly valid for all the dimensionless times 0 ⩽ τ < 0 in the whole spatial region 0 ⩽ η < ∞ is obtained by a purely analytic technique, namely the homotopy analysis method. Results are discussed through graphs.     

Analytic integrability of the Bianchi class A cosmological models with 0 ⩽ k < 1

Many works study the integrability of the Bianchi class A cosmologies with k = 1, where k is the ratio between the pressure and the energy density of the matter. Here we characterize the analytic integrability of the Bianchi class A cosmological models when 0 ⩽ k < 1. We conclude that Bianchi types VI₀, VII₀, VIII and IX can exhibit chaos whereas Bianchi type I is not chaotic and Bianchi type II is at most partially chaotic.     

The stochastic soliton-like solutions of stochastic KdV equations

By means of a generalized method and symbolic computation, we consider a stochastic KdV equation U_t + f(t)U ♢ U_x + g(t)U_xxx = W(t) ♢ R^♢(t, U, U_x, U_xxx). We construct new and more general formal solutions. At the same time, we recover all the solutions found by Xie [Phys. Lett. A 310 (2003) 161]. The solutions obtained include the nontravelling wave and coefficient function’s stochastic soliton-like solutions, singular stochastic soliton-like solutions, stochastic triangular functions solutions.     

Space–time symmetry violation,configuration mixing model and E-infinity theory

We have studied the time reversal symmetry violation on the bases of the configuration mixing model and E-infinity theory. With the use of the Cabibbo angle approximation, we have presented the transformation matrix in terms of the golden ratio (?), and shown that the time reversal symmetry violation is described by the configuration mixing of the unstable and stable manifolds (W^u, W^s). The magnitude of the mixing for the weak interaction field is given by the expression sin² θ_T(theor) ≈ sin⁴ θ_C(theor) ≈ (?)¹² = 3.105 × 10^?3, which is compared to the Kaon decay experiment ～2.3 × 10^?3. We have also discussed the space–time symmetry violation by using the CPT theorem.     

Net-convergence and weak separation axioms in (L, M)-fuzzy topological molecular lattices

In this paper, we used the concept of (L, M)-fuzzy remote neighborhood system to study and establish the convergence theory of molecular nets. Next, we introduce the T_i-axioms (i = ?1, 0, 1, 2) in (L, M)-fuzzy topological molecular lattices, and discuss some of their characterizations. Finally, we show that the T_i-axioms (i = ?1, 0, 1, 2) are preserved under homeomorphisms.     

Free in-plane vibration analysis of a curved beam (arch) with arbitrary various concentrated elements

In the existing literature, the information regarding the exact solutions for free in-plane vibrations of the curved beams (or arches) carrying various concentrated elements is rare, particularly for the case with multiple attachments including eccentricities and mass moments of inertias. For this reason, this paper aims at presenting an effective approach to tackle the title problem. First of all, the un-coupled equation of motion for the circumferential displacement of an arch segment is derived. Next, based on the value of the discriminate parameter for a cubic equation, the exact solutions for the three types of roots of the un-coupled equation are determined and, corresponding to each type of roots, all displacement functions for the arch segment in terms of the real numbers (instead of the complex ones) are obtained. Finally, use of the compatible equations for the displacements and slopes together with the equilibrium equations for the forces and moments at each intermediate node and two ends of the entire curved beam, a frequency equation of the form ∣H(ω)∣ = 0 is obtained. It is found that the conventional approach by using the condition “∣H(ω^t)∣ ? ε” to search for the approximate value of ω^t is difficult even if the convergence tolerance ε is greater than 10⁺³ (i.e., ε > 10⁺³) instead of less than 10^?3 (i.e., ε < 10^?3), however, the half-interval method is one of the effective tools for solving the problem if all coefficients of the determinant ∣H(ω)∣ are the real numbers. In addition to comparing with the existing literature, most of the numerical results obtained from the presented method are compared with those obtained from the conventional finite element method (FEM) and good agreement is achieved.     

A semi-Markov process with an inverse Gaussian distribution as sojourn time

Let X_n denote the state of a device after n repairs. We assume that the time between two repairs is the time τ taken by a Wiener process {W(t), t ? 0}, starting from w₀ and with drift μ < 0, to reach c ∈ [0, w₀). After the nth repair, the process takes on either the value X_n?1 + 1 or X_n?1 + 2. The probability that X_n = X_n?1 + j, for j = 1, 2, depends on whether τ ? t₀ (a fixed constant) or τ > t₀. The device is considered to be worn out when X_n ? k, where k ∈ {1, 2, …}. This model is based on the ones proposed by Rishel (1991) [1] and Tseng and Peng (2007) [2]. We obtain an explicit expression for the mean lifetime of the device. Numerical methods are used to illustrate the analytical findings.     

Magnetohydrodynamic stationary and oscillatory convective stability in a mushy layer during binary alloy solidification

For the case of solidification of a bottom cooled binary alloy, the magnetohydrodynamic stationary and oscillatory convective stability in the mushy layer is investigated analytically using normal mode linear stability analysis. In the limit of large Stefan number (S_t), a near–eutectic approximation with large far field temperature is considered in the present research. To ascertain the instability in the mushy layer, the strength of the superimposed magnetic field is so chosen that it corresponds to a given mush Hartmann number (Ha_m) of the problem. The results are presented for various values of mush Hartmann numbers in the range, 0 ≤ Ha_m ≤ 50. The critical Rayleigh number for stationary convection shows a linear relationship with increasing Ha_m. The magnetohydrodynamic effect imparts a stabilizing influence during stationary convection. In comparison to that of the stationary convective mode, the oscillatory mode appears to be critically susceptible at higher values of β (β = S_t/℘² ϒ², ℘ is the compositional ratio, ϒ = 1 + S_t/℘), and vice versa for lower β values. Analogous to the behavior for stationary convection, the magnetic field also offers a stabilizing effect in oscillatory convection and thus influences global stability of the mushy layer. Increasing magnetic strength shows reduction in the wavenumber and in the number of rolls formed in the mushy layer.     

Multi-server machine repair problems under a (V, R) synchronous single vacation policy

This paper considers a machine repair problem with M operating machines and S standbys, in which R repairmen are responsible for supervising these machines and operate a (V, R) vacation policy. With such policy, if the number of the failed machines is reduced to R − V (R > V) (there exists V idle repairmen) at a service completion, these V idle servers will together take a synchronous vacation (or leave for other secondary job). Upon returning from the vacation, they do not take a vacation again and remain idle until the first arriving failed machine arrives. The steady-state probabilities are solved in terms of matrix forms and the system performance measures are obtained. Algorithmic procedures are provided to deal with the optimization problem of discrete/continuous decision variables while maintaining a minimum specified level of system availability.     

Solution of the Burgers equation using an implicit linearizing transformation

The initial-boundary-value problem on the semi-infinite interval and on a finite interval for the Burgers equation u_t = u_xx + 2u_xu is solved using a stream function ? and a linearizing transformation w = e^?. The transformation reduces the equation to a heat equation with appropriate initial and homogeneous time-dependent linear boundary conditions. One advantage of this method is that we never need to find an explicit expression for ? in our computations.     

Matrix characterization of linear codes with arbitrary Hamming weight hierarchy

The support of an [n, k] linear code C over a finite field F_q is the set of all coordinate positions such that at least one codeword has a nonzero entry in each of these coordinate position. The rth generalized Hamming weight d_r(C), 1 ⩽ r ⩽ k, of C is defined as the minimum of the cardinalities of the supports of all [n, r] subcodes of C. The sequence (d₁(C), d₂(C), … , d_k(C)) is called the Hamming weight hierarchy (HWH) of C. The HWH, d_r(C) = n − k + r;  r = 1, 2 , …, k, characterizes maximum distance separable (MDS) codes. Therefore the matrix characterization of MDS codes is also the characterization of codes with the HWH d_r(C) = n − k + r; r = 1, 2, … , k. A linear code C with systematic check matrix [I∣P], where I is the (n − k) × (n − k) identity matrix and P is a (n − k) × k matrix, is MDS iff every square submatrix of P is nonsingular. In this paper we extend this characterization to linear codes with arbitrary HWH. Using this result, we characterize Near-MDS codes, Near-Near-MDS (N²-MDS) codes and A^μ-MDS codes. The MDS-rank of C is the smallest integer η such that d_η+1 = n − k + η + 1 and the defect vector of C with MDS-rank η is defined as the ordered set {μ₁(C), μ₂(C), μ₃(C), … , μ_η(C), μ_η+1(C)}, where μ_i(C) = n − k + i − d_i(C). We call C a dually defective code if the defect vector of the code and its dual are the same. We also discuss matrix characterization of dually defective codes. Further, the codes meeting the generalized Greismer bound are characterized in terms of their generator matrix. The HWH of dually defective codes meeting the generalized Greismer bound are also reported.     

New exact solitary-wave special solutions for the nonlinear dispersive K(m, n) equations

In this paper, we study the nonlinear dispersive K(m, n) equations: u_t + (u^m)_x − (uⁿ)_xxx = 0 which exhibit solutions with solitary patterns. New exact solitary solutions are found. The two special cases, K(2, 2) and K(3, 3), are chosen to illustrate the concrete features of the decomposition method in K(m, n) equations. The nonlinear equations K(m, n) are studied for two different cases, namely when m = n being odd and even integers. General formulas for the solutions of K(m, n) equations are established.     

Iterative Solution of Nonlinear Equations Involving Strongly Accretive Operators without the Lipschitz Assumption

LetEbe a real Banach space with a uniformly convex dual spaceE*. SupposeT:E → Eis a continuous (not necessarily Lipschitzian) strongly accretive map such that (I − T) has bounded range, whereIdenotes the identity operator. It is proved that the Ishikawa iterative sequence converges strongly to the unique solution of equationTx = f,f ∈ E. Our results extend and complement the recent results obtained by Chidume.