Synthesis and characterization of graphene oxide,reduced graphene oxide and their nanocomposites with polyethylene oxide

This work describes the synthesis of GO, rGO and their nanocomposites with PEO. GO and rGO were prepared by the modified Hummers method and in-situ reduction of GO utilizing green reductant L (+) Ascorbic acid. The nanocomposites were characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), Field emission scanning electron microscopy (FE-SEM), Thermogravimetric Analysis (TGA), and Universal Testing Machine (UTM). FT-IR and XRD confirmed the synthesis of GO and rGO. FE-SEM confirmed the uniformly exfoliated GO and rGO nanosheets in the polymer matrix. Hydrogen bonding was the main interaction mechanism for GO with PEO while no interaction was detected by FT-IR for rGO. Enhanced thermal stability was observed for both GO/PEO and rGO/PEO nanocomposites. The mechanical analysis showed an increase in Young's modulus, tensile strength, and elongation at break for GO/PEO nanocomposites, which is attributed to the homogeneous dispersion and hydrophilic hydrogen bonding interaction of GO with PEO.     

Synthesis and characterization of nanocomposites films with graphene oxide and reduced graphene oxide nanosheets

Graphene oxide (GO) and reduced graphene oxide (CRGO), as a graphene derivatives, possess unique properties and a high aspect ratio, indicating great potential in nanocomposite fields. The present work reports the fabrication of the nanocomposite films by a simple and environmentally friendly process using aqueous solution and optimized time sonication for better exfoliation of the graphene sheets within Poly(Vinyl alcohol) (PVA) as matrix. The films were characterized using high-resolution TEM (HRTEM), X-ray diffraction (XRD), Microtensile testing, Differential scanning calorimetry (DSC) and Thermogravimetric analysis (TGA). The TEM images revealed a successfully exfoliation of the GO/CRGO nanosheets. XRD combined with TGA and DSC measurements showed an improvement in the thermal stability and tunable thermal properties. In addition, the Young's modulus and tensile yield strength of the composite films containing 1 wt% GO were obtained to be 4.92 GPa and 66 MPa respectively. These excellent reinforcement effects were achieved by the strong interaction between the components.     

Template-free synthesis of ZnV2O4 hollow spheres and their application for organic dye removal

Hollow ZnV₂O₄ spheres with the shell aggregated by small nanoparticles were successfully synthesized through a facile one-pot template-free solvothermal method. The as-prepared product was characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), and Brunauer-Emmett-Teller N₂ adsorption-desorption analyses. The formation of ZnV₂O₄ hollow spheres was based on flowerlike intermediate products supported reduction-dissolution-aggregation process at the expense of consumption of all the flowerlike products. The obtained ZnV₂O₄ hollow spheres showed a good adsorption capacity of methylene blue (MB) organic dye, which might be attributed to their special structural feature with large surface area. The adsorption kinetics and isotherm of MB on ZnV₂O₄ hollow spheres were also studied.     

Transition of hexagonal to square sheets of Co3O4 in a triple heterostructure of Co3O4/MnO2/GO for high performance supercapacitor electrode

Cobalt oxide and manganese oxides are promising electrode materials amongst the transition metal oxides (TMOs) for pseudocapacitors. The lack of reversibility and deterioration of capacitance at higher current densities is major flaw in Co₃O₄ as an electrode for supercapacitor while MnO₂ suffers from low electrical conductivity and poor cycling stability. It is inevitable to bridge the performance gap between these two TMOs to obtain a high performance supercapacitor based on environmental benign and earth abundant materials. Herein, we fabricated a hybrid triple heterostructure high-performing supercapacitor based on hexagonal sheets of Co₃O₄, MnO₂ nanowires and graphene oxide (GO) to form a composite structure of Co₃O₄/MnO₂/GO by all hydrothermal synthesis route. The Co₃O₄ square sheets serves as an excellent backbone with good mechanical adhesion with the current collector providing a rapid electronic transfer channel while the integrated nanostructure of MnO₂ NW/GO permits more electrolyte ions to penetrate capably into the hybrid structure and allows effective utilization of more active surface areas. A triple heterostructured device exhibits a high areal capacitance of 3087 mF cm⁻² at 10 mV s⁻¹ scan rate along with the exceptional rate capability and cycling stability having capacitance retention of ∼170% after 5000 charge/discharge cycles. The TMOs based pseudocapacitor with the conducting scaffolds anchoring based on graphene derivatives like this will pave an encouraging alternatives for next generation energy storage devices.     

Ultrasonic assisted synthesis of Ni3(VO4)2-reduced graphene oxide nanocomposite for potential use in electrochemical energy storage

In the present study, Ni₃(VO₄)₂-reduced graphene oxide (NV/RGO) nanocomposite was synthesized for energy storage purpose. To this end, a mixture containing RGO nanosheets, Ni (CH₃COOH)₂ and Na₃VO₄ mixture was prepared under probe-type ultrasonic irradiation with frequency of 20 KHz and the optimized power of 100 W. The Raman and energy-dispersive X-ray spectroscopies confirmed the presence of RGO nanosheets, nickel and vanadium elements in the NV/RGO, respectively. In addition, field emission-scanning electron microscopy (FESEM) data showed the formation of the NV nanoparticles on the RGO nanosheets. NV/RGO nanocomposite was pasted on nickel foam (NF) and its performance was investigated in energy storage using a three-electrode cell containing 6 M KOH. In cyclic voltammogram of NV/RGO/NF, redox peaks for Ni (II)/Ni (III) with intensities higher than that for NV/NF were observed which confirms the synergistic effect of RGO on the performance of NV. Chronopotentiometry data revealed that the NV/RGO/NF electrode exhibits high capacity of 117.22 mA h g⁻¹ at 2 A g⁻¹. Electrochemical impedance spectroscopy also demonstrated an improvement in the electrical conductivity and electrochemical behavior of NV/RGO/NF nanocomposite compared to the RGO/NF and NV/NF. Furthermore, NV/RGO/NF electrode reserved about 88% of its initial capacity after 1000th potential cycle at 50 mV s⁻¹. Overall, the results of our study suggest that the NV/RGO nanocomposite prepared in the presence of ultrasonic irradiation might be regarded as a suitable active material for energy storage systems.     

Sonochemical synthesis and characterization of Co3O4 nanocrystals in the presence of the ionic liquid [EMIM][BF4]

For the first time, a sonochemical process has been used to synthesis cobalt oxide Co₃O₄ nanoflowers and nanorods morphology in the presence of the ionic liquid 1-Ethyl-3-methylimidazolium tetrafluoroborate [EMIM][BF₄] as reaction media and morphology template. Different sonication time periods and different molar ratios of the ionic liquid (IL) were used to investigate their effects on the structural, optical, chemical and magnetic properties of the produced Co₃O₄ nanoparticles. During synthesis process brown powder contains cobalt hydroxide Co(OH)₂ and cobalt oxyhydroxide (Cobalt hydroxide oxide) CoO(OH) was formed, after calcination in air for 4 h at 400 °C a black powder of Co₃O₄ nanoparticles was produced. The produced Co₃O₄ nanoparticles properties were characterized by X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), transmission electron microscopy (TEM), FTIR spectroscopy, UV–vis spectroscopy, and Vibrating Sample Magnetometer (VSM). To explain the formation mechanism of Co₃O₄ NPs some investigations were carried on the brown powder before calcination.     

Theoretical evaluation to improve the performance of composite wax powder: cooperativity effects involving the strong Na+···π/σ and weak hydrogen-bonding interactions in the complex of graphene oxide with Na+ and CH4

ABSTRACT

To provide a reasonable design scheme to improve the performance of composite wax powder, the ternary complex Na⁺···graphene oxide (GO)···CH₄ was selected as a model system to evaluate the cooperativity effect between the Na⁺···σ/π and H-bonding interactions in the composite wax powder doped with GO at the M06-2X/6-311++G(2d,p) and MP2/6-311++G(2d,p) levels. The cooperativities in GO···(CH₄)_n (n?=?1～10) and thermodynamic cooperativity effects in Na⁺···GO···CH₄ were also investigated. Although the changes of the absolute values of H-bonding interactions were slight, from those of relative values, the influence of the Na⁺···π or Na⁺···O interaction on the C–H···π, O–H···C or C–H···O interaction was notable upon the formation of ternary systems. The anti-cooperativity effect was found in the cyclic structure, while the cooperativity effect appeared in the linear conformation. The Na⁺···σ/π and H-bonding interactions as well as cooperativities in Na⁺···GO···CH₄ were stronger than those in Na⁺···coronene···CH₄. The formation of Na⁺···GO···CH₄ is a thermodynamic cooperativity process driven by the enthalpy change. Therefore, it could be inferred that, when graphite powder or carbon black was replaced by GO, the compatibilities could be strengthened among various components, and thus the performance of casting moulds could be improved. Atoms-in-molecules (AIM) and reduced density gradient (RDG) analyses confirmed the cooperativity effect and revealed the nature of the improved performance of composite wax powder with GO. The GO···(CH₄)_n (n?=?1～3) are positively cooperative, while the negative cooperativity is shown when n?=?4～10.     

Synthesis of nanocomposites of iron oxide/gold (Fe3O4/Au) loaded on activated carbon and their application in water treatment by using sonochemistry: Optimization study

This paper focuses on the finding best operational conditions using response surface methodology (RSM) for Rhodamine123 (R123) and Disulfine blue (DSB) dyes removal by ultrasound assisted adsorption onto Au-Fe₃O₄ nanoparticles loaded on activated carbon (Au-Fe₃O₄ NPs-AC). The influences of variables such as initial R123 (X₁) and DSB concentration (X₂), pH (X₃), adsorbent mass (X₄) and sonication time (X₅) on their removal were investigated by small central composite design (CCD) under response surface methodology. The significant variables and the possible interactions among variables were investigated and estimated accordingly. The best conditions were set as: 4 min, 4.0, 0.025 g, 13.5 and 26.5 mg L⁻¹ for sonication time, pH, adsorbent weight, initial R123 and DSB concentration, respectively. At above conditions, the adsorption equilibrium and kinetic follow the Langmuir isotherm and pseudo-second-order kinetic model, respectively. The maximum monolayer capacity (Q_max) of 71.46 and 76.38 mg g⁻¹ for R123 and DSB show sufficiency of model for well presentation of experimental data.