Adsorption of pairs of NOx molecules on single-walled carbon nanotubes and formation of NO + NO3 from NO2

The adsorption of NO_x(x = 1, 2, 3) molecules on single-walled carbon nanotubes (SWCNTs) is investigated using first-principle calculations. Single NO, NO₂ and NO₃ molecules are found to physisorb on SWCNTs, but molecules can be chemisorbed in pairs on the top of carbon atoms at close sites of SWCNTs. The adsorption energy for pairs of NO or NO₃ molecules is larger than for pairs of NO₂ molecules. The local curvature is found to have a sizable effect on adsorption energies. The possibility of a surface reaction NO₂ + NO₂ → NO + NO₃ is examined and the relative pathway and barrier is calculated. The results are discussed with reference to available experimental results.     

Enhancement of H2 adsorption on a boron-doped carbon system for hydrogen storage

We study the adsorption of the molecular hydrogen on boron-doped polypyrrole ((–C₄BH₃)_n) using first-principles density functional calculations. We find that the binding energy of H₂ molecules is slightly reduced to 0.39 eV/H₂ from 0.51 eV/H₂ as the number of adsorbed H₂ molecules increases. This is in sharp contrast to the case of boron-doped fullerenes where the binding energy is drastically reduced as the number of adsorbed H₂ molecules increases. We find that the enhancement of H₂ adsorption is due to a local charge transfer by H₂ adsorption in the B-doped polypyrrole as opposed to a delocalized charge transfer in the B-doped fullerenes. Our finding shows that B-doped carbon systems could be utilized for room temperature hydrogen storage.     

Controllable oxidation of h-BN monolayer on Ir(111) studied by core-level spectroscopies

The effect of atomic oxygen adsorption on the structure and electronic properties of monolayer hexagonal boron nitride (h-BN) grown on Ir(111) has been studied using near edge X-ray absorption fine structure spectroscopy (NEXAFS), photoelectron spectroscopy (PES), and low-energy electron diffraction (LEED). It has been shown that the oxidation of the h-BN monolayer occurs through a gradual substitution of N by O in the h-BN lattice. This process leads to the formation of defect sites corresponding to three different types of the B atom environment (BN_3 ? xO_x with x = 1,2,3). The oxidation of the h-BN monolayer is very different from the case of graphene on Ir(111), where adsorption of atomic oxygen results mainly in the formation of epoxy groups [J. Phys. Chem. C. 115, 9568 (2011)]. A post-annealing of the h-BN monolayer after oxygen exposure results in further destruction of the B–N bonds and formation of a B₂O₃-like structure.     

The adsorption and dissociation of O2 molecular precursors on Cu: the effect of steps

The adsorption and dissociation of dioxygen on Cu steps are studied using periodic self-consistent density functional theory (PW91-GGA) calculations. Cu steps are modeled with a Cu(2 1 1) surface. The results are compared with those on the flat Cu(1 1 1) surface. The adsorption of both atomic and molecular oxygen is enhanced on the stepped surface: the binding energy of atomic oxygen is −4.5 eV at its preferred site on the relaxed Cu(2 1 1) surface vs. −4.3 eV at its preferred site on the relaxed Cu(1 1 1) surface, and the binding energy of the molecular oxygen precursor is increased from ∼−0.6 to ∼−1.0 eV. Several possible O₂ dissociation paths at the edge of the Cu(2 1 1) step have been investigated. The activation energies range from 0.09 to 0.24 eV, comparable to a minimum activation energy of 0.20 eV found on Cu(1 1 1). However, compared to Cu(1 1 1) the paths on Cu(2 1 1) are stabilized in their entirety by the step by ∼0.5 eV in terms of initial state, transition state, and final state energies. The dissociation of O₂ precursors at the foot of the step is close to being barrier-less. Because of the small dissociation barrier on Cu(1 1 1), the effect of steps on O₂ dissociation is nevertheless not expected to be as pronounced as in other gas/metal systems.     

B12N12纳米笼：潜在的二氧化氮检测传感器

利用密度泛函理论通过计算吸附能量、HOMO/LUMO能隙变化、电荷转移、结构扭曲等研究二氧化氮分子在B12N12纳米笼的吸附．此外,通过计算B₁₂N₁₂的电子结合能、Gibbs自由能、态密度和分子表面的静电势研究其稳定性和其它特性．B₁₂N₁₂纳米笼吸附二氧化氮显示三种构型．B₁₂N₁₂团簇的HOMO/LUMO能隙变化对二氧化氮分子的存在非常敏感,从自由团簇的6.84 eV降为NO₂/团簇稳定团簇的3.23 eV．团簇的导电性被极大地提高,表明B₁₂N₁₂纳米簇可能是潜在的二氧化氮气体分子检测传感器.     

Crystal structures and band gap characters of h-BN polytypes predicted by the dispersion corrected DFT and GW method

Geometry optimizations are performed for three polytypes of h-BN using density functional theory with dispersion correction for the van der Walls interaction. Quasiparticle band structure calculations are carried out to solve the controversy on band gap type of h-BN. Band energies are corrected by GW method. The h-BN with B_k structure has an indirect band gap of 5.840 eV. Two kinds of h-BN polytypes are shown to be mechanically stable and have quasi-direct band gap type.     

Understanding 4-bromostyrene Adsorption on the Si(001)-(1 × 2) surface: A density functional theory study

Adsorption properties of 4-bromostyrene (Br–Sty) on the Si(001)-(1 × 2) surface are investigated by ab initio calculation based on density functional theory (DFT). For the adsorption of Br–Sty molecule on the Si(001)-(1 × 2) surface, we have assumed two possible cases within: (i) binding on the partially H-terminated surface and (ii) binding on the clean surface. For the first case, we have estimated two different binding sides: (i) Bromine-terminated bindings and (ii) Carbon-terminated binding. The adsorption energies of Br-terminated and C-terminated binding were found as 0.36 eV and 3.76 eV, respectively. In the same manner, we have also assumed two possible binding sides for the clean surface: (i) Br-terminated binding and (ii) ring-shaped binding. We have found adsorption energies for Br-terminated and ring-shaped binding as 0.14 eV and 1.10 eV on the clean surface, respectively. Moreover, the nudged elastic band method (NEB) was used to reveal the adsorption pathway of these binding models. These results serve to understand the possibility of the adsorption of Br–Sty molecules onto different kind of silicon surfaces into different reaction conditions.     

First principles computational investigation on the possibility of Pt-decorated SiC hexagonal sheet as a suitable material for oxygen reduction reaction

First principles calculations play a significant role in developing and optimizing new energy storage and conversion materials especially at the nanoscale. In this work, the structural, energetics and, electronic properties of adsorbed Pt atom onto two-dimensional graphene, hexagonal BN (h-BN) and SiC (h-SiC) sheets have been investigated at DFT–B3LYP level of theory using coronene molecule as a suitable model. Spin-polarization and model size effects on the Pt adsorption properties have also been evaluated. Various positions for establishing Pt atom on the selected substrates have been considered and full structural optimization was carried out for all selected systems. The adsorption energies, electronic structures and charge population analysis indicated that in all the studied structures there were strong interaction between two interacting entities. It was also found that the adsorption ability of h-SiC is much stronger than the other counterparts with adsorption energy of −3.828 eV.We have also examined the O₂ adsorption properties of Pt-decorated graphene, h-BN and h-SiC sheets for possible tunability of O₂ adsorption strength of systems under study. We found that h-SiC sheet possess a weakened O₂ adsorption energy among the selected substrates. In view of the strong stability of adsorbed Pt atom on h-SiC sheet and relatively weaker O₂ adsorption energy, one can expect that h-SiC might be a promising material for support assistant as well as increasing the catalytic activity of Pt atoms compared to graphene and h-BN substrates. This may attribute to preventing aggregating of Pt atoms due to the strong fastening nature of the h-SiC sheet and also by affording a balance in the O₂ adsorption strength that lead to enhanced catalyst turnover. Therefore, our first principles findings offer a unique opportunity for design and applications of SiC-based nanoscale supports in fuel cell technology.     

Synthesis and characterization of (Bi2O3)1−x−y−z(Gd2O3)x (Sm2O3)y(Eu2O3)z quaternary solid solutions for solid oxide fuel cell

Sm₂O₃, Gd₂O₃, Eu₂O₃ triple-doped Bi₂O₃ based quaternary solid solutions were synthesized as a candidate electrolyte material using the solid-state reaction technique. The structural, thermal and electrical conductivity features of the ceramic samples were examined and compared by using X-ray powder diffraction (XRD), thermal gravimetry/differantial thermal analysis (TG/DTA) and the four-point probe technique (4PPT). The result of XRD measurements indicated that the (Bi₂O₃)_{(1−x−y−z)}(Gd₂O₃)_x(Sm₂O₃)_y(Eu₂O₃)_z (x = 10/y = 10/z = 5, 15, 20 mol % and x = 10/y = 5, 10, 15, 20/z = 10 mol %) samples have a stable face-centered cubic δ-phase and mixed phase crystallographic structure. The phase stability was also checked by the DTA evaluations results. The temperature dependent electrical conductivity measurements showed that the highest electrical conductivity was observed for the sample of the (Bi₂O₃)_0.75(Gd₂O₃)_0.10(Sm₂O₃)_0.05(Eu₂O₃)_0.10 system which has a stable and δ-phase was found as 6.67 × 10⁻³ (Ω cm)⁻¹ at 650 °C. This sample can be used as an electrolyte material in the solid oxide fuel cells (SOFCs) which is possible to operate at intermediate temperature ranges. The activation energy was also calculated at a low temperature range (350–650 °C) and high temperature range (above 650 °C). The values for the samples vary from 0.63 eV to 1.08 eV at low temperature and at high temperature they vary from 0.43 eV to 0.75 eV.     

Adsorption and diffusion of H2O molecule on the Be(0001) surface: A density-functional theory study

Using first-principles calculations, we systematically study the adsorption behavior of a single molecular H₂O on the Be(0001) surface. We find that the favored molecular adsorption site is the top site with an adsorption energy of about 0.3 eV, together with the detailed electronic structure analysis, suggesting a weak binding strength of the H₂O/Be(0001) surface. The adsorption interaction is mainly contributed by the overlapping between the s and pz states of the top-layer Be atom and the molecular orbitals 1b₁ and 3a₁ of H₂O. The activation energy for H₂O diffusion on the surface is about 0.3 eV. Meanwhile, our study indicates that no dissociation state exists for the H₂O/Be(0001) surface.     

Low-energy electron-induced reactions in thin films of glucose and N-acetyl-glucosamine

Reactions induced in thin films of α-d-glucose and N-acetylglucosamine by low-energy electron exposure at incident electron energies (E₀) between 5 eV and 15 eV have been investigated by high-resolution electron energy loss spectroscopy (HREELS). The reactions of α-d-glucose upon electron exposure were also studied in the presence of molecular oxygen. Electron exposure leads to characteristic changes of the vibrational spectra indicating that OH groups are lost with the formation of CC double bonds taking place preferentially above the ionisation threshold of the investigated molecules. At lower E₀, OH groups are equally decomposed suggesting that dissociative electron attachment contributes to the reactions but formation of double bonds is not observed. The results show that different reaction channels are effective depending on E₀ and that the outcome of electron-driven chemistry in saccharides may be controlled by changing from the subionisation regime to E₀ above the ionisation threshold. Generally, low-energy electron exposure in the absence of O₂ produces a material with lower oxygen content, i.e. leads to a reduction of the saccharide. In the case of N-acetylglucosamine, removal of the amide group from the sugar is also important at subionisation energies. In contrast, as shown for α-d-glucose, low-energy electron exposure in the presence of O₂ leads to oxidation of the sugar even at cryogenic temperature.     

Adsorption of small molecules on transition metal doped rhodium clusters Rh3X (X = 3d, 4d atom): a first-principles investigation

The adsorption behaviours of seven molecules (CO, CO₂, N₂, NO, O₂, N₂O and NO₂) on Rh₃X (X?=Sc-Zn, Y-Cd) clusters are systematically investigated by density-functional calculations. Rh₃X clusters exhibit physical adsorption when interacting with CO₂, CO, N₂ and NO. The adsorption energies (E_ads) can be ranked as follows: NO?>?CO?>?CO_2?≥?N₂. Compared with pure Rh₄ cluster, the adsorption capacity changes with the doping element. Chemical adsorption can be obtained for Rh₃X when adsorbing O₂, N₂O and NO₂. E_ads shows an order of E_ads(O₂)?>?E_ads(NO₂)?>?E_ads(N₂O). When O₂ is adsorbed, energy barrier with doping Tc or Cr atom is substantially reduced, which indicates that chemical reactivity of O₂ on Rh₄ can be significantly enhanced. The doped rhodium clusters can be viewed as good candidates in the discrimination between different gas molecules.     

Interaction of H2O with a clean and oxygen precovered Ni(110) surface studied by XPS

The adsorption and reaction of H₂O on clean and oxygen precovered Ni(110) surfaces was studied by XPS from 100 to 520 K. At low temperature (T<150 K), a multilayer adsorption of H₂O on the clean surface with nearly constant sticking coefficient was observed. The O 1s binding energy shifted with coverage from 533.5 to 534.4 eV. H₂O adsorption on an oxygen precovered Ni(110) surface in the temperature range from 150 to 300 K leads to an O 1s double peak with maxima at 531.0 and 532.6 eV for T=150 K (530.8 and 532.8 eV at 300 K), proposed to be due to hydrogen bonded O_ads… HOH species on the surface. For T>350 K, only one sharp peak at 530.0 eV binding energy was detected, due to a dissociation of H₂O into O_ads and H₂. The s-shaped O 1s intensity-exposure curves are discussed on the basis of an autocatalytic process with a temperature dependent precursor state.     

Hydrogen adsorption and storage of Ca-decorated graphene with topological defects: A first-principles study

As a candidate for hydrogen storage medium, geometric stability and hydrogen capacity of Ca-decorated graphene with topological defects are investigated using the first-principle based on density functional theory (DFT), specifically for the experimentally realizable single carbon vacancy (SV), 585 double carbon vacancy (585 DCV) and 555–777 double carbon vacancy (555–777 DCV) defects. It is found that Ca atom can be stabilized on above defective graphenes since Ca׳s binding energy on vacancy defect is much larger than its cohesive energy. Up to six H₂ molecules can stably bind to a Ca atom on defective graphene with the average adsorption energies of 0.17–0.39 eV/H₂. The hybridization of the Ca-3d orbitals with H₂-σorbitals and the electrostatic interaction between the Ca cation and the induced H₂ dipole both contribute to the H₂ molecules binding. Double-side Ca-decorated graphene with 585 DCV and 555–777 DCV defects can theoretically reach a gravimetric capacity of 5.2 wt% hydrogen, indicating that Ca-decorated defective graphene can be used as a promising material for high density hydrogen storage.     

Adsorption and diffusion of an Au atom and dimer on a θ-Al2O3 (001) surface

With density-functional calculations we have investigated adsorption and diffusion of an Au atom and an Au₂ dimer on a θ-Al₂O₃(001) surface. The surface structure of θ-Al₂O₃(001) has an armchair-like configuration containing flat and trench areas and the Au_n (n = 1 or 2) cluster prefers to adsorb on the flat area. A single Au atom adsorbs on an O–Al bridge site with adsorption energy 0.35 eV, whereas an Au₂ dimer bonds to the oxide with adsorption energy 0.78 eV, with one Au coordinated singly to a surface O. Formation of Au₂ from Au₁ is favored, with a negligible energy barrier. The calculated energy barriers for diffusion indicate that an Au atom diffuses more rapidly than an Au₂ dimer but both prefer to diffuse anisotropically, along the flat area of the θ-Al₂O₃(001) surface.     

A kinetic Monte Carlo/UBI-QEP model of O2 adsorption on fcc (1 1 1) metal surfaces

The previously developed kinetic Monte Carlo model of molecular oxygen adsorption on fcc (1 0 0) metal surfaces has been extended to fcc (1 1 1) surfaces. The model treats uniformly all elementary steps of the process—O₂ adsorption, dissociation, recombination, desorption, and atomic oxygen hopping—at various coverages and temperatures. The model employs the unity bond index—quadratic exponential potential (UBI-QEP) formalism to calculate coverage-dependent energetics (atomic and molecular binding energies and activation barriers of elementary steps) and a Metropolis-type algorithm including the Arrhenius-type reaction rates to calculate coverage- and temperature-dependent features, particularly the adsorbate distribution over the surface. Optimal values of non-energetic model parameters (the spatial constraint, a travel distance of “hot” atoms, attempt frequencies of elementary steps) have been chosen. Proper modifications of the fcc (1 0 0) model have been made to reflect structural differences in the fcc (1 1 1) surface, in particular the presence of two different hollow sites (fcc and hcp). Detailed simulations were performed for molecular oxygen adsorption on Ni(1 1 1). We found that at very low coverages, only O₂ adsorption and dissociation were effective, while O₂ desorption and O₂ and O diffusion practically did not occur. At a certain O + O₂ coverage, the O₂ dissociation becomes the fastest process with a rate one-two orders of magnitude higher than adsorption. Dissociation continuously slows down due to an increase in the activation energy of dissociation and due to the exhaustion of free sites. The binding energies of both molecular and atomic oxygen decrease with coverage, and this leads to greater mobility of atomic oxygen and more pronounced desorption of molecular oxygen. Saturation is observed when the number of adsorbed molecules becomes approximately equal to the number of desorbed molecules. Simulated coverage dependences of the sticking probability and of the atomic binding energy are in reasonable agreement with experimental data. From comparison with the results of the previous work, it appears that the binding energy profiles for Ni(1 1 1) and Ni(1 0 0) have similar shapes, although at any coverage the absolute values of the oxygen binding energy are higher for the (1 0 0) surface. For metals other than Ni, particularly Pt, the model projections were found to be too parameter-dependent and therefore less certain. In such cases further model developments are needed, and we briefly comment on this situation.     

Reactivity screening of silica

As a screening of the chemical activity of silica [SiO₂/Si(1 0 0)], which is one of the most often used supports for nanostructures, thermal desorption spectroscopy data have been gathered for a variety of gases such as n-nonane, n-hexane, n-butane, iso-butane, ethane, CO₂, CO, O₂, and H/H₂. Whereas, the alkanes with chain lengths larger than three adsorb with large binding energies (E_d = 50-70 kJ/mol), the activity towards the other probe molecules is negligible (<24 kJ/mol) down to adsorption temperatures of 95 K. The adsorption of n- and iso-butane has additionally been studied by molecular beam scattering and follows standard precursor mediated adsorption dynamics.     

Sticking and displacement channels in the COg + O2/Pt(111) reaction

A molecular beam of CO, impinging on a Ft surface saturated with molecular oxygen, causes displacement of O₂ molecules into the gas phase. The kinetics of the displacement and associated CO sticking have been measured for CO kinetic energies in the range 0.06-1.83 eV. At low kinetic energies the main displacement channel is associated with the sticking of CO, which by dynamic energy and momentum transfer causes O₂ molecules to leave the surface, with a probability of 0.09 per stuck CO molecule. At the highest CO kinetic energies an additional displacement channel is appearing, namely inelastic (non-sticking) scattering of CO molecules, which deposit enough energy to displace adsorbed O₂ into the gas phase.     

Electronic state of ruthenium deposited onto oxide supports: An XPS study taking into account the final state effects

The electronic state of ruthenium in the supported Ru/EO_x (EO_x = MgO, Al₂O₃ or SiO₂) catalysts prepared by with the use of Ru(OH)Cl₃ or Ru(acac)₃ (acac = acetylacetonate) and reduced with H₂ at 723 K is characterized by X-ray photoelectron spectroscopy (XPS) in the Ru 3d, Cl 2p and O 1s regions. The influence of the final state effects (the differential charging and variation of the relaxation energy) on the binding energy (BE) of Ru 3d_5/2 core level measured for supported Ru nanoparticles is estimated by comparison of the Fermi levels and the modified Auger parameters determined for the Ru/EO_x samples with the corresponding characteristics of the bulk Ru metal. It is found that the negative shift of the Ru 3d_5/2 peak which is observed in the spectrum of ruthenium deposited onto MgO (BE = 279.5-279.7 eV) with respect to that of Ru black (BE = 280.2 eV) or ruthenium supported on γ-Al₂O₃ and SiO₂ (BE = 280.4 eV) is caused not by the transfer of electron density from basic sites of MgO, as considered earlier, but by the differential charging of the supported Ru particles compared with the support surface. Correction for the differential charging value reveals that the initial state energies of ruthenium in the Ru/EO_x systems are almost identical (BE = 280.5 ± 0.1 eV) irrespectively of acid-base properties of the support, the mean size of supported Ru crystallites (within the range of 2-10 nm) and the surface Cl content. The results obtained suggest that the difference in ammonia synthesis activity between the Ru catalysts supported on MgO and on the acidic supports is accounted for by not different electronic state of ruthenium on the surface of these oxides but by some other reasons.