Effects of calcining temperature on photocatalytic activity of Fe-doped sulfated titania

Using industrial titanyl sulfate as a raw material, Fe‐doped sulfated titania (FST) photocatalysts were prepared by using the one‐step thermal hydrolysis method and characterized using XRD, SEM, TGA–DSC, FTIR, UV–Vis DRS and N₂ adsorption–desorption techniques. The effects of calcining temperature on the structure of the titania were investigated. The photocatalytic activity of the FST was evaluated using the photodegradation of methylene blue and photooxidation of phenol in aqueous solutions under UV and visible light irradiation, respectively. The results evinced that Ti⁴⁺ is substituted by Fe³⁺ in titania lattice and forms impurity level within the band gap of titania, which consequently induces the visible light absorption and visible‐light‐driven photocatalytic activity. The synergistic effects of Fe‐doping and sulfation are beneficial to the efficient separation of the photogenerated carriers and also improve the quantum efficiency of photocatalysis. In addition, Brönsted acidity arisen from the strong inductive effect of sulfate is also conducive to enhancing the photocatalytic performance of FST. However, when the calcining temperature is higher than 800°C, sulfur species and surface hydroxyl groups decompose and desorb from FST and the specific surface area decreases sharply. Moreover, severe sintering and rutile phase formation occur simultaneously. All these are detrimental to photocatalytic activity of FST.     

Synthesis and characterization of ZnO-doped cupric oxides and evaluation of their photocatalytic performance under visible light

ZnO–CuO binary oxide photocatalysts were synthesized by the liquid phase coprecipitation method. The catalysts were characterized by X-ray diffraction, transmission electron microscopy and UV–vis spectroscopy. The photocatalytic activity of the ZnO–CuO nanocomposites was estimated on the basis of decoloration of methyl orange dye under visible light. The effects of parameters such as calcining temperature, amount of catalyst and pH on the photocatalytic degradation efficiency of methyl orange solutions were investigated in detail. The maximum photocatalytic activity was obtained on ZnO–CuO nanocomposites with a calcining temperature of 350 °C, using a catalyst amount of 0.056 g/L and a pH of 7.5. The visible light-driven capability of ZnO–CuO nanocomposites is much better than that of commercially available TiO₂ photocatalysts under comparable conditions.     

Preparation of nanocrystalline Fe-doped TiO<Subscript>2</Subscript> powders as a visible-light-responsive photocatalyst

Nanocrystalline Fe-doped TiO₂ powders were prepared using TiOSO₄, urea, and Fe(NO₃)₃ · 9H₂O as precursors through a hydrothermal method. The as-synthesized yellowish-colored powders are composed of anatase TiO₂, identified by X-ray diffraction (XRD). The grain size ranged from 9.7 to 12.1 nm, calculated by Scherrer’s method. The specific surface area ranged from 141 to 170 m²/g, obtained by the Brunauer–Emmett–Teller (BET) method. The transmission electron microscopy (TEM) micrograph of the sample shows that the diameter of the grains is uniformly distributed at about 10 nm, which is consistent with that calculated by Scherrer’s method. Fe³⁺ and Fe²⁺ have been detected on the surface of TiO₂ powders by X-ray photoelectron spectroscopy (XPS). The UV–Vis diffuse reflection spectra indicate that the light absorption thresholds of the Fe-doped TiO₂ powders have been red-shifted into the visible light region. The photocatalytic activity of the Fe-doped TiO₂ was evaluated through the degradation of methylene blue (MB) under visible light irradiation. The Fe-doped TiO₂ powders have shown good visible-light photocatalytic activities and the maximum degradation ratio is achieved within 4.5 h.     

TiO<Subscript>2</Subscript>/TiO<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript>N<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> nanocomposite and its acetaldehyde photodecomposition ability

Nitrogen-doped titania was coupled with the commercial titania nanoparticles by mechanical milling in liquid medium. The as-prepared nanocomposites (TiO₂/TiO_2−x N _y ) were characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) specific surface area, UV–Vis spectroscopy, chemiluminescence, and acetaldehyde decomposition activity techniques. When a small amount of nitrogen-doped titania was added into the commercial titania, higher intensity and longer lifetime of ¹O₂ was observed, and the photocatalytic activity was efficiently improved. The TiO_2−x N _y acts as the acceptor of photoinduced holes. The recombination of the electron-hole was effectively depressed by the heterogeneous electron transfer. This could be an effective way to obtain highly active photocatalysts.     

Photocatalytic degradation of methylene blue and phenol on Fe-doped sulfated titania

Fe-doped sulfated titania (FST) photocatalysts with high photocatalytic activity were prepared from industrial titanyl sulfate solution and characterized using X-ray diffraction (XRD), thermogravimetry analysis?Cdifferential scanning calorimeter (TGA-DSC), Fourier transform infrared spectroscopy (FT-IR), and nitrogen adsorption?Cdesorption techniques. The photocatalytic activity of the FST photocatalyst was evaluated using the photodegradation of methylene blue (MB) and the photooxidation of phenol in aqueous solutions in the presence of UV irradiation, respectively. The effect of various parameters, such as calcining temperature, calcination time, initial concentration of substrate, amount of catalyst and pH value on the photocatalytic activity of FST photocatalyst was investigated. Among the parameters studied, calcining temperature, initial concentration of substrate, and amount of catalyst have a very similar effect on the activity of FST photocatalyst for both the photodegradation of MB and the photooxidation of phenol, while the others have distinct differences. The optimal calcination conditions were 500?°C, 1.5?h and 650?°C, 2.5?h; the optimal catalyst concentration were 1.0 and 1.2?g?L^?1; the optimal pH values were 8 and 4 for the photodegradation of MB and the photooxidation of phenol, respectively. In addition, the mechanism for the high photocatalytic efficiency of FST photocatalyst has also been put forward.     

Simple preparation of Mn–N-codoped titania photocatalyst with visible light response

Mn–N-codoped TiO₂ nanocrystal photocatalysts responsive to visible light were synthesized for the first time by a simple hydrothermal synthesis method. X-ray powder diffraction (XRD) measurement indicated that all the photocatalysts have an anatase crystallite structure, and that increase of the doping concentration had little effect on the structure and particle size. Compared to N-doped TiO₂, a shift of the absorption edge of Mn–N-codoped TiO₂ to a lower energy and a stronger absorption in the visible light region were observed. The Mn–N-codoped TiO₂ showed higher photocatalytic reactivity than undoped TiO₂ or N-doped TiO₂ for the photodegradation of rhodamine B (RhB) under visible light irradiation. The highest photocatalytic activity was achieved on 0.4 mol% Mn–N–TiO₂ calcined at 673 K.     

Characterization and activity of visible light–driven TiO<Subscript>2</Subscript> photocatalysts co<Emphasis Type="Bold">-</Emphasis>doped with nitrogen and lanthanum

Nitrogen and lanthanum co-doped titania photocatalysts were prepared by a modified sol–gel process with urea and lanthanum nitrate doping precursors and characterized by various techniques including XRD, FTIR, TEM, EDS, and UV–Vis DRS. The average crystallite size was ca. 12–15 nm as calculated from XRD patterns, and anatase was the dominant crystalline type in the as-prepared samples. The UV–Vis DRS of the samples revealed significant absorption within the range of 400–500 nm. The optimum composition of N(0.020)La(0.012)TiO₂ exhibited the highest photocatalytic activity for degradation of methyl orange (MO) aqueous solution under simulated sunlight. The percent degradation of MO was ca. 97% for N(0.020)La(0.012)TiO₂ under simulated sunlight irradiation for 9 h. The enhanced photocatalytic activity was ascribed to the synergistic effects of the nitrogen and lanthanum co-doping.     

Photodegradation of Direct Blue-199 in carpet industry wastewater using iron-doped TiO2 nanoparticles and regenerated photocatalyst

Fe-doped TiO_2, Ti_1–xFe_xO₂ (x = 0.00, 0.02, 0.04, 0.06, 0.08, and 0.10), photocatalysts have been successfully synthesized via citric acid–assisted autocombustion method. The synthesized photocatalysts were characterized using different characterization techniques, such as X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), Fourier transform infrared (FT-IR), transmission electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDX), and x-ray photoelectron spectroscopy (XPS). The XRD diffraction patterns revealed that synthesized photocatalysts have the anatase phase of TiO₂. The DRS analysis indicates a slight increment in absorbance in the visible light region by the Fe doping in TiO₂. The FT-IR spectra reveal the various stretching and bending vibrational bands of the Ti–O lattice. The XPS spectra confirm the presence of elements titanium, oxygen, and iron in the synthesized samples and determine binding energy of elements. TEM analysis shows the shape of the synthesized photocatalyst, and it was used to calculate the average particle sizes of undoped and Fe-doped TiO₂ (Ti_0.96Fe_0.04O₂) photocatalysts using a histogram. The photocatalytic activities of synthesized photocatalysts were determined by photodegradation of dye (Direct Blue 199), contaminating carpet industry wastewater in the photochemical reactor and open pan reactor. The maximum photodegradation activity was shown by the Ti_0.96Fe_0.04O₂ photocatalyst among all the synthesized undoped and Fe-doped photocatalysts. The synthesized photocatalyst (Ti_0.96Fe_0.04O₂) had better photocatalytic activity when compared to both, undoped TiO₂ and Aeroxide (Degussa) P-25. The used Fe-doped TiO₂ photocatalyst (Ti_0.96Fe_0.04O₂) was regenerated five times and investigated for its photocatalytic activity.     

F and Fe co-doped TiO2 with enhanced visible light photocatalytic activity

Four different sols, pure TiO₂, F doped TiO₂, Fe doped TiO₂, and F–Fe co-doped TiO₂ sols, were prepared by peroxidation at low temperature. The crystal structure, morphology, light adsorption, and photocatalytic properties of the pure and doped TiO₂ were examined by X-ray diffraction, transmission electron microscopy, and ultraviolet–visible spectrophotometry. The relationship between the average size, crystal type, range of visible light absorption, and photocatalytic activity and content and type of doped ions were investigated. The results showed that the average size of the F–Fe co-doped TiO₂ composed of both the anatase and rutile phases was the same as that of pure TiO₂. Furthermore, the visible light photocatalytic activity of the F–Fe co-doped TiO₂ was significantly improved over pure TiO₂, F-doped TiO₂, and Fe-doped TiO₂ due to the large red shift in the light adsorption edge.     

Preparation of novel visible-light-driven In<Subscript>2</Subscript>O<Subscript>3</Subscript>–CaIn<Subscript>2</Subscript>O<Subscript>4</Subscript> composite photocatalyst by sol–gel method

Novel visible-light-activated In₂O₃–CaIn₂O₄ photocatalysts were developed in this paper through a sol–gel method. The photocatalytic activities of In₂O₃–CaIn₂O₄ composite photocatalysts were investigated based on the decomposition of methyl orange under visible light irradiation (λ > 400 nm). The obtained samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrum (EDS), X-ray photoelectron spectroscopy (XPS) and UV–vis diffused reflectance spectroscopy (DRS). The results revealed that the In₂O₃–CaIn₂O₄ composite samples with different In₂O₃ and CaIn₂O₄ content can be obtained by controlling the synthesis temperature, and the composite photocatalysts extended the light absorption spectrum toward the visible region. The photocatalytic tests indicated that the composite samples demonstrated high visible-light activity for decomposition of methyl orange. The significant enhancement in the In₂O₃–CaIn₂O₄ photo-activity under visible light irradiation can be ascribed to the efficient separation of photo-generated carriers in the In₂O₃ and CaIn₂O₄ coupling semiconductors.     

Preparation of Er3+:YAlO3/Fe-doped ZnO composite and investigation on solar light photocatalytic degradation of organic dyes

The Er³⁺:YAlO₃/Fe-doped ZnO composite, a new photocatalyst which could effectively utilize visible light, was prepared. In succession, the Er³⁺:YAlO₃/Fe-doped ZnO was characterized by XRD and SEM, respectively. Acid Red B dyes, was degraded under solar light irradiation to evaluate the photocatalytic activity of the Er³⁺:YAlO₃/Fe-doped ZnO. In addition, the effects of Er³⁺:YAlO₃ content, heat-treatment temperature and time on the photocatalytic activity of Er³⁺:YAlO₃/Fe-doped ZnO were reviewed. Otherwise, the effect of initial dye concentration, Er³⁺:YAlO₃/Fe-doped ZnO amount and solar light irradiation time on the photocatalytic degradation of Acid Red B were also investigated. It was found that the photocatalytic activity of Er³⁺:YAlO₃/Fe-doped ZnO is much higher than that of Fe-doped ZnO and pure ZnO for the similar system. Perhaps, the use of the Er³⁺:YAlO₃/Fe-doped ZnO may provide a new way to take advantage of ZnO in sewage treatment aspects using solar energy.     

Investigation of Br–N Co-doped TiO<Subscript>2</Subscript> photocatalysts: preparation and photocatalytic activities under visible light

Bromine (Br) and nitrogen (N) co-doped TiO₂ ((Br–N–TiO₂) photocatalysts were prepared by a sol–gel method. The catalysts were characterized by X-ray Diffraction (XRD), N₂ adsorption and desorption isotherms, X-ray Photoelectron Spectra (XPS), UV-Vis Diffraction Spectra and Electron Spin Response (ESR) Spectra. Experiments on photodegradation of Methylene Blue (MB) and Sulfosalicylic Acid (SSA) under visible light were carried out to evaluate the photocatalytic activities of the catalysts. Chemical Oxygen Demand (COD) analysis was also conducted to evaluate the mineralization degrees of the catalysts in MB photodegradation. Enhanced photocatalytic activities were observed for the Br–N–TiO₂ catalysts in the experiments of MB and SSA photodegradation. A possible mechanism was proposed to explain the improved photocatalytic activities of the Br–N–TiO₂ catalysts.     

水热法合成掺杂铁离子的小管径TiO2纳米管

碳纳米管这种一维结构的新材料的发现为物理、化学、材料科学和纳米科学开辟了全新的研究领域.近年来,非碳无机类富勒烯(Inorganic Fullerenelike,简称IF)纳米管也受到人们的广泛关注.     

Visible light photocatalytic activity and Photoelectrochemical property of Fe-doped TiO<Subscript>2</Subscript> hollow spheres by sol–gel method

Fe-doped TiO₂ hollow spheres (Fe-THs) were synthesized by sol–gel process using carbon spheres as templates. The prepared samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV–vis diffuse reflectance spectrum (DRS), N₂ adsorption–desorption isotherms, Electron paramagnetic resonance (EPR) spectroscopy and Photoluminescence emission spectroscopy (PL). UV–vis spectra showed that Fe³⁺ doping could extend the absorption edge to the visible region. EPR spectra showed that Fe³⁺ was incorporated into the crystal lattice of TiO₂, which could inhibit the recombination of photo-induced electron–hole pairs and improve the photocatalytic activity. The photocatalytic activities of the prepared samples were evaluated for the degradation of dye Reactive Brilliant Red X-3B (C.I. reactive red 2) under visible light irradiation. The results indicated that Fe³⁺ doping sample showed the highest photocatalytic activity with an optimal doping concentration of 0.50 wt%. The recycle ability of the Fe-THs was also investigated. After 5 cycles, the degradation rate was still higher than 90%, decreased by only 6.36% compared to the first cycle. Moreover, in order to characterize the electron-transferring efficiency in the process of photocatalysis reaction, a photocurrent-time spectrum was examined by anodic photocurrent response.     

Phosphorous,nitrogen, and molybdenum ternary co-doped TiO2: preparation and photocatalytic activities under visible light

P, N, and Mo ternary co-doped nano TiO₂ photocatalysts ((P, N, Mo)-TiO₂) were prepared by a single step sol–gel method, which show much enhanced photocatalytic activities over Mo-TiO₂, (P, N)-TiO₂, un-doped TiO₂ and Degussa P25 under visible light irradiation. The degradation rate of 0.72Mo–P-TiO₂ is as high as 65.3%, which is about 6.7 times of that of Degussa P25. Possible reasons for the improvement of photocatalytic activities were analyzed.     

Sol-gel preparation of Fe-doped mixed crystal TiO<Subscript>2</Subscript> powder and its photocatalytic activity for degradation of azo fuchsine under visible light irradiation

In this work, the Fe-doped mixed crystal TiO₂ photocatalyst which can utilize visible light was prepared by sol-gel and heat-treated methods. During heat-treatment, the phase transformation of Fe-doped TiO₂ powder occurs and the process is characterized by XRD and TG-DTA technologies. Otherwise, the sizes and shapes of Fe-doped and undoped TiO₂ powders were also compared using TEM images. The azo fuchsine in aqueous solutions, as a model compound, was treated under visible light irradiation using Fe-doped mixed crystal TiO₂ powders as photocatalyst. The results showed that, under visible light irradiation, the (0.25%) Fe-doped mixed crystal TiO₂ powder heat-treated at 600°C for 3.0 h behaved very high photocatalytic activities for degradation of azo fuchsine. The remarkable improvement of the photocatalytic activity of TiO₂ powder was elucidated through the cooperative effects of iron doping and phase transformation. The iron doping can restrain the recombination of photogenerated electron-hole pairs and the phase transformation can enhance the absorption of visible light. Furthermore, other influence factors such as azo fuchsine concentration, solution acidity, Fe3+ ion content and irradiation time were also studied. Thus, this method is applicable for the treatment of wastewater.     

Visible light-induced photocatalysis through surface plasmon excitation of platinum-metallized titania for photocatalytic bleaching of rhodamine B

Abstract  

Nanocomposites consisting of titania nanoparticles and metallic platinum were prepared via a soft chemical reduction method. The detailed structural, compositional, and optical characterization and physicochemical properties of the obtained products were analyzed by X-ray diffraction, nitrogen adsorption, Raman spectroscopy, UV–Vis diffuse reflectance spectroscopy, photoluminescence spectroscopy, and FT-IR spectroscopy techniques. Employing photodegradation of rhodamine B as the model reaction, we found that the as-prepared Pt/TiO₂ nanocomposite showed an excellent photocatalytic oxidation activity under visible light irradiation. On the basis of these results, the intrinsic mechanism of visible light-induced photocatalytic oxidation of organic compounds on the platinized titania is proposed and discussed. The superior visible light-driven photocatalytic efficiency of the Pt/TiO₂ nanocomposite photocatalyst can be ascribed to the high efficiency of charge-pair separation due to the presence of deposited Pt serving as electron sinks to retard the rapid e⁻–h⁺ couple recombination; the good photoabsorption capacity in the visible light region; and the higher concentration of surface hydroxyl groups, which are able to effectively scavenge photogenerated valence band holes. Accumulation of the holes at the catalyst surface increases the probability of the formation of OH· as a reactive species that readily oxidizes the organic dye molecule.     

Photocatalytic degradation of organic dyes by Er<Superscript>3+</Superscript>: YAlO<Subscript>3</Subscript>/Co- and Fe-doped ZnO coated composites under solar irradiation

In this work, the Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites were prepared by the sol-gel method. Then, they were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDX). Photo-degradation of azo fuchsine (AF) as a model dye under solar light irradiation was studied to evaluate the photocatalytic activity of the Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites. It was found that the photocatalytic activity of Co- and Fe-doped ZnO composites can be obviously enhanced by upconversion luminescence agent (Er³⁺: YAlO₃). Besides, the photocatalytic activity of Er³⁺: YAlO₃/Fe-doped ZnO is better than that of Er³⁺: YAlO₃/Co-doped ZnO. The influence of experiment conditions, such as the concentration of Er³⁺: YAlO₃, heat-treatment temperature and time on the photocatalytic activity of the Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites was studied. In addition, the effects of solar light irradiation time, dye initial concentration, Er³⁺: YAlO₃/Co- and Fe-doped ZnO amount on the photocatalytic degradation of azo fuchsine in aqueous solution were investigated in detail. Simultaneously, some other organic dyes, such as Methyl Orange (MO), Rhodamine B (RM-B), Acid Red B (AR-B), Congo Red (CR), and Methyl Blue (MB) were also studied. The possible excitation principle of Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites under solar light irradiation and the photocatalytic degradation mechanism of organic dyes were discussed.     

Visible light active anion codoped sol gel titania photocatalyst for pollutant degradation

The photocatalytic activity of carbon and nitrogen co-doped sol gel TiO₂ is tested using methyleneblue degradation and it is found that the activity drops sharply with increase in calcination temperature. The system calcined at 300 °C was found to be the most efficient in dye degradation and can be considered as a good candidate for the future photocatalytic applications. This highly active anion doped TiO₂ is found to show amorphous nature. Elemental analysis reveals the co existence of C and N dopants, which may be responsible for the high efficiency of the catalyst. Visible absorbance is evident from the UV–VIS Diffuse Reflectance Spectra. The N₂ adsorption desorption studies show the H1 hysteresis loops and a well defined mesoporous nature is observed for the catalytic systems prepared in the presence of urea. XPS analysis indicates the presence of Ti–C and Ti–N bonds which are responsible for the visible light activity of the photocatalysts.     

Cu-grafted TiO2 photocatalysts: effect of Cu on the action spectrum of composite materials

This paper describes a simple technique for the modification of titania with copper to enhance its photocatalytic performance. In addition to the absorption of UV light resulted in band-to-band excitation of electrons, TiO₂ grafted with copper species absorbs radiation in the visible region of spectrum, and it is able to completely oxidize volatile organic pollutants both under UV and visible light. The action spectra of pristine and Cu-grafted TiO₂ photocatalysts are measured and discussed to elucidate the reasons for appearance of the activity under visible light.