毛细管电泳多脉冲溶出安培检测方法的研究

 摘要：将用于电化学检测的三电极与驱动电泳分离的电化学系统的接地电极在毛细管出口处的外面作适当的布置,可最大程度地减少高压电场对安培检测的干扰。多阶脉冲溶出安培检测方式提高了电流检测灵敏度,并可在一定程度上通过不同的溶出电位鉴别分离组分。将该方法应用于铜、锌、铅、铊、镉等离子的毛细管电泳分离,得到了较满意的结果。     

Internal standard in flow injection analysis with amperometric detection

In this work, we describe for the first time the use of the internal standard method in flow injection analysis (FIA) with amperometric detection. The method is based on the application of sequential potential pulses to the working electrode in an electrochemical flow cell. The sequence of potential pulses is selected in such a way that the analyte and internal standard compound are detected and monitored individually and independently at the same working electrode. This approach compensates for random errors associated with variations of flow rate, injection volume, ionic strength difference between standards and samples, and accidental insertion or formation of air bubbles in the carrier stream. In addition, this method can overcome the major drawback of amperometric detection using solid electrodes, which is gradual electrode passivation. To illustrate the potential of this method, the flow-injection amperometric detection of uric acid using [Fe(CN)₆]^3? as an internal standard (IS) is presented as an example.     

聚乙烯吡烙烷酮修饰碳糊电极-双通道毛细管电泳安培法测定环境中的硝基酚

建立了几种硝基酚的聚乙烯吡烙烷酮修饰碳糊电极-双通道毛细管电泳安培检测的新方法.采用双工作电极和两台伏安仪,将样品的检测电位分别设定在氧化电位(+0.5V_vs.SCE)和还原电位(-1.4V_vs.SCE),在一个检测池中同时获得所有样品的氧化和还原信息,以还原电流和氧化电流值之比(Nc=ir/io)作为定性依据,对样品的纯度进行确证.通过优化工作电极、检测电位、缓冲溶液、β-CD和乙醇浓度等实验参数,实现了几种硝基酚的分离检测,同时采用样条小波最小二乘法对样品数据信号进行处理,并将此法应用于实际样品的测定.     

Amperometric enzyme electrodes in analytical chemistry

Summary An overview is given of works on the construction and application of amperometric enzyme electrodes for the determination of metabolites in biological solutions. The following electrodes are dealt with: monoenzyme and polyenzyme electrodes involving amperometric detection of hydrogen peroxide, bienzyme electrodes with oxidase-peroxidase, electrodes based on organic metals and chemically modified electrodes, dehydrogenase electrodes, amperometric hydrolase electrodes and highly sensitive electrodes involving chemical amplification. Biocatalytic stripping and macrokinetic behaviour of the electrodes are discussed.

---

Amperometrische Enzymelektroden in der analytischen Chemie

     

新型芯片电泳柱端安培检测系统的构建与评价

自行设计开发了一套便于与电泳芯片集成的一体式柱端安培检测池系统．该系统由整块透明有机玻璃精密加工而成,包括电泳芯片支架和安培检测池两部分,芯片可通过芯片插槽和不锈钢夹具固定在芯片支架上,各种检测用电极可直接通过螺母固定在安培检测池中．以100μmol／L的DA为模式分析物,分别采用直径为100、300和500μm的铂金圆盘电极与表观直径为240μm的碳纤维电极作为工作电极均在该装置上实现了良好组装和高灵敏检测．采用碳纤维工作电极对该系统的检测参数进行了优化．测试结果表明该系统在电化学清洗程序下连续六次测定100μmol／L多巴胺的峰电流相对标准偏差为3．2％,保留时间相对标准偏差为0．5％,DA的检测限为0．4μmol／L（按照S／N=3计）．该系统体积小巧,测试稳定,检测灵敏度较高,工作电极更换方便,适合作为芯片电泳柱端安培检测通用平台．     

Recent developments in electrochemical flow detections—A review: Part I. Flow analysis and capillary electrophoresis

Recent years have provided numerous new examples of applying flow-through electrochemical detectors in chemical analysis. This review, based on about 250 original research papers cited from the current analytical literature, presents their application in flow analysis and capillary electrophoretic methods. Example applications are also given for arrays of electrochemical sensors in flow analysis and electrochemical detection in microfluidic systems. Potentiometric detection with ion-selective electrodes predominates in flow analysis carried out mostly in a flow-injection system, while amperometric and conductivity detections are most commonly employed in capillary electrophoresis.     

A new capillary electrophoresis end-column amperometric detection system without the need for capillary/electrode alignment

A self-aligning end-column amperometric detection system for capillary electrophoresis was constructed. In this system, the electrode and capillary were exchanged easily and the capillary/electrode alignment procedure is not required. Gold, gold/mercury amalgam, copper and carbon fiber could be used as the working electrode. The principle is in the use of two disk holders with the capillary and the electrode in the center, so that by inserting the disk holders into a groove in the working electrode port, the capillary and the electrode are automatically aligned and the distance between the capillary and the electrode is assured at 0.24 mm. The relative standard deviation obtained using five different gold/mercury amalgam microdisk electrodes for determination of cysteine was 1.5% for the migration time and 3.3% for the electrophoretic peak current. The simple and convenient system was attractive for the routine analysis by capillary electrophoresis with electrochemical detection. The system was applied to the determination of promethazine hydrochloride in human serum.     

Capillary electrophoresis and capillary flow injection analysis with electrochemical detection

Measurements by capillary flow injection analysis (CFIA) and capillary electrophoresis (CE) in conjunction with electrochemical detection are described. The detection is based on an end-column electrode arrangement. Several novel electrodes, such as a spherical gold electrode and a dual-microdisk electrode, are presented and characterized regarding their analytical utility. In order to improve the selectivity of CFIA, dual-electrode and multiple-pulse detection are studied using couples of cyanometallates or metallocenes. Capillary electrophoretic experiments with amperometric detection are performed using 50 m i.d. capillaries without any electrical-field decoupler. The practicality and analytical characteristics of this detection strategy are illustrated for the separation of serotonin and some biological precursors and metabolites of neurotransmitter substances.     

Use of disposable gold working electrodes for cation chromatography-integrated pulsed amperometric detection of sulfur-containing amino acids

We have prepared disposable thin-film gold working electrodes on polymeric substrates. Our microfabrication process allows for inexpensive and reproducible mass production of such electrodes. We utilize this new type of electrode in flow-through electrochemical cells to replace the conventional non-disposable gold working electrodes for integrated pulsed amperometric detection (IPAD) of compounds separated by high-performance cation-exchange chromatography. Using two S-containing amino acids (homocysteine and cysteine) as test compounds, we have modified a previously reported waveform for optimum performance with disposable gold electrodes. With the help of the same two test substances we have characterized the analytical performance of disposable gold electrodes under the new conditions. Compared to non-disposable working electrodes, the disposable working electrodes generated equal or better results in the limit of detection, linearity of calibration and reproducibility. When used with a new IPAD waveform, the disposable electrodes functioned reproducibly for 3 days. At the end of the specified usage period of 3 days, the disposable electrodes are simply replaced. Reconditioning by polishing is thus no longer required.     

Analysis of inorganic and small organic ions by CE with amperometric detection

Capillary electrophoresis has become a widely useful analytical technology. Amperometric detection is extensively employed in capillary electrophoresis for its many inherent virtues, such as rapid response, remarkable sensitivity, and low cost of both detectors and instrumentations. Analysis of inorganic and small organic ions by capillary electrophoresis is an important research field. This review focuses on the recent developments of capillary electrophoresis coupled with amperometric detection for analysis of inorganic and small organic ions. Advancements in electrophoresis separation modes, amperometric detection modes, working electrodes, and applications of inorganic ions, amino acids, phenols, and amines are discussed.     

农药残留的安培检测法

建立灵敏高效的农药分析方法对于有效解决由农残超标引起的食品卫生安全和环境污染等问题具有重要意义。安培检测法作为一种简便、快速、灵敏、准确的电化学方法,最近几年来被越来越多地应用于农药分析研究,其研究热点主要集中于通过对电化学体系中工作电极的选择和优化来改善检测的性能,提高灵敏度,降低检测限。本文根据检测体系中工作电极的分类从常规电极、修饰电极以及微电极等3方面对农药残留安培检测体系的研究进展作了综述,并认为集成便携化是农残电化学检测方法的研究发展趋势。     

Gas Diffusion Electrodes for Use in an Amperometric Enzyme Biosensor

The preparation of gas diffusion electrodes and their use in an amperometric enzyme biosensor for the direct detection of a gaseous analyte is described. The gas diffusion electrodes are prepared by covering a PTFE membrane (thickness 250 μm, pore size 2 μm, porosity 35%) with gold, platinum, or a graphite/PTFE mixture. Gold and platinum are deposited by e‐beam sputtering, whereas the graphite/PTFE layer is prepared by vacuum filtration of a respective aqueous suspension. These gas diffusion electrodes are exemplarily implemented as working electrodes in an amperometric biosensor for gaseous formaldehyde containing NAD‐dependent formaldehyde dehydrogenase from P. putida [EC. 1.2.1.46] as enzyme and 1,2‐naphthoquinone‐4‐sulfonic acid as electrochemical mediator. The resulting sensors are compared with regard to background current, signal noise, linear range, sensitivity, and detection limit. In this respect, sensors with gold or graphite/PTFE covered membranes outclass ones with platinum for this particular analyte and sensor configuration.     

Comparison between a differential amperometric detector in the reductive mode and a u.v. detector in high-performance liquid chromatography with vitamin K3 as test compound

The amperometric detector is superior to the u.v. detector in terms of the limit of detection (less than 0.5 ng) and true linearity of response when vitamin K3 (menadione) is used as the test compound with a reversed-phase column. However, the high uncompensated resistance between the reference and working electrodes caused by the low conductivity of the mobile phase, restricts the upper limit of the linear range of the differential amperometric detector to about 200 ng of menadione.     

Pulsed amperometric detection of carbohydrates on an electrophoretic microchip

The first report of pulsed amperometric detection (PAD) on an electrophoretic microchip is presented. A hybrid poly-(dimethylsiloxane)/glass device was coupled with a platinum working electrode for the electrochemical detection of glucose, maltose, and xylose. Under optimized detection conditions, glucose was found to respond linearly from 20 to 500 microM with a measured detection limit of 20 microM. The coupling of PAD with a microchip provides a straightforward approach to the analysis of a wide range of carbohydrates using microfluidics.     

Deviceless decoupled electrochemical detection of catecholamines in capillary electrophoresis using gold microband array electrodes

Samples containing microM concentrations of dopamine, (+/-)-isoproterenol, para-aminophenol and chlorogenic acid have been separated by capillary electrophoresis (CE) and detected using end-column amperometric detection based on a novel decoupling method. The present decoupling approach involves the use of an electrochemical detector chip containing an array of microband electrodes where the working and reference electrodes are positioned only 10 microm from each other. The short distance between the working and reference electrodes ensures that both electrodes are very similarly affected by the presence of the CE electric field. With this method, no shift in the detection potential was seen when the CE high voltage was applied. This eliminated the need for a reoptimization of the detection potential to compensate for the influence of the separation voltage on the detection. It is also demonstrated that catecholamines can be detected using gold microband electrodes by careful adjustment of the detection potential to avoid the formation of gold oxide. Such careful adjustments of the detection potential are straightforward using the present decoupling method.     

Simultaneous microchip enzymatic measurements of blood lactate and glucose

A miniaturized capillary electrophoretic (CE) microchip device for the simultaneous measurements of lactate and glucose is described. The new microchip bioassay protocol integrates an electrophoretic separation of lactate and glucose, post-column enzymatic reactions of these metabolites with their respective oxidase enzymes, and an amperometric (anodic) detection of enzymatically-liberated hydrogen peroxide at a gold-coated thick-film carbon detector. Factors influencing the response have been examined and optimized, and the analytical performance has been characterized. Applicability of the microchip assay to clinical samples, such as serum and blood, is demonstrated. The microchip protocol obviates cross enzymatic reactions and interferences from major oxidizable constituents common to dual glucose-lactate enzyme electrodes. Such ability to rapidly separate and quantitate lactate and glucose on a small microchip platform should find important clinical and biotechnological applications.     

毛细管电泳安培型电化学检测法

本文评述了近年来安培型电化学检测法在毛细管电泳中的发展概况，归纳了二种检测方式及其装置的结构特点。阐述了金属电极、液膜电极和修饰电极等在电化学检测应用研究中的作用以及此方法在微区分析、活体分析中的重要意义，并展望了其发展前景。     

Application of screen printed electrodes in biochemical analysis

Screen printing technology has been used for the production of amperometric devices. The materials chosen were conventional thick film materials, (i.e. Al₂O₃-ceramic substrates and pastes of different composition, fired at 850°C). The working and the auxiliary electrodes were made by screen printing Pt paste, the connecting lines and reference electrodes in the three electrode system by printing AgPd paste. Enzymes were immobilised on the working electrodes either by cross-linking with glutaraldehyde or by adsorption in a screen printable graphite based paste. For both procedures the composition of the immobilisation matrix had to be optimised for each enzyme. It was observed that the achievable lower detection limits and standard deviations between different enzyme electrodes were lower when the enzymes were cross linked with glutaraldehyde, whereas the sensitivities were comparable for both immobilisation techniques and were improved further by the application of additional membranes acting as diffusion barriers. Stabilities of the enzyme electrodes were improved by electrode treatment (such as silanisation of the electrodes), optimisation of the measuring conditions and composition of the storage buffer.     

A direct comparison of amperometric gas sensors with gas-diffusion and ion-exchange membrane based electrodes

The effect of the nature of the working electrode used in amperometric gas sensors on the performance criteria of sensitivity, detection limit, gas flow rate and humidity dependence was evaluated. The arrangement based on metallized ion-exchange membranes (Nafion) was compared with gas-diffusion electrodes based on porous poly(tetrafluoroethylene) (PTFE) with metallic electrodes deposited on the rear side. Two representative analyte gases were chosen: SO2, which has fast reaction kinetics, and NO, which has slow reaction kinetics. It was found that both types of electrodes showed a similar performance. A dependence on the flow rate of the sample gas was found in both cases. The sensitivities were higher for the ion-exchange membrane-backed electrodes; however, the 3sigma detection limits were all in the lower ppb range and for NO were significantly lower on the Nafion membrane than on the PTFE membrane. The Nafion electrode was found to show a dependence on the relative humidity of the gas stream, but not the PTFE-based electrode.     

Periodically interrupted amperometry at membrane coated electrodes: a simplified pulsed amperometry

Amperometric detection combined with separation technique or with selective molecular recognition step can be very effective solving quantitative analytical tasks. When the amperometric working electrode surface needs cleaning or reactivation, pulsed amperometric technique can be the choice. Coating working electrodes with different sensitizing or protecting layer is quite common in the practice of voltammetric analysis. In these studies the behavior of coated electrodes using a simplified pulsed amperometric working program which can be named periodically interrupted amperometric (PIA) detection has been investigated. Rotating platinum, and carbon paste electrodes coated with dialysis film or porcine intestinal membrane were used in the experiments. The signal in case of electrochemical oxidation of hydrogen peroxide and ascorbic acid at convective conditions has been evaluated. The signal, obtained with conventional amperometry has been compared with signal collected with a periodically interrupted amperometric measuring program, allowing time for the diffusion to reload the diffusion layer at the electrode surface. The sensitivity and the lower limit of detection (4.5 × 10⁻⁷ M for ascorbic acid and 2 × 10⁻⁶ M for H₂O₂) proved superior in case of the periodically interrupted amperometry.