Study of initial segment of turbulent jets of various gases in a parallel air stream

Results are presented of a study of the gasdynamic parameters and the geometric characteristics of the mixing zone of axisymmetric jets of gases of differing density (Freon-12, air, and helium) propagating in a parallel air stream, within the limits of the initial segment (0x/R3–30). Experimental data are presented on the effect of different densities (0. 27 n8.2) and velocities (0m1.7) of the gas jet and the parallel stream on the mixing process.     

Interpolation formulas for maxwell viscosity of certain metals as a function of shear-strain intensity and temperature

The purpose of this study is the construction of interpolation formulas for the dependence of Maxwell viscosity, a quantity which is the reciprocal of shear-strain relaxation time , on shear-strain intensity and temperature for several metals: iron, aluminum, copper, and lead. This function was interpolated in various temperature and deformation velocity ranges in accordance with available experimental data for iron (0 10⁷ sec^–1, 200 ° T 1500 °); aluminum (0 10⁷ sec^–1, 300 ° T 900 °); copper (0 10⁵ sec^–1, 300 ° T 1300 °); lead (0 10⁶ sec^–1, 90 ° T 400 °); temperatures in °K.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 4, pp. 114–118, July–August, 1974.     

Hypersonic flow past blunt-edged delta wings

A method is proposed for calculating hypersonic ideal-gas flow past blunt-edged delta wings with aspect ratios = 100–200. Systematic wing flow calculations are carried out on the intervals 6 M 20, 0 20, 60 80; the results are analyzed in terms of hypersonic similarity parameters.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 175–179, September–October, 1990.     

Analysis of slip and temperature jump coefficients in a binary gas mixture

The possibility of simplifying the formulas obtained by the Maxwell-Loyalka method for the velocity _u, temperature _T and diffusion _d slip coefficients and the temperature jump coefficient in a binary gas mixture with frozen internal degrees of freedom of the molecules is considered. Special attention is paid to gases not having sharply different physicochemical properties. The formulas are written in a form convenient for use without linearization in the thermal diffusion coefficient. They are systematically analyzed for mixtures of inert gases, N₂, O₂, CO₂, and H₂ at temperatures extending from room temperature to 2500°K. It is shown that for the molecular weight ratios m^* = m₂/m₁ considered the expressions for _u and can be radically simplified. With an error acceptable for practical purposes (up to 10%) it is possible to employ expressions of the same structural form as for a single-component gas: for _u if 1 m^* 6, and for if 1 m^* 3. When 1 m^* 2 the expression for _T can be simplified with a maximum error of 5%. Within the limits of accuracy of the method the expression for _t can be linearized in the thermal diffusion coefficient. An approximate expression convenient for practical calculations is proposed for _d Finally, the , _u, and _T for a single-component polyatomic gas with easy excitation of the internal degrees of freedom of the molecules are similarly analyzed; it is shown that these expressions can be considerably simplified.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 152–159, November–December, 1990.     

Flow of a viscous gas in a shock layer with equilibrium chemical reactions

Steady flow of supersonic air over a sphere is examined, allowing for viscosity, heat conduction, and actual physical and chemical processes. Flow in the shock layer at flight speeds in the range 3 km/sec V10 km/sec (10⁴R10⁶) is investigated, under the assumption of local thermodynamic equilibrium. The flow is described by simplified Navier-Stokes equations, which are solved by a finite difference method. The case of a cooled surface is examined. The distribution of gasdynamic parameters is obtained in different flow regimes. The distribution of heat flux and friction coefficient is investigated as a function of the oncoming-stream parameters and the sphere radius. The shape and position of the shock wave are determined, and the stream lines and sonic lines are constructed.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 4, pp. 150–153, July–August, 1970.The authors thank Yu. P. Lun'kin and F. D. Popov for their help in formulating the problem and their constant interest.     

The irrotational waves and the convergence of Levi-Civita's series

Summary The paper shows that the existence of irrotational surface waves established by an investigation of Levi-Civita may be extended till the breaking, but that it is valid when is 0,84 p 1 (and when p₁=np with n whole number). No solution is known till to day when is p<0,84 (and when is 1,00<p₁<<1,68).

---

Sommario La nota estende la dimostrazione dell'esistenza di onde superficiali irrotazionali, data dal Levi Civita per una ampiezza finita ma sufficientemente piccola dimostrando l'esistenza di queste onde fino al frangimento. Tanto questa dimostrazione che quella originaria di Levi Civita sono valide finchè sia 0,84 p 1 (e quando sia p₁=np con n intero). Nessuna soluzione è nota fino ad oggi quando sia p<0,84 (e quando sia 1 p₁ 1,68).

     

On the approximate solution of elastic contact problems for a circular annulus

Paper concerns the Boussinesq and Reissner-Sagoci contact problems for a rigid punch in contact with the plane face of an isotropic elastic half-space over a circular annulusbra. It is shown that a simple combination of the interior and exterior Dirichlet and Neumann solutions for a circle, when expressed in terms of oblate spheriodal coordinates, yields extremely accurate approximate solutions provided that 0b/a0.8.     

Investigation of supersonic viscous flow past a sphere in the presence of subsonic and sonic injection

Supersonic flow past a sphere with a given rate of gas injection along the generator is investigated numerically on the range Re=10²–10⁴. Calculations have been made on the interval 0 90°, where is the angle between the axis of symmetry and the normal to the surface. It is shown that for high subsonic and sonic injection rates it is possible to observe qualitatively new features in the flow structure and in the distribution of the local supersonic flow characteristics around the perimeter of the sphere not previously noted in [9]. In the case of sonic injection the changes in flow structure occur only in the supersonic zone. In the neighborhood of the transition from a subsonic to sonic injection velocity the heat flux has a local maximum, which in absolute value does not exceed the heat flux in the absence of injection. It is shown that there may be qualitative differences in the pressure distribution over the surface of the body with increase in the injection parameter depending on the distribution and value of the injected gas flow rate and, moreover, the number Re.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 83–89, January–February, 1988.     

Calculation of intense blowing on a blunt body and an airfoil

Various aspects of the problem of intense blowing through the surface of bodies have, been theoretically studied by a number of authors, within the framework of inviscid flow theory. A detailed bibliography on this topic is given, e.g., in [1, 2]. The well-known approaches to solution of this problem have a limited area of application. For example, asymptotic methods can be used for hypersonic flow regimes only at relatively low levels of the blown gas momentum ( = ² = _ov_o ²/ V ² 1). The same limitation applies to the numerical method of straight lines [2]. The forward Eulerian calculation schemes [3, 4] smear the contact discontinuity severely, and cannot handle the case where the blown gas and the gas in the incident flow have different thermodynamic properties (_o ). This paper presents results of a numerical investigation of supersonic flow over two-dimensional and axisymmetric bodies with intense blowing on the forward surface, performed using a time-dependent finite-difference method [5] with an explicit definition of the contact interface between the two cases. The calculations encompass a family of elliptic cylinders with semiaxis ratio 0.5 4, a flat-face cylinder, and a flat plate with rounding near the midsection, with variations in the blowing law, the incident flow Mach number M (3 M 10), the adiabatic indices, and the blowing parameter 0 0.5.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 117–124, January–February, 1977.In conclusion, the authors thank T. S. Novikov and I. D. Sandomirskii, who took part In the present calculations.     

Multiple Steady State Solutions Resulting From Coupling Between Mixed Convection And Radiation In An Inclined Channel

In this work, we present a numerical study of mixed convection coupled with radiation in an inclined channel with an aspect ratio B = L/H=10, and locally heated from one side. Convective, radiative and total Nusselt numbers, evaluated on the cold surface and at the exit of the channel, are presented for different combinations of the governing parameters namely, the surface emissivity (0 1), the Reynolds number (10 Re 50), the inclination of the channel with respect to the horizontal surface (0° 90°) and the Rayleigh number (Ra = 10⁵). The ratio, R = Q_C/Q_E, of the heat quantities, leaving the channel through the cold wall, Q_C, and through the exit, Q_E, is presented to identify the most favorable issue to the heat transfer in the studied configuration. The results obtained show that the flow structure is significantly altered by radiation which contributes to reduce or to enhance the number of the solutions obtained.     

Unsteady forced convection heat/mass transfer from a flat plate

Numerical methods are used to investigate the transient, forced convection heat/mass transfer from a finite flat plate to a steady stream of viscous, incompressible fluid. The temperature/concentration inside the plate is considered uniform. The heat/mass balance equations were solved in elliptic cylindrical coordinates by a finite difference implicit ADI method. These solutions span the parameter ranges 10 Re 400 and 0.1 Pr 10. The computations were focused on the influence of the product (aspect ratio) × (volume heat capacity ratio/Henry number) on the heat/mass transfer rate. The occurrence on the plates surface of heat/mass wake phenomena was also studied.     

On flow and stability of a Newtonian fluid past a rotating plane

An exact solution is given for the steady flow of a Newtonian fluid occupying the halfspace past the plane z=0 uniformly rotating about a fixed normal axis (Oz). This solution is obtained in a velocity field of the form considered by Berker [2] and can be deduced as a limiting case, as h+, of the solution to the problem relative to the strip 0zh imposing at z=h either the adherence boundary conditions or the free surface conditions. Furthermore, the stability of this flow, subject to periodic disturbances of finite amplitude, is studied using the energy method and the result is compared with those corresponding to stability of flows in the strip 0zh.

---

Sommario In questa nota si mostra che-oltre alla calssica soluzione di von Karman [1] — esiste, per opportuni valori del gradiente di pressione all'infinito, una soluzione esatta per il moto stazionario di un fluido Newtoniano posto nel semispazio limitato dal piano z=0 uniformemente rotante attorno ad un asse ad esso perpendicolare (Oz). Tale soluzione, ottenuta sulla scia del lavoro di Berker [2], si può dedurre anche come limite, per h+, della soluzione del problema relativo alla striscia 0zh quando sul piano z=h si assegnano o le condizioni di aderenza o le condizioni di frontiera libera. Si studia poi la stabilità di tale moto rispetto a perturbazioni spazialmente periodiche di ampiezza finita col metodo dell'energia e si confronta il risultato ottenuto con quelli relativi alla stabilità dei moti nella striscia 0zh.

     

Possibility of impulsive gas transport through a capillary at high initial pressure in the system (P 0≥100 MPa)

The possibility of impulsive (using a chemical explosive) gas transport at high initial pressure from a secondary into a primary vessel in times 100t175sec has been experimentally demonstrated. In the first 90sec the proposed device is insensitive to the high internal gas pressure. Whent90sec the strength properties of its elements must be taken into account. By this time the amount of gas in the primary vessel has increased by approximately 43% relative to the initial amount. The use of lightweight pistons (titanium, aluminum or magnesium instead of steel) makes it possible to bring the piston travel time within the range insensitive to the strength properties.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 5, pp. 3–9, September–October, 1993.     

Heat transfer process in turbulent flows

A system of differential equations is proposed to describe turbulent flows of incompressible fluid boundary layer type with constant thermophysical characteristics A turbulent temperature conductivity is introduced which is expressed in terms of the energy and scale of turbulence, the dimensionless gradients of the mean velocity and turbulence energy, and the dimensionless distance, to the surface being streamlined. This system is integrated on an electronc computer by the mesh method for the flow in a flat-plate boundary layer with different Prandtl numbers (0.2P100) For air (P=0.71) the system is integrated for nonzero values of the transverse mean velocity component on the streamlined surface (0v_W/U0.0045).Moscow. Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 18–24, July–August, 1972.     

Torsion of two bonded layers by a rigid disk

The problem considered in this paper describes the torsion of a homogeneous isotropic elastic layer (0zd ₁) of finite thickness d ₁, perfectly bonded to another elastic layer (-d ₂z0) of finite thickness d ₂. The problem is reduced to the solution of a Fredholm integral equation of the second kind. The solutions are given for some particular cases.

---

Sommario In questo lavoro si considera il problema della torsione di uno strato elastico omogeneo ed isotropo (0zd ₁) di spessore finito d ₁, perfettamente incollato ad un altro strato elastico (-d ₂z0) di spessore finito d ₂. II problema é ricondotto alla soluzione di una equazione integrale di Freedholm del secondo ordine. Le soluzioni sono ottenute per alcuni casi particolari.

     

Comparison of the Calculated Results for Hypersonic Flow Past Blunt Bodies with the OREX Flight Test Data

The physico-chemical hypersonic air flow model is verified for the conditions of the experimental vehicle OREX reentry path over the altitude range H = 84 –105 km. The calculations are performed on the basis of both the viscous shock layer equations and the complete system of Navier-Stokes equations. The temperature and chemical component concentration fields calculated within the framework of the two models are in good agreement for H 100 km (Re 300). The numerical results for the heat flux at the stagnation point and the electron concentration agree well with the flight test data over the entire altitude range considered.     

Experimental investigation of the resistance to the flow of a conducting fluid in flat insulated ducts in the presence of a transverse magnetic field with allowance for fringe effects and wall roughness

The distribution of pressure, velocity, and electrical potential has been investigated for a mercury flow in insulated rectangular ducts with a large side ratio (Hartmann-type flow). The ranges of variation of the Reynolds, Hartmann, and Stewart numbers were 7·10²R5·10⁵, 0H490, and 0N24, respectively. Special attention is given to the sections of the channel where the flow enters and leaves the magnetic field. In these zones the pressure is sharply nonuniform and the velocity profiles in a plane perpendicular to the field acquire an M shape. A relation is established between the length of the entrance section, where the flow is three-dimensional, and the MHD similarity criteria. It is shown that ducts which are hydraulically smooth in the absence of a magnetic field become increasingly rough as the field grows stronger. Data are obtained on the resistance coefficient for a stabilized flow measured in a magnetic field and on the dependence of the critical Reynolds number on the Hartmann number.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 10–21, July–August, 1971.     

Approximate relationships for the determination of the pressure on the surface of a sphere or cylinder with an arbitrary mach number in the free stream

Numerical calculations have been made [1–4] of the pressure distribution over the surface of a sphere or cylinder during transverse flow in the range 0 /2, where is the angle reckoned from the stagnation point along the meridional plane, and on the basis of these results simple analytical equations have been proposed in order to determine the pressure for arbitrary Mach numbers M in the free stream. The gas is assumed to be ideal and perfect.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 185–188, March–April, 1985.     

Internal waves generated by the turbulent wake of a sphere

Internal waves generated by the turbulent wake of a sphere travelling horizontally through a linearly stratified fluid were studied using shadowgraph and particle-streak photography. The Reynolds and internal Froude number ranges considered were 2,000 Re 12,900 and 2.0 Fi 28.0, respectively. Two quite distinct flow regimes based on the structure of the turbulent wake were identified. In one, the wake is characterized by large-scale coherent structures. In the other, the wake, as viewed on a side-view shadowgraph, grows in a roughly symmetric fashion to a maximum height and then collapses slowly; such flows are termed the smallscale structures regime.Wave lengths and maximum wave heights of the internal waves were measured as functions of Nt and Fi, where N is the Brunt-Väisälä frequency and t the time. It was found that the wave lengths scale well with the streamwise dimension of the spiralling coherent structures. The maximum amplitude of the internal waves were found to scale with the vertical dimension of the turbulent wake, upon varying the internal Froude number.     

Numerical Investigation of the Natural Convection of Water in the Neighborhood of the Density Inversion Point For Grashof Numbers up to 106

The natural convection of fresh water in a square cell is considered at a temperature close to the density inversion temperature for Grashof numbers 2.9 · 10⁴ Gr 10⁶. As a result of the numerical investigation, one steady-state and three self-oscillating regimes are found in addition to the three steady-state flows previously detected earlier and described for low Grashof numbers ( 0 Gr 2 · 10⁵). The basic characteristics of the unsteady flows are analyzed by means of the Fourier method, the fundamental oscillation frequencies are found, and the flow evolution and the variation of the oscillation characteristics with increase in the Gr number are considered.